MyMedR

Displaying publications 161 - 170 of 170 in total

Abstract:

Sort:

Fulltext Cigarette smoke extract profoundly suppresses TNFα-mediated proinflammatory gene expression through upregulation of ATF3 in human coronary artery endothelial cells

Teasdale JE, Hazell GG, Peachey AM, Sala-Newby GB, Hindmarch CC, McKay TR, et al.

Sci Rep, 2017 Jan 06;7:39945.
PMID: 28059114 DOI: 10.1038/srep39945

Endothelial dysfunction caused by the combined action of disturbed flow, inflammatory mediators and oxidants derived from cigarette smoke is known to promote coronary atherosclerosis and increase the likelihood of myocardial infarctions and strokes. Conversely, laminar flow protects against endothelial dysfunction, at least in the initial phases of atherogenesis. We studied the effects of TNFα and cigarette smoke extract on human coronary artery endothelial cells under oscillatory, normal laminar and elevated laminar shear stress for a period of 72 hours. We found, firstly, that laminar flow fails to overcome the inflammatory effects of TNFα under these conditions but that cigarette smoke induces an anti-oxidant response that appears to reduce endothelial inflammation. Elevated laminar flow, TNFα and cigarette smoke extract synergise to induce expression of the transcriptional regulator activating transcription factor 3 (ATF3), which we show by adenovirus driven overexpression, decreases inflammatory gene expression independently of activation of nuclear factor-κB. Our results illustrate the importance of studying endothelial dysfunction in vitro over prolonged periods. They also identify ATF3 as an important protective factor against endothelial dysfunction. Modulation of ATF3 expression may represent a novel approach to modulate proinflammatory gene expression and open new therapeutic avenues to treat proinflammatory diseases.

Matched MeSH terms: Stress, Mechanical
Fulltext Effect of postoperative corticosteroids on surgical outcome and aqueous autotaxin following combined cataract and microhook ab interno trabeculotomy

Honjo M, Yamagishi R, Igarashi N, Ku CY, Kurano M, Yatomi Y, et al.

Sci Rep, 2021 01 12;11(1):747.
PMID: 33436915 DOI: 10.1038/s41598-020-80736-w

To evaluate the effect of postoperative corticosteroids on surgical outcome and autotaxin (ATX) levels after microhook ab interno trabeculotomy combined with cataract surgery (μLOT-CS), prospective, consecutive non-randomized case series comparing outcomes of 30 eyes with primary open angle glaucoma was performed. The aqueous ATX, intraocular pressure (IOP) and glaucoma medications were monitored for 3 months postoperatively. An in-vivo mouse μLOT model was generated. In vitro, ATX and fibrotic changes induced by dexamethasone (Dex) treatment following scratch (S) in cultured human trabecular meshwork (hTM) cells were assessed by immunofluorescence, immunoenzymatic assay, and RT-qPCR. Postoperative ATX at 1 week and the number of antiglaucoma medications at 3 months were significantly lower in non-steroid group, and steroid use was the only variable significantly associated with postoperative medications at 3 months in multiregression analyses. In vitro, ATX activity was significantly upregulated in the Dex + S group, and αSMA was significantly upregulated in the Dex and Dex + S groups. Fibronectin and COL1A1 were significantly upregulated in the S group. μLOT-CS decreased IOP and medications in the overall cohort, and non-use of postoperative steroids resulted in a smaller number of postoperative medications. Limiting postoperative steroids in μLOT may minimize IOP elevation and postoperative fibrosis.

Matched MeSH terms: Stress, Mechanical
Fulltext Epidermal and fibroblast growth factors incorporated polyvinyl alcohol electrospun nanofibers as biological dressing scaffold

Asiri A, Saidin S, Sani MH, Al-Ashwal RH

Sci Rep, 2021 Mar 11;11(1):5634.
PMID: 33707606 DOI: 10.1038/s41598-021-85149-x

In this study, single, mix, multilayer Polyvinyl alcohol (PVA) electrospun nanofibers with epidermal growth factor (EGF) and fibroblast growth factor (FGF) were fabricated and characterized as a biological wound dressing scaffolds. The biological activities of the synthesized scaffolds have been verified by in vitro and in vivo studies. The chemical composition finding showed that the identified functional units within the produced nanofibers (O-H and N-H bonds) are attributed to both growth factors (GFs) in the PVA nanofiber membranes. Electrospun nanofibers' morphological features showed long protrusion and smooth morphology without beads and sprayed with an average range of 198-286 nm fiber diameter. The fiber diameters decrement and the improvement in wettability and surface roughness were recorded after GFs incorporated within the PVA Nanofibers, which indicated potential good adoption as biological dressing scaffolds due to the identified mechanical properties (Young's modulus) in between 18 and 20 MPa. The MTT assay indicated that the growth factor release from the PVA nanofibers has stimulated cell proliferation and promoted cell viability. In the cell attachment study, the GFs incorporated PVA nanofibers stimulated cell proliferation and adhered better than the PVA control sample and presented no cytotoxic effect. The in vivo studies showed that compared to the control and single PVA-GFs nanofiber, the mix and multilayer scaffolds gave a much more wound reduction at day 7 with better wound repair at day 14-21, which indicated to enhancing tissue regeneration, thus, could be a projected as a suitable burn wound dressing scaffold.

Matched MeSH terms: Stress, Mechanical
Fulltext Time and dose-dependent effects of Labisia pumila on the bone strength of postmenopausal osteoporosis rat model

Mohd Effendy N, Abdullah S, Yunoh MF, Shuid AN

BMC Complement Altern Med, 2015 Mar 12;15:58.
PMID: 25887391 DOI: 10.1186/s12906-015-0567-x

BACKGROUND: Post-menopausal osteoporosis has long been treated and prevented by estrogen replacement therapy (ERT). Despite its effectiveness, ERT is associated with serious adverse effects. Labisia pumila var. alata (LP) is a herb with potential as an alternative agent to ERT due to its phytoestrogenic, antioxidative and anti-inflammatory effects on bone. This study aimed to determine the effects of LP supplementation on bone biomechanical strength of postmenopausal osteoporosis rat model.

METHODS: Ninety-six female Sprague-Dawley rats aged 4 to 5 months old were randomly divided into six groups; six rats in the baseline group (BL) and eighteen rats in each group of; Sham- operated (Sham), ovariectomised control (OVXC) and ovariectomised with daily oral gavages of Premarin at 64.5 μg/kg (ERT), LP at 20 mg/kg (LP20) and LP at 100 mg/kg (LP100) respectively. These groups were subdivided into three, six and nine weeks of treatment periods. Rats in BL group were euthanized before the start of the study, while other rats were euthanized after completion of their treatments. Femora were dissected out for biomechanical strength analysis using Instron Universal Model 5848 Micro Tester.

RESULTS: OVXC group showed deterioration in the bone biomechanical strength with time. Both ERT and LP supplemented rats showed improvements in bone strength parameters such as maximum load, displacement, stiffness, stress, and Young Modulus. The most improved bone strength was seen in rats given LP at the dose of 100 mg/kg for nine weeks.

CONCLUSION: LP supplementation at 100 mg/kg was more effective than ERT in reversing ovariectomy-induced bone biomechanical changes.

Matched MeSH terms: Stress, Mechanical
The influence of experimental silane primers on dentin bond strength and morphology: a laboratory and finite element analysis study

Mustafa AA, Matinlinna JP, Saidin S, Kadir MR

J Prosthet Dent, 2014 Dec;112(6):1498-506.
PMID: 24993375 DOI: 10.1016/j.prosdent.2014.05.011

STATEMENT OF PROBLEM: The inconsistency of dentin bonding affects retention and microleakage.
PURPOSE: The purpose of this laboratory and finite element analysis study was to investigate the effects on the formation of a hybrid layer of an experimental silane coupling agent containing primer solutions composed of different percentages of hydroxyethyl methacrylate.
MATERIAL AND METHODS: A total of 125 sound human premolars were restored in vitro. Simple class I cavities were formed on each tooth, followed by the application of different compositions of experimental silane primers (0%, 5%, 25%, and 50% of hydroxyethyl methacrylate), bonding agents, and dental composite resins. Bond strength tests and scanning electron microscopy analyses were performed. The laboratory experimental results were validated with finite element analysis to determine the pattern of stress distribution. Simulations were conducted by placing the restorative composite resin in a premolar tooth by imitating simple class I cavities. The laboratory and finite element analysis data were significantly different from each other, as determined by 1-way ANOVA. A post hoc analysis was conducted on the bond strength data to further clarify the effects of silane primers.
RESULTS: The strongest bond of hybrid layer (16.96 MPa) was found in the primer with 25% hydroxyethyl methacrylate, suggesting a barely visible hybrid layer barrier. The control specimens without the application of the primer and the primer specimens with no hydroxyethyl methacrylate exhibited the lowest strength values (8.30 MPa and 11.78 MPa) with intermittent and low visibility of the hybrid layer. These results were supported by finite element analysis that suggested an evenly distributed stress on the model with 25% hydroxyethyl methacrylate.
CONCLUSIONS: Different compositions of experimental silane primers affected the formation of the hybrid layer and its resulting bond strength.

Matched MeSH terms: Stress, Mechanical
The impact of surface preparation on shear bond strength of metallic orthodontic brackets bonded with a resin-modified glass ionomer cement

Elnafar AA, Alam MK, Hasan R

J Orthod, 2014 Sep;41(3):201-7.
PMID: 25143559 DOI: 10.1179/1465313314Y.0000000097

The aim of this study was to assess the effects of four enamel preparation techniques on shear bond strength (SBS) of brackets bonded with a resin-modified glass ionomer cement (RMGIC). Adhesive Remnant Index (ARI) and enamel surface roughness (Ra) were also investigated after cement removal.

Matched MeSH terms: Stress, Mechanical
An ex vivo culture model for orthodontically induced root resorption

Wan Hassan WN, Stephenson PA, Waddington RJ, Sloan AJ

J Dent, 2012 May;40(5):406-15.
PMID: 22342686 DOI: 10.1016/j.jdent.2012.02.002

Root resorption is a ubiquitous although undesirable sequela to orthodontic treatment. Current methods to investigate the pathophysiology have certain limitations. In pursuit to understand and develop treatment modalities for orthodontically induced root resorption, the ability to manipulate cells within their natural extracellular matrix in a three dimensional organotypic model is invaluable. The study aimed to develop a laboratory-based organotypic model to investigate the effect of orthodontic forces on the periodontium.

Matched MeSH terms: Stress, Mechanical
Vitamin E exhibits bone anabolic actions in normal male rats

Shuid AN, Mehat Z, Mohamed N, Muhammad N, Soelaiman IN

J. Bone Miner. Metab., 2010 Mar;28(2):149-56.
PMID: 19779668 DOI: 10.1007/s00774-009-0122-2

Recently, vitamin E has been found to promote the bone structure of nicotine-treated rats well above their baseline values, thus suggesting that vitamin E may have some anabolic action. A bone anabolic agent acts by improving the bone structure leading to stronger bone. To assess the possible anabolic action vitamin E on bone, we supplemented alpha-tocopherol (ATF) or gamma-tocotrienol (GTT) at 60 mg/kg or vehicle [normal control (NC) group] for 4 months to normal male rats and measured their bone structure and biomechanical properties. Histomorphometric analysis revealed that vitamin E-supplemented rats have better trabecular volume, thickness, number, and separation than rats receiving vehicle only. For the first time we reported that GTT improves all the parameters of bone biomechanical strength, while ATF only improved some of the parameters compared to the NC group. Vitamin E supplementation, especially with the gamma isomer, improves bone structure, which contributed to stronger bone. Therefore, vitamin E has the potential to be used as an anabolic agent to treat osteoporosis or as bone supplements for young adults to prevent osteoporosis in later years.

Matched MeSH terms: Stress, Mechanical
The effect of filler content and processing variables on dimensional accuracy of experimental composite inlay material

Razak AA, Harrison A

J Prosthet Dent, 1997 Apr;77(4):353-8.
PMID: 9104710

Dimensional accuracy of a composite inlay restoration is important to ensure an accurate fit and to minimize cementation stresses.

Matched MeSH terms: Stress, Mechanical
Fulltext Antimicrobial quaternary ammonium organosilane cross-linked nanofibrous collagen scaffolds for tissue engineering

Dhand C, Balakrishnan Y, Ong ST, Dwivedi N, Venugopal JR, Harini S, et al.

Int J Nanomedicine, 2018;13:4473-4492.
PMID: 30122921 DOI: 10.2147/IJN.S159770

Introduction: In search for cross-linkers with multifunctional characteristics, the present work investigated the utility of quaternary ammonium organosilane (QOS) as a potential cross-linker for electrospun collagen nanofibers. We hypothesized that the quaternary ammonium ions improve the electrospinnability by reducing the surface tension and confer antimicrobial properties, while the formation of siloxane after alkaline hydrolysis could cross-link collagen and stimulate cell proliferation.
Materials and methods: QOS collagen nanofibers were electrospun by incorporating various concentrations of QOS (0.1%-10% w/w) and were cross-linked in situ after exposure to ammonium carbonate. The QOS cross-linked scaffolds were characterized and their biological properties were evaluated in terms of their biocompatibility, cellular adhesion and metabolic activity for primary human dermal fibroblasts and human fetal osteoblasts.
Results and discussion: The study revealed that 1) QOS cross-linking increased the flexibility of otherwise rigid collagen nanofibers and improved the thermal stability; 2) QOS cross-linked mats displayed potent antibacterial activity and 3) the biocompatibility of the composite mats depended on the amount of QOS present in dope solution - at low QOS concentrations (0.1% w/w), the mats promoted mammalian cell proliferation and growth, whereas at higher QOS concentrations, cytotoxic effect was observed.
Conclusion: This study demonstrates that QOS cross-linked mats possess anti-infective properties and confer niches for cellular growth and proliferation, thus offering a useful approach, which is important for hard and soft tissue engineering and regenerative medicine.

Matched MeSH terms: Stress, Mechanical