MyMedR

Displaying publications 121 - 140 of 330 in total

Abstract:

Sort:

Fulltext Production of Biodegradable Palm Oil-Based Polyurethane as Potential Biomaterial for Biomedical Applications

Yeoh FH, Lee CS, Kang YB, Wong SF, Cheng SF, Ng WS

Polymers (Basel), 2020 Aug 17;12(8).
PMID: 32824514 DOI: 10.3390/polym12081842

Being biodegradable and biocompatible are crucial characteristics for biomaterial used for medical and biomedical applications. Vegetable oil-based polyols are known to contribute both the biodegradability and biocompatibility of polyurethanes; however, petrochemical-based polyols were often incorporated to improve the thermal and mechanical properties of polyurethane. In this work, palm oil-based polyester polyol (PPP) derived from epoxidized palm olein and glutaric acid was reacted with isophorone diisocyanate to produce an aliphatic polyurethane, without the incorporation of any commercial petrochemical-based polyol. The effects of water content and isocyanate index were investigated. The polyurethanes produced consisted of > 90% porosity with interconnected micropores and macropores (37-1700 µm) and PU 1.0 possessed tensile strength and compression stress of 111 kPa and 64 kPa. The polyurethanes with comparable thermal stability, yet susceptible to enzymatic degradation with 7-59% of mass loss after 4 weeks of treatment. The polyurethanes demonstrated superior water uptake (up to 450%) and did not induce significant changes in pH of the medium. The chemical changes of the polyurethanes after enzymatic degradation were evaluated by FTIR and TGA analyses. The polyurethanes showed cell viability of 53.43% and 80.37% after 1 and 10 day(s) of cytotoxicity test; and cell adhesion and proliferation in cell adhesion test. The polyurethanes produced demonstrated its potential as biomaterial for soft tissue engineering applications.

Matched MeSH terms: Biocompatible Materials
Fulltext Electrospun deferoxamine nanofiber for diabetic wound healing

Tracey Anastacia Jeckson, Sreenivas Patro Sisinthy, Neo Yun Ping

Malaysian Journal of Medicine and Health Sciences, 2019;15(102):46-46.
MyJurnal

Introduction: Diabetic foot ulcer (DFU) is the most distressing complication of diabetes mellitus and often associated with risk of non-traumatic lower extremity amputations. Available formulations and wound dressings for DFU treatment are unfortunately less effective both on controlling and healing DFU. Issues commonly found are associated with providing an optimum environment which facilitates healing process; moist environment, effective oxygen exchange, preventing infection, controlling exudate and also patients compliance. The challenge is therefore to develop a novel drug delivery which address this unmet medical need for better wound treatment of chronic and slow healing DFU. This study aimed to develop a biomaterial based nanofibrous wound dressing formulation containing deferoxamine (DFO), which reported as a potential therapeutic approach to improve wound healing. Deferoxamine regulates the expression and increase stability of hypoxia-inducible factor-1α (HIF-1 α), growthfactor that crucial in wound repair, and thus increase neovascularization. Preparation and characterization of chosen polymers; chitosan/ alginate/polyvinyl alcohol (PVA) for nanofiber formulation will be carried out. Such biodegradable polymer nanofiber is a great benefit for drug delivery owing to its high surface area to volume ratio and high porosity which creates ideal environment to aid in wound healing. Methods: Nanofibers loaded DFO will be fabricated by electrospinning
method that utilizes electrostatic force to produce fine fibers from the polymeric solution. Results: Various polymers concentrations and ratios are investigated to obtain the desired fibers characteristics. The selected optimized DFO nanofibers will be studied for its efficacy in wound healing through in-vivo animal studies. Conclusion: The proposed formulation would be an ideal low cost novel wound dressing with improved healing potential for efficient treatment
of diabetic foot ulcer.

Matched MeSH terms: Biocompatible Materials
Fulltext Explorative Xylitol Detection from Lignocellulosic Biomass Fermentation of Coconut Husk Using HPLC C18 Column

Mariam-Aisha Fatima, Muhammad Fahmi Mehdin, Nurain Nasrudin, Neelam Shahab

Journal of Management & Science, 2018;16(2):29-38.
MyJurnal

Lignocellulosic biomass, found in wooden plant husks is a potent renewable material source which can be utilised to form various chemicals and biomaterials including polyols such as xylitol. Xylitol has been used commercially as an alternative to sucrose in many products as bulk sweetener in non-cariogenic confectionery as well as in diabetic diets and solutions for parenteral nutrition. Therefore, this study aims to optimise separation parameters of the Shimadzu high performance liquid chromatography (HPLC) (Model No: LC-20A) and quantify the potential of coconut husk as substrate for Candida albicans in producing xylitol using HPLC. Pretreatment to depolymerise components of biomass i.e. cellulose, hemicellulose and lignin were done using dilute acid hydrolysis method which yielded fermentable reducing sugars, xylose. Xylose is a monosaccharide with an aldehyde functional group, a reducing sugar which is then utilised and fermented by the yeast Candida albicans to form xylitol. In this study, the media used for fermenting pretreated coconut husk and Candida albicans is a synthetic defined (SD) minimal broth. Growth curves against concentration of reducing sugar were plotted to determine utilisation and production trends with specific mixes of carbon sources. The presence of reducing sugars were tested using 3,5-dinitrosalicylic acid (DNS) assay in pretreated coconut husk yielded 13.22 g/L. In order to analyse the product with HPLC, an existing protocol is modified for Hypersil GOLD™ C18 column with acetonitrile as the mobile phase. Results obtained from HPLC analyses using developed protocol suggested the formation of xylitol from the fermentation of pretreated husk by Candida albicans. These can be followed by purification of fermented media in obtaining a better separation of contaminating peaks.

Matched MeSH terms: Biocompatible Materials
Scaffolds in bone tissue engineering

Nather A

Med J Malaysia, 2004 May;59 Suppl B:37-8.
PMID: 15468807
Matched MeSH terms: Biocompatible Materials*
γ-Fe2O3 nanoparticles filled polyvinyl alcohol as potential biomaterial for tissue engineering scaffold

Ngadiman NH, Idris A, Irfan M, Kurniawan D, Yusof NM, Nasiri R

J Mech Behav Biomed Mater, 2015 Sep;49:90-104.
PMID: 26002419 DOI: 10.1016/j.jmbbm.2015.04.029

Maghemite (γ-Fe2O3) nanoparticle with its unique magnetic properties is recently known to enhance the cell growth rate. In this study, γ-Fe2O3 is mixed into polyvinyl alcohol (PVA) matrix and then electrospun to form nanofibers. Design of experiments was used to determine the optimum parameter settings for the electrospinning process so as to produce elctrospun mats with the preferred characteristics such as good morphology, Young's modulus and porosity. The input factors of the electrospinnning process were nanoparticles content (1-5%), voltage (25-35 kV), and flow rate (1-3 ml/h) while the responses considered were Young's modulus and porosity. Empirical models for both responses as a function of the input factors were developed and the optimum input factors setting were determined, and found to be at 5% nanoparticle content, 35 kV voltage, and 1 ml/h volume flow rate. The characteristics and performance of the optimum PVA/γ-Fe2O3 nanofiber mats were compared with those of neat PVA nanofiber mats in terms of morphology, thermal properties, and hydrophilicity. The PVA/γ-Fe2O3 nanofiber mats exhibited higher fiber diameter and surface roughness yet similar thermal properties and hydrophilicity compared to neat PVA PVA/γ-Fe2O3 nanofiber mats. Biocompatibility test by exposing the nanofiber mats with human blood cells was performed. In terms of clotting time, the PVA/γ-Fe2O3 nanofibers exhibited similar behavior with neat PVA. The PVA/γ-Fe2O3 nanofibers also showed higher cells proliferation rate when MTT (3-(4,5-dimethylthiazol-2-yl)-2,5-diphenyltetrazolium bromide) assay was done using human skin fibroblast cells. Thus, the PVA/γ-Fe2O3 electrospun nanofibers can be a promising biomaterial for tissue engineering scaffolds.

Matched MeSH terms: Biocompatible Materials/pharmacology; Biocompatible Materials/chemistry*
Fulltext Preparation and properties of poly(vinyl alcohol)/chitosan blend bionanocomposites reinforced with cellulose nanocrystals/ZnO-Ag multifunctional nanosized filler

Azizi S, Ahmad MB, Hussein MZ, Ibrahim NA, Namvar F

Int J Nanomedicine, 2014;9:1909-17.
PMID: 24790433 DOI: 10.2147/IJN.S60274

A series of novel bionanocomposites were cast using different contents of zinc oxide-silver nanoparticles (ZnO-AgNPs) stabilized by cellulose nanocrystals (CNC) as multifunctional nanosized fillers in poly(vinyl alcohol)/chitosan (PVA/Cs) matrices. The morphological structure, mechanical properties, ultraviolet-visible absorption, and antimicrobial properties of the prepared films were investigated as a function of their CNC/ZnO-AgNP content and compared with PVA/chitosan/CNC bionanocomposite films. X-ray diffraction and field emission scanning electron microscopic analyses showed that the CNC/ZnO-AgNPs were homogeneously dispersed in the PVA/Cs matrix and the crystallinity increased with increasing nanosized filler content. Compared with pure PVA/Cs, the tensile strength and modulus in the films increased from 0.055 to 0.205 GPa and from 0.395 to 1.20 GPa, respectively. Ultraviolet and visible light can be efficiently absorbed by incorporating ZnO-AgNPs into a PVA/Cs matrix, suggesting that these bionanocomposite films show good visibility and ultraviolet-shielding effects. The bionanocomposite films had excellent antimicrobial properties, killing both Gram-negative Salmonella choleraesuis and Gram-positive Staphylococcus aureus. The enhanced physical properties achieved by incorporating CNC/ZnO-AgNPs could be beneficial in various applications.

Matched MeSH terms: Biocompatible Materials/administration & dosage; Biocompatible Materials/chemistry
Fulltext Stem cell therapies for myocardial infarction in clinical trials: bioengineering and biomaterial aspects

Higuchi A, Ku NJ, Tseng YC, Pan CH, Li HF, Kumar SS, et al.

Lab Invest, 2017 Oct;97(10):1167-1179.
PMID: 28869589 DOI: 10.1038/labinvest.2017.100

Cardiovascular disease remains the leading cause of death and disability in advanced countries. Stem cell transplantation has emerged as a promising therapeutic strategy for acute and chronic ischemic cardiomyopathy. The current status of stem cell therapies for patients with myocardial infarction is discussed from a bioengineering and biomaterial perspective in this review. We describe (a) the current status of clinical trials of human pluripotent stem cells (hPSCs) compared with clinical trials of human adult or fetal stem cells, (b) the gap between fundamental research and application of human stem cells, (c) the use of biomaterials in clinical and pre-clinical studies of stem cells, and finally (d) trends in bioengineering to promote stem cell therapies for patients with myocardial infarction. We explain why the number of clinical trials using hPSCs is so limited compared with clinical trials using human adult and fetal stem cells such as bone marrow-derived stem cells.

Matched MeSH terms: Biocompatible Materials
Green dentistry: the art and science of sustainable practice

Mulimani P

Br Dent J, 2017 Jun 23;222(12):954-961.
PMID: 28642517 DOI: 10.1038/sj.bdj.2017.546

Dentistry is highly energy and resource intensive with significant environmental impact. Factors inherent in the profession such as enormous electricity demands of electronic dental equipment, voluminous water requirements, environmental effects of biomaterials (before, during and after clinical use), the use of radiation and the generation of hazardous waste involving mercury, lead etc have contributed towards this. With rising temperatures across the world due to global warming, efforts are being made worldwide to mitigate the effects of environmental damage by resorting to sustainability concepts and green solutions in a myriad of ways. In such a scenario, a professional obligation and social responsibility of dentists makes it imperative to transform the practice of dentistry from a hazardous to a sustainable one, by adopting environmental-friendly measures or 'green dentistry'. The NHS in the UK has been proactive in implementing sustainability in healthcare by setting targets, developing guidance papers, initiating steering groups to develop measures and implementing actions through its Sustainable Development Unit (SDU). Such sustainable frameworks, specific to dentistry, are not yet available and even the scientific literature is devoid of studies in this field although anecdotal narratives abound. Hence this paper attempts to present a comprehensive evaluation of the existing healthcare sustainability principles, for their parallel application in the field of dentistry and lays out a blueprint for integrating the two main underlying principles of sustainability - resource use efficiency and eliminating or minimising pollution - in the day-to-day practice. The article also highlights the importance of social values, community care, engaging stakeholders, economic benefits, developing policy and providing leadership in converting the concept of green dentistry into a practised reality.

Matched MeSH terms: Biocompatible Materials
Fulltext Engineered silybin nanoparticles educe efficient control in experimental diabetes

Das S, Roy P, Pal R, Auddy RG, Chakraborti AS, Mukherjee A

PLoS One, 2014;9(7):e101818.
PMID: 24991800 DOI: 10.1371/journal.pone.0101818

Silybin, is one imminent therapeutic for drug induced hepatotoxicity, human prostate adenocarcinoma and other degenerative organ diseases. Recent evidences suggest that silybin influences gluconeogenesis pathways favorably and is beneficial in the treatment of type 1 and type 2 diabetes. The compound however is constrained due to solubility (0.4 mg/mL) and bioavailabilty limitations. Appropriate nanoparticle design for silybin in biocompatible polymers was thus proposed as a probable solution for therapeutic inadequacy. New surface engineered biopolymeric nanoparticles with high silybin encapsulation efficiency of 92.11% and zeta potential of +21 mV were designed. Both the pure compound and the nanoparticles were evaluated in vivo for the first time in experimental diabetic conditions. Animal health recovered substantially and the blood glucose levels came down to near normal values after 28 days treatment schedule with the engineered nanoparticles. Restoration from hyperglycemic damage condition was traced to serum insulin regeneration. Serum insulin recovered from the streptozotocin induced pancreatic damage levels of 0.17 ± 0.01 µg/lit to 0.57 ± 0.11 µg/lit after nanoparticle treatment. Significant reduction in glycated hemoglobin level, and restoration of liver glycogen content were some of the other interesting observations. Engineered silybin nanoparticle assisted recovery in diabetic conditions was reasoned due to improved silybin dissolution, passive transport in nanoscale, and restoration of antioxidant status.

Matched MeSH terms: Biocompatible Materials/administration & dosage*; Biocompatible Materials/pharmacokinetics
Fulltext Finite element modelling and simulation for lower limb of human bone: a review

Muhammad Hanif Ramlee

Malaysian Journal of Medicine and Health Sciences, 2020;16(3):262-271.
MyJurnal

Most orthopaedic cases that involved with bone fracture are normally treated with medical implants. To be noticed that some precautions in terms of biomechanical and biomaterial properties are necessary for a successful post-sur- gery process. The biomechanical evaluation of implants could be carried out using computing and engineering technologies. However, in the computer simulation, some assumptions are needed as the limitations on computer resources and data input. This review focuses on the current method of developing the finite element model for patients with specific values of material properties for lower limb part such as hip, knee and ankle joint. Previous literature was reviewed from which keywords and search engines were identified. In this review, inclusion and exclusion criteria were used to limit the literature search. We reviewed the state-of-the-art in this area and provide recommendations for future research. In conclusion, the previous published reports illustrated different methods to develop numerical models.

Matched MeSH terms: Biocompatible Materials
Preparation, characterization and properties of core-shell cobalt ferrite/polycaprolactone nanomagnetic biomaterials

Khoo KS, Nur Farhana Amari, Tan CY, Shahidan Radiman, Redzuwan Yahaya, Muhamad Samudi Yasir

Sains Malaysiana, 2013;42:167-173.

Combination of magnetic and biocompatible materials to form core-shell nanomaterials has been widely used in medical fields. These core-shell magnetic biomaterials have a great potential for magnetic fluid hyperthermia (MFH) treatment to remedy cancer. The aims of this study were to investigate the production of core-shell cobalt ferrite/polycaprolactone (CoFe2O4/PCL) nanomaterials with different ratios of cobalt ferrite to caprolactone, to study the effects of using polymer in reducing the agglomerations between particles and to determine the structure, morphology, thermal and magnetic properties of these core-shell nanomaterials. The core-shell nanomaterials were produced by in situ polymerization method. The formation of the CoFe2O4/PCL was investigated by means of Fourier transform infrared spectroscopy (FTIR), x-ray diffractometer (XRD) and transmission electron microscopy (TEM). Its thermal properties were determined by using thermogravimetric analyzer (TGA). The vibrating sample magnetometer (VSM) was used to reveal the magnetic properties. The results for the XRD and FTIR spectra demonstrated the formation of cobalt ferrite and polycaprolactone in core-shell nanomaterials. From the TEM results, it was seen that the core-shell CoFe2O4/PCL nanomaterials were best formed at a ratio of CoFe2O4 to monomer caprolactone mixtures of 1:4.

Matched MeSH terms: Biocompatible Materials
Fulltext Titanium and titanium based alloys as metallic biomaterials in medical applications – spine implant case study

Nur Azida Che Lah, Muhamad Hellmy Hussin

Pertanika Journal of Science & Technology, 2019;27(1):459-472.
MyJurnal

Titanium (Ti) and Ti-based alloys presence the most widely applied as advanced biomaterials
in biomedical implant applications. Moreover, these alloys are known to be the most
valuable metallic materials including spinal cord surgical treatment. It becomes an interest
due to its advantages compared to others, including its bio compatibility and corrosion
resistant. However, an issue arises when it comes for permanent implant application as
the alloy has a possible toxic effect produced from chemical reaction between body fluid
environments with alloys chemical compositions. It also relies on the performance of
neighbouring bone tissue to integrate with the implant surface. Abnormalities usually
happen when surrounding tissue shows poor responses and rejection of implants that would
leads to body inflammation. These cause an increase in foreign body reaction leading to
severe body tissue response and thus, loosening of the implant. Corrosion effects and
biocompatibility behaviour of implantation usage also become one of the reasons of
implant damage. Here, this paper reviews the importance of using Ti and Ti-based alloys
in biomedical implantation, especially in orthopaedic spinal cord injury. It also reviews the
basic aspects of corrosion effects that lead to implant mechanical damage, poor response
of body rejection and biocompatibility behaviour of implantation usage.

Matched MeSH terms: Biocompatible Materials
Recent advances in tissue engineering scaffolds based on polyurethane and modified polyurethane

Naureen B, Haseeb ASMA, Basirun WJ, Muhamad F

Mater Sci Eng C Mater Biol Appl, 2021 Jan;118:111228.
PMID: 33254956 DOI: 10.1016/j.msec.2020.111228

Organ repair, regeneration, and transplantation are constantly in demand due to various acute, chronic, congenital, and infectious diseases. Apart from traditional remedies, tissue engineering (TE) is among the most effective methods for the repair of damaged tissues via merging the cells, growth factors, and scaffolds. With regards to TE scaffold fabrication technology, polyurethane (PU), a high-performance medical grade synthetic polymer and bioactive material has gained significant attention. PU possesses exclusive biocompatibility, biodegradability, and modifiable chemical, mechanical and thermal properties, owing to its unique structure-properties relationship. During the past few decades, PU TE scaffold bioactive properties have been incorporated or enhanced with biodegradable, electroactive, surface-functionalised, ayurvedic products, ceramics, glass, growth factors, metals, and natural polymers, resulting in the formation of modified polyurethanes (MPUs). This review focuses on the recent advances of PU/MPU scaffolds, especially on the biomedical applications in soft and hard tissue engineering and regenerative medicine. The scientific issues with regards to the PU/MPU scaffolds, such as biodegradation, electroactivity, surface functionalisation, and incorporation of active moieties are also highlighted along with some suggestions for future work.

Matched MeSH terms: Biocompatible Materials/pharmacology
Mineral and physiochemical evaluation of cockle shell (Anadara granosa) and other selected molluscan shell as potential biomaterials

Bharatham H, Md Zuki Abu Bakar Zakaria, Perimal EK, Loqman Mohamad Yusof, Muhajir Hamid

Sains Malaysiana, 2014;43:1023-1029.

Molluscan shells are attracting research interest due to the diverse application properties possessed. As shells are very similar to bones, this study was conducted to analyze the mineral and physiochemical composition of Cockle (Anadara granosa) shell and three other types of molluscan shell, namely Strombus canarium, Oliva sayana and Terebra dislocata as potential biomaterial for bone tissue engineering applications. Approximately 200 g of shells from each species were processed and powdered for the purpose of this study. Carbon was analyzed using the carbon analyzer while minerals and heavy metals through ICP-MS. The phase purity and crystallographic structures of the powders were identified using X-Ray Diffractometer (XRD) while the chemical functionality was determined using the Fourier transform infrared (FTIR) spectrophotometer. The analysis showed that Cockle shells contained higher content of calcium and carbon including varying amount of other minor elements comparatively. However, all four types of shell powders were found to contain below detectable levels of toxic elements. Physiochemical analysis on phase purity and crystallographic structures showed similar characteristics of carbonate group present in all four shell types. A predominantly aragonite form of calcium carbonate was detected in both XRD diffractogram and FTIR spectra for all samples. Our findings demonstrated that different types of molluscan shells have almost similar mineral and physiochemical characteristics and a predominantly aragonite form of calcium carbonate that provides a strong basis for their use as a potential bone tissues engineering material.

Matched MeSH terms: Biocompatible Materials
Improved cellular response of chemically crosslinked collagen incorporated hydroxyethyl cellulose/poly(vinyl) alcohol nanofibers scaffold

Zulkifli FH, Jahir Hussain FS, Abdull Rasad MS, Mohd Yusoff M

J Biomater Appl, 2015 Feb;29(7):1014-27.
PMID: 25186524 DOI: 10.1177/0885328214549818

The aim of this research is to develop biocompatible nanofibrous mats using hydroxyethyl cellulose with improved cellular adhesion profiles and stability and use these fibrous mats as potential scaffold for skin tissue engineering. Glutaraldehyde was used to treat the scaffolds water insoluble as well as improve their biostability for possible use in biomedical applications. Electrospinning of hydroxyethyl cellulose (5 wt%) with poly(vinyl alcohol) (15 wt%) incorporated with and without collagen was blended at (1:1:1) and (1:1) ratios, respectively, and was evaluated for optimal criteria as tissue engineering scaffolds. The nanofibrous mats were crosslinked and characterized by scanning electron microscope, Fourier transform infrared spectroscopy, differential scanning calorimetry, and thermogravimetric analysis. Scanning electron microscope images showed that the mean diameters of blend nanofibers were gradually increased after chemically crosslinking with glutaraldehyde. Fourier transform infrared spectroscopy was carried out to understand chemical interactions in the presence of aldehyde groups. Thermal characterization results showed that the stability of hydroxyethyl cellulose/poly(vinyl alcohol) and hydroxyethyl cellulose/poly(vinyl alcohol)/collagen nanofibers was increased with glutaraldehyde treatment. Studies on cell-scaffolds interaction were carried out by culturing human fibroblast (hFOB) cells on the nanofibers by assessing the growth, proliferation, and morphologies of cells. The scanning electron microscope results show that better cell proliferation and attachment appeared on hydroxyethyl cellulose/poly(vinyl alcohol)/collagen substrates after 7 days of culturing, thus, promoting the potential of electrospun scaffolds as a promising candidate for tissue engineering applications.

Matched MeSH terms: Biocompatible Materials/chemistry
Characterization of collagen/chitosan films for skin regenerating scaffold

Ismarul IN, Ishak Y, Ismail Z, Mohd Shalihuddin WM

Med J Malaysia, 2004 May;59 Suppl B:57-8.
PMID: 15468817

Various proportions of chitosan/collagen films (70/30% to 95/05%) w/w were prepared and evaluated for its suitability as skin regenerating scaffold. Interactions between chitosan and collagen were studied using Fourier Transform Infrared spectroscopy (FTIR) and Differential Scanning Colorimetry (DSC). Scanning Electron Microscope (SEM) was used to investigate the morphology of the blend. Mechanical properties were evaluated using a Universal Testing Machine (UTM). The chitosan/collagen films were found to swell proportionally with time until it reaches equilibrium. FTIR spectroscopy indicated no chemical interaction between the components of the blends. DSC data indicated only one peak proving that these two materials are compatible at all proportions investigated. SEM micrographs also indicated good homogeneity between these two materials.

Matched MeSH terms: Biocompatible Materials/analysis*
Fulltext The use of collagen biomaterial in oral cancer: a systematic review

Muhammad Lutfi Mohamed Halim, Nora Azirah Mohd Zayi, Mohd Yusof Mohamad, Mohd Hafiz Arzmi

Malaysian Journal of Medicine and Health Sciences, 2019;15(108):33-33.
MyJurnal

Introduction: Oral cancer is the sixth most common malignancy in the world. It is a major concern in Southeast Asia primarily due to betel quid chewing, smoking, and alcohol consumption. In Malaysia, oral cancer related cases accounts for 1.55% of the cause of deaths. Despite recent advances in cancer diagnoses and therapies, the survival rate of oral cancer patients only reached 50% in the last few decades. Tissue engineering (TE) principles may pro-vide new technology platforms to study mechanisms of angiogenesis and tumour cell growth as well as potentially tumour cell spreading in cancer research. The use of biomaterial, appropriate cell source and proper signalling mol-ecules are vital components of TE. Collagen biomaterial are widely used scaffold or membrane in oral application. Nevertheless, no review has been performed on the its usage for the study of oral cancer. This study aimed to sys-tematically review the use of collagen scaffold in oral cancer application. Methods: Research articles were searched using Scopus, Pubmed and Web of Science (WOS) databases. The keywords were limited to “collagen membrane OR collagen scaffold” AND “oral cancer”. Results: Initial search yielded 61 papers (Scopus:37, Pubmed: 12, WOS: 12). Further scrutinization of the papers based on the inclusion criteria resulted total of 3 papers. Two of the papers used collagen membrane for regeneration of oral mucosal defect and increment of alveolar ridge height post-surgery. The remaining paper utilize collagen biomaterial as scaffold for the culture of adenoid cystic carcinoma (ACC) cells. All papers reported significant role of collagen biomaterial in terms of tissue formation, healing scaffold and cellular proliferation. Conclusion: Collagen utilization as biomaterial offers potential use for regeneration of oral related structures as well providing useful model for therapeutics anti-cancer research.

Matched MeSH terms: Biocompatible Materials
Cellular and Molecular Interaction of Human Dermal Fibroblasts with Bacterial Nanocellulose Composite Hydrogel for Tissue Regeneration

Xi Loh EY, Fauzi MB, Ng MH, Ng PY, Ng SF, Ariffin H, et al.

ACS Appl Mater Interfaces, 2018 Nov 21;10(46):39532-39543.
PMID: 30372014 DOI: 10.1021/acsami.8b16645

The evaluation of the interaction of cells with biomaterials is fundamental to establish the suitability of the biomaterial for a specific application. In this study, the properties of bacterial nanocellulose/acrylic acid (BNC/AA) hydrogels fabricated with varying BNC to AA ratios and electron-beam irradiation doses were determined. The manner these hydrogel properties influence the behavior of human dermal fibroblasts (HDFs) at the cellular and molecular levels was also investigated, relating it to its application both as a cell carrier and wound dressing material. Swelling, hardness, adhesive force (wet), porosity, and hydrophilicity (dry) of the hydrogels were dependent on the degree of cross-linking and the amount of AA incorporated in the hydrogels. However, water vapor transmission rate, pore size, hydrophilicity (semidry), and topography were similar between all formulations, leading to a similar cell attachment and proliferation profile. At the cellular level, the hydrogel demonstrated rapid cell adhesion, maintained HDFs viability and morphology, restricted cellular migration, and facilitated fast transfer of cells. At the molecular level, the hydrogel affected nine wound-healing genes (IL6, IL10, MMP2, CTSK, FGF7, GM-CSF, TGFB1, COX2, and F3). The findings indicate that the BNC/AA hydrogel is a potential biomaterial that can be employed as a wound-dressing material to incorporate HDFs for the acceleration of wound healing.

Matched MeSH terms: Biocompatible Materials
Preparation and characterization of a novel biocomposite based on duck feet gelatin as alternative to bovine gelatin

Abedinia A, Ariffin F, Huda N, Mohammadi Nafchi A

Int J Biol Macromol, 2018 Apr 01;109:855-862.
PMID: 29133087 DOI: 10.1016/j.ijbiomac.2017.11.051

Edible duck feet gelatin (DFG)-based biocomposites with different glycerol (GLY) contents (15%, 25%, and 35% of dried DFG) were prepared. Physicochemical, mechanical, barrier, and heat seal properties of DFG films were characterized and compared as an alternative to bovine gelatin film. Increasing glycerol from 15 to 35% decreased the TS and YM and EB and HS increased, in value of 42.54-7.27 and 1240-157.10MPa and 22.82-50.33% and 42.06-347.15N/m respectively. The water vapor permeability (WVP) and oxygen permeability (OP) of films were increased from 4.78 to 5.6×10-11gm-1Pa-1s-1 and from 3.97 to 33.99cm3mμ/m2 d kPa respectively. GAB model estimations showed monolayer water content of films increased with the increase of plasticizer content. Moisture sorption isotherm modelling exhibited a type II BET classification. Fourier transform infrared (FTIR) spectra showed shifted peak at approximately 1024cm-1, which was related to glycerol. The results show that the properties of DFG film are suitable for use as an alternative material to bovine gelatin film.

Matched MeSH terms: Biocompatible Materials/isolation & purification; Biocompatible Materials/chemistry*
Fulltext Role of organic and ceramic biomaterials on bone healing and regeneration: An experimental study with significant value in translational tissue engineering and regenerative medicine

Moshiri A, Tekyieh Maroof N, Mohammad Sharifi A

Iran J Basic Med Sci, 2020 Nov;23(11):1426-1438.
PMID: 33235700 DOI: 10.22038/ijbms.2020.46228.10707

Objectives: We investigated the role of various biomaterials on cell viability and in healing of an experimentally induced femoral bone hole model in rats.
Materials and Methods: Cell viability and cytotoxicity of gelatin (Gel; 50 µg/µl), chitosan (Chi; 20 µg/µl), hydroxyapatite (HA; 50 µg/µl), nanohydroxyapatite (nHA; 10 µg/µl), three-calcium phosphate (TCP; 50 µg/µl) and strontium carbonate (Sr; 10 µg/µl) were evaluated on hADSCs via MTT assay. In vivo femoral drill-bone hole model was produced in rats that were either left untreated or treated with autograft, Gel, Chi, HA, nHA, TCP and Sr, respectively. The animals were euthanized after 30 days. Their bone holes were evaluated by gross-pathology, histopathology, SEM and radiography. Also, their dry matter, bone ash and mineral density were measured.
Results: Both the Gel and Chi showed cytotoxicity, while nHA had no role on cytotoxicity and cell-viability. All the HA, TCP and Sr significantly improved cell viability when compared to controls (P<0.05). Both the Gel and Chi had no role on osteoconduction and osteoinduction. Compared to HA, nHA showed superior role in increasing new bone formation, mineral density and ash (P<0.05). In contrast to HA and nHA, both the TCP and Sr showed superior morphological, radiographical and biochemical properties on bone healing (P<0.05). TCP and Sr showed the most effective osteoconduction and osteoinduction, respectively. In the Sr group, the most mature type of osteons formed.
Conclusion: Various biomaterials have different in vivo efficacy during bone regeneration. TCP was found to be the best material for osteoconduction and Sr for osteoinduction.

Matched MeSH terms: Biocompatible Materials

Filters

Please provide feedback to Administrator (afdal@afpm.org.my)

External Links