MyMedR

Displaying publications 81 - 100 of 193 in total

Abstract:

Sort:

Fulltext Overview of occupational noise management in Malaysia

Noraidah Ismail, Sarah Rahmat

International Journal of Allied Health Sciences, 2018;2(3):445-458.
MyJurnal

This paper aims to synthesize available literature on occupational noise in Malaysia and to relate this to the current noise management practices and control. The review focuses on several main
scopes; i) history of occupational noise management in Malaysia; ii) legislative developments and legal precedents of occupational noise in Malaysia ; and iii) the hearing conservation programs (HCP) and hearing loss prevention programs (HLPP). Narrative review and synthesis. Related publications and references were identified through several ways: i) by structured searches in PubMed, Google scholar, Web of Knowledge and Science Direct using the combinations of ‘occupational noise’, ‘noise induced hearing loss; ‘hearing’, ‘knowledge’, awareness’, ‘hearing conservation program’, ‘hearing protection devices’ as key words ii) by inspecting the reference lists of relevant articles. The number of publications within the audiology which address this topic, is rather limited. All the above mentioned scopes were discussed and synthesis of literature from other related fields such as medical, health and occupational safety and health were also referred to facilitate the discussion. This paper concludes that there are an emerging trend for the studies of occupational noise Malaysia in the literature. However, the effectiveness of HCP in Malaysia, and to what extent it is accepted and being implemented is yet to be investigated.

Matched MeSH terms: Occupational Health
Fulltext Guidelines on occupational exposures to human immunodeficiency virus (HIV), Hepatitis B virus (HBV) and Hepatitis C virus, and recommendations for post exposure prophylaxis (PEP)

ISBN: 978-983-3433-47-6

Citation: Guidelines on occupational exposures to human immunodeficiency virus (HIV), Hepatitis B virus (HBV) and Hepatitis C virus, and recommendations for post exposure prophylaxis (PEP). Putrajaya: Ministry of Health, Malaysia; 2007

Matched MeSH terms: Occupational Health
Fulltext Exposure to microbial contaminants in Metalworking fluids (MWF) and the fractional exhaled nitric oxide (FeNO) levels among machining industry workers

Nurul Maizura Hashim, Zailina Hashim, Rukman Awang Hamat, Hayati Kadir

Malaysian Journal of Medicine and Health Sciences, 2019;15(204):147-152.
MyJurnal

Introduction: Water based Metalworking fluids (MWF) are commonly used in machining industries and are excellent media for microorganism growth. The study aimed at determining the relationship between the airway inflammation as indicated by fractional exhaled nitric oxide (FeNO) with the microbial contaminants of MWF in aerosol and bulk sample as well as the workers’ reported respiratory health symptoms. Methods: This cross sectional study was carried out on 138 machining workers. Their FeNO were measured using NIOX-MINO instrumentation. The microbial as- sessments of bacteria and fungus were carried out on the MWF bulk samples and the aerosol using a sampler DUO SAS SUPER 360TM. Results: Findings showed significant difference in the FeNO levels in workers from various job sections (p=0.01). Significant relationships found between high FeNO levels with their closeness to the machines (p=0.03), high number of machines in the workplaces (p=0.02), high environmental bacteria colonies (p=0.04), lon- ger employment years (p

Matched MeSH terms: Occupational Health
Questionnaires results for data consolidation on occupational safety and health management system among gas contractor in peninsular Malaysia

Hamdan Bin Ramat, Shamsul Bahri Bin Mohd Tamrin, Mohd Rafee Bin Baharuddin, Mansor Bin Ahmad

Journal of Occupational Safety and Health, 2014;11(1):39-45.
MyJurnal

There is a need to develop an Occupational Safety and Health Management System (OSHMS) Critical Success Factors (CSF) Monitoring among gas contractor in Malaysia. Critical Success Factors (CSF) can be used for future implementation, adaptation and practice for gas contractor work for both by clients and contractors in Malaysia. The main purpose of CSF implementation is to reduce the number of accident related with Occupational Safety and Health (OSH). The need for CSF is due to the requirement by law and standard that require companies to establish an arrangement related to the identified OSH risks. The objective of this study is to assess the established of OSHMS among gas contractor in Peninsular Malaysia and to identify the CSF imposed by these industries. A cross sectional study for eighty gas contractor companies using established questionnaire has been done. All data consolidated in order to determine the OSHMS and it CSF among gas contractor in Peninsular Malaysia that has registered with Department of Occupational Safety and Health. Established questionnaire are based on OSHMS MS 1722:2011 elements requirement No 1: Policy, No 2: Organizing, No 3: Planning and Implementation, No 4: Evaluation and No 5: Action for Improvement as parameters to come out with organization means and Z-scores. Descriptive statistic showed that element mean (standard deviation) score for policy is 75(6.6), for Organizing is 63(5.2), for Planning and Implementation is 59(9.4), for Evaluation is 66(5.1) and Action for Improvement is 63(1.3). Percentage of company that complies with the main element for Policy is 15%, for Organizing is 8.8%, for Planning and Implementation is 11.3%, for evaluation is 11.3% and for Action for improvement is 13.8%. Percentage of companies that partially comply with Policy element is distributed between 61.0% to 85.0% which is 76.3 %, for Organizing score is mainly distributed between 46.0% to 60.0% which is 62.5%, for planning and Implementation score for 80 companies distributed mainly in group score between 46.0 to 60.0% which is 56.3 %, for Evaluation the partially comply score is distributed in group score between 61.0% to 85.5% which is 41 % and for Action for Improvement partially comply score, the distribution is mainly distribute in range of 61.0% to 85.0% which is 62.5 %. Z-score for element policy is five points from policy mean, for organizing Z-score is three points from Organizing mean, for Planning and Implementation the Z-score is three points from Planning and Implementation mean, for Evaluation the Z-score is three points from evaluation mean and for Action for improvement Z-score is two to three points from Action for Improvement mean. Percentage of compliance with OSHMS MS 1722:2011 elements by gas contractors in almost main element and sub element are still low and can be further improved by focusing on all company element score for continual improvement of OSH elements compliances.

Matched MeSH terms: Occupational Health
Local exhaust ventilation: past, present, and future

Nor Halim Hasan, Said, M.R., Leman, A.M.

Journal of Occupational Safety and Health, 2013;10(1):9-26.
MyJurnal

Engineering control is a method of controlling the risk of exposure to contaminants. Health effects to industrial workers are more severe whilst high exposure and time exposed to contaminants at workplace. Installation of industrial ventilation or local exhaust ventilation (LEV) system is the proposed method to reduce the risk. This paper discusses the past, present and future relating to LEV system in Malaysia. Current issues related to monitoring reported by Hygiene Technician in compliance with Occupational Safety and Health (Use of Standard Chemical Hazardous to Health Regulation 2000) carried out in several states in Malaysia as a sample. The nanotechnology is a new area at present and future. The involvement of government, employers and employees need to be justified due to the attention to prevent and control of any exposure. It is suggested that using the Computational Fluid Dynamic (CFD) simulation, a new design of LEV system can be upgraded and predicted.

Matched MeSH terms: Occupational Health
Fulltext Kajian sakit belakang dan faktor-faktor yang mempengaruhinya di kalangan pekerja pemasangan industri automotif

Annuar, I., Nurulakhmar, A.S., Mazruras, S., Azhar, A.H.

Malaysian Journal of Community Health, 2010;16(2):10-16.
MyJurnal

Introduction: Back pain associated with sense of pain and less comfort in back part of the body especially at the lower back area. Back pain is an occupational health problem with significant impact to productivity of workers.
Methodology: A cross sectional study was conducted to study the prevalence of back pain towards individual, physical and psychosocial factors associated among body shop’s operators at national Automotive Manufacturers.
Result: A total of 32 operators were involved in this study. Nordic Musculoskeletal questionnaire has been used in this study and body position assessment was done by using Ovako Working Posture Analyzing System (OWAS) method. Study showed the prevalence of back pain among operators throughout their work and in the last 12 months was 93.8% and 87.5% respectively. There are significant association (p0.05) between prevalence of back pain with another individual, physical and psychosocial factor.
Conclusion: This study shows that back pain prevalence were influenced by types of activity and body posture during working at assembling division among workers. Attention should be given to ergonomics factors to prevent back pain incident among automotive industry assembly workers.

Matched MeSH terms: Occupational Health
Fulltext Determination of chemical content of pm10 and tsp using SEM-EDAX

Masitah Alias, Zaini Hamzah

Journal of Nuclear and Related Technologies, 2007;2007(1):217-226.
MyJurnal

The growing concern over the workers safety and health has lead many factories and organizations do the air monitoring to ensure the airborne at their workplace is safe for the worker’s health and complying the Occupational Safety and Health Act 1994 (Act 514). In this study, the monitoring covers an indoor air quality and chemical exposure to the workers in one of the power plant repair shop. A few workers from different sections namely blasting, welding, grinding, fitting and maintenance area were chosen to assist in the personal monitoring for 8 hours measurement. PM10 were measured at a few sampling points to collect dusts for 24 hours duration. The samples were brought back to the laboratory for gravimetric and SEM-EDAX analysis. The results were certainly exceed the limit for air quality, and many elements were detected such as Fe, Ni, Al, Si, Ca, K, Ba, S, Cr, Zn and Cl. The present of these elements shows that exposure to these particulate matters is quite risky and some measure needs to be taken for remedial action.

Matched MeSH terms: Occupational Health
Quantitative measurement of Occupational Safety and Health Management Systems performance

Aziz Basiran, Ismail Bahari

Journal of Occupational Safety and Health, 2012;9(2):31-38.
MyJurnal

Various types of Occupational Safety and Health Management Systems (OSH-MS) exist in the market. Basically, these systems have similar basic principles and even elements. However, the importance of these elements in terms of successful management of OSH differs according to the end-user. OSH Practitioners with different roles and responsibilities have different views on which element or elements contribute significantly to the overall success of OSH management. There are no standardization in terms quantifying the elements that qualifies an OSH-MS. A study was carried out to quantify the implementation of an OSH-MS through the determination of weighing factors for the different elements in an OSH-MS. Respondents for this study comprised of top safety and health management, safety and health officers (SHO) / radiation protection officers (RPO), DOSH officers, auditors and consultants who are very familiar with OSH-MS. Sample of this study was based on purposive sampling due to strict criteria and prerequisites to be met. Questionnaires were distributed to the identified organizations and personnel. Results from this study established that, auditor has the highest level of understanding of OSH-MS compared with top safety and health management, SHO / RPO, DOSH officers and OSH consultants. Among all the elements in the OSH-MS studied for their levels of importance in terms of the overall success of implementing an OSH-MS, OSH policy is the most critical element, followed by hazard identification, risk assessment and control, employee participation, responsibility and accountability and competence and training. The weighing factor for these top 5 elements are OSH policy (0.36); hazard identification, risk assessment and risk control (0.25); employee participation (0.15); responsibility and accountability (0.14); and competence and training (0.10). Application of the weighing factors of these elements allows the quantification of audit status (Audit Score) based on the equation: audit score = 0.36 [OSH Policy] + 0.25 [Hazard Identification, Risk Assessment and Risk Control] + 0.15 [Employee Participation] + 0.14 [Responsibility and Accountability] + 0.10 [Competence and Training]. Minimum tolerable target for each element of an OSH-MS was also determined. The minimum tolerable frequency of OSH policy is reviewed by top management is yearly; the minimum tolerable frequency of risk management is reviewed is yearly; the minimum tolerable percentage of employees who should be made known on relevant legal and other requirements is ≥90%; the minimum tolerable percentage of OSH objectives and programme(s) achieved / implemented is between 80 – 89%; the minimum tolerable percentage of money budgeted for OSH in a year compared to organization revenue is between 1 – 5%; the minimum tolerable number of hours for each employee needed to be trained on OSH per year is between 30 – 39 hours; the minimum tolerable percentage of employees who should be communicated on matters related to OSH is ≥90%; the minimum tolerable percentage of employees participation and involvement in hazard identification, risk assessment and determining controls is ≥90%; the minimum tolerable percentage of employees who should be involved in establishing OSH documents is

Matched MeSH terms: Occupational Health
Emergency response programme in a petrochemical company in Malaysia

Jefferelli Shamsul Bahrin, Mohamad Husain Sajahan, Mohd. Nazri Hamad

Journal of Occupational Safety and Health, 2004;1(1):3-8.
MyJurnal

Malaysia is blessed with oil and gas resources, which form raw materials for the petrochemical industry. The petrochemical industry creates added value to this resource and is an important contributor to the national economy. The petrochemical industry however also creates hazards of which fire or explosions and chemical release are of special concern. These hazards pose a risk not only to workers but also to the surrounding population and environment. To ensure industry is prepared to cope with emergencies, a comprehensive emergency response programme is necessary. This is inline with both the Malaysian Occupational Safety and Health (Control of Industrial Major Accident Hazards) Regulations 1996 and the Responsible Care initiative of the chemical industry. This paper describes elements to be considered in an emergency response programme for industry such as the concept of emergency management, organisation, duties and responsibilities, emergency system, training and mutual aid plans and agreements. We shall provide related examples based on a multinational petrochemical company practice.

Matched MeSH terms: Occupational Health
Fulltext The implementation of OSH management system in small and medium enterprise for sustainable development

Muhammad Hasbullah, M.A., Leman, A.M., Baba, I.

Journal of Occupational Safety and Health, 2015;12(1):91-94.
MyJurnal

Occupational safety and health (OSH) in Small and Medium Enterprises (SMEs) have not received the proper
attention not only in Malaysia, but also in most countries all over the world, in terms of research or support for
implementation. In Malaysia, many agencies such as the Department of Occupational Safety and Health (DOSH),
Social Safety Organization (SOCSO), National Institute of Occupational Safety and Health (NIOSH) and many more
agencies related to OSH have been in collaborations to conduct and promote a safety working environment and to
protect human rights economically, morally and legally. This research mainly focuses on the implementation of the
occupational safety and health in small and medium industries in the southern region of peninsular of Malaysia. This
exploratory study will be based on conducting a survey to 500 SMEs owners and workers throughout the southern
region of Malaysia to get the in-depth knowledge on how the implementation of safety and health management system
in the SMEs will affect them both morally and economically. A site visit will also be conducted in order to enhance
and to get to know the real situation happening in the real working environment. The results of this study will be used
to make and initial evaluation of the implementations of OSH management system in SMEs and hopefully will help
for future interventions and researches.

Matched MeSH terms: Occupational Health
Fulltext Indoor air quality: microbe and its relationship toward temperature, relative humidity and carbon dioxide concentration

Shoffian Amin Jaafar, Suhaily Amran, Mohd Norhafsham Maghpor, Ahmad Sayuti Zainal, Nurzuhairah Jamil, Naemah Tajul Arus, et al.

Journal of Occupational Safety and Health, 2015;12(1):73-80.
MyJurnal

Indoor air quality is a term which refers to the air quality in and around buildings and structures, in which it
is related to the health and comfort of those who are in the building. The study aims to identify the relationship
between environmental factors with microbe growth by investigating the concentration of airborne bacteria and
fungi at National Institute of Occupational Safety and Health (NIOSH) and to determine whether indoor bacteria and
fungi concentration were associated with environmental factors such as temperature relative humidity and carbon
dioxide concentration. This research was conducted concurrently with indoor air quality sampling as per requirement
under the Malaysian Code of Practice of Indoor Air Quality (COP IAQ). The COP IAQ requires minimum of one
sample to be taken from each area. If an area consists of a few separated rooms, each room is sampled and measured
independently. Also this approach was used to determine whether there is a difference of indoor bacteria and fungi
in different microenvironments. Results show that there is a significant correlation between humidity and bacteria
concentration and fungi concentration; and between temperature and bacteria concentration. However, there is no
significant correlation between temperature and fungi concentration. This study has also established significant
difference on bacteria concentration and fungi concentration between microenvironments.

Matched MeSH terms: Occupational Health
Fulltext Relationship between safety climate perception and safety and health management system with occupational accident at small medium industries in Selangor

Noradila Mohamed, Shamsul Bahri Mohd Tamrin

Journal of Occupational Safety and Health, 2016;13(2):63-69.
MyJurnal

The frequency of occupational accident in small medium industries decreased from 2008 in general, but fluctuated each year,
which shows that improvement is needed in handling safety and health of the employees. It is believed that safety climate perception
and occupational safety health management system (OSHMS) influence occupational accident in an organization. A safety audit
checklist and self-administered questionnaire was distributed to the involved small medium industries. The findings show that safety
climate perception was high in small medium industries while OSHMS show low compliance. Findings also showed that there were
significant relationships between safety climate perception and OSHMS with occupational accident in the organizations (p

Matched MeSH terms: Occupational Health
Fulltext Some international perspectives on legislation for the management of human-induced safety risks

Niemand A, Jordaan AJ, Minnaar H

Jamba, 2016;8(2):170.
PMID: 29955305 DOI: 10.4102/jamba.v8i2.170

Legislation that governs the health and safety of communities near major-hazard installations in South Africa is largely based on existing legislation that had been developed in the United Kingdom and other European Union countries. The latter was developed as a consequence of several major human-induced technological disasters in Europe. The history of the evolution of health-and-safety legislation for the protection of vulnerable communities in European Union (EU) countries, France, Malaysia and the USA is explored through a literature survey. A concise comparison is drawn between EU countries, the USA and South Africa to obtain an exploratory view of whether current South-African legislation represents an optimum model for the protection of the health-and-safety of workers and communities near major-hazard installations. The authors come to the conclusion that South-African legislation needs revision as was done in the UK in 2011. Specific areas in the legislation that need revision are an overlap between occupational health and safety and environmental legislation, appropriate land-use planning for the protection of communities near major-hazard installations, the inclusion of vulnerability studies and the refinement of appropriate decision-making instruments such as risk assessment. This article is the first in a series that forms part of a broader study aimed at the development of an optimised model for the regulatory management of human-induced health and safety risks associated with hazardous installations in South Africa.

Matched MeSH terms: Occupational Health
Fulltext Construction occupational safety and health from the perspective of Malaysian residential construction industry

Mohd Hafiidz Jaafar, Kadir Arifin, Kadaruddin Aiyub, Muhammad Rizal Razman, Mark Harris Zuknik

Journal of Occupational Safety and Health, 2016;13(2):23-34.
MyJurnal

Construction industry is one of the major contributors towards Malaysian economy and socio-economy. It is an important
industry gearing Malaysia towards developed nation status. However, fatalities in this industry are a crucial problem. Number of
fatalities in this industry is the highest compare to other industries registered in Malaysia. The contributing factors can be separated
into immediate (human and worksite elements) and underlying (management and external). Occupational safety and health (OSH)
management is a challenge in the construction industry due to its hazardous nature. A framework of construction OSH management
consisting of policy, process, personnel and incentive elements were tested. 13 respondents from 13 residential projects comprising of
high-rise and low-rise in Pulau Pinang were interviewed. It was found that the immediate factors are being more recognized by the
respondents compare to the underlying factors. Human element is perceived as the most significant contributor, while the external
element is the least significant. In terms of construction OSH management, process and personnel elements are the most significant in
developing an effective OSH management programme.

Matched MeSH terms: Occupational Health
Fulltext Analysis of the perception of occupational accidents in mining and quarrying sector towards a safe and healthy working environment

Nur Azlina Abd Rahman, Muhamad Arifpin Mansor, Ahmad Rasdan Ismail

Journal of Occupational Safety and Health, 2015;12(1):165-170.
MyJurnal

The occurrences of occupational accidents and incidents are increasing in parallel with the growth of industries
such as mining and quarrying. The main objective of this study was to analyze data on the perception of occupational
accidents in the mining and quarrying sector in Malaysia. The data was collected and examined based on the
questionnaires on the level of perception of accident investigation in mining and quarrying sector. Statistical data
reported by the Department of Occupational Safety and Health (DOSH) was also reviewed. The findings of this study
prove that the level of perception of workers towards occupational accident issues in mining and quarrying sector
is still in the moderate level with the mean value of 3.28. The findings show that 51.7% of the workers agree while
25.9% totally agree to the accident occurrence. Only 1.7% of the workers are not aware of accident occurrence at the
workplace. Employers and employees must carry out their responsibilities to prevent accidents by adhering to health
and safety practices at the workplace.

Matched MeSH terms: Occupational Health
Fulltext Occupational safety and health management system in Malaysia's southern region: small and medium enterprise case study

Muhammad Hasbullah, M.A., Leman, A.M., Baba, I.

Journal of Occupational Safety and Health, 2015;12(2):81-86.
MyJurnal

Occupational safety and health (OSH) in Small and Medium Enterprises (SMEs) have not received the proper
attention not only in Malaysia, but in most of the countries globally, in terms of research or support for implementation.
This research focuses on the implementation of the occupational safety and health in small and medium industries in
the southern region of peninsular of Malaysia. The objective of this research is to determine the level of awareness of
SME owners and also their employers towards the importance of implementing OSH in their daily tasks. This study
will be based on conducting a survey to 200 SMEs owners and workers throughout the southern region of Malaysia.
The results from this research can be use as a benchmark for other researchers to further enhance the research in this
area.

Matched MeSH terms: Occupational Health
Fulltext The effectiveness of the Occupational Safety and Health Master Plan 2015 (OSH-MP 15) in enhancing government leadership and preventive workplace

Norhafizah Yaacob, Shamsul B.M. Tamrin, Ng, Yee Guan, How, Vivien, Rozanah A. Rahman, Zerguine, Haroun, et al.

Malaysian Journal of Medicine and Health Sciences, 2018;14(2):57-66.
MyJurnal

Background: Occupational Safety and Health Master Plan for Malaysia 2015 was intended to increase awareness, knowledge and commitment to Occupational Safety and Health in all undertaking to reduce the number of injuries, diseases and fatalities. Objectives: The purpose of this study is to determine the effectiveness of Occupational Safety Health Master Plan for Malaysia 2015 (OSH-MP 15) in enhancing government leadership and preventive workplace culture. Methods: This cross sectional study covered all the states in Malaysia, constituting of 309 employers, 350 Occupational Safety Health practitioners and 360 employees as respondents. There were three questionnaires for three different groups which were employers, Occupational Safety Health practitioners and general employees. The respondents were selected through random sampling. Results: For strategy 1, there was a significant difference in mean of effectiveness of OSH-MP15 between sectors for general workers [F (11, 348) =12.06, p= =

Matched MeSH terms: Occupational Health
Fulltext Introduction to customized occupational safety and health website and its effectiveness in improving Psychosocial Safety Climate (PSC) among police officers

Irniza Rasdi, Nadia Farhana Ismail, Andy, Shin Shyen Kong, Suhainizam Muhammad Saliluddin

Malaysian Journal of Medicine and Health Sciences, 2018;14(2):67-73.
MyJurnal

Introduction: The prevalence of stress among Malaysian police is high in which 38.8% polices have severe stress related to work resources and workplace environment. Psychosocial safety climate is one of the indicators that can be used to avoid psychosocial health problems. Objective: This study was conducted to determine the risk factors of psychosocial safety climate and to measure the effectiveness of a customised safety website in improving the safety climate. Methodology: This study involved 105 police officers who were randomly selected from nine different departments in PDRM Bukit Aman. A survey adapted from previous study was used to determine the psychosocial safety climate levels among respondents. Then, occupational safety website was introduced to the respondents and being used for two weeks. Lastly, post survey was done to see the difference of psychosocial safety climate before and after the use of the website. Results and Discussion: Findings showed that team psychological safety (r=0.381, p= , p=

Matched MeSH terms: Occupational Health
Stress management interventions for intensive and critical care nurses: A systematic review

Alkhawaldeh JMA, Soh KL, Mukhtar FBM, Peng OC, Anshasi HA

Nurs Crit Care, 2020 03;25(2):84-92.
PMID: 31840391 DOI: 10.1111/nicc.12489

BACKGROUND: The level of occupational stress of nurses working in intensive and critical care units is high. Although many studies have assessed the effectiveness of stress management interventions among intensive and critical care nurses, the methodological quality of these studies remains unclear.
PURPOSE: The purpose of this review was to summarize and appraise the methodological quality of primary studies on interventions for management of occupational stress among intensive and critical care nurses.
METHODS: This review was reported according to the Preferred Reporting Items for Systematic Reviews and Meta-Analyses (PRISMA) guidelines. A comprehensive literature search was conducted to identify primary studies that assessed the effectiveness of interventions in managing occupational stress among intensive and critical care nurses using multiple databases from January 2009 to June 2019.
RESULTS: Twelve studies published between 2011 and 2019 were eligible for inclusion. These included studies were classified as being of good or fair quality. The consensus across the included studies was that, compared with control condition, cognitive-behavioural skills training and mindfulness-based intervention were more effective in reducing occupational stress among intensive and critical care unit nurses.
CONCLUSION: Further research should focus on methodologically strong studies by blinding the outcome assessors, using Randomized Controlled Trial (RCT) design with an active control group, using standardized assessment tools, and reporting enough details about the stress management intervention-related adverse events.
RELEVANCE TO CLINICAL PRACTICE: This review demonstrates the need for high methodological quality studies to rigorously evaluate the effectiveness of stress management interventions before it can be recommended for use in clinical practice to reduce stress in intensive and critical care unit nurses. In addition, attention should be given to developing research protocols that place more emphasis on interventions aimed at the organization level to address the growing problem of occupational stress among intensive and critical care nurses.

Matched MeSH terms: Occupational Health
Fulltext Adoption of responsible care program in Malaysian chemical industries: current status and way forward

NurKhairlida Muhamad Khai, Khai EL, Mazlin Mokhta, Choo TG, Marlia Mohd Hanafiah, Chan PW, et al.

Malaysian Journal of Public Health Medicine, 2017;17 Special(1):1-6.

Chemical industry is one of the important industries in the world. However, incidents happened due to the release of hazardous materials, toxic and poisonous chemicals in the chemical industries can cause fatal to human and destruction of the environment. Learning from the Bhopal disaster's experience, chemical industries have developed a program - Responsible Care, aiming to regain public trust through improving the environment, health and safety performances. Malaysia has adopted Responsible Care program since 1994 under the stewardship of the Chemical Industries Council of Malaysia (CICM). Six codes of management practices have been developed by the CICM, covering distribution, community awareness and emergency response, pollution prevention, process safety, employee health & safety and product stewardship. It has been more than 20 years since its inception. However, to date, there are only 125 companies have signed the pledge to adopt Responsible Care program. The CICM has also conducted several initiatives to encourage participation of chemical companies to adopt Responsible Care program in Malaysia. Therefore, it is the aim of this paper to review the current status of Responsible Care program in Malaysia and also deliberate the way forward of this program.

Matched MeSH terms: Occupational Health

Filters

Please provide feedback to Administrator (afdal@afpm.org.my)

External Links