Displaying publications 1 - 20 of 43 in total

Abstract:
Sort:
  1. Ain Syaqirah Sapian N, Aidilfitri Mohamad Roslan M, Mohd Hashim A, Nasir Mohd Desa M, Halim M, Noorzianna Abdul Manaf Y, et al.
    Food Res Int, 2023 Feb;164:112332.
    PMID: 36737925 DOI: 10.1016/j.foodres.2022.112332
    Adulteration of lard with other fats and oils in food production affects many areas including economics, religion, and health. Previous studies discriminated lard based on major components of fats, i.e. triglycerides and fatty acids. This study aimed to differentiate lard and other animal fats (beef, chicken and mutton fat) based on n-alkane profiles established by gas chromatography-mass spectrometry (GC-MS). Principal Component Analysis (PCA) and Hierarchical Clustering Analysis (HCA) were able to initiate clustering of lard and other animal fats. Good result was obtained using Random Forest (RF) and Partial Least Squares-Discriminant Analysis (PLS-DA). Statistical models propose tetracosane (C24) as a potential n-alkane marker and it was found that C24 was the major alkane with composition of 15.72% (GC-MS) of total alkanes identified. Based on this finding, more interesting study may potentially be explored for the interest of various fats and oils consumers in vast applications especially using chemometrics analysis.
    Matched MeSH terms: Fats/analysis
  2. Tee ES, Ng TK, Chong YH
    Med J Malaysia, 1979 Jun;33(4):334-41.
    PMID: 522746
    Matched MeSH terms: Dietary Fats/analysis
  3. Chong YH, Mills GL
    Med J Malaya, 1966 Dec;21(2):125-7.
    PMID: 4227381
    Matched MeSH terms: Dietary Fats/analysis*
  4. Sanny M, Jinap S, Bakker EJ, van Boekel MA, Luning PA
    Food Chem, 2012 May 1;132(1):134-43.
    PMID: 26434272 DOI: 10.1016/j.foodchem.2011.10.044
    Acrylamide is a probable human carcinogen, and its presence in a range of fried and oven-cooked foods has raised considerable health concern world-wide. Dietary intake studies observed significant variations in acrylamide concentrations, which complicate risk assessment and the establishment of effective control measures. The objective of this study was to obtain an insight into the actual variation in acrylamide concentrations in French fries prepared under typical conditions in a food service establishment (FSE). Besides acrylamide, frying time, frying temperature, and reducing sugars were measured and the actual practices at receiving, thawing and frying during French fries preparation were observed and recorded. The variation in the actual frying temperature contributed most to the variation in acrylamide concentrations, followed by the variation in actual frying time; no obvious effect of reducing sugars was found. The lack of standardised control of frying temperature and frying time (due to inadequate frying equipment) and the variable practices of food handlers seem to contribute most to the large variation and high acrylamide concentrations in French fries prepared in a restaurant type of FSE as compared to chain fast-food services, and institutional caterers. The obtained insights in this study can be used to develop dedicated control measures in FSE, which may contribute to a sustainable reduction in the acrylamide intake.
    Matched MeSH terms: Dietary Fats/analysis*
  5. Nor Hayati I, Aminah A, Mamot S, Nor Aini I, Noor Lida HM
    Int J Food Sci Nutr, 2002 Jan;53(1):43-54.
    PMID: 11820096
    Anhydrous milkfat (AMF) was fractionated to obtain a series of high-melting milkfat fractions (HMF). Solid fat content (SFC) of HMF as determined by nuclear magnetic resonance (NMR) was in the range 37.6-43.6% and 21.2-27.5% measured at 20 and 30 degrees C, respectively. The HMF have a higher melting characteristic compared to AMF as analyzed by differential scanning calorimetry (DSC) with melting enthalpies of 92.2-105.0 J/g and melting peak temperatures of 39.3-41.5 degrees C. The AMF was also blended with soft palm stearin (SPOs and/or hard palm stearin (HPOs)) according to a three conventional component mixture design which providing suitable formulations for HMF. This represented three selected blends of AMF:SPOs:HPOs at three different proportions (70:15:15, 60:30:10 and 50:45:5), having SFC and DSC melting characteristics of HMF. The study revealed that higher-melting characteristics of AMF could be achieved equally well by using both fractionation and blending techniques.
    Matched MeSH terms: Dietary Fats/analysis*
  6. Norlida HM, Md Ali AR, Muhadhir I
    Int J Food Sci Nutr, 1996 Jan;47(1):71-4.
    PMID: 8616676
    Palm oil (PO ; iodin value = 52), palm stearin (POs1; i.v. = 32 and POs2; i.v. = 40) and palm kernel oil (PKO; i.v. = 17) were blended in ternary systems. The blends were then studied for their physical properties such as melting point (m.p.), solid fat content (SFC), and cooling curve. Results showed that palm stearin increased the blends melting point while palm kernel oil reduced it. To produce table margarine with melting point (m.p.) below 40 degrees C, the POs1 should be added at level of < or = 16%, while POs2 at level of < or = 20%. At 10 degrees C, eutectic interaction occur between PO and PKO which reach their maximum at about 60:40 blending ratio. Within the eutectic region, to maintain the SFC at 10 degrees C to be < or = 50%, POs1 may be added at level of < or = 7%, while POs2 at level of < or = 12%. The addition of palm stearin increased the blends solidification Tmin and Tmax values, while PKO reduced them. Blends which contained high amount of palm stearin showed melting point and cooling curves quite similar to that of pastry margarine.
    Matched MeSH terms: Dietary Fats/analysis
  7. Ng TK, Chong YH
    Med J Malaysia, 1979 Jun;33(4):331-3.
    PMID: 522745
    Matched MeSH terms: Dietary Fats/analysis
  8. Ali J, Kader HA, Hassan K, Arshat H
    Am J Clin Nutr, 1986 Jun;43(6):925-30.
    PMID: 3717068
    Our previous study showed vitamin E deficiency in newborns (69.7%) and mothers at term (85.9%) when the ratio between serum vitamin E in mg/dl and total lipids in g/dl was used as an indicator of vitamin E status. This study was conducted to determine the human milk content of vitamin E. During the first 12 days of lactation milk vitamin E levels remained almost constant (day 1, 0.68 mg/dl; day 12, 0.65 mg/dl), milk total lipid levels increased daily (day 1, 1.11 g/dl; day 12, 3.60 g/dl), and the ratio between milk vitamin E and total lipids dropped steadily (day 1, 1.3; day 12, 0.2). In spite of this drop in vitamin E status, it is unlikely that vitamin E availability will be affected in neonates, because normal neonates absorb milk fats well and this ability increases with age.
    Matched MeSH terms: Fats/analysis*
  9. Jahurul MH, Zaidul IS, Nik Norulaini NA, Sahena F, Abedin MZ, Mohamed A, et al.
    Food Chem, 2014 Jul 1;154:323-9.
    PMID: 24518349 DOI: 10.1016/j.foodchem.2013.11.098
    The blending effects of mango seed fat (MSF), extracted using supercritical fluid, and palm stearin (PS) to formulate hard cocoa butter replacers (CBRs), were investigated. The triglycerides (TG), thermal properties and solid fat content (SFC) of the formulated blends were determined using different chromatographic and thermal techniques. All the blends had three main TGs; namely, 1,3-dipalmitoyl-2-oleoylglycerol (POP) (8.6-17.7%), 1-palmitoyl-2-oleoyl-3-stearoyl-glycerol (POS) (12.6-19.6%), and 1,3-distearoyl-2-oleoyl-glycerol (SOS) (37.2-31.4%), with SOS being the major component. The melting peak temperatures gradually increased and shifted towards higher temperatures with PS. The crystallization onset temperatures increased, while the offset decreased with PS. The SFC did not drop to 0% at 37.5°C, which was shifted to 0% at and above 40°C for some blends. The studies revealed that CBRs could be prepared by blending MSF and PS, and they could be utilised by chocolate manufacturers in tropical countries.
    Matched MeSH terms: Dietary Fats/analysis*
  10. Ahmad Nizar NN, Nazrim Marikkar JM, Hashim DM
    J Oleo Sci, 2013;62(7):459-64.
    PMID: 23823911
    A study was conducted to differentiate lard, chicken fat, beef fat and mutton fat using Gas Chromatography Mass Spectrometry (GC-MS) and Elemental Analyzer-Isotope Ratio Mass Spectrometry (EA-IRMS). The comparison of overall fatty acid data showed that lard and chicken fat share common characteristics by having palmitic, oleic and linoleic acid as major fatty acids while beef and mutton fats shared common characteristics by possessing palmitic, stearic and oleic acid as major fatty acids. The direct comparisons among the fatty acid data, therefore, may not be suitable for discrimination of different animal fats. When the fatty acid distributional data was subjected to Principle Component Analysis (PCA), it was demonstrated that stearic, oleic and linoleic acids as the most discriminating parameters in the clustering of animal fats into four subclasses. The bulk carbon analysis of animal fats using EA-IRMS showed that determination of the carbon isotope ratios (δ¹³C) would be a good indicator for discriminating lard, chicken fat, beef fat and mutton fat. This would lead to a faster and more efficient method to ascertain the source of origin of fats used in food products.
    Matched MeSH terms: Dietary Fats/analysis*
  11. Manaf YN, Marikkar JM, Long K, Ghazali HM
    J Oleo Sci, 2013;62(6):335-43.
    PMID: 23728324
    The seeds (6.9±0.2% by weight of fruit) of the red-skin rambutan (Nephelium lappaceum L.) contain a considerable amount of crude fat (38.0±4.36%) and thus, the aim of the study was to determine the physico-chemical properties of this fat for potential applications. The iodine and saponification values, and unsaponifiable matter and free fatty acid contents of the seed fat were 50.27 g I2/100g fat, 182.1 mg KOH/g fat, 0.8% and 2.1%, respectively. The fat is pale yellow with a Lovibond color index of 3.1Y+1.1R. The fatty acid profile indicates an almost equal proportion of saturated (49.1%) and unsaturated (50.9%) fatty acids, where oleic (42.0%) and arachidic (34.3%) acids were the most dominant fatty acids. It also contained small amounts of stearic (8.0%), palmitic (4.6%), gadoleic (5.9%), linoleic (2.2%), behenic (2.1%) palmitoleic (0.7%) myristic (0.1%) and erucic (0.1%) acids. HPLC analysis showed that the fat comprised mainly unknown triacylglycerols (TAG) with high retention times indicating they have higher carbon numbers compared with many vegetable oils. The fat has melting and cooling points of 44.2°C and -42.5°C, respectively, making it a semi-solid at room temperature. The solid content at 0°C was 53.5% and the fat melted completely at 40°C. z-Nose analysis showed that the presence of high levels of volatile compounds in red-skin rambutan seed and seed fat.
    Matched MeSH terms: Fats/analysis*
  12. Aziah AA, Min WL, Bhat R
    Int J Food Sci Nutr, 2011 Sep;62(6):559-67.
    PMID: 21534889 DOI: 10.3109/09637486.2011.562883
    Sponge cake prepared by partial substitution of wheat flour with mango pulp and mango peel flours (MPuF and MPeF, respectively) at different concentrations (control, 5%, 10%, 20% or 30%) were investigated for the physico-chemical, nutritional and organoleptic characteristics. Results showed sponge cake incorporated with MPuF and MPeF to have high dietary fiber with low fat, calorie, hydrolysis and predicted glycemic index compared with the control. Increasing the levels of MPuF and MPeF in sponge cake had significant impact on the volume, firmness and color. Sensory evaluation showed sponge cake formulated with 10% MPuF and 10% MPeF to be the most acceptable. MPeF and MPuF have high potential as fiber-rich ingredients and can be utilized in the preparation of cake and other bakery products to improve the nutritional qualities.
    Matched MeSH terms: Dietary Fats/analysis*
  13. Saadi S, Ariffin AA, Ghazali HM, Miskandar MS, Abdulkarim SM, Boo HC
    J Food Sci, 2011 Jan-Feb;76(1):C21-30.
    PMID: 21535649 DOI: 10.1111/j.1750-3841.2010.01922.x
    The ability of palm oil (PO) to crystallize as beta prime polymorph has made it an attractive option for the production of margarine fat (MF). Palm stearin (PS) expresses similar crystallization behavior and is considered one of the best substitutes of hydrogenated oils due to its capability to impart the required level of plasticity and body to the finished product. Normally, PS is blended with PO to reduce the melting point at body temperature (37 °C). Lipid phase, formulated by PO and PS in different ratios were subjected to an emulsification process and the following analyses were done: triacylglycerols, solid fat content (SFC), and thermal behavior. In addition, the microstructure properties, including size and number of crystals, were determined for experimental MFs (EMFs) and commercial MFs (CMFs). Results showed that blending and emulsification at PS levels over 40 wt% significantly changed the physicochemical and microstructure properties of EMF as compared to CMF, resulting in a desirable dipalmitoyl-oleoyl-glycerol content of less than 36.1%. SFC at 37 °C, crystal size, crystal number, crystallization, and melting enthalpies (ΔH) were 15%, 5.37 μm, 1425 crystal/μm(2), 17.25 J/g, and 57.69J/g, respectively. All data reported indicate that the formation of granular crystals in MFs was dominated by high-melting triacylglycerol namely dipalmitoyl-oleoyl-glycerol, while the small dose of monoacylglycerol that is used as emulsifier slowed crystallization rate. Practical Application: Most of the past studies were focused on thermal behavior of edible oils and some blends of oils and fats. The crystallization of oils and fats are well documented but there is scarce information concerning some mechanism related to crystallization and emulsification. Therefore, this study will help to gather information on the behavior of emulsifier on crystallization regime; also the dominating TAG responsible for primary granular crystal formations, as well as to determine the best level of stearin to impart the required microstructure properties and body to the finished products.
    Matched MeSH terms: Dietary Fats/analysis*
  14. Nurkhoeriyati T, Huda N, Ahmad R
    Int J Food Sci Nutr, 2012 Jun;63(4):498-505.
    PMID: 22126368 DOI: 10.3109/09637486.2011.637902
    The nutritional properties of surimi-like materials produced from spent duck meat processed conventionally (CDS) and processed with acid and alkaline solubilization (ACDS and ALDS, respectively) were studied. The essential amino acids (EAAs) content was significantly higher (p 
    Matched MeSH terms: Dietary Fats/analysis*
  15. Cheong LZ, Tan CP, Long K, Affandi Yusoff MS, Lai OM
    J Sci Food Agric, 2010 Oct;90(13):2310-7.
    PMID: 20661900 DOI: 10.1002/jsfa.4088
    Diacylglycerol (DAG), which has health-enhancing properties, is sometimes added to bakery shortening to produce baked products with enhanced physical functionality. Nevertheless, the quantity present is often too little to exert any positive healthful effects. This research aimed to produce bakery shortenings containing significant amounts of palm diacyglycerol (PDG). Physicochemical, textural and viscoelastic properties of the PDG bakery shortenings during 3 months storage were evaluated and compared with those of commercial bakery shortening (CS).
    Matched MeSH terms: Dietary Fats/analysis*
  16. Arifin N, Peng KS, Long K, Ping TC, Affandi Yusoff MS, Nor Aini I, et al.
    J Sci Food Agric, 2010 Apr 30;90(6):943-8.
    PMID: 20355133 DOI: 10.1002/jsfa.3886
    This study aims to investigate the textural properties and sensory qualities of cookies made from medium- and long-chain triacylglycerol (MLCT)-enriched margarines. Margarine with formulations of MLCT:palm olein:palm stearin, 60:30:10 and 70:20:10, were selected to produce cookies. The textural properties of cookies were determined using a texture analyser. Quantitative descriptive analysis (QDA) and acceptance test were carried out to describe the attributes and to evaluate the degree of liking of cookies, respectively.
    Matched MeSH terms: Fats/analysis
  17. Fadzillah NA, Man Yb, Rohman A, Rosman AS, Ismail A, Mustafa S, et al.
    J Oleo Sci, 2015;64(7):697-703.
    PMID: 25994556 DOI: 10.5650/jos.ess14255
    The authentication of food products from the presence of non-allowed components for certain religion like lard is very important. In this study, we used proton Nuclear Magnetic Resonance ((1)H-NMR) spectroscopy for the analysis of butter adulterated with lard by simultaneously quantification of all proton bearing compounds, and consequently all relevant sample classes. Since the spectra obtained were too complex to be analyzed visually by the naked eyes, the classification of spectra was carried out.The multivariate calibration of partial least square (PLS) regression was used for modelling the relationship between actual value of lard and predicted value. The model yielded a highest regression coefficient (R(2)) of 0.998 and the lowest root mean square error calibration (RMSEC) of 0.0091% and root mean square error prediction (RMSEP) of 0.0090, respectively. Cross validation testing evaluates the predictive power of the model. PLS model was shown as good models as the intercept of R(2)Y and Q(2)Y were 0.0853 and -0.309, respectively.
    Matched MeSH terms: Dietary Fats/analysis*
  18. Babji AS, Alina AR, Seri Chempaka MY, Sharmini T, Basker R, Yap SL
    Int J Food Sci Nutr, 1998 Sep;49(5):327-32.
    PMID: 10367001
    Four formulations of burgers, prepared with 65% lean meat and 15% fat consisting of RBD palm stearin (PS), Socfat 4000P and Socfat 4100P and beef fat (BF) as control were evaluated for solid fat content (SFC), slip melting point (SMP), cooking loss, proximate analysis (moisture, fat and protein), colour, i.e. lightness ('L'), redness ('a') and yellowness ('b'), free fatty acid (FFA), iodine value (IV), thiobarbituric acid (TBA) and texture profile analysis (TPA). Sensory evaluation was carried out for texture, juiciness, aroma, oiliness and overall acceptance. SFC and SMP for raw and cooked SF4000P beef burgers were closest to BF control burgers, falling into the range of 35-40 degrees C. Cooking loss was highest for PS burgers, there were no significant differences (P > 0.05) amongst BF, SF4000P and SF4100P burgers. Proximate analysis on raw burgers showed SF4000P to contain high fat and lowest moisture contents. Objective textural measurements using texture profile analysis (TPA) for all cooked burgers showed no significant differences (P > 0.05) for springiness and cohesiveness. Variation of values among the formulations for hardness, gumminess and chewiness are explained by the differences of SFC for beef burgers with various types of fats. Raw and cooked PS burgers have the lightest 'L' values compared with other fat-substituted burgers while BF, SF4000P and SF4100P indicated no significant differences (P > 0.05) for 'L', 'a' and 'b' values. Beef fat showed the highest amount of free fatty acids (FFA) compared to palm oil samples. For the iodine value (IV), SF4000P showed the highest value which means that it contained the highest level of unsaturated fatty acids followed by PS, BF and SF4100P successively. SF4000P had the highest TBA values followed successively by BF, PS and SF4100P. For sensory evaluation, PS burgers had the least oily taste. This may be due to its high cooking loss. Taste panelists could not differentiate burgers with substituted vegetable fats against the control burgers.
    Matched MeSH terms: Fats/analysis
  19. Sundram K, Nor RM
    Methods Mol Biol, 2002;186:221-32.
    PMID: 12013770
    Matched MeSH terms: Fats/analysis
  20. Md Ali AR
    Int J Food Sci Nutr, 1996 Jan;47(1):15-22.
    PMID: 8616668
    Two types of palm oil and sal fat based cocoa butter equivalents, namely fCBE (produced by using co-fractionation method) and mCBE (produced by using conventional method) were prepared. Results showed that the fCBE had triglyceride composition and solidification characteristics closer to the Malaysian cocoa butter than the mCBE produced at the same yield percentage. Increasing acetone washing time had little effect on the fCBE if compared to the effect of increasing palm olein to sal fat blend ratio. Co-fractionation technique increase the compatibility between CBE component triglycerides. Thus, more palm oil can be incorporated in the preparation and the process can be carried out at not low temperature as compared to the conventional method.
    Matched MeSH terms: Dietary Fats/analysis*
Filters
Contact Us

Please provide feedback to Administrator (afdal@afpm.org.my)

External Links