In recent years image acquisition in close range photogrammetry relies on digital sensors such as digital cameras, video cameras, CCD cameras etc that are not specifically designed for photogrammetry. This study is performed to evaluate the compatibility of the digital metric camera and non-metric camera for the purpose of mapping meandering flume, using close range photogrammetric technique and further, to determine the accuracy that could be achieved using such a technique. The meandering flume provides an opportunity to conduct an experimental study in a controlled environment. In this study, the digital images of the whole meandering flume were acquired using a compact digital camera - Nikon Coolpix S560, a Single Lens Reflex (SLR) Nikon D60 and also a metric digital camera Rollei D30. A series of digital images were acquired to cover the whole meandering flume. Secondary data of ground control points (GCP) and check points (CP), established using the Total Station technique, was used. The digital camera was calibrated and the recovered camera calibration parameters were then used in the processing of digital images. In processing the digital images, digital photogrammetric software was used for processes such as aerial triangulation, stereo compilation, generation of digital elevation model (DEM) and generation of orthophoto. The whole process was successfully performed and the output produced in the form of orthophoto. The research output is then evaluated for planimetry and vertical accuracy using root mean square error (RMSE). Based on the analysis, sub-meter accuracy is obtained. It can be concluded that the differences between the different types of digital camera are small . As a conclusion, this study proves that close range photogrammetry technique can be used for mapping meandering flume using both the metric digital camera and non-metric digital camera.
Landmarks, also known as feature points, are one of the important geometry primitives that describe the predominant characteristics of a surface. In this study we proposed a self-contained framework to generate landmarks on surfaces extracted from volumetric data. The framework is designed to be a three-fold pipeline structure. The pipeline comprises three phases which are surface construction, crest line extraction and landmark identification. With input as a volumetric data and output as landmarks, the pipeline takes in 3D raw data and produces a 0D geometry feature. In each phase we investigate existing methods, extend and tailor the methods to fit the pipeline design. The pipeline is designed to be functional as it is modularised to have a dedicated function in each phase. We extended the implicit surface polygonizer for surface construction in first phase, developed an alternative way to compute the gradient of maximal curvature for crest line extraction in second phase and finally we combine curvature information and K-means clustering method to identify the landmarks in the third phase. The implementations are firstly carried on a controlled environment, i.e. synthetic data, for proof of concept. Then the method is tested on a small scale data set and subsequently on huge data set. Issues and justifications are addressed accordingly for each phase.
Controlled humidity environment is of significance in many scientific researches and experiments. In most laboratory-scale atmospheric chambers, an electrical temperature-based control system is used to adjust humidity. Since these chambers are not affordable in every laboratory, other low cost chambers using nitrogen gas or silica gel are used to adjust humidity. In this paper, a mechanism was developed to control the relative humidity in closed lab-scale chambers. Humidification is done by spraying water through a blower fan while de-humidification is by pumping air through silica gel as well as nitrogen gas injection. A Mamdani type fuzzy controller was designed to control the components and relative humidity. The results show the proposed system and controller can adjust and maintain relative humidity from 41% to 100% with maximum overshoot of 1% and the maximum range of error of steady state of 1.2 %.
In this article, data on the demographic parameters of the Aedes albopictus were collected from those areas in Shah Alam, Malaysia that had experienced a dengue outbreak. The surveys were conducted from March to December 2017. The eggs of the Ae. albopictus were collected using ovitraps, and were analysed based on the demographic parameters in a controlled environment in an insectarium. The data were comprised of four types of biological information on the life demographic parameters of the Ae. albopictus that were monitored based on specific localities. The data were inferred information regarding egg productivity (n), egg development (%), immature development (days), and survivorship (days).
Warm compaction is an advanced manufacturing technique which consists of two consecutive steps, i.e. powder compaction at above ambient temperature and sintering in a controlled environment. Due to the relative movement between the powder mass and die wall as well as sliding among powder particles, frictional force is generated during the compaction stage. Admixed lubricant is used during the compaction step in order to minimize friction and hence improve the uniformity of the density of distribution inside the component. However, during the sintering process, trapped lubricant is often found to be burnt out hence leaving pores or voids which result in the lower strength of the final products. Warm compaction was initiated in the nineties, however not much information has been published about the effects of lubrication on the quality of the components produced through this route. Therefore, this paper presents the outcome of an experimental investigation about the effects of lubrication on manufacturing near-net shape components through the warm compaction route. Iron powder ASC 100.29 was mixed mechanically with zinc stearate to prepare the feedstock. Mixing time, weight percentage of lubricant content and compaction temperature were varied during green compact generation while sintering temperature, heating rate and holding time were manipulated during sintering. The relative densities and strengths of the final products were investigated at every compaction as well as sintering parameter. The results revealed that lubrication could provide significant effects at the compaction temperature of 180ºC while no significant effect of lubrication was observed during sintering. The suitable lubricant content was found to be 0.4 wt% and mixing time was around 30 min and the sintering temperature was around 990ºC.
Radio propagation prediction simulation methods based on deterministic technique such as ray launching is extensively used to accomplish radio channel characterization. However, the superiority of the simulation depends on the number of rays launched and received. This paper presented the indoor three-dimensional (3D) Minimum Ray Launching Maximum Accuracy (MRLMA) technique, which is applicable for an efficient indoor radio wave propagation prediction. Utilizing the novel MRLMA technique in the simulation environment for ray lunching and tracing can drastically reduce the number of rays that need to be traced, and improve the efficiency of ray tracing. Implementation and justification of MRLMA presented in the paper. An indoor office 3D layouts are selected and simulations have been performed using the MRLMA and other reference techniques. Results showed that the indoor 3D MRLMA model is appropriate for wireless communications network systems design and optimization process with respect to efficiency, coverage, number of rays launching, number of rays received by the mobile station, and simulation time.
Acetobacter xylinum strains are known as efficient producers of cellulose. A. xylinum is an obligate aerobic bacterium that has an oxygen-based metabolism. The dissolved oxygen (DO) concentration in a rotary discs reactor (RDR) is one of the most important factors that need to be observed during the cellulose synthesis by these bacteria. In this study, the effects of different discs rotation speed (5, 7, 9 and 12 rpm) and fermentation period (3, 4, 5 and 6 days) on the DO concentration and production of bacterial cellulose in a 10-L RDR were examined. The highest yield was obtained at 7 rpm with a total dried weight of 28.3 g for 4 days fermentation. The results showed that the DO concentration in the 10-L RDR increased in the range of 13 to 17% with increasing of discs rotation speed from 7 to 12 rpm. However, fermentation with high discs rotation speed at 12 rpm reduced the bacterial cellulose production. Analysis of data using Statistica 8.0 showed a high coefficient of determination value (R2 = 0.92). In conclusion, discs rotation speed gave more significant effect on the DO concentration and production of bacterial cellulose in 10-L RDR compared to fermentation period. This was further combined with synergistic effect from sufficient consumption of oxygen for the enhanced production of bacterial cellulose and providing the controlled environment for encouraging bacterial growth throughout the fermentation process.
This study investigates the effects of aircraft cabin pressure on intracranial pressure (ICP) elevation of a pneumocephalus patient. We propose an experimental setup that simulates the intracranial hydrodynamics of a pneumocephalus patient during flight. It consists of an acrylic box (skull), air-filled balloon [intracranial air (ICA)], water-filled balloon (cerebrospinal fluid and blood) and agarose gel (brain). The cabin was replicated using a custom-made pressure chamber. The setup can measure the rise in ICP during depressurization to levels similar to that inside the cabin at cruising altitude. ΔICP, i.e. the difference between mean cruising ICP and initial ICP, was found to increase with ICA volume and ROC. However, ΔICP was independent of the initial ICP. The largest ΔICP was 5 mmHg; obtained when ICA volume and ROC were 20 ml and 1,600 ft/min, respectively. The postulated ICA expansion and the subsequent increase in ICP in pneumocephalus patients during flight were successfully quantified in a laboratory setting. Based on the quantitative and qualitative analyses of the results, an ICA volume of 20 ml and initial ICP of 15 mmHg were recommended as conservative thresholds that are required for safe air travel among pneumocephalus patients. This study provides laboratory data that may be used by doctors to advise post-neurosurgical patients if they can safely fly.
Immune cell-based therapies using natural killer (NK) cells and cytotoxic T cells are under constant scrutiny, with the aim to design an effective and reduced-toxicity therapy, which will benefit patients via improved quality of life and improved prognosis. Four patients with stage IV colon cancer were administered 1, 3, 5 and 6 effector cell intravenous infusions, respectively. Peripheral blood was collected from the patients and the ex vivo activation and expansion of NK and T cells was performed in Good Manufacturing Practice-certified clean rooms for ~12-15 days. Immunophenotypic analysis of the peripheral blood mononuclear cells (PBMCs) and expanded NK and T cells was conducted using flow cytometry and the patients were followed up. On average, 4.8×107 initial PBMCs and 2.7×109 total expanded cells were obtained. The intravenous infusions of the expanded cells were not accompanied by adverse reactions. Improved prognosis, reflected by a considerable decrease in the cancer markers, accompanied by an improved quality of life in the patients were observed. In conclusion, potential strategies are currently under development for the large-scale production of effectors cells; therefore, autologous immune enhancement therapy (AIET) may be considered as a viable approach to cancer treatment.
Background: Competence-based curriculum has become the need of medical education to meet the objectives of institutions aiming to produce skilled physicians. To achieve the optimal competence and performance of graduates a number of traditional evaluation exercises have been practiced. Some of these e.g. OSCE although meet the acceptable standard of reliability and validity is the assessment done in a controlled environment. This leaves the room for performance-based assessment in real clinical situation such as mini clinical evaluation exercise (Mini-CEX). To practice and meet the challenges of Mini-CEX it is vital to undertake faculty development program with a comprehensively chalked down Mini-CEX protocol and its objectives to achieve the intended outcome. Objective: To undertake faculty development on Mini-CEX for its feasibility and acceptability as a method of formative assessment to evaluate the clinical competence of trainees in postgraduate program of Otolaryngology and Head-Neck Surgery. Method: 25 trainees from the four classes of master of surgery program of 2009 in Otolaryngology and Head-Neck Surgery (ORL-HNS) undertook Mini-CEX encounters and assessed by 9 supervisors in a 12-week period of study. Faculty development program was carried out through prior lectures deliberating on background, concept and procedure of Mini-CEX followed by demonstrations using video clip of Mini-CEX encounter recorded in own clinical environment. Students were also exposed to similar settings to take up the Mini-CEX encounter without any hesitation. Trainees were assessed in outpatient clinical setting. Program was evaluated for its feasibility and acceptability with respect to patient’s factors, clinical attributes, supervisor and trainee’s performance and their reported level of satisfaction.
Result: Faculty development and trainees orientation in Min-CEX was achieved as feasible and acceptable. Higher rating of satisfaction was reported by majority assessors and trainees as they found Mini-CEX acceptable for formative assessment. Among clinical skills highest rating was received in physical examination and lowest rating in therapeutic skills. Conclusion: A motivated faculty and organized approach towards a comprehensive knowledge on Mini-CEX for its background communication, demonstration of procedure and method to complete the rating forms is the useful guide to adopt Mini-CEX. The faculty and trainees in department of ORL-HNS found Mini-CEX as feasible and acceptable assessment tool to monitor educational activity of postgraduate program through performance-based evaluation in a real clinical situation.
Background: In order to achieve the desired performance of graduates a number of traditional evaluation exercises have been practiced to assess their competence as medical students. Many of these assessments are done in a controlled environment and mostly reflect on tests of competence than performance. Mini-CEX or direct observed procedural skills (DOPS) are the real performance-based assessment of clinical skills. Increased opportunity for observation and just-in-time feedback from the role model superiors produce a positive educational impact on students learning. This also provides trainees with formative assessment to monitor their learning objectives. However, to implement assessment strategies with Mini-CEX or DOPS needs to develop institution’s clear policy for a different teaching and learning culture of workplace based assessment. It also needs to develop user friendly rating form, checklist, elaboration of clinical competence and its attributes and procedural guidelines for practice. A precise role of these tools in the assessment of postgraduate program must be established before practicing them to evaluate and monitor trainee’s progress.
Objective: To determine DOPS for its acceptability and feasibility as a method of formative assessment of clinical skills in postgraduate program of Otolaryngology and Head-Neck Surgery.
Method: A total of 25 trainees were assessed for DOPS by 8 supervisors in this 12-weeks pilot study. A faculty development program for faculty members and trainees was run for DOPS. Trainees were advised to undertake at least one DOPS encounter out of 42 shortlisted procedures. Assessors were asked to mark trainees by completing a rating form using a checklist developed for each procedure. Trainees and assessors were asked to endorse their opinion on feasibility and acceptance of DOPS for practice of formative assessment in future. Data was analyzed to determine feasibility and acceptability of DOPS in assessment program. Result: Faculty development and trainees orientation in DOPS were found satisfactory for its acceptance and feasible for its practice. Trainees were mostly assessed in outpatient clinical setting. Majority reported higher rating of satisfaction by assessors and trainees. Among clinical skills higher rating was received in procedural skills performed by the senior trainees. Conclusion: DOPS was found feasible for practice of formative assessment of trainees in postgraduate program of Otolaryngology and Head-Neck Surgery in School of Medical Sciences (SMS) at Universiti Sains Malaysia (USM). It was well accepted by the trainees to help monitor their quality of procedural skills as self-directed learning.
The extent to which genetic gain achieved from selection programs under strictly controlled environments in the nucleus that can be expressed in commercial production systems is not well-documented in aquaculture species. The main aim of this paper was to assess the effects of genotype by environment interaction on genetic response and genetic parameters for four body traits (harvest weight, standard length, body depth, body width) and survival in Red tilapia (Oreochromis spp.). The growth and survival data were recorded on 19,916 individual fish from a pedigreed population undergoing three generations of selection for increased harvest weight in earthen ponds from 2010 to 2012 at the Aquaculture Extension Center, Department of Fisheries, Jitra in Kedah, Malaysia. The pedigree comprised a total of 224 sires and 262 dams, tracing back to the base population in 2009. A multivariate animal model was used to measure genetic response and estimate variance and covariance components. When the homologous body traits in freshwater pond and cage were treated as genetically distinct traits, the genetic correlations between the two environments were high (0.85-0.90) for harvest weight and square root of harvest weight but the estimates were of lower magnitudes for length, width and depth (0.63-0.79). The heritabilities estimated for the five traits studied differed between pond (0.02 to 0.22) and cage (0.07 to 0.68). The common full-sib effects were large, ranging from 0.23 to 0.59 in pond and 0.11 to 0.31 in cage across all traits. The direct and correlated responses for four body traits were generally greater in pond than in cage environments (0.011-1.561 vs. -0.033-0.567 genetic standard deviation units, respectively). Selection for increased harvest body weight resulted in positive genetic changes in survival rate in both pond and cage culture. In conclusion, the reduced selection response and the magnitude of the genetic parameter estimates in the production environment (i.e., cage) relative to those achieved in the nucleus (pond) were a result of the genotype by environment interaction and this effect should be taken into consideration in the future breeding program for Red tilapia.
The study was couducted to investigate the effects of gamma irradiation and CO₂ on flavonoid content and leaf gas exchange in C.asiatica. For flavonoid determination, the design was a split split plot based on Randomized Complete Block Design (RCBD). For other parameters, the designs were split plots. Statistical tests revealed significant differences in flavonoid contents of Centella asiatica leaves between different growth stages and various CO₂ treatments. CO₂ 400, G20 (400 = ambient CO₂; G20 = Plants exposed to 20 Gy) showed 82.90% higher total flavonoid content (TFC) in the 5th week than CO₂ 400 as control at its best harvest time (4th week). Increasing the concentration of CO₂ from 400 to 800 μmol/mol had significant effects on TFC and harvesting time. In fact, 800 μmol/mol resulted in 171.1% and 66.62% increases in TFC for control and irradiated plants, respectively. Moreover, increasing CO₂ concentration reduced the harvesting time to three and four weeks for control and irradiated plants, respectively. Enhancing CO₂ to 800 µmol/mol resulted in a 193.30% (CO₂ 800) increase in leaf biomass compared to 400 µmol/mol and 226.34% enhancement in irradiated plants (CO₂ 800, G20) [800 = Ambient CO₂; G20 = Plants exposed to 20 Gy] than CO₂ 400, G20. In addition, the CO₂ 800, G20 had the highest amount of flavonoid*biomass in the 4th week. The results of this study indicated that all elevated CO₂ treatments had higher PN than the ambient ones. The findings showed that when CO₂ level increased from 400 to 800 µmol/mol, stomatal conductance, leaf intercellular CO₂ and transpiration rate had the tendency to decrease. However, water use efficiency increased in response to elevated CO₂ concentration. Returning to the findings of this study, it is now possible to state that the proposed method (combined CO₂ and gamma irradiation) has the potential to increase the product value by reducing the time to harvest, increasing the yield per unit area via boosting photosynthesis capacity, as well as increasing biochemicals (flavonoids) per gram DM.
The desiccation and freezing tolerance of seeds, with and without testas, and embryonic axes of Citrus aurantifolia were investigated. Seeds were desiccated with silica gel, under the laminar air flow cabinet or by placing them on a laboratory bench. Whatever the desiccation method employed, survival before and after cryopreservation was higher for seeds without testas. When freezing intact seeds, the highest survival percentage (41.3 %) was achieved after desiccation to 7.3 % moisture content (fresh weight basis) on the laboratory bench. Survival of seeds cryopreserved without testas could reach up to 85 % after desiccation under the laminar air flow cabinet or on the laboratory bench, corresponding to moisture contents of 7.1 and 4.5 %, respectively. After desiccation with silica gel, survival reached a maximum of 60.0 %, for a seed moisture content of 3.3 %. Survival of control embryonic axes was high (80-100 %) whatever the sucrose concentration in the preculture medium and the duration of the desiccation period. After cryopreservation, no survival was noted with embryonic axes, which had not been precultured nor desiccated. Survival of non-desiccated embryonic axes after cryopreservation increased progressively in line with increasing sucrose concentrations in the preculture medium, from 7.5 % with 0.1 M sucrose to 77.5 % with 0.7 M sucrose. Survival of desiccated and cryopreserved embryos was always high, whatever the preculture treatment and desiccation period, ranging from 55.8 % to 92.5 %.
We tested the hypothesis that NO contamination of hospital compressed air also improves PaO(2) in patients with acute lung injury (ALI) and following lung transplant (LTx).