Displaying publications 1 - 20 of 30 in total

Abstract:
Sort:
  1. Tan TL, Lee LY, Lim WC
    Med J Malaysia, 2018 12;73(6):427-429.
    PMID: 30647223
    The occurrence of Leptospirosis and Escherichia coli coinfection in the post-partum period is a novel case. This report illustrated a previously well woman from a suburban area presented with acute neurological deterioration following a two days history of fever during her puerperal period. Early interventions with fluids, broad spectrum antibiotics and intensive supportive care were given. Despite that, she deteriorated rapidly and developed pulmonary hemorrhage, disseminated intravascular coagulopathy, and multi-organ failure. She succumbed within 12 hours of admission. The knowledge about such fatal co-infections should be disseminated to medical practitioners encountering Leptospirosis infection and general public.
  2. Lee LY, Khoo MB, Teh SY, Lee MH
    PLoS One, 2015;10(5):e0126331.
    PMID: 25951141 DOI: 10.1371/journal.pone.0126331
    The usual practice of using a control chart to monitor a process is to take samples from the process with fixed sampling interval (FSI). In this paper, a synthetic X control chart with the variable sampling interval (VSI) feature is proposed for monitoring changes in the process mean. The VSI synthetic X chart integrates the VSI X chart and the VSI conforming run length (CRL) chart. The proposed VSI synthetic X chart is evaluated using the average time to signal (ATS) criterion. The optimal charting parameters of the proposed chart are obtained by minimizing the out-of-control ATS for a desired shift. Comparisons between the VSI synthetic X chart and the existing X, synthetic X, VSI X and EWMA X charts, in terms of ATS, are made. The ATS results show that the VSI synthetic X chart outperforms the other X type charts for detecting moderate and large shifts. An illustrative example is also presented to explain the application of the VSI synthetic X chart.
  3. Lee LY, Morad N, Ismail N, Talebi A, Rafatullah M
    Int J Mol Sci, 2020 Sep 18;21(18).
    PMID: 32962106 DOI: 10.3390/ijms21186860
    This study investigates the separation of two heavy metals, Cd(II) and Cu(II), from the mixed synthetic feed using a liquid-liquid extraction. The current study uses tri-octyl methylammonium chloride (Aliquat 336) as the extractant (with tributyl phosphate (TBP) as a phase modifier), diluted in toluene, in order to investigate the selective extraction of Cd(II) over Cu(II) ions. We investigate the use of ethylenediaminetetraacetic acid (EDTA) as a masking agent for Cu(II), when added in aqueous feed, for the selective extraction of Cd(II). Five factors that influence the selective extraction of Cd(II) over Cu(II) (the equilibrium pH (pHeq), Aliquat 336 concentration (Aliquat 336), TBP concentration (TBP), EDTA concentration (EDTA), and organic to aqueous ratio (O:A)) were analyzed. Results from a 25-1 fractional factorial design show that Aliquat 336 significantly influenced Cd(II) extraction, whereas EDTA was statistically significant for the antagonistic effect on the E% of Cu(II) in the same system. Moreover, results from optimization experiment showed that the optimum conditions are Aliquat 336 concentration of 99.64 mM and EDTA concentration of 48.86 mM-where 95.89% of Cd(II) was extracted with the least extracted Cu(II) of 0.59%. A second-order model was fitted for optimization of Cd(II) extraction with a R2 value of 0.998, and ANOVA results revealed that the model adequately fitted the data at a 5% significance level. Interaction between Aliquat 336 and Cd(II) has been proven via FTIR qualitative analysis, whereas the addition of TBP does not affect the extraction mechanism.
  4. Katiyar SA, Lee LY, Iida F, Nurzaman SG
    Soft Robot, 2023 Apr;10(2):365-379.
    PMID: 36301203 DOI: 10.1089/soro.2021.0138
    Robots primarily made of soft and elastic materials have potential applications such as traveling in confined spaces due to their adaptive morphology. However, their energy efficiency is still subject to improvement. Although a possible approach to increase efficiency is by harvesting the energy used during their behavioral motion, it is not trivial to do so due to their complex dynamics. This work seeks to pioneer a study that exploits the tight coupling between a robot's adaptive morphology, control, and consequent behaviors to harvest energy and increase energy efficiency. It is hypothesized that since varying the robot's morphology may change the energy use that leads to contrasting behavior and efficiency, harvesting the robot's energy will need to be adapted to its morphology. To verify the hypothesis, we developed a shape-changing robot with an elastic structure that achieves locomotion via vibration controlled by a single motor, such that the complex dynamics of the robot can be characterized through its resonance frequencies. It will be shown that harvesting energy at opportune occasions is more important than maximizing the harvest capacity to increase energy efficiency. We will also show how the robot's shape affects energy use in locomotion and how energy harvesting will feedback additional energy that increases the magnitude and affects the robot's behavior. We conclude with an understanding of the role of the robot's morphology, that is, shape, in using the energy provided to the robot and how the understanding can be used to harvest the robot's energy to increase its efficiency.
  5. Lee XJ, Lee LY, Foo LP, Tan KW, Hassell DG
    J Environ Sci (China), 2012;24(9):1559-68.
    PMID: 23520862
    The present work covers the preparation of carbon-based nanosorbents by ethylene decomposition on stainless steel mesh without the use of external catalyst for the treatment of water containing nickel ions (Ni2+). The reaction temperature was varied from 650 to 850 degrees C, while reaction time and ethylene to nitrogen flow ratio were maintained at 30 min and 1:1 cm3/min, respectively. Results show that nanosorbents synthesised at a reaction temperature of 650 degrees C had the smallest average diameter (75 nm), largest BET surface area (68.95 m2/g) and least amount of impurity (0.98 wt.% Fe). A series of batch-sorption tests were performed to evaluate the effects of initial pH, initial metal concentration and contact time on Ni2+ removal by the nanosorbents. The equilibrium data fitted well to Freundlich isotherm. The kinetic data were best correlated to a pseudo second-order model indicating that the process was of chemisorption type. Further analysis by the Boyd kinetic model revealed that boundary layer diffusion was the controlling step. This primary study suggests that the prepared material with Freundlich constants compared well with those in the literature, is a promising sorbent for the sequestration of Ni2+ in aqueous solutions.
  6. Lam YF, Lee LY, Chua SJ, Lim SS, Gan S
    Ecotoxicol Environ Saf, 2016 May;127:61-70.
    PMID: 26802563 DOI: 10.1016/j.ecoenv.2016.01.003
    Lansium domesticum peel (LDP), a waste material generated from the fruit consumption, was evaluated as a biosorbent for nickel removal from aqueous media. The effects of dosage, contact time, initial pH, initial concentration and temperature on the biosorption process were investigated in batch experiments. Equilibrium data were fitted by the Langmuir, Freundlich, Temkin and Dubinin-Radushkevich models using nonlinear regression method with the best-fit model evaluated based on coefficient of determination (R(2)) and Chi-square (χ(2)). The best-fit isotherm was found to be the Langmuir model exhibiting R(2) very close to unity (0.997-0.999), smallest χ(2) (0.0138-0.0562) and largest biosorption capacity (10.1mg/g) at 30°C. Kinetic studies showed that the initial nickel removal was rapid with the equilibrium state established within 30min. Pseudo-second-order model was the best-fit kinetic model indicating the chemisorption nature of the biosorption process. Further data analysis by the intraparticle diffusion model revealed the involvement of several rate-controlling steps such as boundary layer and intraparticle diffusion. Thermodynamically, the process was exothermic, spontaneous and feasible. Regeneration studies indicated that LDP biosorbent could be regenerated using hydrochloric acid solution with up to 85% efficiency. The present investigation proved that LDP having no economic value can be used as an alternative eco-friendly biosorbent for remediation of nickel contaminated water.
  7. Sthaneshwar P, Lai LC, Raja Azzidin RE, Mohd Hussain B, Anas SS, Supremaniam S, et al.
    Malays J Pathol, 2021 Apr;43(1):41-48.
    PMID: 33903304
    INTRODUCTION: The Malaysian Association of Clinical Biochemists (MACB) established a Task Force for Chronic Kidney Disease. A survey was undertaken by the Task Force on the reporting of estimated glomerular filtration rate (eGFR) and urine albumin by hospital laboratories in Malaysia in both the government and private sectors.

    MATERIALS AND METHODS: An e-mail invitation to participate in an online survey was sent to hospital laboratories in Malaysia (n=140). Questions regarding methods for measuring creatinine, equations for calculating eGFR, eGFR reporting, the terminology used in reporting urine albumin, types of samples and the cut-off values used for normal albuminuria.

    RESULTS: A total of 42/140 (30%) laboratories answered the questionnaire. The prevalent method used for serum creatinine measurement was the Jaffé method (88.1%) traceable to isotope-dilution mass spectrometry. eGFR was reported along with serum creatinine by 61.9% of laboratories while 33.3% of laboratories report eGFR on request. The formula used for eGFR reporting was mainly MDRD (64.3%) and results were reported as exact numbers even when the eGFR was <60 ml/min/1.73m2. The term microalbumin is still used by 83.3% of laboratories. There is a large heterogeneity among the labs regarding the type of sample recommended for measuring urine albumin, reference interval and reporting units.

    CONCLUSION: It is evident that the laboratory assessment of chronic kidney disease in Malaysia is not standardised. It is essential to provide a national framework for standardised reporting of eGFR and urine albumin. Recommendations developed by the MACB CKD Task Force, if adopted by all laboratories, will lead to a reduction in this variability.

  8. Lee LY, Lee J, Niduvaje K, Seah SS, Atmawidjaja RW, Cheah FC
    J Paediatr Child Health, 2020 Mar;56(3):400-407.
    PMID: 31618507 DOI: 10.1111/jpc.14634
    AIM: A collaborative study was conducted between two Southeast Asian university hospitals to compare the nutritional intervention and growth outcomes and evaluate the extent of post-natal growth faltering (PNGF) among very low birthweight (VLBW) infants.

    METHODS: Data of all infants admitted during the 2011-2012 period to the two hospitals at Singapore (SG) and Malaysia (MY) were pooled and analysed.

    RESULTS: Of the 236 infants, SG infants received lower total protein and energy intake than MY infants (2.69 vs. 3.54 g/kg/day and 92.4 vs. 128.9 kcal/kg/day respectively; P -2 SDS (55 vs. 16%; P = 0.001). The greater use of a diuretic in SG to treat haemodynamically significant patent ductus arteriosus (hsPDA) may have contributed to the higher PNGF rate. Mean growth velocity of at least 15 g/kg/day was attained by VLBW infants only from Day 14 and by ELBW infants only from Day 28 post-natally. Overall, severe PNGF rates (z-score change >-2 SDS at 36 weeks' corrected age) were 28.8 and 36.5% for VLBW and ELBW infants, respectively.

    CONCLUSIONS: Being very preterm, ELBW with hsPDA and receiving insufficient protein and energy were risk factors for severe PNGF. Increasing protein and energy content, augmenting fortification of breast milk and concentrating feed volumes, especially if there is an hsPDA, may curb severe PNGF among these infants.

  9. Lee XJ, Lee LY, Gan S, Thangalazhy-Gopakumar S, Ng HK
    Bioresour Technol, 2017 Jul;236:155-163.
    PMID: 28399419 DOI: 10.1016/j.biortech.2017.03.105
    This research investigated the potential of palm kernel shell (PKS), empty fruit bunch (EFB) and palm oil sludge (POS), abundantly available agricultural wastes, as feedstock for biochar production by slow pyrolysis (50mLmin(-1) N2 at 500°C). Various characterization tests were performed to establish the thermochemical properties of the feedstocks and obtained biochars. PKS and EFB had higher lignin, volatiles, carbon and HHV, and lower ash than POS. The thermochemical conversion had enhanced the biofuel quality of PKS-char and EFB-char exhibiting increased HHV (26.18-27.50MJkg(-1)) and fixed carbon (53.78-59.92%), and decreased moisture (1.03-2.26%). The kinetics of pyrolysis were evaluated by thermogravimetry at different heating rates (10-40°C). The activation energies determined by Kissinger-Akahira-Sunose and Flynn-Wall-Ozawa models were similar, and comparable with literature data. The findings implied that PKS and EFB are very promising sources for biochars synthesis, and the obtained chars possessed significant biofuel potential.
  10. Lai KC, Hiew BYZ, Lee LY, Gan S, Thangalazhy-Gopakumar S, Chiu WS, et al.
    Bioresour Technol, 2019 Feb;274:134-144.
    PMID: 30502604 DOI: 10.1016/j.biortech.2018.11.048
    Graphene oxide/chitosan aerogel (GOCA) was prepared by a facile ice-templating technique without using any cross-linking reagent for metanil yellow dye sequestration. The adsorption performance of GOCA was investigated by varying the adsorbent mass, shaking speed, initial pH, contact time, concentration and temperature. The combined effects of adsorption parameters and the optimum conditions for dye removal were determined by response surface methodology. GOCA exhibited large removal efficiencies (91.5-96.4%) over a wide pH range (3-8) and a high adsorption capacity of 430.99 mg/g at 8 mg adsorbent mass, 400 mg/L concentration, 35.19 min contact time and 175 rpm shaking speed. The adsorption equilibrium was best represented by the Langmuir model. GOCA could be easily separated after adsorption and regenerated for re-use in 5 adsorption-desorption cycles thereby maintaining 80% of its adsorption capability. The relatively high adsorption and regeneration capabilities of GOCA render it an attractive adsorbent for treatment of azo dye-polluted water.
  11. Lai KC, Lee LY, Hiew BYZ, Thangalazhy-Gopakumar S, Gan S
    J Environ Sci (China), 2019 May;79:174-199.
    PMID: 30784442 DOI: 10.1016/j.jes.2018.11.023
    The remediation of wastewater requires treatment technologies which are robust, efficient, simple to operate and affordable such as adsorption. Lately, three-dimensional (3D) graphene based materials have attracted significant attention as effective adsorbents for wastewater treatment. The intrinsic properties of 3D graphene structure such as large surface area and interconnected porous structure can facilitate the transport of pollutants into the 3D network and provide abundant active sites for trapping the pollutants. For the synthesis of 3D graphene structure, ice-templating is commonly practiced due to its facile steps, cost effectiveness and high scalability potential. This review covers the ice-templating fabrication technique for 3D graphene based materials and their application as adsorbents in eliminating dyes and heavy metals from aqueous media. The assembly mechanisms of the ice-templating fsynthesis are comprehensively discussed. Further discussion on the fundamental principles, critical process parameters and characteristics of ice-templated 3D graphene structures is also included. A thorough review on the mechanisms for batch adsorption of dyes and heavy metals is presented based on the structures and properties of the 3D graphene materials. The review further evaluates the dynamic adsorption in packed columns and the regeneration of 3D graphene based materials.
  12. Chong YY, Thangalazhy-Gopakumar S, Ng HK, Lee LY, Gan S
    J Environ Manage, 2019 Oct 01;247:38-45.
    PMID: 31229784 DOI: 10.1016/j.jenvman.2019.06.049
    Fast pyrolysis is a potential technology for converting lignocellulosic biomass into bio-oil. Nevertheless, the high amounts of acid, oxygenated compounds, and water content diminish the energy density of the bio-oil and cause it to be unsuitable for direct usage. Catalytic fast pyrolysis (CFP) is able to improve bio-oil properties so that downstream upgrading processes can be economically feasible. Here, calcium oxide (CaO), magnesium oxide (MgO), and zinc oxide (ZnO) were employed due to their potential in enhancing bio-oil properties. The results showed that overall, all three catalysts positively impacted the empty fruit bunch fibre-derived bio-oil properties. Among the catalysts, CaO showed the most favorable effects in terms of reducing the acidity of the bio-oil and anhydrosugar. Thermal stability of bio-oils produced in the presence of CaO was studied as well.
  13. Lai KC, Lee LY, Hiew BYZ, Thangalazhy-Gopakumar S, Gan S
    Bioresour Technol, 2020 Aug;309:123296.
    PMID: 32330800 DOI: 10.1016/j.biortech.2020.123296
    Xanthan integrated graphene oxide functionalized by titanium dioxide was successfully prepared through facile, eco-friendly and cost effective ice-templating technique. The three-dimensional (3D) graphene composite demonstrated relatively high temperature stability, chemical functionalities and porous sponge-like structure. The adsorption of lead was favored by high initial concentration and shaking speed at the operational solution pH. The process equilibrium and kinetic adhered to the Langmuir and pseudo-second-order correlations, respectively. The biomass integrated graphene composite showed maximum adsorption capacities ranging from 132.18 to 199.22 mg/g for 30-70 °C. Moreover, it was highly regenerable under mild conditions (0.1 M hydrochloric acid, 30 °C) and used repeatedly while retaining 84.78% of its initial adsorption capacity at the fifth adsorption-regeneration cycle. With comparatively high lead adsorption capacities, adequate recyclability and environmentally friendliness, the as-prepared 3D graphene composite has high application potential in heavy metal-wastewater separation for protection of the environment and human health.
  14. Tan TL, Chiew SC, Laang ST, Umabalan, Khor SH, Lee LY
    Med J Malaysia, 2021 09;76(5):630-636.
    PMID: 34508367
    INTRODUCTION: Pseudomonas aeruginosa is known to be the epitome of nosocomial infections associated with high morbidity and mortality. The dearth of local pseudomonal studies has prompted us to conduct this study with the following objectives: (1) to examine the local pseudomonal bacteraemia (PB) epidemiology and clinical characteristics, (2) to compare the 30-day mortality among PB of different onsets and (3) to determine the predictors of 30-day mortality outcome.

    METHODS: This retrospective study was conducted in Hospital Seri Manjung, Perak, Malaysia. All cases of blood culture proven PB that occurred between 1st January 2015 and 31st December 2019 were reviewed. Subjects below 12 year old and whose index blood cultures grew more than one organism were excluded. Demographic, clinical and treatment data were collected using pre-tested data collection forms and analysed using SPSS version 20.0.

    RESULTS: Among the 59 subjects included, healthcare associated (HCA) infections were the most prevalent, next to hospital onset (HO) and community onset (CO) infections. The commonest underlying comorbidities were cardiovascular disease, diabetes mellitus, and chronic kidney disease. Respiratory tract was the most frequently implicated source amongst all, while the urinary tract was more frequently implicated as the source of infection among HCA cases. Seventeen patients were admitted to ICU, and they were predominantly from the HO group. Despite having a higher rate of adequate empirical antibiotics administered, the HO group reported the lowest 30-day survival rate. Multiple logistic regression analysis demonstrated the following were independent predictors of 30-day mortality: requiring mechanical ventilator support, requiring central venous line insertion, not requiring surgery, and receiving inappropriate definite antibiotics.

    CONCLUSION: The incidence of community onset PB was appreciably low, as cases were predominantly HCA and HO in origin. Significant morbidities were observed among pseudomonal infections, with HO infections portending the worst prognosis. Lastly, prognostic factors for determining the mortality caused by PB depended more on the severity of sepsis than the timeliness of appropriate antibiotics.

  15. Tan TL, Tan-Loh J, Chiew SC, Lim KH, Ng WW, Akmal M, et al.
    Med J Malaysia, 2021 Nov;76(6):820-827.
    PMID: 34806667
    INTRODUCTION: Despite the ever-growing number of community onset (CO) Pseudomonas aeruginosa (P. aeruginosa) bacteraemia, there is a dearth of district hospital-based research examining this significant infection, which is associated with high mortality. The objectives of this study were as following: (1) to determine the risk factors of CO P. aeruginosa bacteraemia, (2) to compare the 30-day mortality rate between P. aeruginosa and Escherichia coli bacteraemia and (3) to identify the predictors of 30-day mortality for CO gram negative bacteraemia.

    METHODS: This is a retrospective case control study in Hospital Seri Manjung and Hospital Teluk Intan, Perak, Malaysia. P. aeruginosa bacteraemia cases that occurred between 1st January 2015 to 31st December 2019 were included, whilst E. coli bacteraemia cases that occurred within the same period were recruited successively until 1:2 case control ratio was achieved. Subjects below 12-year-old and those with polymicrobial bacteraemia were excluded. Demographic, clinical and treatment data were collected using pre-tested data collection forms by trained investigators.

    RESULTS: A total of 61 patients with P. aeruginosa bacteraemia and 122 patients with E. coli bacteraemia were included. Recent admission in the earlier three months, regular haemodialysis, immunosuppressive therapy in the past 30 days, chronic wound/pressure sore at presentation and indwelling urinary catheter at presentation were identified as independent predictors of CO pseudomonal bacteraemia. Whilst older age was identified as a negative predictor of CO Pseudomonal bacteraemia (all p<0.05). The 30-day mortality rate was 34.4% in subjects with P. aeruginosa bacteraemia and 27.0% in those with E. coli bacteraemia (p=0.302). Predictors of 30-day mortality for community onset gram negative bacteraemia were as follow: older age, underlying solid tumours, neutropaenia at presentation, in-patient mechanical ventilation, and inpatient nasogastric tube insertion. Unexpectedly, receipt of inappropriate empirical antibiotics which was switched later (delayed and non-delayed switching) was identified as the negative predictors of mortality (all p<0.05).

    CONCLUSION: It is prudent to restrict the usage of empirical anti-pseudomonal antibiotics among individuals at risk as liberal usage of broad-spectrum antibiotics engenders emergence of drug resistant organism, particularly in district setting where community onset pseudomonal bacteraemia remains scarce. Subjects with elevated risk of mortality should receive early escalation of care as per sepsis management guidelines.

  16. Lee XJ, Lee LY, Hiew BYZ, Gan S, Thangalazhy-Gopakumar S, Kiat Ng H
    Bioresour Technol, 2017 Dec;245(Pt A):944-953.
    PMID: 28946195 DOI: 10.1016/j.biortech.2017.08.175
    This research investigated the removal of lead (Pb(2+)) by a novel biochar derived from palm oil sludge (POS-char) by slow pyrolysis. Multistage optimizations with central composite design were carried out to firstly optimize pyrolysis parameters to produce the best POS-char for Pb(2+) removal and secondly to optimize adsorption conditions for the highest removal of Pb(2+). The optimum pyrolysis parameters were nitrogen flowrateof30mLmin(-1), heating rateof10°Cmin(-1), temperatureof500°C and timeof30min. The optimum Pb(2+) adsorption conditions were concentrationof200mgL(-1), timeof60min, dosageof0.3g and pH of 3.02. The various functional groups within POS-char played a vital role in Pb(2+) uptake. Regeneration was demonstrated to be feasible using hydrochloric acid. Adsorption equilibrium was best described by Freundlich model. At low concentration range, adsorption kinetic obeyed pseudo-first-order model, but at high concentration range, it followed pseudo-second-order model. Overall, the results highlighted that POS-char is an effective adsorbent for Pb(2+) removal.
  17. Ooi J, Lee LY, Hiew BYZ, Thangalazhy-Gopakumar S, Lim SS, Gan S
    Bioresour Technol, 2017 Dec;245(Pt A):656-664.
    PMID: 28917100 DOI: 10.1016/j.biortech.2017.08.153
    In this study, AB113 dye was successfully sequestered using a novel adsorbent made of mixed fish scales (MFS). The influence of adsorbent dosage, initial pH, temperature, initial concentration and contact time on the adsorption performance was investigated. The surface chemistry and morphology of the adsorbent were examined by FTIR, TGA and SEM. Amides, phosphate and carbonate groups were evidently responsible for the high affinity of MFS towards the dye. The adsorption equilibrium and kinetic were well described by Langmuir and pseudo-second-order models, respectively. The maximum adsorption capacities of MFS were 145.3-157.3mg/g at 30-50°C. The adsorption of AB113 dye onto the adsorbent was exothermic and spontaneous as reflected by the negative enthalpy and Gibbs energy changes. The results support MFS asa potential adsorbent for AB113 dye removal.
  18. Lee LY, Tan CY, Wong KT, Goh KJ, Shahrizaila N
    J Clin Neurosci, 2023 Jan;107:40-47.
    PMID: 36502780 DOI: 10.1016/j.jocn.2022.11.017
    BACKGROUND: With progress made in neurogenetics and neuroinflammation, the indications and value of nerve biopsies in the diagnostic evaluation of peripheral neuropathies are less clear. In this study, we aimed to evaluate the diagnostic yield of nerve biopsies in patients with peripheral neuropathies.

    METHODS: We performed a retrospective review of nerve biopsy reports from April 1998 to June 2021 of patients with peripheral neuropathies presenting to the Department of Pathology, University of Malaya Medical Centre, Kuala Lumpur, Malaysia. The diagnostic value of the biopsies was determined based on the criteria by Midroni and Bilbao as follows: contributive (essential and helpful), non-contributive and inadequate.

    RESULTS: A total of 107 nerve biopsies were analysed. Sixty-four (60 %) were males and the mean age was 52 years, ranging from 13 to 86 years. Ninety-four (88 %) were sural nerve biopsies; and only one patient (1 %) each had superficial peroneal and superficial radial nerve biopsy. The indications for the procedure were vasculitis (34 %), peripheral neuropathy of unknown aetiology (34 %), amyloidosis (14 %) and chronic inflammatory demyelinating polyneuropathy (10 %). In 68 (63 %) biopsies, the diagnostic value was contributive. Of these, 28 (26 %) were essential and 40 (37 %) were helpful. In contrast, 35 (33 %) biopsies were non-contributive and 4 (4 %) were inadequate. In 66 % (71/107) of cases, the nerve biopsy did not reveal a definite pathological diagnosis. However, in the remainder, a diagnosis of vasculitis (18 %, 19/107), followed by amyloidosis (10 %, 11/107) could be determined. For 32/71 biopsies with undetermined pathological diagnosis, neuropathy remained cryptogenic in 22 % (7/32) upon follow up.

    CONCLUSIONS: With the exception of vasculitis and amyloidosis, there is limited value in performing nerve biopsies in the evaluation of patients with peripheral neuropathy. However, this should be interpreted with caution as the number of patients with a clinical diagnosis of vasculitis and amyloidosis were relatively larger than patients with other diagnosis. Refinement and careful selection of cases are required to increase the diagnostic yield of nerve biopsy.

  19. Hiew BYZ, Lee LY, Lee XJ, Thangalazhy-Gopakumar S, Gan S
    Environ Sci Pollut Res Int, 2021 Aug;28(30):40608-40622.
    PMID: 32601866 DOI: 10.1007/s11356-020-09594-3
    Heavy metals released by various industries are among the major pollutants found in water resources. In this research, biosorption technique was employed to remove cadmium (Cd2+) from an aqueous system using a novel biosorbent developed from okara waste (OW), a residue from soya bean-based food and beverage processing. Characterisation results revealed that the OW biosorbent contained functional groups such as hydroxyl-, carboxyl- and sulphur-based functional groups, and the surface of the biosorbent was rough with multiple fissures which might be the binding sites for the pollutant. The effects of dosage, solution pH, initial Cd2+ concentration, temperature and contact time were investigated using batch adsorption mode. The biosorption equilibrium and kinetic were best described by the Langmuir and Elovich models, respectively. The maximum biosorption capacities predicted by the Langmuir model were 10.91-14.80 mg/g at 30-70 °C, and the biosorption process was favourable as evident from 0 < RL < 1. The uptake of Cd2+ by the OW biosorbent was spontaneous and endothermic. The plausible biosorption mechanisms of this study could be ionic exchange, hydrogen bonding and electrostatic interactions. The Cd2+ loaded OW biosorbent could be regenerated using 0.4 M of HCl solution and regeneration was studied for 4 adsorption-desorption cycles. The present investigation supported that OW can be reused as a value-added biosorbent product for the removal of Cd2+ from the contaminated water.
  20. Lim SH, Tan TL, Ngo PW, Lee LY, Ting SY, Tan HJ
    Med J Malaysia, 2023 Mar;78(2):241-249.
    PMID: 36988537
    INTRODUCTION: Time is the greatest challenge in stroke management. This study aimed to examine factors contributing to prehospital delay and decision delay among stroke patients.

    MATERIALS AND METHODS: A cross-sectional study involving acute stroke patients admitted to Seri Manjung Hospital was conducted between August 2019 and October 2020 via faceto- face interview. Prehospital delay was defined as more than 120 minutes taken from recognition of stroke symptoms till arrival in hospital, while decision delay was defined as more than 60 minutes taken from recognition of stroke symptoms till decision was made to seek treatment.

    RESULTS: The median prehospital delay of 102 enrolled patients was 364 minutes (IQR 151.5, 1134.3) while the median for decision delay was 120 minutes (IQR 30.0, 675.0). No history of stroke (adj. OR 4.15; 95% CI 1.21, 14.25; p=0.024) and unaware of thrombolysis service (adj. OR 17.12; 95% CI 1.28, 229.17; p=0.032) were associated with higher odds of prehospital delay, while Indian ethnicity (adj. OR 0.09; 95% CI 0.02, 0.52; p=0.007) was associated with lower odds of prehospital delay as compared to Malay ethnicity. On the other hand, higher National Institutes of Health Stroke Scale (NIHSS) score (adj. OR 0.86; 95% CI 0.78, 0.95; p=0.002) was associated with lower odds of decision delay.

    CONCLUSION: Public awareness is crucial to shorten prehosital delay and decision delay for better patients' outcomes in stroke. Various public health campaigns are needed to improve the awareness for stroke.

Related Terms
Filters
Contact Us

Please provide feedback to Administrator (afdal@afpm.org.my)

External Links