Methods: One hundred and eighty standardized disc samples were prepared, of which ninety samples each were used for surface roughness and microhardness test, respectively. They were divided equally into: Group 1 (Filtek-Z350-XT), Group 2 (Zmack-Comp), and Group 3 (Zr-Hybrid). For surface roughness test, all samples were polished with aluminium oxide discs and further subdivided into aged and unaged subgroups, in which composite samples in aged subgroups were subjected to 2500 thermal cycles. Next, all the samples were subjected to surface roughness test using a contact stylus profilometer. As for microhardness test, all the aged and unaged samples were tested using a Vickers hardness machine with a load of 300 kgf for 10 s and viewed under a digital microscope to obtain microhardness value. Data were analyzed using two-way ANOVA followed by post hoc Tukey's honestly significant difference and paired sample t-test with significance level set at P = 0.05.
Results: In both the aged and unaged groups, Zr-Hybrid showed statistically significantly lower surface roughness (P < 0.05) than Filtek-Z350-XT and Zmack-Comp, but no statistically significant difference was noted between Filtek-Z350-XT and Zmack-Comp (P > 0.05). A similar pattern was noted in microhardness test, whereby Zr-Hybrid showed the highest value (P < 0.05) followed by Filtek-Z350-XT and lastly Zmack-Comp. Besides, significant differences in surface roughness and microhardness were noted between the aged and unaged groups.
Conclusion: Zr-Hybrid seems to demonstrate better surface roughness and microhardness value before and after artificial ageing.
Material and Methods: Eighty mature permanent maxillary lateral incisors from patients age range of 30-60 years with single canal were selected and randomly divided into: Group 1 - RCT + nanofilled composite (Filtek), Group 2 - RCT + microhybrid composite (Zmack), Group 3 - RCT + new nanohybrid composite (Zr-Hybrid) and Group 4 - Intact teeth (control). Standardized mesio-palatal-distal cavity was prepared, and endodontic treatment was carried out using crown-down technique until size 30, tapered 0.04. Obturation was completed using single cone technique with gutta-percha and AH plus sealer. Cavity access was restored with respective composite resins. Next, teeth were stored in incubator for 24 hours and subdivided into aged and unaged subgroups. Teeth in aged subgroups were subjected to 2500 thermal cycles for 5ºC, 37ºC and 55ºC with 30 seconds dwell time and 5 seconds transfer time. After that, root surfaces of teeth were covered with silicone-based material and placed in boxes filled with acrylic until the cemento-enamel-junction (CEJ) level. They were then tested under Universal Testing Machine until fracture occurred. Samples were then viewed under Leica microscope to determine the fracture pattern and type of fracture. Data analyzed using One-way ANOVA complimented by post hoc Tukey HSD and paired sample T test for fracture strength. Fracture pattern and type of fracture were analyzed using Chi-square test. Level of significance was set at p<0.05.
Results: Significant differences were observed (p<0.05) with Group 3 demonstrating the highest fracture strength followed by Group 4, Group 1 and lastly Group 2 in both aged and unaged subgroups respectively. A significant decreased in fracture strength was noted in Group 1 and Group 2 (p<0.05) as number of thermocycle increased but no significant differences were noted in Group 3 and Group 4 (p>0.05). Besides, Group 3 and Group 4 showed higher rate of favorable fracture pattern, followed by Group 1 and lastly Group 2. Most favorable fracture pattern was noted to exhibit horizontal fracture type (86.36%), whereas most unfavorable fracture pattern exhibited vertical fracture type (77.78%).
Conclusions: Endodontically treated teeth restored with new zirconia reinforced rice husk nanohybrid composite (Zr-Hybrid) demonstrated higher fracture strength than commercialized composite resins especially after artificial ageing. Zr-Hybrid showed similar fracture pattern to those of intact teeth with higher rate of horizontal fracture type. Key words:Fracture strength, fracture pattern, composite resin, rice husk, Zirconia.
MATERIALS AND METHODS: The search was performed without any restriction on the study design, publication year, or language using the Web of Science (WoS) group of Clarivate Analytics enabling the search through "All Databases." Based on the citation count as available in WoS, the articles were sorted in a descending manner. Information regarding each article was then extracted, which included its authorship, counts of citation (in other databases), citation density, current citation index (2019), publication year, country of publication, journal of article, evidence level based on study design, and keywords description.
RESULTS: The count of citation for each article varied in each database, that is, 175 to 2,003 in WoS, 89 to 1,981 in Scopus, and 126 to 3,492 when searched in Google Scholar. The highest number of articles (n = 10) related to dental caries were published in 2004. A total of 301 authors made valuable contributions to this field, out of which J.D. Featherstone had coauthored 6 articles. A significant negative correlation (p < 0.01) was found between the age of the article and the citation density (r =-0.545). However, a nonsignificant correlation (p = 0.952) occurred between the age of publication and the citation count (r = 0.006).
CONCLUSION: The results of this systematic review provide a critical appraisal of the context underpinning scientific developments in the field of dental caries and also highlighted trends in clinical management and research.
METHOD: This retrospective review included 407 antenatal mothers diagnosed with anaemia at 36±1 weeks of gestation at all 10 health clinics in Alor Gajah between January and December 2018.
RESULTS: According to the district annual returns, 2,407 antenatal mothers (36 weeks of gestation) were registered in the health clinics in Alor Gajah in 2018. Among them, the prevalence of anaemia was 18.6% (n=448). However, there were only 407 cards found. Most participants were Malays (89.4%), aged 20-40 years (93.6%) and married (96.3%). Almost all anaemia cases (96.5%) were mild (Hb level of 9-10.9 g/dL). Approximately 34.4% of the mothers were already anaemic at booking; 77.6% belonged to the B40 income group; and 31.6% had poor pregnancy spacing of <2 years. Iron deficiency anaemia was the most common type of anaemia (51.0%), followed by dilutional anaemia (34.0%), which did not normalise at 36 weeks of gestation. Anaemia was associated with lower educational (p<0.05) and Hb levels at booking (p<0.001).
CONCLUSION: Having normal maternal Hb levels in early pregnancy especially at booking is crucial, as it may reduce the possibility of anaemia during pregnancy. Early screening and supplementation of at-risk pregnancies may be applied as a preventive strategy. Suitable methods of iron treatment and investigation need further exploration.