Displaying publications 1 - 20 of 83 in total

Abstract:
Sort:
  1. Rahman A, Islam MT, Singh MJ, Kibria S, Akhtaruzzaman M
    Sci Rep, 2016 12 23;6:38906.
    PMID: 28008923 DOI: 10.1038/srep38906
    In this paper, we report a compact and ultra-wide band antenna on a flexible substrate using the 5-(4-(perfluorohexyl)phenyl)thiophene-2-carbaldehyde compound for microwave imaging. In contrast to other microwave based imaging systems, such as an array of 16 antennas, we proposed a bi-static radar based imaging system consisting of two omnidirectional antennas, which reduces complexity and the overall dimension. The proposed compact antennas are 20 × 14 mm2 and designed for operating at frequencies from 4 to 6 GHz. To allow for implantation into a bra, the electromagnetic performances of the antennas must be considered in bending conditions. In comparison with the recently reported flexible antennas, we demonstrated both electromagnetic performance and imaging reconstruction for bending conditions. For the proof of concept, the electromagnetic performances both at flat and bending conditions have been verified using a homogeneous multilayer model of the human breast phantom. Our results demonstrate that the antenna, even at bending conditions, exhibits an excellent omni-directional radiation pattern with an average efficiency above 70% and average gain above 1 dBi, within the operational frequency band. The comprehensive aim of the realized antenna is to design a biodegradable and wearable antenna-based bra for early breast cancer detection in the future.
    Matched MeSH terms: Clothing*
  2. Teo CH, Amir Hamzah SP
    Malays J Pathol, 2014 Apr;36(1):69.
    PMID: 24763240
    Matched MeSH terms: Clothing*
  3. Hoong-Pin Lee, Abdullah Zawawi Awang, Wahid Omar
    MyJurnal
    High strength concrete (HSC) has lower ductility, but higher in strength compared to normal strength concretes. The strength and ductility of HSC can be improved by applying external confinement, such as steel strapping tensioning technique (SSTT). However, SSTT was literately reported effective in confining circular specimens, but the effectiveness of SSTT on square cross section specimens are yet well investigated. This study focuses on HSC square cross section specimens with different corner ratio, which were right angle and rounded corner. In addition, the effect of different number of layer of steel straps confining around the specimens under optimum lateral pre-tensioning stress also been investigated. The number of layers was fixed to two layers and four layers. Fifteen HSC specimens with dimension of 88 mm x 88 mm x 200 mm, which consist of three unconfined specimens, six right angle specimens, and six rounded corner specimens were prepared and tested monotonically to failure. The experimental results show that the strength and ductility of HSC improved significantly by using rounded corner confined specimens and higher number of layer of confinements. This is due to more uniform confining pressure was exerted on entire surface of rounded corner confined specimens. The strength and ductility of the specimens can be improved up to 53.7% and 207.5% respectively.
    Matched MeSH terms: Clothing
  4. Mohd Agos Salim Nasir, Ahmad Izani Md Ismail
    Sains Malaysiana, 2013;42:341-346.
    A high-order uniform Cartesian grid compact finite difference scheme for the Goursat problem is developed. The basic idea of high-order compact schemes is to find the compact approximations to the derivatives terms by differentiating centrally the governing equations. Our compact scheme will approximate the derivative terms by involving the higher terms and reducing the number of grid points. The compact finite difference scheme is given for general form of the Goursat problem in uniform domain and illustrates the performance by applying a linear problem. Numerical experiments have been conducted with the new scheme and encouraging results have been obtained. In this paper we present the compact finite difference scheme for the Goursat problem. With the aid of computational software the scheme was programmed for determining the relative errors of linear Goursat problem.
    Matched MeSH terms: Clothing
  5. Fazlian Aman, Anuar Ishak, Pop J
    Sains Malaysiana, 2011;40:1369-1374.
    The heat transfer behaviour of a viscous fluid over a stretching/shrinking sheet driven by a uniform shear in the far field with a convective surface boundary condition is studied. The boundary layer equations governing the flow are reduced to ordinary differential equations using a similarity transformation. Using a numerical technique, these equations are then solved to obtain the temperature distributions and the heat transfer rate at the surface for various values of Prandtl number, stretching/shrinking parameter and convective parameter. Dual solutions are found to exist for the shrinking case, whereas for the stretching case, the solution is unique.
    Matched MeSH terms: Clothing
  6. Teng YT, Lye HO
    Sains Malaysiana, 2014;43:145-150.
    Polarization in antiferroelectric liquid crystals has two origins: The piezoelectric polarization which is of chiral origin and the flexoelectric polarization which originates in different orientation of tilts in neighboring layers. The flexoelectric polarization is perpendicular to the tilt direction only if the structure is uniformly helicoidally modulated. In structures like SmC*F11andSmC;12 the flexoelectric contribution might be significant and it can be non-parallel to the piezoelectric component. Hence it may deviates the direction of polarization from the perpendicular direction significantly. The angle formed by the polarization and the tilt is therefore general and as such the basic characteristic of the SmCG* phase can be recognized. It seems that this aspect was completely overlooked in the past. In this contribution we analyze the dependence of the polarization direction on the phase structures and on the values of piezoelectric and flexoelectric coefficients in the discrete phenomenological model.
    Matched MeSH terms: Clothing
  7. Nordin S, Aidura M, Razak S, Faisham W
    Malays J Med Sci, 2002 Jan;9(1):34-40.
    PMID: 22969316
    Despite common occurrence, congenital talipes equinovarus (clubfoot) is still a subject of controversy. It poses a significant problem with its unpredictable outcome, especially when the presentation for treatment is late. The true etiology remains unknown although many theories have been put forward. A standard management scheme is difficult as there is no uniformity in the pathoanatomy, classification and radiographic evaluation. These differ according to the age of the child and the severity of the condition. The paper discusses these controversies with an emphasis on the proposed etiologies and types of treatment performed.
    Matched MeSH terms: Clothing
  8. Teo CH, Pawita AH, Khairul O, Atiah Ayunni AG, Noor Hazfalinda H
    Malays J Pathol, 2013 Jun;35(1):77-85.
    PMID: 23817398 MyJurnal
    Post mortem changes are important in estimating post mortem interval (PMI). This project's aim was to study the effect of burial and type of clothing on rate of decomposition, which can contribute to estimating PMI for victims. 12 rabbits (Oryctolagus cuniculus) carcasses were separated into 3 groups: no clothing, light clothing and heavy clothing. Control subjects were placed on the ground surface while test subjects were buried at 30 cm depth graves. Soil samples prior and after decomposition were collected for soil pH and moisture analysis. Post mortem change was assessed using a Total Body Score system. The head, neck and limb regions were found to decay faster than the body trunk region. Mummifi cation occurred on body parts that were exposed directly to the atmosphere while adipocere formed on some buried subjects. Burial delayed decomposition due to lower insect activity and lower soil temperature. The soil layer also blocked the accessibility of majority of the arthropods, causing further delay in decomposition. Clothing enhanced decay for bodies on ground surface because it provided protection for maggots and retained moisture on tissues. However, clothing delayed decomposition in buried bodies because it physically separated the bodies from soil and arthropods. Higher sun exposure and repetitive exhumation showed acceleration of decomposition. The decomposition process increased soil pH and moisture percentage values. Soil pH initially increased until pH 8.0-8.4 followed by a slight decrease while soil moisture percentage changed inconsistently. Burial was significant in affecting post mortem change, F(1,11)=12.991, p<0.05 while type of clothing was not significant, F(2,9)=0.022, p=0.978 and combination of both type of clothing and burial factors were also not significant, F(2,3)=0.429, p=0.686. For validation, an accuracy of 83.33% was achieved based on soil pH and soil moisture percentage analysis.
    Matched MeSH terms: Clothing*
  9. Gouwanda D, Senanayake NA
    PMID: 22256153 DOI: 10.1109/IEMBS.2011.6091928
    Gait stability is primary in assessing individuals with high risk of falling, particularly the elderly. Custom made self-adjustable wireless gyroscope suit is used as a sensing device to quantify gait stability. A nonlinear time series analysis i.e. maximum Lyapunov exponent (λ*) was employed to estimate the short term and long term stability and it is closely related to the ability of human neuro-muscular control system in maintaining gait stability. Experimental analysis and tests validated the efficacy of this novel approach. The results achieved are comparable with the findings of multiple kinematic and dynamic parameters derived from optical motion capture system and force platform which are widely used as gold standard.
    Matched MeSH terms: Clothing*
  10. Tumin M, Raja Ariffin RN, Mohd Satar N, Abdullah N, Wan Md Adnan WA, Ismail AZ, et al.
    Ann. Transplant., 2015;20:206-10.
    PMID: 25865792 DOI: 10.12659/AOT.892707
    Malaysia, a country of Muslim majority, is suffering from a severe organ shortage due to the lack of donors. Mosques are the main gateways into the Muslim community. Hence, it is imperative to explore their role in facilitating organ donation.
    Matched MeSH terms: Clothing
  11. Zainuddin N, Saleh H, Hashim I, Roslan R
    Sains Malaysiana, 2016;45:315-321.
    Effects of radiation on free convection about a heated horizontal circular cylinder in the presence of heat generation is investigated numerically. The cylinder is fixed and immersed in a stationary fluid, in which the temperature is uniformly heated about the temperature of the surrounding fluid. The governing equations are transformed into dimensionless non-linear partial differential equations and solved by employing a finite difference method. An implicit finite difference scheme of Crank Nicolson method is used to analyze the results. This study determined the effects of radiation parameter, heat generation parameter, and the Prandtl number, on the temperature and velocity profiles. The results of the local heat transfer and skin-friction coefficient in the presence of radiation for some selected values of and are shown graphically.
    Matched MeSH terms: Clothing
  12. Rusmah, M.
    Ann Dent, 1995;2(1):-.
    MyJurnal
    The root canal walls of twenty -five deciduous molar teeth with exposed and necrotic pulps were examined using thescanning electronmicroscope. Immediately after extraction, all teeth were fixed in Kamosky's solution. The coronal portion of the tooth was sectioned at about 2mm above the enamel cemental junction.The mesial and distal roots were separat~d and either split in the mesio-distal or bucco-lingual direction. All specimens were prepared for SEM. Obsevations showed that all roots were infected with organisms consisting of cocciand short rods. Some of the coccihad penetrated the dentine layer. However, the distribution of organisms is. not uniform throughout thecanals. Bacterialinvasion ismostinthecoronal region and reduces towards the apical region: Accompanying bacterial invasion is root canal walls deterioration. The odontoblastic processes are the first to deteriorate followed by the predentine layer.
    Matched MeSH terms: Clothing
  13. Abdullah, Z., Halim, Z.I.A., Bakar, M.A.A., Idris, A.M.
    ASM Science Journal, 2009;3(1):39-44.
    MyJurnal
    3-Nitro-2-phenoxypyridine and 3-nitro-2-(4-methyl)phenoxypyridine were obtained when 2-chloro-3-nitropyridine was treated with phenol and p-cresol, respectively. Fluorescence studies were carried out in various solvents, in capped and uncapped conditions and for differing concentrations. Both 3-nitro-2-phenoxypyridine and 3-nitro-2-(4-methyl)phenoxypyridine were fluorescent compounds but 3-Nitro-2-(4-methyl)phenoxypyridine was more fluorescent than 3-nitro-2-phenoxypyridine in all the solvents used. The fluorescence intensity decreased with concentration and time.
    Matched MeSH terms: Clothing
  14. Wan, Ngeow Yen, Chin, Khaw Pei, Che Su Mt. Saad
    MyJurnal
    Reclaimed rubber from rejected natural rubber (NR) latex gloves (r-NRG) was evaluated as partial
    replacement for Standard Malaysian Rubber (SMR) 20 in producing microcellular rubber. In the study, the amount of reclaimed rubber varied from 20 pphr to 95 pphr for the purpose of cost reduction, environmental interest and as processing aids in reducing internal porosity, swells and to minimize shrinkage and air-trapped problems in producing microcellular rubber. A typical formulation in making microcellular rubber slab was developed and two-roll mill was used for compounding. The cure characteristics and mechanical properties, such as density, hardness, tensile strength, and elongation at break, were evaluated. Scorch time and cure rate index performed marginal decreased with increasing of r-NRG content. 95 pphr r-NRG blends showed a consequential drop in hardness. Both tensile properties and elongation at break decreased as the r-NRG content was increased.
    Matched MeSH terms: Clothing
  15. Makmor Tumin, Khaled Tafran, Nurul Huda Mohd Satar
    MyJurnal
    Most countries around the world have experienced a shortage in organs needed for transplantation. Organ donation performance is widely attributed to two important factors: the legislation and the role of the family. Thus, this literature review aims to examine the willingness of people for organ donation while highlighting the importance of having a presumed consent system.
    Matched MeSH terms: Clothing
  16. Malek, M.F., Mamat, M.H., Ismail, A.S., Mohamed, R., Salifairus, M.J., Khusaimi, Z., et al.
    Science Letters, 2016;11(2):36-40.
    MyJurnal
    We had successfully synthesised Mg-doped zinc oxide (MZO) and Cudoped zinc oxide (CZO) nanorod arrays (NRAs) on Al-doped ZnO (ZAO)-coated glass substrates using immersion method and investigated their structural properties. With the incorporation of the Mg dopant, the length and crystallinity of MZO NRAs is higher compared to that of the CZO NRAs. The average optical transmittance of MZO NRAs was slightly lower than that of the CZO NRAs over the visible wavelength region. With the incorporation of the Cu dopant, the morphology of the CZO sample was slightly different from that of the MZO NRAs. The CZO NRAs present granular with small sphere shape. On the other hand, the MZO NRAs exhibit a hexagonal shape structure with a flat-top facet. Rods with a diameter of 58.9-96.7 nm were uniformly grown on the ZAO-coated glass substrate. This paper presents the growth behaviors of the MZO and CZO NRAs.
    Matched MeSH terms: Clothing
  17. Nadia Sarina, M.F., Mohd Adzahan, N., Sobhi, B., Ab Karim, M.S., Karim, R.
    MyJurnal
    This study was conducted to improve the formulation of chili shrimp paste (CSP) based on sensory evaluation in terms of acidity, source of acid and coarseness of chili paste and to improve the production process of CSP. The effectiveness of dimethyl dicarbonate (DMDC) as a microbial reduction agent was also evaluated. To produce CSP with different coarseness, a milling machine was used. Two types of preference test were conducted, i.e. ranking and hedonic. The preferred pH level was 4.0, the best acid source was kalamansi juice, and the most preferred coarseness for chili paste was when milling plates with a gap of 120 µm was used. DMDC has no effect on microbial reduction due to the presence of fat globules in CSP which hindered the inactivation action. Milling can substitute pounding as it is much faster and can produce a uniform CSP with higher volume.
    Matched MeSH terms: Clothing
  18. Mohamed Najib Salleh, Halim Mad Lazim, Hendrik Lamsali
    Movement Health & Exercise, 2018;7(1):179-187.
    MyJurnal
    Body measurement is the first process that must be encountered before any
    custom-made compression garment can be designed. The current practice of
    obtaining the measurement is by traditional methods using tools like
    measuring tape. However, this method is considered to be time-consuming
    and usually not accurate. The most popular solution to the problem is by using
    non-contact measurement. The development of the 3D whole body scanner
    has made non-contact body measurement become a reality due to its capacity
    to capture a vast amount of information. However, the cost to buy the whole
    body scanner is quite expensive. Moreover, their sizes are also bulky which
    make them less portable. Thus, a handheld body scanner provides a solution
    to the problem. Despite that, current handheld scanner only provide image
    and visualization aspect, but not the measurement aspect. This paper reports
    the development of a method to acquire body data from a 3D handheld
    scanner. In this new method, the point cloud of a body part was collected
    using the handheld scanner. Then, the data was transformed into point
    coordinates. Several processes were developed to filter the number of points
    to allow for faster processing time and increasing the measurement accuracy.
    In the first process, only points at specific height/layers are selected. In the
    second process, the remaining points are rearranged according to their height
    and angle. In the last process, the number of points is further reduced. In this
    process, the number of points per layer is limited to 72 points. Results show
    that the method can be used to determine body measurement.
    Matched MeSH terms: Clothing
  19. Kamarulzaman bin Ibrahim
    An integral art of the Bayesian approach which is not present in the classical approach is the prior distribution. Different researchers may have different level of prior knowledge regarding the parameter of interest before seeing the data. Sometimes different prior distributions can result in different decisions, as such investigations have to be careful in making the choice of the prior distribution. In this paper, we compare results from the Bayesian analyses based on three possible choices of the prior distributions, which are uniform prior, lognormal prior and an improper prior, in the evaluation of the effectiveness of mini-roundabouts. Data from five before and after studies into the effect of mini-roundabouts when replacing priority junctions are used. The effects of the different prior distributions are distinguishable from the analysis of an anamolous 'desk-drawer' study. The uniform and improper prior pull the estimated treatment effect away from one more than the lognormal prior. The results based on lognormal prior depict a less worst scenario of the ineffectiveness of mini-roundabouts and this may correspond to the deficiency in engineering design at only a few sites. Consequently, it is more appropriate to use the lognormal prior in the analysis of mini-roundabouts as a road safety measure.
    Satu ciri yang penting dalam kaedah Bayesian yang tidak ada dalam kaedah klasik ialah taburan prior. Sebelum melihat data, mungkin setiap penyelidik mempunyai tahap pengetahuan prior yang berbeza berkenaan sesuatu parameter yang ingin dikaji. Kadang-kala taburan prior yang berlainan boleh menghasilkan keputusan yang berlainan. Oleh itu, pengkaji perlu berhati-hati dalam memilih taburan prior. Dalam kertas-kerja ini, kami bandingkan keputusan dari analisis Bayesian berdasarkan tiga pilihan taburan prior yang menasabah iaitu prior seragam, prior lognormal dan prior tak wajar untuk menilai keberkesanan bulatan mini. Data dari kajian-kajian sebelum dan selepas terhadap kesan mengantikan persimpangan dengan bulatan mini digunakan. Kesan taburan prior yang berlainan dapat dibezakan berasaskan keputusan analisis terhadap satu kajian 'laci-meja' yang ganjil. Prior seragam dan prior fak wajar felah menyebabkan anggaran nilai kesan rawatan melebihi satu lebih dari prior lognormal. Keputusan berasaskan prior lognormal ini menunjukkan senario yang kurang teruk tentang kurang berkesannya bulatan mini dan mungkin ini boleh dikaitkan dengan rekabentuk kejuruteraan yang tidak baik di beberapa tempat sahaja. Dengan itu, prior lognormal adalah lebih sesuai digunakan untuk menilai bulatan mini sebagai langkah keselamatan jalanraya.
    Matched MeSH terms: Clothing
  20. Singh G, Makinde OD
    Sains Malaysiana, 2014;43:483-489.
    The paper is aimed at studying fluid flow heat transfer in the axisymmetric boundary layer flow of a viscous incompressible fluid, along the axial direction of a vertical stationary isothermal cylinder in presence of uniform free stream with momentum slip. The equations governing the flow i.e. continuity, momentum and energy equation are transformed into non-similar boundary layer equations and are solved numerically employing asymptotic series method with Shanks transformation. The numerical scheme involves the Runge-Kutta fourth order scheme along with the shooting technique. The flow is analyzed for both assisting and opposing buoyancy and the effect of different parameters on fluid velocity, temperature distribution, heat transfer and shear stress parameters is presented graphically.
    Matched MeSH terms: Clothing
Filters
Contact Us

Please provide feedback to Administrator (afdal@afpm.org.my)

External Links