Displaying publications 1 - 20 of 30 in total

Abstract:
Sort:
  1. Rafatullah M, Sulaiman O, Hashim R, Ahmad A
    J Hazard Mater, 2009 Oct 30;170(2-3):969-77.
    PMID: 19520510 DOI: 10.1016/j.jhazmat.2009.05.066
    The present study proposed the use of meranti sawdust in the removal of Cu(II), Cr(III), Ni(II) and Pb(II) ions from synthetic aqueous solutions. Batch adsorption studies showed that meranti sawdust was able to adsorb Cu(II), Cr(III), Ni(II) and Pb(II) ions from aqueous solutions in the concentration range 1-200mg/L. The adsorption was favoured with maximum adsorption at pH 6, whereas the adsorption starts at pH 1 for all metal ions. The effects of contact time, initial concentration of metal ions, adsorbent dosage and temperature have been reported. The applicability of Langmuir, Freundlich, and Dubinin-Radushkevich (D-R) isotherm was tried for the system to completely understand the adsorption isotherm processes. The adsorption kinetics tested with pseudo-first-order and pseudo-second-order models yielded high R(2) values from 0.850 to 0.932 and from 0.991 to 0.999, respectively. The meranti sawdust was found to be cost effective and has good efficiency to remove these toxic metal ions from aqueous solution.
  2. Emelia O, Zeehaida M, Sulaiman O, Rohela M, Saadatnia G, Yeng C, et al.
    J Immunoassay Immunochem, 2010;31(1):79-91.
    PMID: 20391020 DOI: 10.1080/15321810903405134
    We have developed an ELISA that employs monoclonal anti-Toxoplasma SAG1 (p30) as the capture antibody to detect T. gondii circulating antigens in patients' serum samples. Using serum spiked with Toxoplasma soluble and with SAG1 recombinant proteins, the detection limits were 31.25 ng/mL and 62.50 ng/mL, respectively. We obtained positive results in 28% (21/75) and 11% (23/206) of probable active and chronic toxoplasmosis serum samples, respectively. Western blot analysis on pooled antigen-positive serum samples showed antigenic bands of molecular weights 25 and 75 kDa from sera of probable active infection and five antigenic bands ranging in size from 26 to 33 kDa from chronic infection sera. This assay would be useful as an initial serum selection step in developing a Toxoplasma antigen detection test and for characterization studies.
  3. Ahmad A, Rafatullah M, Sulaiman O, Ibrahim MH, Hashim R
    J Hazard Mater, 2009 Oct 15;170(1):357-65.
    PMID: 19464117 DOI: 10.1016/j.jhazmat.2009.04.087
    Meranti (Philippine mahogany) sawdust, an inexpensive material, showed strong scavenging behaviour through adsorption for the removal of methylene blue (MB) from aqueous solution. Batch studies were performed to evaluate and optimize the effects of various parameters such as contact time, pH, initial dye concentrations and adsorbent dosage. Langmuir, Freundlich and Temkin isotherms were used to analyze the equilibrium data at different temperatures. The experimental data fitted well with the Langmuir adsorption isotherm, indicating thereby the mono layer adsorption of the dye. The monolayer sorption capacity of meranti sawdust for MB was found to be 120.48, 117.64, 149.25 and 158.73 mg/g at 30, 40, 50 and 60 degrees C, respectively. Thermodynamic calculations showed that the MB adsorption process is endothermic and spontaneous in nature. Kinetic studies showed that the adsorption followed a pseudo-second-order kinetic model. The results indicated that the meranti sawdust could be an alternative material in place of more costly adsorbents used for dye removal.
  4. Rafatullah M, Sulaiman O, Hashim R, Ahmad A
    J Hazard Mater, 2010 May 15;177(1-3):70-80.
    PMID: 20044207 DOI: 10.1016/j.jhazmat.2009.12.047
    In this article, the use of low-cost adsorbents for the removal of methylene blue (MB) from solution has been reviewed. Adsorption techniques are widely used to remove certain classes of pollutants from waters, especially those which are not easily biodegradable. The removal of MB, as a pollutant, from waste waters of textile, paper, printing and other industries has been addressed by the researchers. Currently, a combination of biological treatment and adsorption on activated carbon is becoming more common for removal of dyes from wastewater. Although commercial activated carbon is a preferred adsorbent for color removal, its widespread use is restricted due to its relatively high cost which led to the researches on alternative non-conventional and low-cost adsorbents. The purpose of this review article is to organize the scattered available information on various aspects on a wide range of potentially low-cost adsorbents for MB removal. These include agricultural wastes, industrial solid wastes, biomass, clays minerals and zeolites. Agricultural waste materials being highly efficient, low cost and renewable source of biomass can be exploited for MB remediation. It is evident from a literature survey of about 185 recently published papers that low-cost adsorbents have demonstrated outstanding removal capabilities for MB.
  5. Hashim R, How LS, Kumar RN, Sulaiman O
    Bioresour Technol, 2005 Nov;96(16):1826-31.
    PMID: 16051090
    The flame retardancy of medium density fiberboard (MDF) made from mixture of rubberwood fibers and recycled old corrugated containers was studied. Aluminum trihydroxide (ATH) was used as a fire retardant additive and mixed with the fibers to manufacture experimental MDF panels using wet process. Phenol formaldehyde (PF) resin in liquid, 2% based on oven dry weight of fibers, was used along with 0%, 10%, 15% and 20% of ATH. The flame retardant test was done using the limiting oxygen index (LOI) test. The other properties investigated include internal bond strength, thickness swelling and water absorption. The results showed that ATH loading increased as the LOI of MDF increased. This demonstrated that ATH could improved the fire retardant property of MDF at sufficient loading. An increase in concentration of ATH showed an increase in the IB values of MDF made without resin. MDF panels made without resin showed a progressive increase in internal bond as the composition of recycled old corrugated containers fiber increased. Addition of resin improved internal bond strength and reduced thickness swelling, and water absorption. Thickness swelling of panel increased as the composition of recycled old corrugated containers fiber increased. Scanning electron microscopy (SEM) and energy dispersive X-ray analysis (EDAX) showed that there is indication of ATH and resin filling the void space in between fibers.
  6. Ahmad T, Rafatullah M, Ghazali A, Sulaiman O, Hashim R
    PMID: 21929380 DOI: 10.1080/10590501.2011.601847
    This article presents a review on the role of oil palm biomass (trunks, fronds, leaves, empty fruit bunches, shells, etc.) as adsorbents in the removal of water pollutants such as acid and basic dyes, heavy metals, phenolic compounds, various gaseous pollutants, and so on. Numerous studies on adsorption properties of various low-cost adsorbents, such as agricultural wastes and its based activated carbons, have been reported in recent years. Studies have shown that oil palm-based adsorbent, among the low-cost adsorbents mentioned, is the most promising adsorbent for removing water pollutants. Further, these bioadsorbents can be chemically modified for better efficiency and can undergo multiple reuses to enhance their applicability at an industrial scale. It is evident from a literature survey of more than 100 recent papers that low-cost adsorbents have demonstrated outstanding removal capabilities for various pollutants. The conclusion is been drawn from the reviewed literature, and suggestions for future research are proposed.
  7. Ahmad T, Rafatullah M, Ghazali A, Sulaiman O, Hashim R, Ahmad A
    PMID: 21069614 DOI: 10.1080/10590501.2010.525782
    In this review article, the use of various low-cost adsorbents for the removal of pesticides from water and wastewater has been reviewed. Pesticides may appear as pollutants in water sources, having undesirable impacts to human health because of their toxicity, carcinogenicity, and mutagenicity or causing aesthetic problems such as taste and odors. These pesticides pollute the water stream and it can be removed very effectively using different low-cost adsorbents. It is evident from a literature survey of about 191 recently published papers that low-cost adsorbents have demonstrated outstanding removal capabilities for pesticides.
  8. Sulaiman O, Hashim R, Wahab R, Ismail ZA, Samsi HW, Mohamed A
    Bioresour Technol, 2006 Dec;97(18):2466-9.
    PMID: 16524726
    Studies were carried out on heat treatment of bamboo species Gigantochloa scortechinii Gamble using palm oil. The samples were laminated and glued. The adhesion results showed that the delamination of glue line increased as the temperature and duration of oil heat treatment increased. Maximum load and shear strength of the glue line reduced as the heat treatment become more severe. It was found that the palm oil used as the heating medium penetrated in some parts of the cell wall as well as in the cell lumen of the bamboo.
  9. Sohni S, Hashim R, Nidaullah H, Lamaming J, Sulaiman O
    Int J Biol Macromol, 2019 Jul 01;132:1304-1317.
    PMID: 30922916 DOI: 10.1016/j.ijbiomac.2019.03.151
    The utilization of renewable and functional group enriched nano-lignin as bio-additve in fabricating composite has become the focus of attention worldwide. Herein, lignin nanoparticles in the form of hollow spheres with the diameter of the order of 138 ± 39 nm were directly prepared from agro-industrial waste (palm kernel shell) using recyclable tetrahydrofuran in an acidified aqueous system without any chemical modification steps. We then fabricated a new chitosan/nano-lignin composite material as highly efficient sorbent, as demonstrated by efficient removal (~83%) of methylene blue (MB) dye under natural pH conditions. The adsorption process obeyed pseudo-second-order kinetics and adequate fitting of the adsorption data using Langmuir model suggested a monolayer adsorption with a maximum adsorption capacity of 74.07 mg g-1. Moreover, thermodynamic study of the system revealed spontaneous and endothermic nature of the sorption process. Further studies revealed that chitosan composite with nano-lignin showed better performance in dye decontamination compared to native chitosan and chitosan/bulk lignin composite. This could essentially be attributed to synergistic effects of size particularity (nano-effect) and incorporated functionalities due to lignin nanoparticles. Recyclability study performed in four repeated adsorption/regeneration cycles revealed recyclable nature of as-prepared composite, whilst adsorption experiments using spiked real water samples indicated recoveries as high as 89%. Based on this study, as-prepared bio-nanocomposite may thus be considered as an efficient and reusable adsorptive platform for the decontamination of water supplies.
  10. Lamaming J, Hashim R, Leh CP, Sulaiman O
    Carbohydr Polym, 2017 Jan 20;156:409-416.
    PMID: 27842840 DOI: 10.1016/j.carbpol.2016.09.053
    Cellulose nanocrystals were isolated from oil palm trunk by total chlorine free method. The samples were either water pre-hydrolyzed or non-water pre-hydrolyzed, subjected to soda pulping, acidified and ozone bleached. Cellulose and cellulose nanocrystal (CNC) physical, chemical, thermal properties, and crystallinity index were investigated by composition analysis, scanning electron microscopy, transmission electron microscopy, fourier transform infrared, thermogravimetric analysis and X-ray diffraction. Water pre-hydrolysis reduced lignin (<0.5%) and increased holocellulose (99.6%) of ozone-bleached cellulose. Water pre-hydrolyzed cellulose exhibited surface fibrillation and peeling off after acid hydrolysis process compared to non-fibrillated of non-water pre-hydrolyzed cellulose. Water pre-hydrolysis improved final CNC crystallinity (up to 75%) compared to CNC without water pre-hydrolysis crystallinity (69%). Cellulose degradation was found to occur during ozone bleaching stage but CNC showed an increase in crystallinity after acid hydrolysis. Thus, oil palm trunk CNC can be potentially applied in pharmaceutical, food, medical and nanocomposites.
  11. Wan Omar A, Sulaiman O, Yusof S, Ismail G, Fatmah MS, Rahmah N, et al.
    Malays J Med Sci, 2001 Jul;8(2):19-24.
    PMID: 22893756
    We have recently reported that a dipstick colloidal dye immunoassay (DIA) that detect parasite antigens in human serum is sensitive and specific for the diagnosis of active infection of lymphatic filariasis. Rabbit polyclonal antibodies (RbBmCAg) labelled with a commercial dye, palanil navy blue was used to detect filarial antigenemia among Indonesian and Bangladeshi immigrant workers (N= 630) at oil palm estates at Hulu Trengganu District, Peninsular Malaysia. Microfilaremia with Brugia malayi were detected in 51 (8.10 %) individuals, of which 42 (6.67 %) were among the Indonesians and 9 (1.98 %) among the Bangladeshis. Microfilaremia with Wuchereria bancrofti were detected in 33 (5.24 %) individuals of which 15 (2.38 %) were among the Indonesians and 18 (2.86 %) among the Bangladeshis workers. The DIA detected 96 (15.24 %) antigenemic cases which comprise of all the microfilaremic cases and 15 (2.38 %) amicrofilaremic cases. The amicrofilaremic cases with filarial antigenemia consisted of 9 (1. 43 %) Indonesians and 6 (0.95%) Bangladeshis. We have used 6 ul of the RbBmCAg and diluted (1:10) patients' sera per dipstick which make the DIA reagent conservative. The DIA is a rapid test and can be read in approximate 2 hours.. Additionally, coloured dots developed in the DIA can be qualitatively assessed visually for intensity. The DIA does not require sophisticated equipment or radioactivity, and therefore suitable for field application.
  12. Coulibaly AY, Hashim R, Sulaiman SF, Sulaiman O, Ang LZ, Ooi KL
    Asian Pac J Trop Med, 2014 Sep;7S1:S553-9.
    PMID: 25312183 DOI: 10.1016/S1995-7645(14)60289-3
    OBJECTIVE: To evaluate antioxidant activities of seven medicinal plant species and their fractions, and to identify their phenolic compounds.

    METHODS: Two extractions were processed and further fractionated by column chromatography to evaluate the concentration that inhibit 50% of 2,2'-azinobis (3-ethylbenzothiazoline-6-suslfonic acid, 1,1-diphenyl-2-picryl-hydrazyl radicals, and their ferric reducing antioxidant power. The identification of the fractions of phenolic compounds was done by ultra performance liquid chromatography.

    RESULTS: The aqueous-acetone extracts of Feretia apodanthera and Ozoroa insignis exhibited the highest antioxidant potentials comparable to those of the standard quercetin. Their subsequently silica gel column fractionation showed three most active fractions from which the major constituents quercetin, myricetin, kampferol, rutin and isoquercetin were identified.

    CONCLUSIONS: These plant species have potent antioxidant profiles and polyphenol compounds that may help to manage with radical related disease and aging.

  13. Abdul Jalil RM, Yahya N, Sulaiman O, Wan Mat WR, Teo R, Izaham A, et al.
    Acta Anaesthesiol Taiwan, 2014 Jun;52(2):49-53.
    PMID: 25016507 DOI: 10.1016/j.aat.2014.05.007
    The basis for the transversus abdominis plane (TAP) block involves infiltration of a local anesthetic into the neurofascial plane between the internal oblique and the transversus abdominis muscles, causing a regional block that spreads between the L1 and T10 dermatomes. Thus, the TAP block is said to be suitable for lower abdominal surgery. This study was designed to compare the analgesic efficacy of two different concentrations of ropivacaine for TAP block in patients undergoing appendectomy.
  14. Ibrahim MN, Ngah WS, Norliyana MS, Daud WR, Rafatullah M, Sulaiman O, et al.
    J Hazard Mater, 2010 Oct 15;182(1-3):377-85.
    PMID: 20619537 DOI: 10.1016/j.jhazmat.2010.06.044
    The present study explores the ability of modified soda lignin (MSL) extracted from oil palm empty fruit bunches (EFB) in removing lead (II) ions from aqueous solutions. The effect of contact time, point zero charge (pH(pzc)) and pH of the solution, initial metal ion concentration and adsorbent dosage on the removal process were investigated. Furthermore, the MSL is characterized by SEM, XRF, FT-IR and surface area analysis. Equilibrium adsorption isotherms and kinetics were investigated. The experimental data were analyzed by the Langmuir, Freundlich and Temkin models of adsorption. The kinetic data obtained at different initial concentrations were analyzed using pseudo-first-order and pseudo-second-order models. The results provide strong evidence to support the hypothesis of adsorption mechanism.
  15. Rathi DN, Amir HG, Abed RM, Kosugi A, Arai T, Sulaiman O, et al.
    J Appl Microbiol, 2013 Feb;114(2):384-95.
    PMID: 23176757 DOI: 10.1111/jam.12083
    Halophilic micro-organisms have received much interest because of their potential biotechnological applications, among which is the capability of some strains to synthesize polyhydroxyalkanoates (PHA). Halomonas sp. SK5, which was isolated from hypersaline microbial mats, accumulated intracellular granules of poly(3-hydroxybutyrate) [P(3HB)] in modified accumulation medium supplemented with 10% (w/v) salinity and 3% (w/v) glucose.
  16. Lamaming J, Hashim R, Leh CP, Sulaiman O, Sugimoto T, Nasir M
    Carbohydr Polym, 2015 Dec 10;134:534-40.
    PMID: 26428155 DOI: 10.1016/j.carbpol.2015.08.017
    In this study cellulose nanocrystals were isolated through acid hydrolysis process from parenchyma and vascular bundle of oil palm trunk (Elaeis guineensis). The morphological properties of obtained cellulose nanocrystals were studied by scanning electron microscopy (SEM) and transmission electron microscopy (TEM). The microscopy images showed smoother and cleaner surface of parenchyma cellulose nanocrystals when compared to vascular bundle cellulose nanocrystals. The TEM image shows a higher length and diameter for parenchyma cellulose nanocrystals compared to vascular bundle cellulose nanocrystals. The Fourier transform infrared (FTIR) spectra showed changes in functional groups after acid hydrolysis due to removal of lignin, hemicelluloses and other impurities in both type of cellulose nanocrystals. Crystallinity index of cellulose nanocrystals was observed higher for vascular bundle as compared to parenchyma. Thermogravimetric analysis (TGA) was performed to study the thermal stability of cellulose nanocrystals and it was observed higher for parenchyma cellulose nanocrystals compared to vascular bundle.
  17. Lamaming J, Hashim R, Sulaiman O, Leh CP, Sugimoto T, Nordin NA
    Carbohydr Polym, 2015;127:202-8.
    PMID: 25965475 DOI: 10.1016/j.carbpol.2015.03.043
    In this study cellulose nanocrystals were isolated from oil palm trunk (Elaeis guineensis) using acid hydrolysis method. The morphology and size of the nanocrystals were characterized using scanning electron microscopy and transmission electron microscopy. The results showed that the nanocrystals isolated from raw oil palm trunk (OPT) fibers and hot water treated OPT fibers had an average diameter of 7.67 nm and 7.97 nm and length of 397.03 nm and 361.70 nm, respectively. Fourier Transform Infrared spectroscopy indicated that lignin and hemicellulose contents decreased. It seems that lignin was completely removed from the samples during chemical treatment. Thermogravimetric analysis demonstrated that cellulose nanocrystals after acid hydrolysis had higher thermal stability compared to the raw and hot water treated OPT fibers. The X-ray diffraction analysis increased crystallinity of the samples due to chemical treatment. The crystalline nature of the isolated nanocrystals from raw and hot water treated OPT ranged from 68 to 70%.
  18. Samson DO, Jafri MZM, Shukri A, Hashim R, Sulaiman O, Aziz MZA, et al.
    Radiat Environ Biophys, 2020 08;59(3):483-501.
    PMID: 32333105 DOI: 10.1007/s00411-020-00844-z
    For the first time, Rhizophora spp. (Rh. spp.) particleboard phantoms were developed using defatted soy flour (DSF) and soy protein isolate (SPI) modified by sodium hydroxide and itaconic acid polyamidoamine-epichlorohydrin (IA-PAE) adhesive. The microstructural characterization and X-ray diffraction patterns of the material revealed that the modified DSF and SPI adhesives became more compact and homogeneous when NaOH/IA-PAE was added, which prevented damage by moisture. It was confirmed that the composite is crystalline with (101), (002), and (004) orientations. Phantoms made of this material were scanned with X-ray computed tomography (CT) typically used for abdominal examinations with varying energies corresponding to 80, 120, and 135 kVp, to determine CT numbers, electron densities, and density distribution profiles. The radiation attenuation parameters were found to be not significantly different from those of water (XCOM) with p values [Formula: see text] 0.05 for DSF and SPI. The DSF- and SPI-based particleboard phantoms showed CT numbers close to those of water at the three X-ray CT energies. In addition, electron density and density distribution profiles of DSF-SPI-Rh. spp. particleboard phantoms with 15 wt% IA-PAE content were even closer to those of water and other commercial phantom materials at the three X-ray CT energies. It is concluded that DSF-SPI with NaOH/IA-PAE added can be used as a potential adhesive in Rh. spp. particleboard phantoms for radiation dosimetry.
  19. Ghalib RM, Chidan Kumar CS, Hashim R, Sulaiman O, Fun HK
    Acta Crystallogr E Crystallogr Commun, 2015 Jan 1;71(Pt 1):o6-7.
    PMID: 25705509 DOI: 10.1107/S2056989014025997
    In the title iso-quinoline-1,3,4-trione derivative, C18H9NO5, the five-membered ring of the indane fragment adopts an envelope conformation with the nitro-gen-substituted C atom being the flap. The planes of the indane benzene ring and the iso-quinoline-1,3,4-trione ring make a dihedral angle of 82.06 (6)°. In the crystal, mol-ecules are linked into chains extending along the bc plane via C-H⋯O hydrogen-bonding inter-actions, enclosing R 2 (2)(8) and R 2 (2)(10) loops. The chains are further connected by π-π stacking inter-ations, with centroid-to-centroid distances of 3.9050 (7) Å, forming layers parallel to the b axis.
  20. Widyasti E, Shikata A, Hashim R, Sulaiman O, Sudesh K, Wahjono E, et al.
    Enzyme Microb Technol, 2018 Apr;111:21-28.
    PMID: 29421033 DOI: 10.1016/j.enzmictec.2017.12.009
    Oil palm trunk (OPT) is one of the most promising lignocellulosic bioresources. To develop effective biodegradation, thermophilic, anaerobic microorganisms were screened from bovine manure compost using fibrillated OPT (f-OPT) pretreated by wet disk milling as the substrate. One thermophilic, anaerobic bacterium, strain CL-2, whose 16S rDNA gene has 98.6% sequence identity with that of Caldicoprobacter faecale DSM 20678T, exhibited high degradation activity (32.7% reduction in total dry solids of f-OPT). Strain CL-2 did not use cellulose as a carbon source, but used hemicelluloses such as xylan, arabinoxylan, starch and pectin at 70 °C. Phylogenetic and morphologic analyses and the polysaccharide use suggest that CL-2 may be classified as a novel species of Caldicoprobacter, named Caldicoprobacter sp. CL-2. To characterize enzymatic activities of CL-2, extracellular enzymes were prepared from culture broth using beechwood xylan as the carbon source. The extracellular enzymes showed high xylanase activity, but low cellulase activity, suggesting that f-OPT degradation may depend on xylanase activity. To understand the xylanase system of CL-2, a major xylanase was cloned and characterized. The xylanase (CalXyn11A) had a modular structure consisting of a glycoside hydrolase (GH) family-11 domain and a family 36 carbohydrate-binding module. CalXyn11A did not show f-OPT degradation activity, but a strong synergistic effect was observed when CalXyn11A was added to the extracellular enzyme preparation. These results indicate that, rather than working alone, CalXyn11A has an important role in enhancing total lignocellulose degradation activity by cooperation with other GHs.
Related Terms
Filters
Contact Us

Please provide feedback to Administrator (afdal@afpm.org.my)

External Links