Displaying publications 101 - 120 of 135 in total

Abstract:
Sort:
  1. Kadhim Jawad Obaid, Yahya Mohammad Arpine, Nor Salmah Bakar, Marlina Tanty Ramli Hamid, Ahmed Ramzi Yusof
    Intramuscular shoulder angiomyolipomas are very rare. We report a case in a 22-year-old male with a well circumscribed lesion located on the back of the shoulder. This lesion, differs from renal angiomyolipoma in terms of non-association with tuberous sclerosis, circumscription and male predominance. Another characteristic feature is the absence of epithelioid cells. Differential diagnosis includes lipoma, angiolipoma, angioleiomyoma, hemangioma, myolipoma and liposarcoma. It is distinguished from the above mentioned entities by the presence of a combination of thick-walled blood vessels, smooth muscle and fat.
    Matched MeSH terms: Shoulder
  2. Chiu CK, Tan RL, Gani SMA, Chong JSL, Chung WH, Chan CYW, et al.
    Asian Spine J, 2021 May 07.
    PMID: 33957021 DOI: 10.31616/asj.2020.0649
    Study Design: Retrospective study.

    Purpose: To report the perioperative and radiological outcomes of single-stage posterior passive correction and fusion (SSPPCF) in adolescent patients who present with congenital scoliosis.

    Overview of Literature: The surgical treatment for congenital scoliosis is complex. There is no definitive guide on surgical options for skeletally matured adolescent patients who have congenital scoliosis.

    Methods: Patients with congenital scoliosis who underwent SSPPCF using a pedicle screw system were reviewed. We identified the following three surgical indications: (1) hemivertebra or wedge vertebra over the thoracic or thoracolumbar region with structural lumbar curves, (2) hemivertebra or wedge vertebra at the lumbar region with significant pelvic obliquity or sacral slanting, and (3) mixed or complex congenital scoliosis. The demographic, perioperative, and radiographic data of these patients were collected.

    Results: Thirty-four patients were reviewed. The mean patient age was 14.6±3.4 years. There were 13 hemivertebrae, three wedged vertebrae, two butterfly vertebrae, three hemivertebrae with butterfly vertebra, eight unsegmented bars, and five multiple complex lesions. The average surgical duration was 219.4±68.8 minutes. The average blood loss was 1,208.4±763.5 mL. Seven patients required allogeneic blood transfusion. The mean hospital stay duration was 6.1±2.5 days. The complication rate was 11.8% (4/34): one patient had severe blood loss, one had rod breakage, and two had distal adding-on. The Cobb angle reduced from 65.9°±17.4° to 36.3°±15.3° (p<0.001) with a correction rate (CR) of 44.8%±17.4%. The regional kyphotic angle decreased from 39.9°±20.5° to 27.5°±13.9° (p=0.001) with a CR of 19.3%±49.6%. Radiographic parameters (radiographic shoulder height, clavicle angle, T1 tilt, cervical axis, pelvic obliquity, coronal balance, and apical vertebral translation) showed significant improvement postoperatively.

    Conclusions: SSPPCF was a feasible option for adolescent patients with congenital scoliosis who were skeletally matured.

    Matched MeSH terms: Shoulder
  3. Doi K, Sem SH, Ghanghurde B, Hattori Y, Sakamoto S
    J Brachial Plex Peripher Nerve Inj, 2021 Jan;16(1):e1-e9.
    PMID: 33584849 DOI: 10.1055/s-0041-1722979
    Objectives  The purpose of this study was to report the functional outcomes of phrenic nerve transfer (PNT) to suprascapular nerve (SSN) for shoulder reconstruction in brachial plexus injury (BPI) patients with total and C5-8 palsies, and its pulmonary complications. Methods  Forty-four out of 127 BPI patients with total and C5-8 palsies who underwent PNT to SSN for shoulder reconstruction were evaluated for functional outcomes in comparison with other types of nerve transfers. Their pulmonary function was analyzed using vital capacity in the percentage of predicted value and Hugh-Jones (HJ) breathless classification. The predisposing factors to develop pulmonary complications in those patients were examined as well. Results  PNT to SSN provided a better shoulder range of motion significantly as compared with nerve transfer from C5 root and contralateral C7. The results between PNT and spinal accessory nerve transfer to SSN were comparable in all directions of shoulder motions. There were no significant respiratory symptoms in majority of the patients including six patients who were classified into grade 2 HJ breathlessness grading. Two predisposing factors for poorer pulmonary performance were identified, which were age and body mass index, with cut-off values of younger than 32 years old and less than 23, respectively. Conclusions  PNT to SSN can be a reliable reconstructive procedure in restoration of shoulder function in BPI patients with total or C5-8 palsy. The postoperative pulmonary complications can be prevented with vigilant patient selection.
    Matched MeSH terms: Shoulder
  4. Mohd Sallehuddin H, Zamzuri Z, Ariff MS, Mohd Shukrimi A, Mohamed Azril MA, Nazri MY
    MyJurnal
    Introduction: This is a cross-sectional study of 37 patients with AO type C (complete intra-articular) fractures of the distal radius, evaluating the functional, anatomical, and patient rated outcomes one year after primary fixation with a volar locking plate.

    Methods: Functional outcomes were assessed based on the grip strength, and the range of motion of forearm and wrist. Anatomical outcomes were assessed based on the radial inclination, radial height, volar tilt, and articular step or gap. Patient rated outcome was measured with a Disability of arm, shoulder and hand (DASH) questionnaire.

    Results: One year after surgery, 24 (64%) patients achieved good and excellent anatomical results, and DASH scores were acceptable in 73% of patients. Most of the patients had achieved 80% of their grip strength. The mean DASH score of 12.3 was comparable with other studies. Grip strength, radial inclination and volar tilt had a significant correlation with the DASH score.

    Conclusion: Volar locking plates can be used to achieve optimal reduction in all three parameters in the treatment of AO type C fractures of the distal radius. Versatile fracture fragment reduction and angular stability enable rehabilitation hence obtaining good functional outcomes.
    Matched MeSH terms: Shoulder
  5. Nurrulhidayah, A.F., Arieff, S.R., Rohman, A., Amin, I., Shuhaimi, M., Khatib, A.
    MyJurnal
    Differential scanning calorimetry (DSC) is developed and used for detection of butter adulteration with lard. Butter has the similar characteristics to lard makes lard a desirable adulterant in butter. DSC provides unique thermal profiling for lard and butter. In the heating thermogram of the mixture, there was one major endothermic peak (peak A) with a smaller shoulder peak embedded in the major peak that gradually smoothed out to the major peak as the lard percent increased. In the cooling thermogram, there were one minor peak (peak B) and two major exothermic peaks, peak C which increased as lard percent increased and peak D which decreased in size as the lard percent increased. From Stepwise Multiple Linear Regression (SMLR) analysis, two independent variables were found to be able to predict lard percent adulteration in butter with R2 (adjusted) of 95.82. The SMLR equation of lard percent adulteration in butter is 293.1 - 11.36 (Te A) - 2.17 (Tr D); where Te A is the endset of peak A and Tr D is the range of thermal transition for peak D. These parameters can serve as a good measurement parameter in detecting lard adulteration in butter. DSC is a very useful means for halal screening technique to enhance the authenticity of Halal process.
    Matched MeSH terms: Shoulder
  6. Padmanathan V, Joseph L, Omar B, Nawawi R
    Int J Occup Med Environ Health, 2016;29(5):725-34.
    PMID: 27518883 DOI: 10.13075/ijomeh.1896.00659
    Occupational tasks of linemen are highly associated with the development of work related musculoskeletal disorders (WRMDs). Although linemen are prone to develop WRMDs, there is paucity of information on the prevalence of WRMDs and related occupational causative factors. Therefore, the present review was conducted to report on the prevalence of WRMDs and to outline causative risk factors within occupational tasks in the lineman profession. Literature search was conducted in various databases such as Scopus, PubMed and ScienceDirect for articles published between 1996-2013. The articles were analyzed, selected and retrieved based on predetermined objectives, inclusion criteria and Medical Subject Headings (MeSH). In the review process only articles published in English were considered. The review identified moderate to high prevalence of WRMDs among the linemen population. Back and shoulder regions were highly affected compared to the other body regions. The review also reported occupational tasks such as bar installation, insulator fixation and manual handling of tools as high risk tasks that lead to the development of WRMDs. In addition, occupational tools such as ladders, manual cutters and manual presses were also identified as a potential ergonomic hazard. In conclusion, the current review identified that WRMDs are common in the back and shoulder regions among linemen. Also, a number of occupational risk factors were identified to be associated with WRMDs among the linemen. Hence, future research on prevention and intervention studies concerning lineman profession population in order to develop a good job practice are recommended. Int J Occup Med Environ Health 2016;29(5):725-734.
    Matched MeSH terms: Shoulder
  7. Mirta Widia, Siti Zawiah Md Dawal, NukmanYusoff
    MyJurnal
    Extensive research has been carried out over the years to determine the maximum acceptable weight that a worker is capable of lifting in a given situation among the Occidental populations in the Europe and US. At present, there is a scarcity of studies in which lifting frequency is used as the measuring variable, especially in developing countries such as Malaysia. Therefore, the objective of this study is to determine the effects of lifting loads on the maximum acceptable frequency limit (MAFL), physiological response (muscle activity) and rating of perceived exertion (RPE) for asymmetric lifting and lowering tasks of Malaysian males.Ten male subjects are recruited in this study and they perform asymmetric lifting and lowering tasks repetitively for 30 minutes. Two lifting loads are considered (1) 1 kg and (2) 5 kg. Each of the subjects adjusts his frequency of lifting using a psychophysical approach. The subjects are instructed to perform the lifting and lowering task as fast as they could over duration of 30 minutes without exhausting themselves or becoming overheated. Electromyography (EMG) signals are recorded from four muscles (Right Erector Spinae (RES), Left Erector Spinae (LES), Right Trapezius p Descendenz (RTD) and Left Trapezius p Descendenz (LTD) and analysed in terms of the normalized MVC during asymmetric lifting and lowering tasks. The ratings of perceived exertion (RPE) for four body parts (arms, lower back, shoulders and entire body) are also collected after the subjects have completed the lifting and lowering task. The mean frequency of the lifting and lowering task obtained from the experiment is 13.41 and 9.66 times/minute for a lifting load of 1 and 5 kg, respectively. The results of the independent sample t-test show that load has a statistically significant effect on the maximum acceptable frequency limit (p < 0.05). However, it is found that even though there is an increase in muscle activity and RPE with an increase in lifting load, there is no significant difference in the overall mean muscle activity and RPE (p > 0.05). The percentage decrease in the maximum acceptable frequency for Malaysian males is higher than the Occidental populations for both of the loads investigated in this study.
    Matched MeSH terms: Shoulder
  8. Adib Asmawi Mohd Yusoff, Irniza Rasdi, Ahmed S. Mahmoud Ben Hameid, Karmegam Karuppiah
    MyJurnal
    Ergonomic is important in classroom. Sitting for protracted period in class may lead students to develop musculoskeletal disorders. Their physical health and performance in the class may increase by designing school furniture that match with human body. In Malaysia, there is a lack of ergonomic assessment for school environment especially in urban areas. The aim of this study is to determine the mismatch between the furniture dimension and anthropometric parameters among primary school children in Putrajaya. This is a cross-sectional study which involved 100, Year 1 and Year 6 primary school students randomly selected in Putrajaya. Five anthropometric measurements (popliteal height, buttock popliteal length, elbow height, shoulder height (sitting), hip breadth) as well as five furniture dimensions (seat height, seat depth, seat width, backrest height and seat to desk height) were measured. Instrument used is Martin type anthropometer set, SECA body meter, and SECA weighing scale. Calculation for determining mismatch between the furniture and anthropometric measures were calculated using a standard mismatch formula. There was 100% mismatch for seat height, seat depth, and seat to seat to desk height for Year 1. As for Year 6, mismatch was reported 100% for backrest height and seat to desk height. There were significance difference for parameters of popliteal height between Year 1 and Year 6 and between male and female of Year 1. There was a presence of mismatch between furniture dimension and children anthropometric measurement. Proposed dimension of furniture shows decrease in percentage of mismatch for the most parameter of anthropometric measurement.
    Matched MeSH terms: Shoulder
  9. Ng CK, Azuhairy A, Tan LH, Nordin A
    Malays Orthop J, 2015 Jul;9(2):51-53.
    PMID: 28435611 MyJurnal DOI: 10.5704/MOJ.1507.001
    Chondrosarcoma is the third most common primary tumour of the bone, after myeloma and osteosarcoma. Most of the chondrosarcoma grow slowly and rarely metastasize, and they have an excellent prognosis after adequate surgery. However most of them are chemo or radio-resistant. We report a case of primary chondrosarcoma of proximal humerus in a 36-year-old female who presented with a six years history of left shoulder swelling and restricted range of motion. Trucut biopsy showed a well-differentiated chondrosarcoma. The patient underwent forequarter amputation of left upper limb and was started on chemotherapy following operation.
    Matched MeSH terms: Shoulder
  10. Ruhaizin Sulaiman, Zahari Taha, Siti Zawiah Md. Dawal
    MyJurnal
    Elderly are exposed to physical impairment. This has a strong impact on their daily activities including
    frying, which is one of the most popular cuisine preparations. The stove height and work envelope
    are two major ergonomic issues in performing cooking task. There has been little research focusing
    on Malaysian elderly task performing in addressing these issues. The objectives of this study were to
    identify the acceptable stove height and depth and to determine the working envelope among Malaysian
    elderly using anthropometric data. A total of 55 Malaysian elderly (25 male and 30 female) aged between
    60 to 85 years participated in this study. Five body measurements were taken from each subject using
    an anthropometer. The measurements are stature height, shoulder height, arm span, arm reach forward
    and waist height. Apart from these anthropometric measurements, their present stove height was also
    measured. The acquisition of stove height dimensions was performed through a series of door to door
    visit of the elderly homes in Kg. Sg. Merab. These variables were used to estimate the elderly working
    envelope and determine the stove height, width and depth. Data were analysed using SPSS software. The
    waist height dimension was to estimate the stove height, the arm reach forward for the depth and the arm
    span for the length of the table-top where the stove was placed. Meanwhile the stature and shoulder height
    were used for estimating the position of the overhead compartment or placement of cooking utensils.
    The 5
    th
    percentile was chosen since it is appropriate to accommodate 90% of the studied population. The 5
    th
    percentile was also applied for the setting
    of the working envelope so as to provide better
    reaching tolerances. Meanwhile, standard was used
    to compare the present state of the studied kitchen
    setting. The results show that 56.4% of the elderly
    waist height is lower than the standard table-top
    height which is 36 inches (91.4cm) and 36.4% of the stove height was found higher than that of the standard. This could apparently cause fatigue and
    discomfort to shoulders, the neck, the arm and the back of the user. Anthropometrics measurements can
    be used for estimating the stove height, length and depth. These could also calculate a space taken for
    certain physical activities, such as frying task envelope. Providing a good combination of stove height,
    length, depth and ergonomic working envelope could hopefully improve the elderly cooking task and
    increase their quality of life.
    Matched MeSH terms: Shoulder
  11. Erna Faryza, Mohd Suleiman Murad, Syamsul Anwar
    MyJurnal
    The computer is well known as one of the important tools in the office that gives a lot of benefits but silently leads to musculoskeletal pain. There are many different kinds of musculoskeletal complaints pain but the most common seen among computer users in developed countries is the complaint of arm, neck and shoulder (CANS). Despite this, definite factors that can be associated with the prevalence of CANS have not been established. This study was conducted to identify the prevalence and factors associated with work-related complaints of arm, neck and shoulder (CANS) among office workers in Selangor and Kuala Lumpur. A survey study design was conducted where 110 (n=110) office workers were recruited from around the Selangor and Kuala Lumpur area for 5 months periods. Participants were required to answer the Maastricht Upper Extremity Questionnaire (MUEQ) and the Level of Ergonomic Knowledge Questionnaire. The study showed the highest percentage of CANS reported was at neck region (53.6% of participants), followed by shoulders with 53.0%. The majority of participants have low level of computer ergonomic awareness where only 19.09% (n=21) from government sector and 10% (n=11) office workers from private sector reported knowledge of ergonomics. Majority of the participants did not have the know-how in implementing correct computer ergonomics. However there was a weak association (r=
    Matched MeSH terms: Shoulder
  12. Kapil-Mani KC, Acharya P, Arun S
    Malays Orthop J, 2018 Mar;12(1):15-20.
    PMID: 29725507 DOI: 10.5704/MOJ.1803.003
    Introduction: Various treatment modalities are available but no consensus has been reached for optimal treatment of lateral third clavicle fractures. Precontoured locking plates with broad lateral end for multiple screws fixation is a newly designed plate for lateral third clavicle fractures. The objective of our study was to analyse the functional outcomes as well as complications of this technique in a significant number of cases with long follow-up duration. Materials and Methods: Forty-six patients with distal third clavicle fractures were treated by precontoured clavicular locking plate with broad lateral end. Functional outcomes were assessed on the basis of Constant-Murley Shoulder Outcome Score and University of California, Los Angeles (UCLA) Shoulder Rating Score, active shoulder range of motion, time for fracture union and coraco-clavicular distance. Results: The mean Constant-Murley score was 92.56±4.47 (range: 79-98) for injured side and 96.22±2.23 (range: 90-100) for normal side with p-Value 0.56. Mean coraco-clavicular distance at final follow-up was 10.52±1.13 mm (range 9.7 to 11.7 mm) in injured side and 10.25±0.98 mm (range 9.6 to 11.2 mm) in normal side. Mean UCLA Shoulder Rating Score was 32.55±2.12 (range: 27-34) for injured side and 33.46±1.88 (range: 31- 35) on normal side with p value 0.58. No major complications that necessitated revision of surgery occurred in our study. Conclusion: This newly designed plate seemed extremely useful in successful union of lateral third clavicle fractures, with reduced rate of complications like fixation failures, iatrogenic rotator cuff injury, AC joint osteoarthritis and sub-acromial bursitis, with good functional outcomes.
    Matched MeSH terms: Shoulder
  13. Rusli R, Haque MM, Saifuzzaman M, King M
    Traffic Inj Prev, 2018;19(7):741-748.
    PMID: 29932734 DOI: 10.1080/15389588.2018.1482537
    OBJECTIVE: Traffic crashes along mountainous highways may lead to injuries and fatalities more often than along highways on plain topography; however, research focusing on the injury outcome of such crashes is relatively scant. The objective of this study was to investigate the factors affecting the likelihood that traffic crashes along rural mountainous highways result in injuries.

    METHOD: This study proposes a combination of decision tree and logistic regression techniques to model crash severity (injury vs. noninjury), because the combined approach allows the specification of nonlinearities and interactions in addition to main effects. Both a scobit model and a random parameters logit model, respectively accounting for an imbalance response variable and unobserved heterogeneities, are tested and compared. The study data set contains a total of 5 years of crash data (2008-2012) on selected mountainous highways in Malaysia. To enrich the data quality, an extensive field survey was conducted to collect detailed information on horizontal alignment, longitudinal grades, cross-section elements, and roadside features. In addition, weather condition data from the meteorology department were merged using the time stamp and proximity measures in AutoCAD-Geolocation.

    RESULTS: The random parameters logit model is found to outperform both the standard logit and scobit models, suggesting the importance of accounting for unobserved heterogeneity in crash severity models. Results suggest that proportion of segment lengths with simple curves, presence of horizontal curves along steep gradients, highway segments with unsealed shoulders, and highway segments with cliffs along both sides are positively associated with injury-producing crashes along rural mountainous highways. Interestingly, crashes during rainy conditions are associated with crashes that are less likely to involve injury. It is also found that the likelihood of injury-producing crashes decreases for rear-end collisions but increases for head-on collisions and crashes involving heavy vehicles. A higher order interaction suggests that single-vehicle crashes involving light and medium-sized vehicles are less severe along straight sections compared to road sections with horizontal curves. One the other hand, crash severity is higher when heavy vehicles are involved in crashes as single vehicles traveling along straight segments of rural mountainous highways.

    CONCLUSION: In addition to unobserved heterogeneity, it is important to account for higher order interactions to have a better understanding of factors that influence crash severity. A proper understanding of these factors will help develop targeted countermeasures to improve road safety along rural mountainous highways.

    Matched MeSH terms: Shoulder
  14. Lim E, Lim R, Suhaimi A, Chan BT, Wahab AKA
    J Back Musculoskelet Rehabil, 2018;31(6):1041-1047.
    PMID: 30149436 DOI: 10.3233/BMR-171042
    BACKGROUND: Low frequency sound wave stimulation therapy has become increasingly popular in the rehabilitation fields, due to its ease, less fatiguing and time efficient application.

    OBJECTIVE: This 12-week pilot study examines the efficacy of applying low frequency sound wave stimulation (between 16-160 Hz) through both hands and feet on relieving pain and improving functional ability in patients with chronic back pain.

    METHODS: Twenty-three participants with chronic shoulder (eleven participants) or low back pain (twelve participants) underwent a 12-week vibration therapy program of three sessions per week. A low frequency sound wave device comprising four piezoelectric vibration-type tactile tranducers enclosed in separate 5-cm diameter circular plates, which generate sinusoidal vibratory stimuli at a frequency of 16-160 Hz, was used in this study. Primary outcome measure was pain sensation measured using the Visual Analogue Scale (P-VAS). The secondary outcome measures were pain-related disability measured using the pain disability index (PDI) and quality of life measured using the SF-12.

    RESULTS: At week 12, significant reductions in pain sensation and pain-related disability were observed, with mean reductions of 3.5 points in P-VAS and 13.5 points in the PDI scores. Sixty-five percent of the participants had a reduction of at least 3 points on the P-VAS score, while 52% participants showed a decrease of at least 10 points in the PDI score. Significant improvement was observed in the SF-12 physical composite score but not the mental composite score.

    CONCLUSIONS: The preliminary findings showed that passive application of low frequency sound wave stimulation therapy through both hands and feet was effective in alleviating pain and improving functional ability in patients with chronic back pain.

    Matched MeSH terms: Shoulder
  15. Mohamad Shariff A. Hamid, Stella Jane Joseph Rajah
    Sains Malaysiana, 2015;44:1473-1479.
    This study assessed the effects of progressive resistance exercise programmes on self-reported health related quality of life, body composition and muscle strength among patients with HIV. Twenty-nine men with HIV were randomly assigned to progressive resistance exercise programme using elastic band (PRE group) (n=14) or resistance exercise programme without elastic band (comparative group) (n=15). Both groups underwent exercise programmes for 12 weeks. Selfreported health related quality of life, body compositions and isometric shoulder lift strength were assessed at baseline and at week 12. Ten and nine men in the intervention and comparative groups, respectively, completed the 12-week programme. Participants in the comparative group showed significant improvements in the domain of mental health (p<0.05). No significant changes in all body composition parameters were found in both groups with time. Both groups showed significant improvements in peak and average shoulder lift strength (intervention, p=0.001; p=0.001; control, p=0.008; p=0.016). Progressive resistance exercise programmes significantly improves shoulder lift strength, showed positive effects on self-reported health related quality of life scores among patients with HIV.
    Matched MeSH terms: Shoulder
  16. Mohamad Isa MZ, Mohamed-Yassin MS, Abdul Kadir RF
    Clin Pract, 2020 Mar 31;10(1):1218.
    PMID: 32373307 DOI: 10.4081/cp.2020.1218
    Necrotizing fasciitis is a severe and progressive infection of deep soft tissues which results in destruction of the fascia and overlying subcutaneous fat. We report a case of a 45-year-old diabetic gentleman who initially presented with left shoulder pain, which was treated symptomatically. Upon representation, he had fever and the pain extended to his left upper back. There was a warm, firm and mildly tender purplish swelling on his mid to the left upper back. Blood tests revealed significantly elevated white cell counts and C-reactive protein. A CT thorax showed extensive soft tissue gas within the deep and superficial fascial layers of his left upper back. Necrotizing fasciitis was confirmed intraoperatively. The diagnosis of this condition is often difficult as early symptoms can be mild and nonspecific. A high Laboratory Risk Indicator for NECrotizing fasciitis (LRINEC) score may be helpful to rule in this diagnosis and guide further management.
    Matched MeSH terms: Shoulder Pain
  17. Imma II, Nizlan NM, Ezamin AR, Yusoff S, Shukur MH
    Malays Orthop J, 2017 Jul;11(2):30-35.
    PMID: 29021876 MyJurnal DOI: 10.5704/MOJ.1707.012
    Introduction: The aims of this study are to define the coracoid process anatomy in a Malaysian population, carried out on patients in Hospital Serdang with specific emphasis on the dimension of the base of coracoid process which is important in coraco-acromial (CC) ligament reconstruction, to define the average amount of bone available for use in coracoid transfer, and to compare the size of coracoid process based on gender and race, and with findings in previous studies. Materials and Methods: Fifteen pairs of computed tomography (CT) based 3-dimensional models of shoulders of patients aged between 20 to 60 years old were examined. The mean dimensions of coracoid were measured and compared with regards to gender and race. The data were also compared to previously published studies. Results: The mean length of the coracoid process was 37.94 ± 4.30 mm. Male subjects were found to have larger-sized coracoids in all dimensions as compared to female subjects. The mean tip of coracoid dimension overall was 19.99 + 1.93mm length × 10.03 + 1.48mm height × 11.63 + 2.12mm width. The mean base of coracoid dimension was 18.96 + 3.71mm length × 13.84 + 1.76mm width. No significant differences were observed with regards to racial denomination. The overall coracoid size measurements were found to be smaller compared to previous studies done on the Western population. Conclusion: This study may suggest that Malaysians have smaller coracoid dimension compared to Caucasians. The findings further suggest that the incidence of coracoid fracture and implants pull out in Malaysian subjects may be higher.
    Matched MeSH terms: Shoulder
  18. Kadhim Jawad Obaid, Yahya Mohammad Arpine, Nor Salmah Bakar, Marlina Tanty Ramli Hamid, Ahmed Ramzi Yusof
    MyJurnal
    Intramuscular shoulder angiomyolipomas are very rare. We report a case in a 22-year-old male with a well circumscribed lesion located on the back of the shoulder. This lesion, differs from renal angiomyolipoma in terms of non-association with tuberous sclerosis, circumscription and male predominance. Another characteristic feature is the absence of epithelioid cells. Differential diagnosis includes lipoma, angiolipoma, angioleiomyoma, hemangioma, myolipoma and liposarcoma. It is distinguished from the above mentioned entities by the presence of a combination of thick-walled blood vessels, smooth muscle and fat.
    Matched MeSH terms: Shoulder
  19. Shariat A, Cleland JA, Danaee M, Kargarfard M, Moradi V, Bahri Mohd Tamrin S
    Iran J Public Health, 2018 Nov;47(11):1756-1762.
    PMID: 30581794
    Background: The Rapid Office Strain Assessment (ROSA) is a tool employed online to screen office workstations, which may require modification to decrease musculoskeletal discomfort of workers. This study aimed to examine if the ROSA is able to evaluate pain severity in the lower back, shoulder and neck of office workers accurately.

    Methods: Overall, 142 participants (height: 1.80 ± 0.15 m, BMI: 26.08± 6.70, age: 35±15 yr) with at least a year of working experience completed both questionnaires, the online ROSA and the Cornell musculoskeletal discomfort, in 2016 in Malaysia.

    Results: Relationship between the total scores of both questionnaires for lower back, shoulder and neck pain were significant but exhibited a weak to moderate relationship (range of r values from 0.012 (CI 95%, -0.153-0.176) to 0.503 (CI 95%, 0.369-0.616).

    Conclusion: The online ROSA does not appear to be a reasonable tool for evaluating the severity of lower back, shoulder and neck pain among office workers as the correlations were low. We suggest continued use of the musculoskeletal discomfort questionnaire. Additional studies are required to further examine the ROSA for other anatomical regions.

    Matched MeSH terms: Shoulder
  20. Chiu CK, Chan CYW, Tan PH, Goh SH, Ng SJ, Chian XH, et al.
    Spine (Phila Pa 1976), 2020 Mar 15;45(6):E319-E328.
    PMID: 31593064 DOI: 10.1097/BRS.0000000000003275
    STUDY DESIGN: Retrospective study.

    OBJECTIVE: The primary objective of this study was to assess the conformity of the radiological neck and shoulder balance parameters throughout a follow-up period of more than 2 years.

    SUMMARY OF BACKGROUND DATA: Postoperative shoulder and neck imbalance are undesirable features among Adolescent Idiopathic Scoliosis patients who underwent Posterior Spinal Fusion. There are many clinical and radiological parameters used to assess this clinical outcome. However, we do not know whether these radiological parameters conform throughout the entire follow-up period.

    METHODS: This was a retrospective study done in a single academic institution. Inclusion criteria were patients with scoliosis who underwent posterior instrumented spinal fusion with pedicle screw fixation and attended all scheduled follow-ups for at least 24 months postoperatively. Radiological shoulder parameters were measured from both preoperative antero-posterior and postoperative antero-posterior radiographs. Lateral shoulder parameters were: Radiographic Shoulder Height, Clavicle Angle (Cla-A), Clavicle-Rib Intersection Difference, and Coracoid Height Difference. Medial shoulder and neck parameters were: T1 Tilt and Cervical Axis (CA).

    RESULTS: The radiographs of 50 patients who had surgery done from November 2013 to November 2015 were analyzed. Mean age of this cohort was 16.3 ± 7.0 years. There were 38 (76%) female patients and 12 (24%) male patients. Mean final follow-up was 38.6 ± 5.8 months. When conformity assessment of the radiological parameter using the interclass coefficient correlation was done, we found that all parameters had significant correlation (P Shoulder Height (0.22) and Cla-A (0.13) had poor reliability.

    CONCLUSION: All the radiological shoulder and neck balance parameters studied were conformed and suitable to be used to assess the patient postoperatively. Amongst these radiological parameters, T1 tilt followed by CA recorded to be the most reliable parameters over time.

    LEVEL OF EVIDENCE: 4.

    Matched MeSH terms: Shoulder/physiology
Filters
Contact Us

Please provide feedback to Administrator (afdal@afpm.org.my)

External Links