The 3-Monochloropropane-1, 2-diol ester (3-MCPDE) and glycidyl ester (GE) are formed at high processing temperatures with the presence of respective precursors. Both are potentially harmful to humans, causing adverse health impacts including kidney damage, reproductive problems, and increased risk of cancer. The presence of 3-MCPDE and GE in palm oil is of particular concern because of its widespread use by the food industry. There are a variety of methods for reducing 3-MCPDE and GE. For example, water washing eliminates mostly inorganic chlorides that, in turn, reduce the formation of 3-MCPDE. 3-MCPDE has also been reduced by up to 99% using combinations of methods and replacing stripping steam with alcohol-based media. Activated carbon, clay, antioxidants, potassium-based salts, and other post-refining steps have positively lowered GE, ranging from 10 to 99%. Several approaches have been successful in reducing these process contaminants without affecting other quality metrics.
Palm oil is one of the most important agroindustries in Malaysia. Huge quantities of palm oil mill effluent (POME) pose a great threat to aqueous environment due to its very high COD. To make full use of discharged wastes, the integrated "zero discharge" pilot-scale industrial plant comprising "pretreatment-anaerobic and aerobic process-membrane separation" was continuously operated for 1 year. After pretreatment in the oil separator tank, 55.6% of waste oil in raw POME could be recovered and sold and anaerobically digested through 2 AnaEG reactors followed by a dissolved air flotation (DAF); average COD reduced to about 3587 mg/L, and biogas production was 27.65 times POME injection which was used to generate electricity. The aerobic effluent was settled for 3 h or/and treated in MBR which could remove BOD3 (30°C) to less than 20 mg/L as required by Department of Environment of Malaysia. After filtration by UF and RO membrane, all organic compounds and most of the salts were removed; RO permeate could be reused as the boiler feed water. RO concentrate combined with anaerobic surplus sludge could be used as biofertilizer.
The large amount of waste produced by the food industries causes serious environmental problems and also results in economic losses if not utilized effectively. Different research reports have revealed that food industry by-products can be good sources of potentially valuable bioactive compounds. As such, the mango juice industry uses only the edible portions of the mangoes, and a considerable amount of peels and seeds are discarded as industrial waste. These mango by-products come from the tropical or subtropical fruit processing industries. Mango by-products, especially seeds and peels, are considered to be cheap sources of valuable food and nutraceutical ingredients. The main uses of natural food ingredients derived from mango by-products are presented and discussed, and the mainstream sectors of application for these by-products, such as in the food, pharmaceutical, nutraceutical and cosmetic industries, are highlighted.
The combination of irradiation and biological technique was chosen to study COD, BOD5 and colour removal from textiles effluent in the presence of food industry wastewater. Two biological treatments, the first consisting a mix of non irradiated textile and food industry wastewater and the second a mix of irradiated textiles wastewater and food industry wastewater were operated in parallel. Reduction percentage of COD in textiles wastewater increased from 29.4% after radiation to 62.4% after further undergoing biological treatment. After irradiation, the BOD5 of textiles wastewater was reduced by 22.1%, but reverted to the original value of 36mg/1 after undergoing biological treatment. Colour had decreased from 899.5 ADMI to 379.3 ADM1 after irradiation and continued to decrease to 109.3 ADMI after passing through biological treatment.
The application of non-thermal processing technology (NTP) is increasing within the food industry. The absence of heat in this technology offer some advantages such as the sensory and nutritional attributes of the product remaining unaffected, thus yielding products with better quality compared to traditional processing methods. Suitability of technology for a certain application varies according to the nature of the reason and the purpose for processing. Some NTP has long been used in the food industry in Southeast Asia, but most are still at the initial stage of research. Despite several existing challenges, these technologies have the potential to be taken up as an alternative to processing of value-added food products especially now when consumer and trade demands as well as economic strength in the region is changing.
Optimum processing conditions on palm oil-based formulations are required to produce the desired quality margarine. As oils and fats contribute to the overall property of the margarine, this paper will review the importance of beta' tending oils and fats in margarine formulation, effects of the processing parameters -- emulsion temperature, flow-rate, product temperature and pin-worker speed -- on palm oil margarines produced and their subsequent behaviour in storage. Palm oil, which contributes the beta' crystal polymorph and the best alternative to hydrogenated liquid fats, and the processing conditions can affect the margarine consistency by influencing the solid fat content (SFC) and the types of crystal polymorph formed during production as well as in storage. Palm oil, or hydrogenated palm oil and olein, in mixture with oils of beta tending, can veer the product to the beta' crystal form. However, merely having beta' crystal tending oils is not sufficient as the processing conditions are also important. The emulsion temperature had no significant effect on the consistency and polymorphic changes of the product during storage, even though differences were observed during processing. The consistency of margarine during storage was high at low emulsion flow-rates and low at high flow rates. The temperature of the scraped-surface tube-cooler is the most important parameter in margarine processing. High temperature will produce a hardened product with formation of beta-crystals during storage. The speed of the pin-worker is responsible for inducing crystallization but, at the same time, destroys the crystal agglomerates, resulting in melting.
Biofilm formation can lead to various consequences in the food processing line such as contamination and equipment breakdowns. Since formation of biofilm can occur in various conditions; this study was carried out using L. monocytogenes ATCC 19112 and its biofilm formation ability tested under various concentrations of sodium chloride and temperatures. Cultures of L. monocytogenes ATCC 19112 were placed in 96-well microtitre plate containing concentration of sodium chloride from 1-10% (w/v) and incubated at different temperature of 4 °C, 30 °C and 45 °C for up to 60 h. Absorbance reading of crystal violet staining showed the density of biofilm formed in the 96-well microtitre plates was significantly higher when incubated in 4 °C. The formation of biofilm also occurs at a faster rate at 4 °C and higher optical density (OD 570 nm) was observed at 45 °C. This shows that storage under formation of biofilm that may lead to a higher contamination along the processing line in the food industry. Formation of biofilm was found to be more dependent on temperature compared to sodium chloride stress.
Previous literatures have demonstrated a significant research gap in terms of the quality of the management practices in the organizational performances of the SMEs particularly in the food processing industry in Malaysia. Subsequently, an exploratory study is conducted to verify the proposed critical success factors (CSF) and the model constructs for SMEs in the Malaysian
food industry that is in line with these practices. Therefore, the purpose of this paper is to identify CSF of quality management practices of the Small and Medium Enterprises (SMEs) in the Malaysian food industry and to develop a conceptual framework of quality management practices based on the Total Quality Management (TQM) in relation to the organizational performance of the SMEs in the food processing industry in Malaysia. The quality management framework consists of leadership, corporate planning, human resource management, customer focus, supplier focus, information management, process management and quality assurance as the CSF. Finding from the exploratory study has supported the proposed constructs and results show that the instrument is reliable in measuring the construct. Thus, this study is important to support the SMEs in the food processing industry in Malaysia to manage and prioritize the implementation of QM in order to improve the organizational performance.
Since early 2000, Malaysian food-export industries have recognised the demand for food
compliant with Islamic dietary law (halal), with primary consumer choices based on quality
and safety. The lack of documented monitoring for health hazards and haram substances led
to the withdrawal of certification. The HACCP-based halal quality-assurance standards were
developed as a result, using the HACCP criteria for safety, religious dietary requirement and
quality. Halal critical control points (HlCCP) are identified using HACCP criteria and a question
tree on HALAL processing and storage. This approach harmonizes and unifies halal processing
with the specific food industry via an HACCP–based halal quality-assurance system.
This paper reviews the structure, function and applications of collagens in food industry. Collagen is the most abundant protein in animal origin. It helps maintaining the structure of various tissues and organs. It is a modern foodstuff and widely used in food and beverage industries to improve the elasticity, consistency and stability of products. Furthermore, it also enhances the quality, nutritional and health value of the products. Collagen has been applied as protein dietary supplements, carriers, food additive, edible film and coatings. Therefore, this paper will review the functions and applications of collagen in the food and beverage industries. The structure and composition of collagen are also included.
This study reported the extraction optimization and characterization of cobia (Rachycentron canadum) skin gelatin. Optimization study was carried out to determine the effect of CH3COOH concentration, skin to water ratio, extraction temperature and extraction time on gelatin yield (GY) and gel strength (GS) using Response Surface Methodology (RSM). The optimum conditions were 0.15mol/L for CH3COOH concentration, 82.4oC of extraction temperature, 6 h of extraction time and 1:6 of skin to water ratio, which produced cobia gelatin with GY of 20.10% and GS of 205.6 g. Characteristics of cobia skin gelatin (CG) were then compared to that of commercial bovine gelatin (BG). It was found that the most dominant amino acid in CG was glycine, proline and alanine. There was no difference in foaming and emulsifying properties of CG and BG at 1% concentration, but at 2% and 3% concentration, BG performed better. CG was found to have higher fat binding capacity but lower water holding capacity than BG. Least gelling concentration for CG was recorded at 2% while for BG at 1%. CG and BG had a pI at pH 6.05 and 4.82, respectively. This study shows that cobia skin gelatin has potential as halal alternative to bovine gelatin in food industry.
By-products from different animal sources are currently being utilised for beneficial purposes. Chicken processing plants all over the world generate large amount of solid by-products in form of heads, legs, bones, viscera and feather. These wastes are often processed into livestock feed, fertilizers and pet foods or totally discarded. Inappropriate disposal of these wastes causes environmental pollution, diseases and loss of useful biological resources like protein, enzymes and lipids. Utilisation methods that make use of these biological components for producing value added products rather than the direct use of the actual waste material might be another viable option for dealing with these wastes. This line of thought has consequently led to researches on these wastes as sources of protein hydrolysates, enzymes and polyunsaturated fatty acids. Due to the multi-applications of protein hydrolysates in various branches of science and industry, and the large body of literature reporting the conversion of animal wastes to hydrolysates, a large section of this review was devoted to this subject. Thus, this review reports the known functional and bioactive properties of hydrolysates derived from chicken by-products as well their utilisation as source of peptone in microbiological media. Methods of producing these hydrolysates including their microbiological safety are discussed. Based on the few references available in the literature, the potential of some chicken by-product as sources of proteases and polyunsaturated fatty acids are pointed out along with some other future applications.
The reduction of the 3-monochloropropane-1,2-diol esters (3-MCPDE) and glycidyl esters (GE) was successfully achieved by the optimization of four processing parameters: phosphoric acid dosage, degumming temperature, bleaching earth dosage, and deodorization temperature by response surface methodology without the need for additional processing steps. The optimized processing conditions were 0.31% phosphoric acid dosage, 50 °C degumming temperature, 3% bleaching earth dosage, and 240 °C deodorization temperature. The optimization resulted in more than 80% and 65% reduction of 3-MCPDE and GE levels, respectively with color and FFA contents maintained in the acceptable range specified by Palm Oil Refiners Association of Malaysia. The optimized refining condition was transferred to macro scale refining units of 1 kg and 3 kg capacities to investigate its successful application during scale-up process.
Banana (Musaceae) is one of the world's most important fruit crops that is widely cultivated in tropical countries for its valuable applications in food industry. Its enormous by-products are an excellent source of highly valuable raw materials for other industries by recycling agricultural waste. This prevents an ultimate loss of huge amount of untapped biomass and environmental issues. This review discusses extensively the breakthrough in the utilization of banana by-products such as peels, leaves, pseudostem, stalk and inflorescence in various food and non-food applications serving as thickening agent, coloring and flavor, alternative source for macro and micronutrients, nutraceuticals, livestock feed, natural fibers, and sources of natural bioactive compounds and bio-fertilizers. Future prospects and challenges are the important key factors discussed in association to the sustainability and feasibility of utilizing these by-products. It is important that all available by-products be turned into highly commercial outputs in order to sustain this renewable resource and provide additional income to small scale farming industries without compromising its quality and safety in competing with other commercial products.
3-monochloropropane-1,2-diol esters (3-MCPDE) and glycidyl esters (GE) are processed-developed contaminants presence in vegetable oils after undergo refining process under excessive heat. Refined oils are extensively used in various frying applications, nevertheless, the reservation against their quality and safety aspects are of major concern to consumers and food industry. Realizing the importance to address these issues, this article deliberates an overview of published studies on the manifestation of 3-MCPDE and GE when vegetable oils undergo for frying process. With the modest number of published frying research associated to 3-MCPDE and GE, we confined our review from the perspectives of frying conditions, product properties, antioxidants and additives, pre-frying treatments and frying oil management. Simplicity of the frying process is often denied by the complexity of reactions occurred between oil and food which led to the development of unwanted contaminants. The behavior of 3-MCPDE and GE is closely related to physico-chemical characteristics of oils during frying. As such, relationships between 3-MCPDE and/or GE with frying quality indices - i.e. acidity in term of free fatty acid or acid value); secondary oxidation in term of p-anisidine value, total polar compounds and its fractions, and refractive index - were also discussed when oils were subjected under intermittent and continuous frying conditions.
Different parts of a plant (seeds, fruits, flower, leaves, stem, and roots) contain numerous biologically active compounds called "phytoconstituents" that consist of phenolics, minerals, amino acids, and vitamins. The conventional techniques applied to extract these phytoconstituents have several drawbacks including poor performance, low yields, more solvent use, long processing time, and thermally degrading by-products. In contrast, modern and advanced extraction nonthermal technologies such as pulsed electric field (PEF) assist in easier and efficient identification, characterization, and analysis of bioactive ingredients. Other advantages of PEF include cost-efficacy, less time, and solvent consumption with improved yields. This review covers the applications of PEF to obtain bioactive components, essential oils, proteins, pectin, and other important materials from various parts of the plant. Numerous studies compiled in the current evaluation concluded PEF as the best solution to extract phytoconstituents used in the food and pharmaceutical industries. PEF-assisted extraction leads to a higher yield, utilizes less solvents and energy, and it saves a lot of time compared to traditional extraction methods. PEF extraction design should be safe and efficient enough to prevent the degradation of phytoconstituents and oils.
Fungi are important natural product sources that have enormous potential for the production of novel compounds for use in pharmacology, agricultural applications and industry. Compared with other natural sources such as plants, fungi are highly diverse but understudied. However, research on Cladosporium cladosporioides revealed the existence of bioactive products such as p-methylbenzoic acid, ergosterol peroxide (EP) and calphostin C as well as enzymes including pectin methylesterase (PME), polygalacturonase (PG) and chlorpyrifos hydrolase. p-Methylbenzoic acid has ability to synthesise 1,5-benzodiazepine and its derivatives, polyethylene terephthalate and eicosapentaenoic acid. EP has anticancer, antiangiogenic, antibacterial, anti-oxidative and immunosuppressive properties. Calphostin C inhibits protein kinase C (PKC) by inactivating both PKC-epsilon and PKC-alpha. In addition, calphostin C stimulates apoptosis in WEHI-231 cells and vascular smooth muscle cells. Based on the stimulation of endoplasmic reticulum stress in some types of cancer, calphostin C has also been evaluated as a potential photodynamic therapeutic agent. Methylesterase (PME) and PG have garnered attention because of their usage in the food processing industry and significant physiological function in plants. Chlorpyrifos, a human, animal and plant toxin, can be degraded and eliminated by chlorpyrifos hydrolase.
The purpose of this paper is to identify the key domains of entrepreneurial behaviour among business
owner in food processing industry. The study utilized a deductive research design and quantitative
method. There are twenty-one statements about entrepreneurial behaviour to discover a core action
associated with entrepreneurial behaviour. An entrepreneurial behaviour is defined as small family
business strategic behaviour that captures specific entrepreneurial aspects (Walker and Brown, 2004).
In additions, it is the actions taken by the small business owner to achieve business performance
(Delmar, 1996). According to Kirkley (2015), entrepreneurial behaviour as self determined human
action is based on a specific set of values which the individual uses to make decisions about how to
behave in situations that a meaningful to their business. The questionnaires focused primarily on the
meaning of entrepreneurial behaviour as self-determination to be succeed in business. There were 70
respondents were selected by simple random sampling. The data were analysed by Exploratory Factor
Analysis (EFA) and categorised into relevant domains. The result shows four specific domains of
entrepreneurial behaviour business owner in food processing industry, namely, leadership, proactiveness,
committed and risk taking. The finding items to each of these domains are consistent with
the small family business perspective. The practical implication is the presence of the specific core
action associated with entrepreneurial behaviour. The business owner should employ the four core
action to sustain the business. The result of this study is importance to academician in small business
area, business advisor from government and non government sectors, and small family business owner.
In recent years, issues regading safety and wellness of dietary oils and fats have received major attention. This is particularly so in the case of structured modified fats, which are being used extensively to meet the product-specific demand primarily in bakery industry as shortenings, cocoa butter substitutes in confectionary industry, and in margarine preparation, as butter substitute. During modification stages, native oils and fats are subjected to different physical and chemical treatments such as fractionation, hydrogenation and interesterification in order to produce fats with desirable
physical as well as functional properties. Numerous studies have demonstrated the adverse health effects of these modified oils and fats, especially trans fatty acids, using animal models as well as human volunteers. Consequently, the decadesold process of partial hydrogenation of oils has been abandoned in most nations. However, alternative technologies to hydrogenation are on rise, creating new trends in modified oils and fats synthesis to cater food industry needs that may have unforeseeable consequences on human health.