Displaying all 20 publications

Abstract:
Sort:
  1. Fulltext Developing the cost for uncomplicated acute ST Elevated Myocardial Infarction (STEMI primary percutaneous coronary intervention) using step down and activity based costing at UKMMC
    Aniza, I., Syafrawati, Saperi, S., Zafar, M., Amrizal, M.N., Ika Fazura, M.N.
    Malaysian Journal of Community Health, 2011;17(1):26-31.
    MyJurnal
    Background: Cardiovascular disease is the number one cause of death globally and is projected to remain the leading cause of death. If the trend is allowed to continue, by 2015 an estimated 20 million people will die from cardiovascular disease (mainly because of myocardial infarction and strokes). The number of cardiovascular disease cases in Malaysia has increased to 14% in five years from 96,000 cases in 1995 to 110,000 cases in 2000.

    Methods: The cost to treat patients admitted to Universiti Kebangsaan Malaysia Medical Center (UKMMC) Malaysia, diagnosed with Acute Uncomplicated ST Elevated Myocardial Infarction (STEMI) was calculated by using two different methodologies, namely step down costing methodology and activity based costing using clinical pathway.

    Results: Cost for each stay per day at the cardiology ward using the step down methodology is RM596.42. The treatment cost is estimated from RM1, 789.26 to RM 4,771.36. The average cost per episode for STEMI care with the average length of stay for 5.6 days is RM3, 340(SD ±596.42. The cost of coronary PCI procedure in step costing is RM 13,950.00. Hence, the total cost incurs for STEMI with PCI is RM 17,290.00(SD ±596.42) by using step down method. (an average cost per episode is RM3,340, plus the cost of coronary procedure of RM 13,950.00 . However by using the ABC the cost of STEMI (PCI) with an average length of stay for 5.6 days is RM 20,431.39. The study showed the ABC method was higher by 15.3% than the step down costing.

    Conclusion: The cost in managing STEMI (PCI) with the average length of stay of 5.6 days was calculated by using two different methodologies, namely step down costing methodology and activity based costing. Cost of treatment calculated by using activity based costing are higher because all resources used are incorporated in detail. The ABC method was higher by 15.3% than the step down costing. The difference is within 80-20 rules and the biggest percentage of cost in both methodsis procedure or PCI cost.
  2. Fulltext Risk Assessment of Ambient Air Pollutants and Health Impact around Fuel Stations in Urban Cities of KSA
    Zafar M, H Zaidi ST, Husain SS, Bukhari NM
    Int J Prev Med, 2021;12:91.
    PMID: 34584657 DOI: 10.4103/ijpvm.IJPVM_331_19
    Background: In Saudi Arabia, fuel dispensing facilities commonly present around the residential places, educational institutions, and various health care facilities. Fuel pollutants such as benzene, toluene, and xylenes (BTX) and its alkyl derivatives are harmful to human health because of their toxic, mutagenic, or carcinogenic properties. The aim of this study was to determine the BTX concentration levels of common pollutants in and around fuel stations and their harmful health effects in the urban cites of KSA.

    Methods: Forty fuel dispensing facilities were randomly selected on the basis of three different areas: residential, traffic intersection, and petrol pump locations (refueling stations). Portable ambient analyzer was used for measuring BTX concentration. t-test was applied to determine the difference between these different areas.

    Results: All mean concentration values of pollutants such as BTX around residential, traffic intersection, and fuel stations are exceeding the limits of air quality standards values (P < 0.01). The mean levels of benzene are 10.3 and 11.07 ppm in Dammam and Khobar, respectively, and they exceed the reference level of 0.5 ppm. Hazard quotient was more than >1, which shows that carcinogenic probability has increased those who were living and working near fuel stations.

    Conclusions: The results found that the high concentration of pollutants (BTX) is in the environment around fuel stations. The environmental contamination associated with BTX in petrol fuel stations impulses the necessity of preventive programs to reduce the further air quality deterioration and reduce the harmful health effects.

  3. Ethnobotanical uses of medicinal plants for respiratory disorders among the inhabitants of Gallies - Abbottabad, Northern Pakistan
    Kayani S, Ahmad M, Zafar M, Sultana S, Khan MP, Ashraf MA, et al.
    J Ethnopharmacol, 2014 Oct 28;156:47-60.
    PMID: 25153021 DOI: 10.1016/j.jep.2014.08.005
    Rich accessibility of medicinal plants in the study area provides low cost health care for respiratory disorders to local communities. This first report survey was commenced with an aim to document ethnic knowledge regarding the use of folk herbal medicine for respiratory diseases among the local communities of Gallies Abbottabad, Northern Pakistan using quantitative ethnobotanical approaches.
  4. Spatial distribution of radioisotope concentrations in the offshore water and sediment of the Bay of Bengal (Indian Ocean), Bangladesh
    Bhuiyan MK, Siddique MA, Zafar M, Mustafa Kamal AH
    Isotopes Environ Health Stud, 2014;50(1):134-41.
    PMID: 24090093 DOI: 10.1080/10256016.2013.830613
    Concentrations of natural and fall-out radionuclides in the offshore seawater and sediment from some parts of the Bay of Bengal, Bangladesh, were determined using a coaxial germanium detector. The average activities of (238)U, (232)Th, (40)K and (137)Cs were recorded as 31.2±5.8, 51.9±9.4, 686.4±170.5 and 0.5±0.6 Bq kg(-1) dry weight, respectively, for sediment, and 4.8±1.2, 5.4±1.2 and 39.1±8.6 Bq L(-1) for (238)U, (232)Th and (40)K, respectively, in seawater. The concentration of (137)Cs in seawater was below the detection limit. The concentration of sediment (238)U was found to be positively correlated with (232)Th ([Formula: see text], p<0.05) and (40)K (r=0.96, p<0.01), while (232)Th was positively correlated with (40)K (r=0.91, p<0.05). In sediment, the concentration of (238)U was negatively correlated (r=-0.86, p<0.05) with sea depth. In the seawater sample, the only significant relationship found was between concentration of (232)Th and water depth (r=-0.86, p<0.05). One-factor analysis of variance (ANOVA) showed that the level of radioisotope concentrations of seawater and sediment was highly significant for (238)U (F=122, df=11, p=0.01), (232)Th (F=143, df=11, p=0.01) and (40)K (F=86, df=11, p=0.01). The results showed that the level of radioactivity decreased from coast to open sea. Imminent threat due to radioactivity was not observed in these parts of the Bay of Bengal.
  5. Production of high quality biodiesel from novel non-edible Raphnus raphanistrum L. seed oil using copper modified montmorillonite clay catalyst
    Munir M, Ahmad M, Rehan M, Saeed M, Lam SS, Nizami AS, et al.
    Environ Res, 2021 02;193:110398.
    PMID: 33127396 DOI: 10.1016/j.envres.2020.110398
    This study focused on producing high quality and yield of biodiesel from novel non-edible seed oil of abundantly available wild Raphnus raphanistrum L. using an efficient, recyclable and eco-friendly copper modified montmorillonite (MMT) clay catalyst. The maximum biodiesel yield of 83% was obtained by base catalyzed transesterification process under optimum operating conditions of methanol to oil ratio of 15:1, reaction temperature of 150 °C, reaction time of 5 h and catalyst loading of 3.5%. The synthesized catalyst and biodiesel were characterized for their structural features and chemical compositions using various state-of-the-art techniques, including x-ray diffraction, scanning electron microscopy, energy dispersive x-ray spectroscopy, Fourier transform infrared spectroscopy, nuclear magnetic resonance (1H, 13C) and gas chromatography-mass spectroscopy. The fuel properties of the biodiesel were estimated including kinematic viscosity (4.36 cSt), density (0.8312 kg/L), flash point (72 °C), acid value (0.172 mgKOH/g) and sulphur content (0.0002 wt.%). These properties were compared and found in good agreement with the International Biodiesel Standards of American (ASTM-951, 6751), European Committee (EN-14214) and China GB/T 20828 (2007). The catalyst was re-used in five consecutive transesterification reactions without losing much catalytic efficiency. Overall, non-edible Raphnus raphanistrum L.. seed oil and Cu doped MMT clay catalyst appeared to be highly active, stable, and cheap contenders for future biofuel industry. However, detailed life cycle assessment (LCA) studies of Raphnus raphanistrum L. seed oil biodiesel are highly recommended to assess the technical, ecological, social and economic challenges.
  6. Fulltext Understanding Hyaluronan Receptor (CD44) Interaction, HA-CD44 Activated Potential Targets in Cancer Therapeutics
    Chaudhry GE, Akim A, Naveed Zafar M, Safdar N, Sung YY, Muhammad TST
    Adv Pharm Bull, 2021 May;11(3):426-438.
    PMID: 34513617 DOI: 10.34172/apb.2021.050
    Cancer is a complex mechanism involving a series of cellular events. The glycoproteins such as hyaluronan (HA) are a significant element of extracellular matrix (ECM), involve in the onset of cancer developmental process. The pivotal roles of HA in cancer progression depend on dysregulated expression in various cancer. HA, also gain attention due to consideration as a primary ligand of CD44 receptor. The CD44, complex transmembrane receptor protein, due to alternative splicing in the transcription process, various CD44 isoforms predominantly exist. The overexpression of distinct CD44 isoforms (CD44v) standard (CD44s) depends on the tumour type and stage. The receptor proteins, CD44 engage in a variety of biological processes, including cell growth, apoptosis, migration, and angiogenesis. HA-CD44 interaction trigger survival pathways that result in cell proliferation, invasion ultimately complex metastasis. The interaction and binding of ligand-receptor HA-CD44 regulate the downstream cytoskeleton pathways involve in cell survival or cell death. Thus, targeting HA, CD44 (variant and standard) isoform, and HA-CD44 binding consider as an attractive and useful approach towards cancer therapeutics. The use of various inhibitors of HA, hyaluronidases (HYALs), and utilizing targeted Nano-delivery of anticancer agents and antibodies against CD44, peptides gives promising results in vitro and in vivo. However, they are in clinical trials with favourable and unfavourable outcomes, which reflects the need for various modifications in targeting agents and a better understanding of potential targets in tumour progression pathways.
  7. Identification of green energy ranunculaceous flora of district Chitral, Northern Pakistan using pollen features through scanning electron microscopy
    Ahmad M, Zafar M, Sultana S, Ahmad M, Abbas Q, Ayoub M, et al.
    Microsc Res Tech, 2018 Sep;81(9):1004-1016.
    PMID: 30303585 DOI: 10.1002/jemt.23066
    Pollen micro-morphological features have proven to be helpful for the plant taxonomists in the identification and classification of plants. The utilization of this plantmayhelpfulin the areas of lignocellulosic conversion to biofuels and diversify application toward biomass. The current study was planned with the aim to evaluate the pollen features of complex Ranunculaceous flora of District Chitral, Northern Pakistan using both scanning electron microscopy (SEM) and Light Microscope (LM) for their taxonomic importance. Pollens of 18 Ranunculaceous species belonging to 6 genera were collected from different localities of the research area. SEM and LM were used to examine both qualitative and quantitative micro-morphological features. Sculptring of the sexine include; Scabrate, psilate, echinate, verrucate, perforate gemmate, and reticulate and so forth. Shape of the pollens was sub-spheroidal, spheroidal, prolate, subprolate and oblate and so forth. Type of pollen was ranged from mono to tricolpate and tricolporate. Quantitative characters include length/width of the pollen, colpus, exine thickness, and P/E ratio. Based on these micro-morphological features a taxonomic key was prepared for the fast and correct identification. RESEARCH HIGHLIGHT: Study of the pollen micro-morphological features of Ranunculaceous species by SEM and LM. Analysing both qualitative and quantitative characters of the pollens. Preparation of taxonomic key based on micro-morphological features for the correct and fast identification.
  8. Role of trees in climate change and their authentication through scanning electron microscopy
    Arshad S, Ahmad M, Saboor A, Ibrahim FH, Mustafa MRU, Zafar M, et al.
    Microsc Res Tech, 2019 Feb;82(2):92-100.
    PMID: 30511479 DOI: 10.1002/jemt.23106
    Climate change is the most realistic theory of this era. Sudden and drastic changes are happening on the earth and the survival of mankind is becoming questionable in the future. The plants play the key role in controlling the climate change. The study emphasizes on role of trees in the cop up or damaging the climate of this earth, whether they are medicinal trees or economically important trees. Due to the overgrazing and intense deforestation the climate is being affected hazardously. The global warming phenomenon is occurring due to the less availability of trees and more carbon dioxide in the atmosphere. In total 20 plants were collected from across the Pakistan on the basis of their abundance and their key roles. Out of which seeds of eight plants were scanned through scanning electron microscope for correct authentication and importance of these medicinally important trees in mitigating the climate change. RESEARCH HIGHLIGHTS: The role of forest sector in the climate's change mitigation. Medicinally and economically important tree species across Pakistan. By using SEM, Ultra seed sculpturing features as an authentication tool. To formulate some policies to stop or control deforestation.
  9. Fulltext Report: antioxidant and nutraceutical value of wild medicinal Rubus berries
    Ahmad M, Masood S, Sultana S, Hadda TB, Bader A, Zafar M
    Pak J Pharm Sci, 2015 Jan;28(1):241-7.
    PMID: 25553701
    Nutritional quality and antioxidant capacity of three edible wild berries (Rubus ellipticus Smith, Rubus niveus Thunb, Rubus ulmifolius L.) from Lesser Himalayan Range (LHR) were evaluated. Their edible portion was assayed for moisture, fats, ash, carbohydrates, proteins, fibers, essential minerals (Ca, P, Mg, K, Na, Cl, S, Mn, Zn, Fe, Cu, Se, Co, Ni) and DPPH free radical scavenging activity was applied to determine the antioxidant potential. The fruit of Rubus ulmifolius L. (blackberry) possessed the highest values of energy (403.29 Kcal), total protein (6.56g/100 g), Nitrogen (N) content (1500mg/100g), K (860.17mg/100g), Ca (620.56mg/100g), Zn (17.509mg/100g) and the strongest antioxidant activity (98.89% inhibition). While the raspberries (Rubus ellipticus Smith, Rubus niveus Thunb.) exhibited more significant contents of dietary fiber (5.90g/100g), carbohydrates (86.4 g/100 g) and Fe (4.249mg/100g). Significant variation was observed among the tested samples in all the investigated features. The combination of bio elements and active antioxidants clearly showed the applicability of these berries as a nutraceutical supplement.
  10. Fulltext Vitex Rotundifolia Fractions Induced Apoptosis in Human Breast Cancer T-47D Cell Line via Activation of Extrinsic and Intrinsic Pathway
    Chaudhry GE, Jan R, Naveed Zafar M, Mohammad H, Muhammad TST
    Asian Pac J Cancer Prev, 2019 Dec 01;20(12):3555-3562.
    PMID: 31870094 DOI: 10.31557/APJCP.2019.20.12.3555
    OBJECTIVE: Breast cancer is the most frequently diagnosed cancer worldwide. The main objective of the present study was to evaluate the cytotoxic effects and mechanism of cell death induced by the extract and fractions of Vitex rotundifolia (leaves) in breast cancer cell line, T-47D.

    METHODS: The cytotoxicity activity was measured using MTS assay. The mode of cell death was analysed by early (phosphatidylserine externalization) and late apoptosis (DNA fragmentation). The caspases 8, 9, 3/7 and apoptotic proteins bax, bcl-2 study were done by western blot and ELISA method.

    RESULTS: The methanol extract was found to inhibit 50% growth of T-47D cells at the concentration of 79.43µg/ml respectively after 72hr. From seven fractions, fraction F1, F2 and F3 produced cytotoxicity effects in T-47D cell line with IC50 (72hr) < 30µg/ml. The results obtained by Annexin V/PI apoptosis detection assay and TUNEL assay suggest that active fractions of  Vitex rotundifolia induced early and late apoptosis (DNA fragmentation) in T-47D cell line. Moreover, western blot analysis and Caspase GloTM luminescent assay demonstrated that fractions F2 and F3 triggered apoptotic cell death via activation of caspases -8, -9 and -3/7 and up-regulation of  Bax and down-regulation of Bcl-2 protein.  Furthermore, chemical profiling confirms the presence of potential metabolites (vitexicarpin) in fractions of Vitex rotundifolia.

    CONCLUSION: Thus, the present study suggests the remarkable potential of active metabolites in fractions of Vitex rotundifolia as future cancer therapeutic agent for the treatment of breast cancer.
    .

  11. Numerical investigation of treated brain glioma model using a two-stage successive over-relaxation method
    Hussain A, Muthuvalu MS, Faye I, Zafar M, Inc M, Afzal F, et al.
    Comput Biol Med, 2023 Feb;153:106429.
    PMID: 36587570 DOI: 10.1016/j.compbiomed.2022.106429
    A brain tumor is a dynamic system in which cells develop rapidly and abnormally, as is the case with most cancers. Cancer develops in the brain or inside the skull when aberrant and odd cells proliferate in the brain. By depriving the healthy cells of leisure, nutrition, and oxygen, these aberrant cells eventually cause the healthy cells to perish. This article investigated the development of glioma cells in treating brain tumors. Mathematically, reaction-diffusion models have been developed for brain glioma growth to quantify the diffusion and proliferation of the tumor cells within brain tissues. This study presents the formulation the two-stage successive over-relaxation (TSSOR) algorithm based on the finite difference approximation for solving the treated brain glioma model to predict glioma cells in treating the brain tumor. Also, the performance of TSSOR method is compared to the Gauss-Seidel (GS) and two-stage Gauss-Seidel (TSGS) methods in terms of the number of iterations, the amount of time it takes to process the data, and the rate at which glioma cells grow the fastest. The implementation of the TSSOR, TSGS, and GS methods predicts the growth of tumor cells under the treatment protocol. The results show that the number of glioma cells decreased initially and then increased gradually by the next day. The computational complexity analysis is also used and concludes that the TSSOR method is faster compared to the TSGS and GS methods. According to the results of the treated glioma development model, the TSSOR approach reduced the number of iterations by between 8.0 and 71.95%. In terms of computational time, the TSSOR approach is around 1.18-76.34% faster than the TSGS and GS methods.
  12. Retraction Note to: Estimation of Anticipated Performance Index and Air Pollution Tolerance Index and of vegetation around the marble industrial areas of Potwar region: bioindicators of plant pollution response
    Noor MJ, Sultana S, Fatima S, Ahmad M, Zafar M, Sarfraz M, et al.
    Environ Geochem Health, 2017 06;39(3):705.
    PMID: 26932557 DOI: 10.1007/s10653-016-9812-6
  13. Ethnomedicinal uses of plants for the treatment of snake and scorpion bite in Northern Pakistan
    Butt MA, Ahmad M, Fatima A, Sultana S, Zafar M, Yaseen G, et al.
    J Ethnopharmacol, 2015 Jun 20;168:164-81.
    PMID: 25818693 DOI: 10.1016/j.jep.2015.03.045
    Medicinal plants represent one of the most accessible resources available for snake and scorpion bite among the rural communities of Northern Pakistan. This first ethno-botanical study aimed to document the indigenous knowledge and practices of using plants for snake and scorpion bite disorders in Northern Pakistan.
  14. Phyllosilicate derived catalysts for efficient conversion of lignocellulosic derived biomass to biodiesel: A review
    Nawaz S, Ahmad M, Asif S, Klemeš JJ, Mubashir M, Munir M, et al.
    Bioresour Technol, 2022 Jan;343:126068.
    PMID: 34626762 DOI: 10.1016/j.biortech.2021.126068
    The efforts have been made to review phyllosilicate derived (clay-based) heterogeneous catalysts for biodiesel production via lignocellulose derived feedstocks. These catalysts have many practical and potential applications in green catalysis. Phyllosilicate derived heterogeneous catalysts (modified via any of these approaches like acid activated clays, ion exchanged clays and layered double hydroxides) exhibits excellent catalytic activity for producing cost effective and high yield biodiesel. The combination of different protocols (intercalated catalysts, ion exchanged catalysts, acidic activated clay catalysts, clay-supported catalysts, composites and hybrids, pillared interlayer clay catalysts, and hierarchically structured catalysts) was implemented so as to achieve the synergetic effects (acidic-basic) in resultant material (catalyst) for efficient conversion of lignocellulose derived feedstock (non-edible oils) to biodiesel. Utilisation of these Phyllosilicate derived catalysts will pave path for future researchers to investigate the cost-effective, accessible and improved approaches in synthesising novel catalysts that could be used for converting lignocellulosic biomass to eco-friendly biodiesel.
  15. Fulltext The Impact of Cavities in Different Thermal Applications of Nanofluids: A Review
    Zafar M, Sakidin H, Sheremet M, Dzulkarnain I, Nazar RM, Hussain A, et al.
    Nanomaterials (Basel), 2023 Mar 22;13(6).
    PMID: 36986025 DOI: 10.3390/nano13061131
    Nanofluids and nanotechnology are very important in enhancing heat transfer due to the thermal conductivity of their nanoparticles, which play a vital role in heat transfer applications. Researchers have used cavities filled with nanofluids for two decades to increase the heat-transfer rate. This review also highlights a variety of theoretical and experimentally measured cavities by exploring the following parameters: the significance of cavities in nanofluids, the effects of nanoparticle concentration and nanoparticle material, the influence of the inclination angle of cavities, heater and cooler effects, and magnetic field effects in cavities. The different shapes of the cavities have several advantages in multiple applications, e.g., L-shaped cavities used in the cooling systems of nuclear and chemical reactors and electronic components. Open cavities such as ellipsoidal, triangular, trapezoidal, and hexagonal are applied in electronic equipment cooling, building heating and cooling, and automotive applications. Appropriate cavity design conserves energy and produces attractive heat-transfer rates. Circular microchannel heat exchangers perform best. Despite the high performance of circular cavities in micro heat exchangers, square cavities have more applications. The use of nanofluids has been found to improve thermal performance in all the cavities studied. According to the experimental data, nanofluid use has been proven to be a dependable solution for enhancing thermal efficiency. To improve performance, it is suggested that research focus on different shapes of nanoparticles less than 10 nm with the same design of the cavities in microchannel heat exchangers and solar collectors.
  16. Fulltext The Impact of 3D Prism Cavity for Enhanced Oil Recovery Using Different Nanomaterials
    Zafar M, Sakidin H, Dzulkarnain I, Hussain A, Sheremet M, Nazar R, et al.
    Materials (Basel), 2023 May 27;16(11).
    PMID: 37297145 DOI: 10.3390/ma16114011
    Enhanced oil recovery (EOR) has been offered as an alternative to declining crude oil production. EOR using nanotechnology is one of the most innovative trends in the petroleum industry. In order to determine the maximum oil recovery, the effect of a 3D rectangular prism shape is numerically investigated in this study. Using ANSYS Fluent software(2022R1), we develop a two-phase mathematical model based on 3D geometry. This research examines the following parameters: flow rate Q = 0.01-0.05 mL/min, volume fractions = 0.01-0.04%, and the effect of nanomaterials on relative permeability. The result of the model is verified with published studies. In this study, the finite volume method is used to simulate the problem, and we run simulations at different flow rates while keeping other variables constant. The findings show that the nanomaterials have an important effect on water and oil permeability, increasing oil mobility and lowering IFT, which increases the recovery process. Additionally, it has been noted that a reduction in the flow rate improves oil recovery. Maximum oil recovery was attained at a 0.05 mL/min flow rate. Based on the findings, it is also demonstrated that SiO2 provides better oil recovery compared to Al2O3. When the volume fraction concentration increases, oil recovery ultimately increases.
  17. Fulltext A numerical investigation of mathematical modelling in 3D hexagonal porous prism on oil recovery using nanoflooding
    Zafar M, Sakidin H, Sheremet M, Dzulkarnain I, Nazar R, Al-Yaari A, et al.
    Heliyon, 2023 Aug;9(8):e18676.
    PMID: 37554841 DOI: 10.1016/j.heliyon.2023.e18676
    The use of nanomaterials as a means of recovering heavy and light oil from petroleum reservoirs has increased over the preceding twenty years. Most researchers have found that injecting a nanoparticle dispersion (nanofluids) has led to good results and increased the amount of oil that can be recovered. In this research, we aim to imitate the three-dimensional hexagonal prism in the existence of SiO2 and Al2O3 nanoparticles for better oil recovery. Porosity (0.1≤φ≤0.4), mass flow rate (0.05mL/min≤Q≤0.05ml/min), nanoparticle concentration (0.01≤ψ≤0.04), and the effect of relative permeability (kr) on oil and water saturation in the presence of gravity under different time durations are all investigated. The result obtained for the model is verified with existing experimental data. The results indicated that the infulence of nanoparticle volume fraction (VF) is significant in enhancing the oil recovery rate. It is also observed that at low porosity values the oil recovery is maximum. The maximum oil recovery is attained at low values of mass flow rate in the 3D hexagonal prism in the presence of silicon and aluminium nanoparticles It is also observed that the use of SiO2 gives a better oil recovery rate than Al2O3. It is also observed that maximum oil recovery is obtained at 99% at a flow rate of 0.05 mL/min in the presence of silicon injection.
  18. Fourth-Generation Antibiotic Gatifloxacin Encapsulated by Microemulsions: Structural and Probing Dynamics
    Nazar MF, Yasir Siddique M, Saleem MA, Zafar M, Nawaz F, Ashfaq M, et al.
    Langmuir, 2018 Sep 11;34(36):10603-10612.
    PMID: 30109940 DOI: 10.1021/acs.langmuir.8b01775
    To overcome the increased disease rate, utilization of the versatile broad spectrum antibiotic drugs in controlled drug-delivery systems has been a challenging and complex consignment. However, with the development of microemulsion (μE)-based formulations, drugs can be effectively encapsulated and transferred to the target source. Herein, two biocompatible oil-in-water (o/w) μE formulations comprising clove oil/Tween 20/ethylene glycol/water (formulation A) and clove oil/Tween 20/1-butanol/water (formulation B) were developed for encapsulating the gatifloxacin (GTF), a fourth-generation antibiotic. The pseudoternary phase diagrams were mapped at a constant surfactant/co-surfactant (1:1) ratio to bound the existence of a monophasic isotropic region for as-formulated μEs. Multiple complementary characterization techniques, namely, conductivity (σ), viscosity (η), and optical microscopy analyses, were used to study the gradual changes that occurred in the microstructure of the as-formulated μEs, indicating the presence of a percolation transformation to a bicontinuous permeate flow. GTF showed good solubility, 3.2 wt % at pH 6.2 and 4.0 wt % at pH 6.8, in optimum μE of formulation A and formulation B, respectively. Each loaded μE formulation showed long-term stability over 8 months of storage. Moreover, no observable aggregation of GTF was found, as revealed by scanning transmission electron microscopy and peak-to-peak correlation of IR analysis, indicating the stability of GTF inside the formulation. The average particle size of each μE, measured by dynamic light scattering, increased upon loading GTF, intending the accretion of drug in the interfacial layers of microdomains. Likewise, fluorescence probing sense an interfacial hydrophobic environment to GTF molecules in any of the examined formulations, which may be of significant interest for understanding the kinetics of drug release.
  19. Taxonomic significance of cypsela morphology in tribe Cichoreae (Asteraceae) using light microscopy and scanning electron microscopy
    Ayaz S, Ahmad M, Zafar M, Ali MI, Sultana S, Mustafa MRU, et al.
    Microsc Res Tech, 2020 Mar;83(3):239-248.
    PMID: 31713962 DOI: 10.1002/jemt.23407
    The current study deals with the detailed morphology investigation of eight Cypsela species belonging to tribe Cichoreae. The different Cypsela types were described, explained, compared, and their taxonomic significance is discussed in detail. Light microscopy (LM) and scanning electron microscopy (SEM) have been used to highlight quantitative and qualitative characters of underestudied species. Cypsela exhibit great diversity in macro and micromorphological features such as shape, color, length, width, anticlinal and periclinal wall patterns, surface patterns, epicuticular projections. Majority of Cypsela species were brownish in color and their size ranges from 2.16 to 3.98 mm in length and 1.16 to 0.82 mm in breadth. A great diversity in Cypsela shapes like oblanceolate to obovate, obovoid to cylindrical, obvate, narrowly lanceolate were observed. Most of the platelets having epicuticular projections were observed. The surface pattern on the cypsela surface varied from rugose papillate, verrucose papillate, and striated. On the basis of considerable variations observed, the present study can assist as useful constraints at various taxonomic levels. The aim of the present study is to provide a comprehensive description of the Cypsela morphology and to determine the extent to which these micro morphological data can be used as a taxonomic character to delineate various taxa belonging to the tribe Cichoreae.
  20. Biodiesel synthesis from Prunus bokhariensis non-edible seed oil by using green silver oxide nanocatalyst
    Dawood S, Ahmad M, Zafar M, Asif S, Klemeš JJ, Bokhari A, et al.
    Chemosphere, 2022 Mar;291(Pt 2):132780.
    PMID: 34767846 DOI: 10.1016/j.chemosphere.2021.132780
    The present work investigates the proficiency of green silver oxide nanocatalyst synthesised from Monotheca buxifolia (Falc.) Dcne. leaves extract, and their application for biodiesel synthesis from novel Prunus bokhariensis seed oil (non-edible). The seed oil content of 55% and FFA content of 0.80 mg KOH/g were reported. Several analytical tools (EDX, FT-IR, SEM and XRD) were used to characterise the Ag2O nanocatalyst. Maximum (89%) FAME yield of the PBSOB (Prunus bokhariensis seed oil biodiesel) was achieved at ambient transesterification conditions i.e. 3.5 wt% nanocatalyst loading, 2.5 h reaction time, 130 °C of reaction temperature and 12:1 alcohol to oil ratio. The synthesised PBSOB was additionally characterised by analytical methods like, GC-MS and FT-IR. The different aspects of fuel were identified i.e. flash point (84 °C), kinematic viscosity (4.01 cSt @ 40 °C), sulphur content (0.0003 wt %), density (0.853 kg/L) and acid number (0.167 mg KOH/g). All the above properties were verified and agreed well with biodiesel international standards (European Union (14214), China GB/T (20828) and ASTM (6751, 951). In general, Prunus bokhariensis seed oil and Ag2O nanocatalyst seem to be remarkably active, cheap and stable candidates for the biodiesel industry in future.
Related Terms
    Try searching for something
Filters
Contact Us

Please provide feedback to Administrator (afdal@afpm.org.my)

External Links