Displaying publications 81 - 100 of 162 in total

Abstract:
Sort:
  1. Tamadon A, Pons DJ, Clucas D, Sued K
    Materials (Basel), 2019 Oct 01;12(19).
    PMID: 31581446 DOI: 10.3390/ma12193215
    One of the difficulties with bobbin friction stir welding (BFSW) has been the visualisation of microstructure, particularly grain boundaries, and this is especially problematic for materials with fine grain structure, such as AA6082-T6 aluminium as here. Welds of this material were examined using optical microscopy (OM) and electron backscatter diffraction (EBSD). Results show that the grain structures that form depend on a complex set of factors. The motion of the pin and shoulder features transports material around the weld, which induces shear. The shear deformation around the pin is non-uniform with a thermal and strain gradient across the weld, and hence the dynamic recrystallisation (DRX) processes are also variable, giving a range of observed polycrystalline and grain boundary structures. Partial DRX was observed at both hourglass boundaries, and full DRX at mid-stirring zone. The grain boundary mapping showed the formation of low-angle grain boundaries (LAGBs) at regions of high shear as a consequence of thermomechanical nature of the process.
    Matched MeSH terms: Computers
  2. Tanwar G, Chauhan R, Yafi E
    Sensors (Basel), 2021 Feb 22;21(4).
    PMID: 33671822 DOI: 10.3390/s21041527
    We present ARTYCUL (ARTifact popularitY for CULtural heritage), a machine learning(ML)-based framework that graphically represents the footfall around an artifact on display at a museum or a heritage site. The driving factor of this framework was the fact that the presence of security cameras has become universal, including at sites of cultural heritage. ARTYCUL used the video streams of closed-circuit televisions (CCTV) cameras installed in such premises to detect human figures, and their coordinates with respect to the camera frames were used to visualize the density of visitors around the specific display items. Such a framework that can display the popularity of artifacts would aid the curators towards a more optimal organization. Moreover, it could also help to gauge if a certain display item were neglected due to incorrect placement. While items of similar interest can be placed in vicinity of each other, an online recommendation system may also use the reputation of an artifact to catch the eye of the visitors. Artificial intelligence-based solutions are well suited for analysis of internet of things (IoT) traffic due to the inherent veracity and volatile nature of the transmissions. The work done for the development of ARTYCUL provided a deeper insight into the avenues for applications of IoT technology to the cultural heritage domain, and suitability of ML to process real-time data at a fast pace. While we also observed common issues that hinder the utilization of IoT in the cultural domain, the proposed framework was designed keeping in mind the same obstacles and a preference for backward compatibility.
    Matched MeSH terms: Computers
  3. Jing W, Tao H, Rahman MA, Kabir MN, Yafeng L, Zhang R, et al.
    Work, 2021;68(3):923-934.
    PMID: 33612534 DOI: 10.3233/WOR-203426
    BACKGROUND: Human-Computer Interaction (HCI) is incorporated with a variety of applications for input processing and response actions. Facial recognition systems in workplaces and security systems help to improve the detection and classification of humans based on the vision experienced by the input system.

    OBJECTIVES: In this manuscript, the Robotic Facial Recognition System using the Compound Classifier (RERS-CC) is introduced to improve the recognition rate of human faces. The process is differentiated into classification, detection, and recognition phases that employ principal component analysis based learning. In this learning process, the errors in image processing based on the extracted different features are used for error classification and accuracy improvements.

    RESULTS: The performance of the proposed RERS-CC is validated experimentally using the input image dataset in MATLAB tool. The performance results show that the proposed method improves detection and recognition accuracy with fewer errors and processing time.

    CONCLUSION: The input image is processed with the knowledge of the features and errors that are observed with different orientations and time instances. With the help of matching dataset and the similarity index verification, the proposed method identifies precise human face with augmented true positives and recognition rate.

    Matched MeSH terms: Computers
  4. Kakani V, Kim H, Basivi PK, Pasupuleti VR
    Polymers (Basel), 2020 Jul 23;12(8).
    PMID: 32717780 DOI: 10.3390/polym12081631
    The Inverse Gas Chromatography (IGC) technique has been employed for the surface thermo-dynamic characterization of the polymer Poly(vinylidene chloride-co-acrylonitrile) (P(VDC-co-AN)) in its pure form. IGC attributes, such as London dispersive surface energy, Gibbs free energy, and Guttman Lewis acid-base parameters were analyzed for the polymer (P(VDC-co-AN)). The London dispersive surface free energy ( γ S L ) was calculated using the Schultz and Dorris-Gray method. The maximum surface energy value of (P(VDC-co-AN )) is found to be 29.93 mJ·m - 2 and 24.15 mJ·m - 2 in both methods respectively. In our analysis, it is observed that the γ S L values decline linearly with an increase in temperature. The Guttman-Lewis acid-base parameter K a , K b values were estimated to be 0.13 and 0.49. Additionally, the surface character S value and the correlation coefficient were estimated to be 3.77 and 0.98 respectively. After the thermo-dynamic surface characterization, the (P(VDC-co-AN)) polymer overall surface character is found to be basic. The substantial results revealed that the (P(VDC-co-AN)) polymer surface contains more basic sites than acidic sites and, hence, can closely associate in acidic media. Additionally, visual traits of the polymer (P(VDC-co-AN)) were investigated by employing Computer Vision and Image Processing (CVIP) techniques on Scanning Electron Microscopy (SEM) images captured at resolutions ×50, ×200 and ×500. Several visual traits, such as intricate patterns, surface morphology, texture/roughness, particle area distribution ( D A ), directionality ( D P ), mean average particle area ( μ a v g ) and mean average particle standard deviation ( σ a v g ), were investigated on the polymer's purest form. This collective study facilitates the researches to explore the pure form of the polymer Poly(vinylidene chloride-co-acrylonitrile) (P(VDC-co-AN )) in both chemical and visual perspective.
    Matched MeSH terms: Computers
  5. Salahuddin L, Ismail Z, Abd Ghani MK, Mohd Aboobaider B, Hasan Basari AS
    J Eval Clin Pract, 2020 Oct;26(5):1416-1424.
    PMID: 31863517 DOI: 10.1111/jep.13326
    OBJECTIVES: The objective of this study was to identify the factors influencing workarounds to the Hospital Information System (HIS) in Malaysian government hospitals.

    METHODS: Semi-structured interviews were conducted among 31 medical doctors in three Malaysian government hospitals on the implementation of the Total Hospital Information System (THIS) between March and May 2015. A thematic qualitative analysis was performed on the resultant data to deduce the relevant themes.

    RESULTS: Five themes emerged as the factors influencing workarounds to the HIS: (a) typing skills, (b) system usability, (c) computer resources, (d) workload, and (e) time.

    CONCLUSIONS: This study provided the key factors as to why doctors were involved in workarounds during the implementation of the HIS. It is important to understand these factors in order to help mitigate work practices that can pose a threat to patient safety.

    Matched MeSH terms: Computers
  6. Farook TH, Abdullah JY, Jamayet NB, Alam MK
    J Prosthet Dent, 2021 Feb 15.
    PMID: 33602541 DOI: 10.1016/j.prosdent.2020.07.039
    STATEMENT OF PROBLEM: Computer-aided design (CAD) of maxillofacial prostheses is a hardware-intensive process. The greater the mesh detail is, the more processing power is required from the computer. A reduction in mesh quality has been shown to reduce workload on computers, yet no reference value of reduction is present for intraoral prostheses that can be applied during the design.

    PURPOSE: The purpose of this simulation study was to establish a reference percentage value that can be used to effectively reduce the size and polygons of the 3D mesh without drastically affecting the dimensions of the prosthesis itself.

    MATERIAL AND METHODS: Fifteen different maxillary palatal defects were simulated on a dental cast and scanned to create 3D casts. Digital bulbs were fabricated from the casts. Conventional bulbs for the defects were fabricated, scanned, and compared with the digital bulb to serve as a control. The polygon parameters of digital bulbs were then reduced by different percentages (75%, 50%, 25%, 10%, 5%, and 1% of the original mesh) which created a total of 105 meshes across 7 mesh groups. The reduced mesh files were compared individually with the original design in an open-source point cloud comparison software program. The parameters of comparison used in this study were Hausdorff distance (HD), Dice similarity coefficient (DSC), and volume.

    RESULTS: The reduction in file size was directly proportional to the amount of mesh reduction. There were minute yet insignificant differences in volume (P>.05) across all mesh groups, with significant differences (P

    Matched MeSH terms: Computers
  7. PAULEEN ONG, MUHAMMAD SUZURI HITAM, ZAINUDDIN BACHOK, ZAINUDDIN BACHOK, MOHD SAFUAN CHE DIN
    MyJurnal
    At present, marine scientists employ manual method to estimate the components in coral reef environment,where Coral Point Count with Excel extensions (CPCe) software is used to determine the coral reef components and substrate coverage. This manual processis laboriousand time consuming,and needsexpertsto conduct the survey. In this paper, a prototype for estimating the distribution of sand cover in coral reef environment from still images by using colourextraction methods was introduced. The coloursegmentation called delta E was used to calculate the colourdifference between two coloursamples. Another method used wascolourthresholdby setting the range of sand colourpixels. Thesystem was developed by using a MATLAB software withimage processing toolbox. The developed system was semi-automatic computer-based system that can be used by researcherseven with little knowledge and experience to estimatethepercentage of sand coveragein coral reef still images.
    Matched MeSH terms: Computers
  8. Subramaniam A, Singh DKA
    Int J Occup Saf Ergon, 2021 Mar;27(1):48-54.
    PMID: 30465482 DOI: 10.1080/10803548.2018.1543101
    Purpose. The aim of this study was to examine the effects of using a document holder while typing on head excursion and neck muscle activity among computer users with and without neck pain. Method. An experimental study including 52 individuals with (n = 26) and without (n = 26) neck pain was conducted. Head excursion and neck muscle activity were measured using an accelerometer and surface electromyography, respectively. Two-way analysis of variance was conducted to examine the effects of using a document holder between computer users with and without neck pain. Results. The results demonstrated a decrease in head excursion (p 
    Matched MeSH terms: Computers
  9. Lim ZF, Rajendran P, Musa MY, Lee CF
    Vis Comput Ind Biomed Art, 2021 May 20;4(1):14.
    PMID: 34014417 DOI: 10.1186/s42492-021-00080-2
    A numerical simulation of a patient's nasal airflow was developed via computational fluid dynamics. Accordingly, computerized tomography scans of a patient with septal deviation and allergic rhinitis were obtained. The three-dimensional (3D) nasal model was designed using InVesalius 3.0, which was then imported to (computer aided 3D interactive application) CATIA V5 for modification, and finally to analysis system (ANSYS) flow oriented logistics upgrade for enterprise networks (FLUENT) to obtain the numerical solution. The velocity contours of the cross-sectional area were analyzed on four main surfaces: the vestibule, nasal valve, middle turbinate, and nasopharynx. The pressure and velocity characteristics were assessed at both laminar and turbulent mass flow rates for both the standardized and the patient's model nasal cavity. The developed model of the patient is approximately half the size of the standardized model; hence, its velocity was approximately two times more than that of the standardized model.
    Matched MeSH terms: Computers
  10. Farook TH, Barman A, Abdullah JY, Jamayet NB
    J Prosthodont, 2021 Jun;30(5):420-429.
    PMID: 33200429 DOI: 10.1111/jopr.13286
    PURPOSE: Mesh optimization reduces the texture quality of 3D models in order to reduce storage file size and computational load on a personal computer. This study aims to explore mesh optimization using open source (free) software in the context of prosthodontic application.

    MATERIALS AND METHODS: An auricular prosthesis, a complete denture, and anterior and posterior crowns were constructed using conventional methods and laser scanned to create computerized 3D meshes. The meshes were optimized independently by four computer-aided design software (Meshmixer, Meshlab, Blender, and SculptGL) to 100%, 90%, 75%, 50%, and 25% levels of original file size. Upon optimization, the following parameters were virtually evaluated and compared; mesh vertices, file size, mesh surface area (SA), mesh volume (V), interpoint discrepancies (geometric similarity based on virtual point overlapping), and spatial similarity (volumetric similarity based on shape overlapping). The influence of software and optimization on surface area and volume of each prosthesis was evaluated independently using multiple linear regression.

    RESULTS: There were clear observable differences in vertices, file size, surface area, and volume. The choice of software significantly influenced the overall virtual parameters of auricular prosthesis [SA: F(4,15) = 12.93, R2 = 0.67, p < 0.001. V: F(4,15) = 9.33, R2 = 0.64, p < 0.001] and complete denture [SA: F(4,15) = 10.81, R2 = 0.67, p < 0.001. V: F(4,15) = 3.50, R2 = 0.34, p = 0.030] across optimization levels. Interpoint discrepancies were however limited to <0.1mm and volumetric similarity was >97%.

    CONCLUSION: Open-source mesh optimization of smaller dental prostheses in this study produced minimal loss of geometric and volumetric details. SculptGL models were most influenced by the amount of optimization performed.

    Matched MeSH terms: Computers
  11. Norhashila Hashim, Rimfiel B. Janius, Russly Abdul Rahman, Azizah Osman, Zude, Manuela, Shitan, Mahendran
    MyJurnal
    Bananas were chilled at 6oC and the appearance of brown spots when exposed to ambient air, a
    phenomenon known as chilling injury (CI), was detected using computer vision. The system consisted of a digital colour camera for acquiring images, an illumination set-up for uniform lighting, a computer for receiving, storing and displaying of images and software for analyzing the images. The RGB colour space values of the images were transformed into that of HSI colour space which is intuitive to human vision. Visual assessment of CI by means of a browning scale was used as a reference and correlation between this reference values and hue was investigated. Results of the computer vision study successfully demonstrate the potential of the system in substituting visual assessment in the evaluation of CI in bananas. The results indicate significant influence, at α=0.05, of treatment days and temperature on hue. A strong correlation was also found between hue and visual assessment with R>0.85.
    Matched MeSH terms: Computers
  12. Norhafizan Ahmad, Raja Ariffin Raja Ghazilla, Muhammad Zikril Hakim Md Azizi
    MyJurnal
    Brain Computer Interfaces (BCI) provide a vast possibility in enabling the brain to communicate directly with the computer, hence providing an alternative in controlling the machines without much effort. In fields of rehabilitations robotics, the applications of an exoskeletons in assisting a spinal cord injured (SCI) patients were growing. Steady state visually evoked potentials (SSVEP) based BCIs that utilizes the human visual reactions to the constant flickered stimulus quickly showed its potentials among the BCIs used in rehabilitations devices because of its advantages such as a higher immunity to noises and artefacts and also its robustness compared to other BCIs. Rehabilitation exoskeletons demands an approach that are more user friendly and the aspects of control scheme and mechanical parts that are more focused on assisting the patients in rehabilitations and providing a SCI patients an alternatives to explore their surroundings in a more intuitive ways. This paper highlights the current development trends in SSVEP based BCIs for rehabilitation exoskeletons and proposed the potential research scopes in the future that can improve the effectiveness, and its potential applications in rehabilitations.
    Matched MeSH terms: Computers
  13. Hari Krishnan, T.
    MyJurnal
    Introductions: Call center has been defined as a working environment in which uses telephone and computer for the purpose of marketing and manage communication with prospect clients or existing clients (Rocha, Glina, Morinho and Nakasato, 2005; Sprigg, Smith and Jackson, 2003).
    Methodology: The study was conducted via observation of working condition and face to face interview with call center operators. Measurement of anthropometrics was also conducted.
    Results: Ergonomics issues found at call center were inappropriate work condition and workstation which lead to awkward sitting posture (sitting with forward leaning posture, raised shoulder, feet not supported on floor). Besides that organizational policy which required high job demand and subsequently lead to prolonged sitting and static posture (very minimal posture changes). Combination all these factors lead to musculoskeletal symptoms and the operators reported of having neck, shoulder, upper back and lower back pain compared to other body parts.
    Conclusion: The management should embark on organization wide ergonomics management program and should review the current policy and create safe and healthy working environment by providing suitable workstation for the operators in order to prevent musculoskeletal.
    Matched MeSH terms: Computers
  14. Ariffin Abas, Abdul Halim Shaari, Zainal Abidin Talib, Zaidan Abdul Wahab
    MyJurnal
    The computer, together with Lab View software, can be used as an automatic data acquisition system. This project deals with the development of a computer interfacing technique for the study of Hall Effect and converting the existing automation system into a Web-based automation system. The drive board RS 217-3611 with PCI 6025E card and stepper motor RS191-8340 with a resolution of 0.1mm, was used to move a pair of permanent magnets backward and forward against the sample. The General Interface Bus (GPIB) card interfaces, together with digital nano voltmeter and Tesla meter using serial port RS232 interface, are used for measuring the potential difference and magnetic field strength respectively. Hall Effect measurement on copper (Cu) and tantalum (Ta) showed negative and positive sign Hall coefficient. Therefore, the system has electron and hole charge carriers respectively at room temperature. The parameters such as drift velocity, conductivity, mobility, Hall Coefficient and charge carrier concentration were also automatically displayed on the front panel of Lab View programming and compared with standard value. The Web-based automation system can be remotely controlled and monitored by users in remote locations using only their web browsers. In addition, video conferencing through Net Meeting has been used to provide audio and video feedback to the client.
    Matched MeSH terms: Computers
  15. Syed-Mohamad SM, Ali SH, Mat-Husin MN
    Health Inf Manag, 2010 Mar;39(1):30-35.
    PMID: 28683624 DOI: 10.1177/183335831003900105
    This paper describes the method used to develop the One Stop Crisis Centre (OSCC) Portal, an open-source web-based electronic patient record system (EPR) for the One Stop Crisis Center, Hospital Universiti Sains Malaysia (HUSM) in Kelantan, Malaysia. Features and functionalities of the system are presented to demonstrate the workflow. Use of the OSCC Portal improved data integration and data communication and contributed to improvements in care management. With implementation of the OSCC portal, improved coordination between disciplines and standardisation of data in HUSM were noticed. It is expected that this will in turn result in improved data confidentiality and data integrity. The collected data will also be useful for quality assessment and research. Other low-resource centers with limited computer hardware and access to open-source software could benefit from this endeavour.
    Matched MeSH terms: Computers
  16. Sethu, V.S.
    MyJurnal
    Work-related musculoskeletal disorders of the upper limb (WRMSDs-UL) account for one of the largest types of occupational disorders worldwide. This broad term includes several disorders, such as carpal tunnel syndrome, tendonitis, tension neck syndrome and lateral epicondylitis (tennis elbow) which are generally caused by poor postures, repetitive strain and psychosocial factors. Various workplace interventions have been investigated and employed to prevent the different WRMSDs-UL, but a common consensus to address the problem has yet to be achieved. This paper reviews and discusses the efficacies of some interventions which have been tested for the most prevalent type of WRMSDs-UL, carpal tunnel syndrome (CTS). The focus will be on computer users who developed CTS out of the prolonged and repetitive use of keyboards and pointing devices. The interventions studied include engineering design, management strategies, personal development, medical treatment and multi-dimensional approaches. Outcome of the study reveals that the most effective approach would be one that is multi-dimensional in nature, with the inclusion of at least two or more intervention strategies at the same time.
    Matched MeSH terms: Computers
  17. Asif MK, Nambiar P, Khan IM, Aziz ZABCA, Noor NSBM, Shanmuhasuntharam P, et al.
    Radiol Case Rep, 2019 Dec;14(12):1545-1549.
    PMID: 31719943 DOI: 10.1016/j.radcr.2019.10.001
    A patient was referred to the Oral and Maxillofacial Imaging Division and the attending dental specialist suspected a foreign object at the anterior region of the maxilla. The region was scanned using Kodak 9000 3D cone-beam computed tomography (CBCT) extraoral imaging system (Carestream Health, Inc.) to determine the type and morphometric characteristic of foreign object. The CBCT images failed to determine the identity and nature of the foreign object. CBCT images were then exported to the Materialise Interactive Medical Image Control System (Mimics) software to evaluate whether this software can help in enhancing the visualization of the foreign object in the maxillofacial region. The findings showed that there was an improved visualization of the foreign body and the type of the object could be determined with certainty. The object was identified as an endodontic file and was clearly visible when visualized as a reconstructed 3D model in Mimics software. Although the identification of abnormalities has been dramatically improved using 3D scans, the visualization can be further enhanced using image processing software like Mimics.
    Matched MeSH terms: Computers
  18. Abdul Manaf, S.Z., Din, R., Hamdan, A., Mat Salleh, N.S., Kamsin, I.F., Abdul Aziz, J.
    MyJurnal
    At present, the learning activities carried out is in line with the rapid growth of development of technology and lifestyle. ICT literacy is categorised as those who can operate a computer and Internet. This study is conducted to determine the level of computer and Internet literacy in generation Y. A total of ten respondents among university students were interviewed. The level of the skill is measured in terms of the use of information processing systems and the Internet. The new knowledge addresses the themes in information communication technology literacy namely; defining, accessing, assessing, managing, integrating, creating and passing data. As such, the model of computer technology in education can also be produced. A more robust method of learning can be heightened by seeing the level of skills possessed by university students. The findings of this study is expected to determine the level of competence of the students and university can provide the necessary equipment to ensure effective teaching and learning.
    Matched MeSH terms: Computers
  19. Ishak, N.H., Sarbon, N.M.
    MyJurnal
    This study aims to optimize enzymatic hydrolysis process for producing angiotensin I-converting enzyme (ACE) inhibitory peptides from protein hydrolysate of shortfin scad (Decapterus Macrosoma) waste (SWH). The enzymatic hydrolysis conditions, namely the temperature (40, 50, 60°C), time (B: 60, 120, 180 min), pH (C: 7, 8, 9) and enzyme substrate concentrations (D: 1, 2, 3%) on yield, degree of hydrolysis (DH) and ACE-inhibitory activity were analysed. Responses were optimized using the response surface methodology (RSM) by employing four factors, 3-levels and the Central Composite Design (CCD). The optimized conditions were further validated to indicate the validity of the prediction model. The optimal conditions obtained for the hydrolysis conditions were at temperature of 50°C, time of 60 min, pH of 9 and enzyme to substrate concentration of 2.92%. The experimental result for yield was lower than the predicted value, as generated by RSM. However, the degree of hydrolysis of SWH was higher than the predicted value. The ACE inhibitory activity of SWH was 79.34%, and showed lower than the predicted value. Therefore, the optimized conditions of SWH served as good conditions for the production of bioactive peptide with high ACE inhibitory activity.
    Matched MeSH terms: Computers
  20. Seluakumaran K, Shaharudin MN
    Int J Audiol, 2022 Oct;61(10):850-858.
    PMID: 34455907 DOI: 10.1080/14992027.2021.1969455
    OBJECTIVE: To undertake calibration and preliminary validation of a custom-designed computer-based screening audiometer connected to consumer insert phone-earmuff combination for adult pure tone audiometry.

    DESIGN: Part 1 involved electroacoustic measurement and biological calibration of a laptop-earphone pair used for the computer-based audiometry (CBA). Part 2 compared CBA thresholds obtained without a sound booth with those measured using the gold-standard clinical audiometry.

    STUDY SAMPLE: 17 young normal-hearing volunteers (Part 1) and 43 normal and hearing loss subjects (Part 2) recruited from an audiology clinic via convenience sampling.

    RESULTS: The transducer-device combination produced outputs suitable for measuring thresholds down to 0 dB HL. Threshold pairs obtained from the CBA and clinical audiometry were highly correlated (Spearman's correlation coefficient, ρ = 0.92, p 25 dB HL.

    CONCLUSIONS: The use of a computer-based audiometer application with consumer insert phone-earmuff combination can offer a cost-effective solution for boothless screening audiometry.

    Matched MeSH terms: Computers
Filters
Contact Us

Please provide feedback to Administrator (afdal@afpm.org.my)

External Links