Displaying all 14 publications

Abstract:
Sort:
  1. Hashim N, Hemalatha N, Thangaraj K, Kareem A, Ahmed A, Hassan NF, et al.
    Forensic Sci Int, 2015 Aug;253:137.e1-7.
    PMID: 26103928 DOI: 10.1016/j.forsciint.2015.05.020
    A research that tested the methods suitable for comparing ante- and post-mortem radiographic patterns of frontal sinuses concluded that superimposition should be followed as a stringent method for establishing individual identification. We verified the practical relevance of prescribing superimposition by superimposing ante- and post-mortem frontal sinus patterns recorded in case situations as well as simulated ante- and post-mortem of frontal sinus patterns recorded using archived skulls. For superimposition, the wipe facility available in the vision mixer was employed in addition to the mix mode. Ante- and post-mortem radiographic patterns that were available in two earlier cases were not superimposable. Related simulated ante- and post-mortem radiographic patterns of frontal sinuses are superimposable only when the skull that is initially oriented for recording the ante-mortem radiograph is retained in the same posture for recording the post-mortem radiograph also. Once the skull has been removed from the X-ray table, after recording the simulated ante-mortem radiograph, and repositioned for the simulated post-mortem radiograph, even when the intervening time is 1min, the sinus patterns in these radiographs are not superimposable. Superimposition cannot be used as a conditional requirement for side-by-side comparison of radiographic patterns of frontal sinuses.
    Matched MeSH terms: Forensic Anthropology/methods*
  2. Chidambaram R
    JNMA J Nepal Med Assoc, 2016 12 10;54(201):46-54.
    PMID: 27935913
    Forensic odontology is a sub-discipline of dental science which involves the relationship between dentistry and the law. The specialty of forensic odontology is applied in radiographic investigation, human bite marks analysis, anthropologic examination and during mass disasters. Besides the fact that radiographs require pretentious laboratory, it is still claimed to be a facile, rapid, non-invasive method of age identification in the deceased. The budding DNA technology has conquered the traditional procedures and currently being contemplated as chief investigating tool in revealing the hidden mysteries of victims and suspects, especially in hopeless circumstances. Forensic odontology has played a chief role in solving cold cases and proved to be strong evidence in the court of law. Systematic collection of dental records and preservation of the same would marshal the legal officials in identification of the deceased. To serve the forensic operation and legal authorities, dental professionals need to be familiar with the basics of forensic odontology, which would create a consciousness to preserve the dental data. The aim of this paper is to emphasize the vital applications of forensic odontology in medico-legal issues. Conjointly the recent advancements applied in forensic human identification have been updated.
    Matched MeSH terms: Forensic Anthropology/methods*
  3. Jayaprakash PT
    Forensic Sci Int, 2015 Jan;246:110-21.
    PMID: 25498986 DOI: 10.1016/j.forsciint.2014.10.043
    Establishing identification during skull-photo superimposition relies on correlating the salient morphological features of an unidentified skull with those of a face-image of a suspected dead individual using image overlay processes. Technical progression in the process of overlay has included the incorporation of video cameras, image-mixing devices and software that enables real-time vision-mixing. Conceptual transitions occur in the superimposition methods that involve 'life-size' images, that achieve orientation of the skull to the posture of the face in the photograph and that assess the extent of match. A recent report on the reliability of identification using the superimposition method adopted the currently prevalent methods and suggested an increased rate of failures when skulls were compared with related and unrelated face images. The reported reduction in the reliability of the superimposition method prompted a review of the transition in the concepts that are involved in skull-photo superimposition. The prevalent popular methods for visualizing the superimposed images at less than 'life-size', overlaying skull-face images by relying on the cranial and facial landmarks in the frontal plane when orienting the skull for matching and evaluating the match on a morphological basis by relying on mix-mode alone are the major departures in the methodology that may have reduced the identification reliability. The need to reassess the reliability of the method that incorporates the concepts which have been considered appropriate by the practitioners is stressed.
    Matched MeSH terms: Forensic Anthropology/methods
  4. Nambiar P, Carson G, Taylor JA, Brown KA
    J Forensic Odontostomatol, 2001 Jun;19(1):5-8.
    PMID: 11494677
    A wad of used chewing gum recovered from the scene of a burglary contained impressions of human teeth. Casts of these impressions displayed unique morphological characteristics which were found to show concordance with corresponding features present on casts of the posterior teeth of a suspect.
    Matched MeSH terms: Forensic Anthropology/methods
  5. Zyoud TYT, Abdul Rashid SN, Suppiah S, Mahmud R, Kabeer A, Abd Manaf R, et al.
    Malays J Pathol, 2020 Dec;42(3):423-431.
    PMID: 33361724
    INTRODUCTION: Post-mortem computed tomography (PMCT) provides information that helps in the determination of the cause of death and corpse identification of disaster victims. One of the methods for corpse identification includes assessment of the body stature. There is a lack of post-mortem imaging studies that focus on the anthropometric assessment of corpses. Our aim was to identify the relationship between cadaveric spine length and autopsy length (AL) among and autopsy length (AL) among a Malaysian population and derive a regression formula for the estimation of corpse body height using PMCT.

    MATERIALS AND METHODS: We retrospectively assessed 107 cadavers that had undergone conventional autopsy and PMCT. We made 5 measurements from the PMCT that included cervical length (CL), thoracic length (TL), lumbosacral length (LS), total column length of the spine, excluding the sacrum and coccyx (TCL), and ellipse line measurement of the whole spine, excluding the sacrum and coccyx (EL). We compared these anthropometric PMCT measurements with AL and correlated them using linear regression analysis.

    RESULTS: The results showed a significant linear relationship existed between TL and LS with AL, which was higher in comparison with the other parameters than the rest of the spine parameters. The linear regression formula derived was: 48.163 + 2.458 (TL) + 2.246 (LS).

    CONCLUSIONS: The linear regression formula derived from PMCT spine length parameters particularly thoracic and lumbar spine gave a finer correlation with autopsy body length and can be used for accurate estimation of cadaveric height. To the best of our knowledge, this is the first ever linear regression formula for cadaveric height assessment using only post mortem CT spine length measurements.

    Matched MeSH terms: Forensic Anthropology/methods*
  6. Ibáñez O, Valsecchi A, Cavalli F, Huete MI, Campomanes-Alvarez BR, Campomanes-Alvarez C, et al.
    Leg Med (Tokyo), 2016 Nov;23:59-70.
    PMID: 27890106 DOI: 10.1016/j.legalmed.2016.09.009
    Craniofacial superimposition has the potential to be used as an identification method when other traditional biological techniques are not applicable due to insufficient quality or absence of ante-mortem and post-mortem data. Despite having been used in many countries as a method of inclusion and exclusion for over a century it lacks standards. Thus, the purpose of this research is to provide forensic practitioners with standard criteria for analysing skull-face relationships. Thirty-seven experts from 16 different institutions participated in this study, which consisted of evaluating 65 criteria for assessing skull-face anatomical consistency on a sample of 24 different skull-face superimpositions. An unbiased statistical analysis established the most objective and discriminative criteria. Results did not show strong associations, however, important insights to address lack of standards were provided. In addition, a novel methodology for understanding and standardizing identification methods based on the observation of morphological patterns has been proposed.
    Matched MeSH terms: Forensic Anthropology/methods*
  7. Nor FM, Abdullah N, Mustapa AM, Qi Wen L, Faisal NA, Ahmad Nazari DA
    J Forensic Leg Med, 2013 Nov;20(8):947-52.
    PMID: 24237796 DOI: 10.1016/j.jflm.2013.09.006
    Estimation of stature is an important step in developing a biological profile for human identification. It may provide a valuable indicator for an unknown individual in a population. The aim of this study was to analyse the relationship between stature and lower limb dimensions in the Malaysian population. The sample comprised 100 corpses, which included 69 males and 31 females between the age range of 20-90 years old. The parameters measured were stature, thigh length, lower leg length, leg length, foot length, foot height and foot breadth. Results showed that the mean values in males were significantly higher than those in females (p 
    Matched MeSH terms: Forensic Anthropology/methods
  8. Johan NA, Khamis MF, Abdul Jamal NS, Ahmad B, Mahanani ES
    J Forensic Odontostomatol, 2012 Jul;30(1):45-54.
    PMID: 23000811
    This study aimed to assess the variability of the lower third molar (tooth 38 and 48) development in Northeast Malaysian population with respect to the side of dentition, to generate age prediction models and to compare the outcome with other studies. A total of 1080 orthopantomograms of Northeast Malaysian population aged between 14 and 25 years (540 males and 540 females) from the Hospital Universiti Sains Malaysia's archive which met the inclusion and exclusion criteria were selected and the maturity stages of tooth 38 and 48 were scored using Demirjian's stages (A-H). The findings showed a wide variation of the development of lower third molars in the Northeast Malaysian population. The roots developed earlier in males than in females. The development of the dentition on opposite sides of the mandible was synchronously in females and males. A multiple regression analysis shows that 71.1% of variance in age was explained by sex and developmental stage of tooth 48. An age prediction model was generated from the regression analysis: [Age = 7.117 + 1.907*(stage of tooth 48) - 0.432*(sex)] with mean prediction errors between -0.17 to 3.14 years. The obtained data in the current study are useful for references and determining age of unidentified human remains for identification investigation.
    Matched MeSH terms: Forensic Anthropology/methods
  9. Damas S, Wilkinson C, Kahana T, Veselovskaya E, Abramov A, Jankauskas R, et al.
    Forensic Sci Int, 2015 Dec;257:504-508.
    PMID: 26482539 DOI: 10.1016/j.forsciint.2015.07.045
    Craniofacial superimposition, although existing for one century, is still a controversial technique within the scientific community. Objective and unbiased validation studies over a significant number of cases are required to establish a more solid picture on the reliability. However, there is lack of protocols and standards in the application of the technique leading to contradictory information concerning reliability. Instead of following a uniform methodology, every expert tends to apply his own approach to the problem, based on the available technology and deep knowledge on human craniofacial anatomy, soft tissues, and their relationships. The aim of this study was to assess the reliability of different craniofacial superimposition methodologies and the corresponding technical approaches to this type of identification. With all the data generated, some of the most representative experts in craniofacial identification joined in a discussion intended to identify and agree on the most important issues that have to be considered to properly employ the craniofacial superimposition technique. As a consequence, the consortium has produced the current manuscript, which can be considered the first standard in the field; including good and bad practices, sources of error and uncertainties, technological requirements and desirable features, and finally a common scale for the craniofacial matching evaluation. Such a document is intended to be part of a more complete framework for craniofacial superimposition, to be developed during the FP7-founded project MEPROCS, which will favour and standardize its proper application.
    Matched MeSH terms: Forensic Anthropology/methods
  10. Ibáñez O, Vicente R, Navega DS, Wilkinson C, Jayaprakash PT, Huete MI, et al.
    Forensic Sci Int, 2015 Dec;257:496-503.
    PMID: 26060056 DOI: 10.1016/j.forsciint.2015.05.030
    As part of the scientific tasks coordinated throughout The 'New Methodologies and Protocols of Forensic Identification by Craniofacial Superimposition (MEPROCS)' project, the current study aims to analyse the performance of a diverse set of CFS methodologies and the corresponding technical approaches when dealing with a common dataset of real-world cases. Thus, a multiple-lab study on craniofacial superimposition has been carried out for the first time. In particular, 26 participants from 17 different institutions in 13 countries were asked to deal with 14 identification scenarios, some of them involving the comparison of multiple candidates and unknown skulls. In total, 60 craniofacial superimposition problems divided in two set of females and males. Each participant follow her/his own methodology and employed her/his particular technological means. For each single case they were asked to report the final identification decision (either positive or negative) along with the rationale supporting the decision and at least one image illustrating the overlay/superimposition outcome. This study is expected to provide important insights to better understand the most convenient characteristics of every method included in this study.
    Matched MeSH terms: Forensic Anthropology/methods*
  11. Lai PS, Khoo LS, Mohd Hilmi S, Ahmad Hafizam H, Mohd Shah M, Nurliza A, et al.
    Malays J Pathol, 2015 Aug;37(2):123-35.
    PMID: 26277669 MyJurnal
    Skeletal examination is an important aspect of forensic pathology practice, requiring effective bone cleaning with minimal artefact. This study was conducted to compare between chemical and entomology methods of bone cleaning. Ten subjects between 20 and 40 years old who underwent uncomplicated medico-legal autopsies at the Institute of Forensic Medicine Malaysia were randomly chosen for this descriptive cross sectional study. The sternum bone was divided into 4 parts, each part subjected to a different cleaning method, being two chemical approaches i.e. laundry detergent and a combination of 6% hydrogen peroxide and powder sodium bicarbonate and two entomology approaches using 2nd instar maggots of Chrysomyia rufifacies and Ophyra spinigera. A scoring system for grading the outcome of cleaning was used. The effectiveness of the methods was evaluated based on average weight reduction per day and median number of days to achieve the average score of less than 1.5 within 12 days of the bone cleaning process. Using maggots was the most time-effective and costeffective method, achieving an average weight reduction of 1.4 gm per day, a median of 11.3 days to achieve the desired score and an average cost of MYR 4.10 per case to reach the desired score within 12 days. This conclusion was supported by blind validation by forensic specialists achieving a 77.8% preference for maggots. Emission scanning electron microscopy evaluation also revealed that maggots especially Chrysomyia rufifacies preserved the original condition of the bones better allowing improved elucidation of bone injuries in future real cases.
    Matched MeSH terms: Forensic Anthropology/methods*
  12. Jayaprakash PT, Hashim N, Yusop RA
    Forensic Sci Int, 2015 Aug;253:131.e1-10.
    PMID: 26103927 DOI: 10.1016/j.forsciint.2015.04.026
    Video vision mixer based skull-photo superimposition is a popular method for identifying skulls retrieved from unidentified human remains. A report on the reliability of the superimposition method suggested increased failure rates of 17.3 to 32% to exclude and 15 to 20% to include skulls while using related and unrelated face photographs. Such raise in failures prompted an analysis of the methods employed for the research. The protocols adopted for assessing the reliability are seen to vary from those suggested by the practitioners in the field. The former include overlaying the skull- and face-images on the basis of morphology by relying on anthropometric landmarks on the front plane of the face-images and evaluating the goodness of match depending on mix-mode images; the latter consist of orienting the skull considering landmarks on both the eye and ear planes of the face- and skull-images and evaluating the match utilizing images seen in wipe-mode in addition to those in mix-mode. Superimposition of a skull with face-images of five living individuals in two sets of experiments, one following the procedure described for the research on reliability and the other applying the methods suggested by the practitioners has shown that overlaying the images on the basis of morphology depending on the landmarks on the front plane alone and assessing the match in mix-mode fails to exclude the skull. However, orienting the skull relying on the relationship between the anatomical landmarks on the skull- and face-images such as Whitnall's tubercle and exocanthus in the front (eye) plane and the porion and tragus in the rear (ear) plane as well as assessing the match using wipe-mode images enables excluding that skull while superimposing with the same set of face-images.
    Matched MeSH terms: Forensic Anthropology/methods
  13. Jayaprakash PT
    Forensic Sci Int, 2017 Sep;278:411.e1-411.e8.
    PMID: 28754256 DOI: 10.1016/j.forsciint.2017.04.021
    Often cited reliability test on video superimposition method integrated scaling face-images in relation to skull-images, tragus-auditory meatus relationship in addition to exocanthion-Whitnall's tubercle relationship when orientating the skull-image and wipe mode imaging in addition to mix mode imaging when obtaining skull-face image overlay and evaluating the goodness of match. However, a report that found higher false positive matches in computer assisted superimposition method transited from the above foundational concepts and relied on images of unspecified sizes that are lesser than 'life-size', frontal plane landmarks in the skull- and face- images alone for orientating the skull-image and mix images alone for evaluating the goodness of match. Recently, arguing the use of 'life-size' images as 'archaic', the authors who tested the reliability in the computer assisted superimposition method have denied any method transition. This article describes that the use of images of unspecified sizes at lesser than 'life-size' eliminates the only possibility to quantify parameters during superimposition which alone enables dynamic skull orientation when overlaying a skull-image with a face-image in an anatomically acceptable orientation. The dynamic skull orientation process mandatorily requires aligning the tragus in the 2D face-image with the auditory meatus in the 3D skull-image for anatomically orientating the skull-image in relation to the posture in the face-image, a step not mentioned by the authors describing the computer assisted superimposition method. Furthermore, mere reliance on mix type images during image overlay eliminates the possibility to assess the relationship between the leading edges of the skull- and face-image outlines as also specific area match among the corresponding craniofacial organs during superimposition. Indicating the possibility of increased false positive matches as a consequence of the above method transitions, the need for testing the reliability in the superimposition method adopting concepts that are considered safe is stressed.
    Matched MeSH terms: Forensic Anthropology/methods
  14. Monum T, Prasitwattanseree S, Das S, Siriphimolwat P, Mahakkanukrauh P
    Clin Ter, 2017 6 15;168(3):e203-e207.
    PMID: 28612898 DOI: 10.7417/T.2017.2007
    Sex estimation is an important step of postmortem investigation and the femur is a useful bone for sex estimation by using metric analysis method. Even though there have been a reported sex estimation method by using femur in Thais, the temporal change related to time and anthropological data need to be renewed. Thus the aim of this study is to re-evaluate sex estimation by femur in Thais. 97 adult male and 103 female femora were random chosen from Forensic osteology research center and 6 measurements were applied tend to. To compare with previous Thai data, mid shaft diameter to increase but femoral head and epicondylar breadth to stabilize and when tested previous discriminant function by vertical head diameter and epicondalar breadth, the accuracy of prediction was lower than previous report. From the new data, epicondalar breadth is the best variable for distinguishing male and female at 88.7 percent of accuracy, following by transverse and vertical head diameter at 86.7 percent and femoral neck diameter at 81.7 percent of accuracy. Multivariate discriminant analysis indicated transverse head diameter and epicondylar breadth performed highest rate of accuracy at 89.7 percent. The percent of accuracy of femur was close to previous reported sex estimation by talus and calcaneus in Thai population. Thus, for especially in case of lower limb remain, which absence of pelvis.
    Matched MeSH terms: Forensic Anthropology/methods*
Filters
Contact Us

Please provide feedback to Administrator (afdal@afpm.org.my)

External Links