A cross-sectional study was carried out to determine the prevalence of hypertension in the Chinese elderly and to examine its relationship with various behavioural and nutritional risk factors. This study involved 243 Chinese aged 55 years and older in 2 randomly selected Chinese Villages in Seberang Prai Tengah, Penang. The study included an interview, anthropometric assessment and blood pressure measurement. The prevalence of hypertension was 48.1% and out of this, 65 (55.6%) were on anti-hypertensive treatment. There was a significant rise in the prevalence with age. Hypertension was found to be inversely related to per capita income and physical activity (p < 0.05). Hypertension was significantly more common in smokers than non-smokers. Alcohol intake in the elderly was low and not related to hypertension. Obesity was significantly associated with hypertension only among the elderly aged 55-64 years. The dietary intake of sodium, potassium and calcium did not differ significantly between the hypertensive and normotensive elderly.
This article presents three datasets related to the laboratory scale 3-axis filament winding machine. The winding experimental tests are described on the range of winding angle, winding accuracy of programmed G-codes, and linear and rotation speeds in raw data. The real-time winding angle measurement system is developed to monitor and measure the winding angle of filament-wound carbon-fiber reinforced plastics (CFRP) tubes. Two winding patterns are provided as dry and wet winding processes. Moreover, an experimental test of a real-time winding angle measurement system is captured and analyzed. The i-winder app controls the winding machine through a Bluetooth module, which is programmed by MIT App Inventor. The data presented in this article can have a benchmark for developing a multi-axis filament winding machine. It is provided an inexpensive and open-source control system and is embedded in a real-time winding angle measurement system. The experimental assessment data can be found in this article [1]. The data is available in the cloud-based Mendeley Data repository [2].
Coronary heart disease (CHD) is the leading cause of death in Malaysia, despite its status as a developing country. The rural population is thought to be at low risk.
Infected aneurysm is a life threatening clinical condition that is associated with significant morbidity and mortality. Early detection is essential for a rapid and efficacious initial treatment for better prognosis. Since the introduction of antibiotic therapy and concomitant decline of endocarditis, true mycotic aneurysms are rarely seen. The usual treatment consists of antibiotics along with aggressive surgical debridement of the infected tissue and vascular reconstruction, if needed. We here describe an infected aneurysm presenting as pyrexia of unknown origin and discuss the clinical features and challenges encountered in the treatment.
Phytoremediation is an environment-friendly and cost-effective method to clean the environment of heavy metal contamination. A prolonged phytotoxicity test was conducted in a single exposure. Scirpus grossus plants were grown in sand to which the diluted Pb (NO3)2 was added, with the variation of concentration were 0, 100, 200, 400, 600, and 800 mg/L. It was found that Scirpus grossus plants can tolerate Pb at concentrations of up to 400 mg/L. The withering was observed on day-7 for Pb concentrations of 400 mg/L and above. 100% of the plants withered with a Pb concentration of 600 mg/L on day 65. The Pb concentration in water medium decreased while in plant tissues increased. Adsorption of Pb solution ranged between 2 to 6% for concentrations of 100 to 800 mg/L. The Bioaccumulation Coefficient and Translocation Factor of Scirpus grossus were found greater than 1, indicating that this species is a hyperaccumulator plant.
This article describes the development of a partially degradable metal bone pin, proposed to minimize the occurrence of bone refracture by avoiding the creation of holes in the bone after pin removal procedure. The pin was made by friction welding and composed of two parts: the degradable part that remains in the bone and the nondegradable part that will be removed as usual. Rods of stainless steel 316L (nondegradable) and pure iron (degradable) were friction welded at the optimum parameters: forging pressure = 33.2 kPa, friction time = 25 s, burn-off length = 15 mm, and heat input = 4.58 J/s. The optimum tensile strength and elongation was registered at 666 MPa and 13%, respectively. A spiral defect formation was identified as the cause for the ductile fracture of the weld joint. A 40-µm wide intermetallic zone was identified along the fusion line having a distinct composition of Cr, Ni, and Mo. The corrosion rate of the pin gradually decreased from the undeformed zone of pure iron to the undeformed zone of stainless steel 316L. All metallurgical zones of the pin showed no toxic effect toward normal human osteoblast cells, confirming the ppb level of released Cr and Ni detected in the cell media were tolerable.
GRA4 of Toxoplasma gondii has been shown to prompt IgG, IgM and IgA responses in previous studies and is thus considered one of the major immunogenic proteins from T. gondii that can be used for both diagnostics purposes and vaccine development. This study seeks to clone and express the GRA4 in Pichia pastoris, which has numerous advantages over other systems for expression of eukaryotic proteins. In order to achieve this, the gene was cloned into the pPICZα A expression vector, which was then incorporated into the P. pastoris genome via insertional integration for expression of the recombinant protein, under the AOX1 promoter. The antigen was expressed along with the prepro sequence of the α-factor of yeast so that it could be excreted out of the P. pastoris cells and obtained from the medium. Upon SDS-PAGE analysis it was found that the recombinant protein was expressed optimally as a 40 kDa protein after 96 hours of induction with 0.75% of methanol. The expressed GRA4 protein showed discrepancy in size with the calculated molecular mass. This may be attributed to the various posttranslational modifications including glycosylation and phosphorylation. Despite the difference in molecular weight, the recombinant protein was able to detect toxoplasmosis in Western blot format. The recombinant GRA4 was expressed with an intact polyhistidine-tag, which could be used for future purification of the antigen.
6239 children aged 7 to 16 years, attending 22 primary and secondary schools in Kuala Lumpur, Malaysia, were screened using a self report questionnaire, with their heights and weights measured using a digital electronic SECA beam balance. The selection was done by a two staged stratified random sampling from a total of 226 schools in Kuala Lumpur. The racial distribution was 56.7% Malays, 33.8% Chinese and 8.1% Indians; 3.6% (n:222) of the children were identified as obese and 6% (n:373) identified as overweight. The definitions of obese and overweight were computed using growth charts of the National Centre for Health Statistics (NCHS) from the median of the reference population. There were no significant differences amongst the 3 major ethnic groups in the obese group. The differences were significant in the overweight group with the Indians most overweight, followed by the Chinese and the Malays.
The morphology and 12 shell morphometric features proportionate to shell length were analysed between local hard clam; Meretrix lyrata, M. meretrix and M. lusoria from Sarawak, Malaysia. Meretrix spp. was observed to comprise a unique feature of a pallial sinus scar for each species. Analysis of variance revealed significant differences among Meretrix spp. using proportion ratios of SL for SW; LL; AL; LCT; AW; PW and PS (p<0.05). Cluster analysis among morphometric features of M. lyrata, M. meretrix and M. lusoria were discriminated at 98.5% similarities and supported by the principal component analysis. The present study suggests that pallial sinus scar shape, together with interior and exterior morphometric features, were suitable as identification keys for Meretrix spp. Hence, the present study emphasizes on the application of interior, rather than exterior morphology and morphometric features in hard clam identification before further investigation can be performed through genetic identification means.
Greenhouse experiments were carried out to determine the phytotoxic effects on the plant Ludwigia octovalvis in order to assess its applicability for phytoremediation gasoline-contaminated soils. Using plants to degrade hydrocarbons is a challenging task. In this study, different spiked concentrations of hydrocarbons in soil (1, 2, and 3 g/kg) were tested. The results showed that the mean efficiency of total petroleum hydrocarbon (TPH) removal over a 72-day culture period was rather high. The maximum removal of 79.8 % occurred for the 2 g/kg concentration, while the removal rate by the corresponding unplanted controls was only (48.6 %). The impact of gasoline on plants included visual symptoms of stress, yellowing, growth reduction, and perturbations in the developmental parameters. The dry weight and wet weight of the plant slightly increased upon exposure to gasoline until day 42. Scanning electron microscopy (SEM) indicated change to the root and stem structure in plant tissue due to the direct attachment with gasoline contaminated compared to the control sample. The population of living microorganisms in the contaminated soil was found to be able to adapt to different gasoline concentrations. The results showed that L. octovalvis and rhizobacteria in gasoline-contaminated soil have the potential to degrade organic pollutants.
Bauxite and iron ore mining is the major contributor to metal pollution in Tasik Chini, Malaysia. Deforestation of the protected zone of reserve forest exacerbates the problem. The current study is to understand the speciation of metals spatially in sediment to analyse the risk associated in terms of its mobility and bioavailability. The samples of sediment are collected from Sungai Jemberau, Laut Jemberau, and Laut Gumum of Tasik Chini. Four samplings were conducted for a year, by collecting the surface sediment. Sequential extraction method was followed for speciation of sediment and classified it into exchangeable, reducible, Fe-Mn oxides, organic and residual fractions. The results were also analyzed using principal component analysis (PCA) and cluster analysis (CA). The result reveals that Fe, Al, Mn, Zn, and Pb are the primary constituents of sediment contributing to about 98% of residual fraction. Co, Cd, Cr, As, and Ni are found in trace metal concentration and are identified to be mainly released from anthropogenic sources nearby. Although the individual proportion is less than major metals in exchangeable and carbonate fraction, they possess geochemically significant concentration above the permissible limit. More than 70-80% of all its total concentration proportion is hence found in mobile and bioavailable state. These possess toxic and have chronic effects to aquatic life and public health even in trace elemental concentration. Hence, these metals are the most toxic and bioavailable metals pausing risk for aquatic and public health. PCA analysis highlights that the enrichment of heavy metals in bioavailable fraction is mostly contributed from anthropogenic sources. The same results are emphasized by cluster analysis.
Anodised titanium has a long history as a coating structure for implants due to its bioactive and ossified surface, which promotes rapid bone integration. In response to the growing literature on anodised titanium, this article is the first to revisit the evolution of anodised titanium as an implant coating. The review reports the process and mechanisms for the engineering of distinctive anodised titanium structures, the significant factors influencing the mechanisms of its formation, bioactivity, as well as recent pre- and post-surface treatments proposed to improve the performance of anodised titanium. The review then broadens the discussion to include future functional trends of anodised titanium, ranging from the provision of higher surface energy interactions in the design of biocomposite coatings (template stencil interface for mechanical interlock) to techniques for measuring the bone-to-implant contact (BIC), each with their own challenges. Overall, this paper provides up-to-date information on the impacts of the structure and function of anodised titanium as an implant coating in vitro and in/ex vivo tests, as well as the four key future challenges that are important for its clinical translations, namely (i) techniques to enhance the mechanical stability and (ii) testing techniques to measure the mechanical stability of anodised titanium, (iii) real-time/in-situ detection methods for surface reactions, and (iv) cost-effectiveness for anodised titanium and its safety as a bone implant coating.
One of the appropriate development technology options for the treatment of wastewater contaminated with diesel is constructed wetlands (CWs). Throughout 72 days of exposure, sampling was carried out for monitoring of physical parameters, plant growth and the efficiency of total petroleum hydrocarbon (TPH) removal, as an indication for diesel contamination, to assess the pilot-scale performance. Four pilot CWs with a horizontal sub-surface flow system were applied using the bulrush of Scirpus grossus. The CWs were loaded with different diesel concentrations of 0, 0.1, 0.2 and 0.25% (Vdiesel/Vwater). The TPH removal efficiencies were 82, 71, and 67% at the end of 72 days for diesel concentrations of 0.1, 0.2, and 0.25% respectively. In addition, the high removal efficiency of total suspended solids and chemical oxygen demand (COD) were 100 and 75.4% respectively, for a diesel concentration of 0.1%. It was concluded that S. grossus is a potential plant that can be used in a well-operated CW for restoring 0.1% diesel-contaminated water.
Phytoremediation is a technology to clean the environment from heavy metals contamination. The objectives of this study are to threat Pb contaminated wastewater by using phytoremediation technology and to determine if the plant can be mention as hyperaccumulator. Fifty plants of Scirpus grossus were grown in sand medium and 600 L spiked water in various Pb concentration (10, 30 and 50 mg/L) was exposed. The experiment was conducted with single exposure method, sampling time on day-1, day-14, day-28, day-42, day-70, and day-98. The analysis of Pb concentration in water, sand medium and inside the plant tissue was conducted by ICP-OES. Water samples were filtered and Pb concentration were directly analyzed, Pb in sand samples were extracted by EDTA method before analyzed, and Pb in plant tissues were extracted by wet digestion method and analyzed. The results showed that on day-28, Pb concentration in water decreased 100%, 99.9%, 99.7%, and the highest Pb uptake by plant were 1343, 4909, 3236 mg/kg for the treatment of 10, 30, and 50 mg/L respectively. The highest BC and TF were 485,261 on day-42 and 2.5295 on day-70 of treatment 30 mg/L, it can be mentioned that Scirpus grossus is a hyperaccumulator.
In this study, bulrush (Scirpus grossus) was subjected to a 72 day phytotoxicity test to assess its ability to phytoremediate diesel contamination in simulated wastewater at different concentrations (0, 8700, 17,400 and 26,100mg/L). Diesel degradation by S. grossus was measured in terms of total petroleum hydrocarbon (TPH-D). The TPH-D concentration in the synthetic wastewater was determined with the liquid-liquid extraction method and gas chromatography. S. grossus was found to reduce TPH-D by 70.0 and 80.2% for concentrations of 8700 mg/L and 17,400mg/L, respectively. At a diesel concentration of 26,100mg/L, S. grossus died after 14 days. Additionally, the biomass of S. grossus plants was found to increase throughout the phytotoxicity test, confirming the ability of the plant to survive in water contaminated with diesel at rates of less than 17,400mg/L.
Systemic Lupus Erythematosus (SLE) is a disease with multiorgan involvement and multiple autoantibody production including antineutrophil cytoplasmic antibodies (ANCA). Despite its reported prevalence in more than one third of SLE patients, the role of ANCA in the pathogenesis or otherwise in SLE remains unresolved. 131 SLE patients had been previously studied for various serologic parameters of disease activity. Their cumulative organ involvement in the course of their disease had also been determined and the Lupus Activity Index (LAI) calculated. Their stored sera were then screened for the presence of ANCA by two methods viz Indirect immunofluorescence (IIF) and also enzyme-linked immunosorbent assay (ELISA). ANCA was present in 24.8% of these SLE patients. The atypical ANCA pattern was predominant and accounted for an overall of 20.6%. Anti-MPO and anti-PR3 were detected in 1.5% of patients respectively. No association was found between ANCA positivity and disease activity. There was also no association of ANCA with specific organ involvement. Despite the high prevalence of ANCA especially the atypical variant in SLE, they probably represent only one of the wide repertoire of autoantibodies found in this disease. Routine testing for ANCA in lupus patients is therefore not recommended.
The greenhouse phytotoxicity experiment was conducted to analyse and assess the capability of Scirpus mucronatus (L.) in tolerating and removing petrol in contaminated soil. This research was conducted for 72 days by using 5, 10 and 30 g/kg petrol as soil contaminants. Results showed that the system planted with S. mucronatus (L.) had high potential to treat the 10 g/kg petrol-contaminated soil and had an average Total Petroleum Hydrocarbon (TPH) removal of 82.1%. At 5 and 30 g/kg petrol, the planted system removed 74.9% and 75.8% TPH, respectively. The petrol (10 g/kg) affected the plant growth positively, which was indicated by the increase in dry and wet weights throughout the research period. The removal of the TPH in the system was performed because of the interaction of plants and rhizobacteria. SEM showed that a high concentration of petrol (30 g/kg) affected the plant tissue negatively, as indicated by the altered structures of the root and stem cells. EDX results also confirmed that petrol was absorbed by the plant, as shown by the increased carbon content in the plant's root and stem after the treatment.
Gelatin is a very popular pharmaceutical and food ingredient and the most studied ingredient in Halal researches. Interest in source gelatin authentication is based on religious and cultural beliefs, food fraud prevention and health issues. Seven gelatin authentication methods that have been developed include: nucleic acid based, immunochemical, electrophoretic analysis, spectroscopic, mass-spectrometric, chromatographic-chemometric and chemisorption methods. These methods are time consuming, and require capital intensive equipment with huge running cost. Reliability of gelatin authentication methods is challenged mostly by transformation of gelatin during processing and close similarities among gelatin structures. This review concisely presents findings and challenges in this research area and suggests needs for more researches on development of rapid authentication method and process-transformed gelatins.