Displaying publications 1 - 20 of 27 in total

Abstract:
Sort:
  1. Basri NA, Hashim S, Ramli AT, Bradley DA, Hamzah K
    J Radiol Prot, 2016 Dec;36(4):R96-R111.
    PMID: 27631675
    Malaysia has initiated a range of pre-project activities in preparation for its planned nuclear power programme. Clearly one of the first steps is the selection of sites that are deemed suitable for the construction and operation of a nuclear power plant. Here we outline the Malaysian regulatory requirements for nuclear power plant site selection, emphasizing details of the selection procedures and site characteristics needed, with a clear focus on radiation safety and radiation protection in respect of the site surroundings. The Malaysia Atomic Energy Licensing Board (AELB) site selection guidelines are in accord with those provided in International Atomic Energy Agency (IAEA) and United Stated Nuclear Regulatory Commission (USNRC) documents. To enhance the suitability criteria during selection, as well as to assist in the final decision making process, possible assessments using the site selection characteristics and information are proposed.
    Matched MeSH terms: Government Regulation*
  2. Joshi D, Sharma I, Gupta S, Singh TG, Dhiman S, Prashar A, et al.
    Environ Sci Pollut Res Int, 2021 Nov;28(42):59608-59629.
    PMID: 34515931 DOI: 10.1007/s11356-021-16345-5
    Medical devices, being life-saving tools, are considered to be a boon for healthcare system. However, in addition to their therapeutic effects, there are several ill consequences that are caused by these devices. An effective cohort vigilant system was needed to manage such adverse effects. This had led to the introduction of materiovigilance. Materiovigilance is the study and follow-up of occurrences that arise as a result from the usage of the medical equipment. It not only manages adverse events (AE) but also creates harmonization among countries. Keeping these objectives in focus, the principles, perspectives, and practices with regard to materiovigilance that are followed in the USA, Europe, China, Japan, Australia, Canada, and India are being compared. Such a comparison is essential, which will help us to understand the gaps in the current regulatory systems in the above-mentioned countries and furthermore will provide a comprehensive picture to the regulatory authorities to amend any existing laws if required. These amendments may ensure optimal patient safety by providing them a benign experience from the use of medical devices.
    Matched MeSH terms: Government Regulation*
  3. Talib N
    Med Law, 2006 Sep;25(3):445-62.
    PMID: 17078519
    This paper sets out the practice of traditional, alternative and/or complementary medicine in Malaysia. It gives an overview of the types of alternative medicine available, and the legal regulation, or lack of it within the current setting. The relevant policies and governmental action in this area are highlighted. Relevant case law decisions in this area are also included. The practice of spiritual healing as one form of traditional medicine, and its role within the spectrum of alternative medicine is dealt with briefly. The significant question of integration of alternative medicine within the existing allopathic system is addressed. The paper concludes that as interest in, and usage of alternative medicine is not likely to decrease, certain measures must be taken by the relevant authorities to ensure among others, the safety and efficacy of these medicines.
    Matched MeSH terms: Government Regulation
  4. Arshat H
    Med J Malaysia, 1989 Mar;44(1):1-2.
    PMID: 2626107
    Matched MeSH terms: Government Regulation
  5. Lancet, 1982 Aug 21;2(8295):422-3.
    PMID: 6124812
    Matched MeSH terms: Government Regulation
  6. Nurushshahirah Sabodin, Adekunle Qudus Adeleke
    MyJurnal
    This paper examined the significant relationship between government regulation and
    construction waste management among Malaysian construction industries. Survey
    was conducted among 10 contractors registered G7, using proportionate stratified
    random sampling, out of which 10 questionnaire were collected for data analysis with
    five point Likert scale categories of waste management from previous studies,
    statistical analysis affirmed a significant positive relationship between government
    regulation and construction waste management in Malaysian construction industries
    through Statistical Package for the Social Sciences.
    Matched MeSH terms: Government Regulation
  7. Lunze K, Idrisov B, Golichenko M, Kamarulzaman A
    BMJ, 2016 Jun 09;353:i2943.
    PMID: 27284009 DOI: 10.1136/bmj.i2943
    Matched MeSH terms: Government Regulation
  8. Loh LC, Wong PS
    Med J Malaysia, 2007 Aug;62(3):210-3.
    PMID: 18246909
    A self-answered, anonymously completed, nationwide questionnaire survey was conducted between June 2002 and May 2003 among Malaysian doctors through post and at medical meetings. Findings based on 116 government and 110 private doctors who satisfactorily completed the forms (effective respondent rate: 30.1%) showed that more than 70% of government and private doctors claimed familiarity with asthma CPGs but proportionately more private doctors considered them "unworkable" and were reluctant to adopt them in their practice setting, quoting cost as the primary reason. Between those who frequently adopted the CPGs and those who did not, there was an equally high proportion of inappropriate prescribing. Despite the shortcomings of such a survey, our findings suggest that medicinal cost and practitioner's prescribing practices are important in the acceptance and execution of asthma CPGs recommendations.
    Matched MeSH terms: Government Regulation*
  9. Deng J, Zhang N, Ahmad F, Draz MU
    PMID: 31208141 DOI: 10.3390/ijerph16122130
    :The aim of this paper is to examine the impact of local government competition and environmental regulation intensity on regional innovation performance and its regional heterogeneity. Based on the theoretical mechanism of the aforementioned variables, this study uses the Chinese provincial panel data from 2001 to 2016. We use the super-efficiency data envelopment analysis (SE-DEA) to evaluate regional innovation performance. To systematically examine the impact of local government competition and environmental regulation intensity on regional innovation performance, we build a panel date model using the feasible generalized least squares (FGLS) method. The results indicate that: the regional innovation performance can be significantly improved through technological spillover; local governments compete for foreign direct investment (FDI) to participate in regional innovative production. Moreover, improvements in environmental regulation intensity enhance regional innovation performance through the innovation compensation effect. Our results show that the local governments tend to choose lower environmental regulation intensity to compete for more FDI, which has an inhibitory effect on regional innovation performance. Furthermore, due to regional differences in factor endowments, economic reforms and economic development levels in Chinese provinces, there exists a significant regional consistency in the impact of local government competition and environmental regulation intensity on regional innovation performance. Therefore, institutional arrangements and incentive constraints must be adopted to enhance regional innovation performance as well as to guide and foster the mechanism of green innovation competition among local governments. At the same time, considering the regional heterogeneity of local government competition and environmental regulation intensity affecting regional innovation performance, policy makers should avoid the "one-size-fits-all" strategy of institutional arrangements.
    Matched MeSH terms: Government Regulation*
  10. Rampal KG, Mohd Nizam J
    Regul Toxicol Pharmacol, 2006 Nov;46(2):131-5.
    PMID: 16899331
    In Malaysia exposures in the workplace are regulated under the Factories and Machinery Act (FMA), 1967 and also under the more comprehensive Occupational Safety and Health Act (OSHA) enacted in 1994. With OSHA 1994 the philosophy of legislating safety and health in the workplace changed from one that was very prescriptive and containing detailed technical provisions under FMA, 1967 to one that is more flexible and encourages self-regulation under OSHA 1994. OSHA 1994 is supported by regulations, codes of practices and guidelines to further clarify the provisions in the Act. Under the FMA 1967 emphasis was on safety while with OSHA 1994 there has been equal emphasis on addressing health hazards in the workplace. Regulations for occupational exposures are developed by the Department of Occupational Safety and Health with tripartite and stakeholder consultation. When developing these regulations International Labor Organization Conventions, laws of other countries and occupational exposure standards adopted internationally are reviewed. The government also conducts surveys to collect information on both exposures and health effects in workplaces to have better understanding on specific occupational health problems. Effective law enforcement is crucial in ensuring compliance to safety and health law. The challenge at the moment is to ensure all employers and employees, particularly those in the small and medium enterprises, understand and comply with the provisions stipulated in the legislation.
    Matched MeSH terms: Government Regulation*
  11. McDaniel PA, Solomon G, Malone RE
    Environ Health Perspect, 2005 Dec;113(12):1659-65.
    PMID: 16330343
    Tobacco is a heavily pesticide-dependent crop. Because pesticides involve human safety and health issues, they are regulated nationally and internationally; however, little is known about how tobacco companies respond to regulatory pressures regarding pesticides. In this study we analyzed internal tobacco industry documents to describe industry activities aimed at influencing pesticide regulations. We used a case study approach based on examination of approximately 2,000 internal company documents and 3,885 pages of U.S. Environmental Protection Agency documents obtained through Freedom of Information Act requests. The cases involved methoprene, the ethylene bisdithiocarbamates, and phosphine. We show how the tobacco industry successfully altered the outcome in two cases by hiring ex-agency scientists to write reports favorable to industry positions regarding pesticide regulations for national (U.S. Environmental Protection Agency) and international (World Health Organization) regulatory bodies. We also show how the industry worked to forestall tobacco pesticide regulation by attempting to self-regulate in Europe, and how Philip Morris encouraged a pesticide manufacturer to apply for higher tolerance levels in Malaysia and Europe while keeping tobacco industry interest a secret from government regulators. This study suggests that the tobacco industry is able to exert considerable influence over the pesticide regulatory process and that increased scrutiny of this process and protection of the public interest in pesticide regulation may be warranted.
    Matched MeSH terms: Government Regulation*
  12. Ta GC, Mokhtar MB, Peterson PJ, Yahaya NB
    Ind Health, 2011;49(6):765-73.
    PMID: 22020020
    The European Union (EU) and the World Health Organization (WHO) have applied different approaches to facilitate the implementation of the UN Globally Harmonized System of Classification and Labelling of Chemicals (GHS). The EU applied the mandatory approach by gazetting the EU Regulation 1272/2008 incorporating GHS elements on classification, labelling and packaging of substances and mixtures in 2008; whereas the WHO utilized a voluntary approach by incorporating GHS elements in the WHO guidelines entitled 'WHO Recommended Classification of Pesticides by Hazard' in 2009. We report on an analysis of both the mandatory and voluntary approaches practised by the EU and the WHO respectively, with close reference to the GHS 'purple book'. Our findings indicate that the mandatory approach practiced by the EU covers all the GHS elements referred to in the second revised edition of the GHS 'purple book'. Hence we can conclude that the EU has implemented the GHS particularly for industrial chemicals. On the other hand, the WHO guidelines published in 2009 should be revised to address concerns raised in this paper. In addition, both mandatory and voluntary approaches should be carefully examined because the classification results may be different.
    Matched MeSH terms: Government Regulation
  13. Saalah S, Abdullah LC, Aung MM, Salleh MZ, Awang Biak DR, Basri M, et al.
    Polymers (Basel), 2021 Mar 05;13(5).
    PMID: 33807622 DOI: 10.3390/polym13050795
    Nowadays, there is a significant trend away from solvent-based polyurethane systems towards waterborne polyurethane dispersions due to government regulations requiring manufacturers to lower total volatile organic compounds, as well as consumer preference for more environmentally friendly products. In this work, a renewable vegetable oil-based polyol derived from jatropha oil was polymerized with isophorone diisocyanate and dimethylol propionic acid to produce anionic waterborne polyurethane dispersion. Free standing films with up to 62 wt.% bio-based content were successfully produced after evaporation of water from the jatropha oil-based waterborne polyurethane (JPU) dispersion, which indicated good film formation. The chemical and thermo-mechanical properties of the JPU films were characterized. By increasing the OH numbers of polyol from 161 mgKOH/g to 217 mgKOH/g, the crosslinking density of the JPU was significantly increased, which lead to a better storage modulus and improved hydrophobicity. Overall, JPU produced from polyol having OH number of 217 mgKOH/g appears to be a promising product for application as a binder for wood and decorative coatings.
    Matched MeSH terms: Government Regulation
  14. Svevo-Cianci KA, Hart SN, Rubinson C
    Child Abuse Negl, 2010 Jan;34(1):45-56.
    PMID: 20060588 DOI: 10.1016/j.chiabu.2009.09.010
    (1) To identify which United Nations Convention on the Rights of the Child (CRC) recommended child protection (CP) measures, such as policy, reporting systems, and services for child abuse and neglect (CAN) victims, individually or in combination, were most important in establishing a basic level of child protection in 42 countries; and (2) to assess whether these measures were necessary or sufficient to achieve basic child protection in developing and industrialized countries.
    Matched MeSH terms: Government Regulation*
  15. Assunta M, Dorotheo EU
    Tob Control, 2016 May;25(3):313-8.
    PMID: 25908597 DOI: 10.1136/tobaccocontrol-2014-051934
    OBJECTIVE: To measure the implementation of WHO Framework Convention on Tobacco Control (FCTC) Article 5.3 at country level using a new Tobacco Industry Interference Index and to report initial results using this index in seven Southeast Asian countries.

    METHODS: Score sheet based on WHO FCTC Article 5.3 Guidelines sent to correspondents in seven Southeast Asian countries, using a scoring system designed with the help of tobacco control experts and validated through focused group discussions.

    RESULTS: The seven countries ranked from the lowest level of interference to the highest are Brunei, Thailand, Lao PDR, Cambodia, Philippines, Malaysia and Indonesia. Countries that face high levels of unnecessary interaction with the tobacco industry also face high levels of tobacco industry influence in policy development. Most governments do not allow any tobacco industry representatives on their delegation to sessions of the Conference of the Parties or its subsidiary bodies nor accept their sponsorship for delegates, but most governments still accept or endorse offers of assistance from the tobacco industry in implementing tobacco control policies. Most governments also receive tobacco industry contributions (monetary or in kind) or endorse industry corporate social responsibility activities. Governments do not have a procedure for disclosing interactions with the tobacco industry, but Lao PDR, Philippines and Thailand have instituted measures to prevent or reduce industry interference.

    CONCLUSIONS: This Tobacco Industry Interference Index, based on the WHO FCTC Article 5.3 Guidelines, is a useful advocacy tool for identifying both progress and gaps in national efforts at implementing WHO FCTC Article 5.3.

    Matched MeSH terms: Government Regulation*
  16. Fauziah SH, Agamuthu P
    Waste Manag Res, 2012 Jul;30(7):656-63.
    PMID: 22455994 DOI: 10.1177/0734242X12437564
    In Malaysia, landfills are being filled up rapidly due to the current daily generation of approximately 30,000 tonnes of municipal solid waste. This situation creates the crucial need for improved landfilling practices, as sustainable landfilling technology is yet to be achieved here. The objective of this paper is to identify and evaluate the development and trends in landfilling practices in Malaysia. In 1970, the disposal sites in Malaysia were small and prevailing waste disposal practices was mere open-dumping. This network of relatively small dumps, typically located close to population centres, was considered acceptable for a relatively low population of 10 million in Malaysia. In the 1980s, a national programme was developed to manage municipal and industrial wastes more systematically and to reduce adverse environmental impacts. The early 1990s saw the privatization of waste management in many parts of Malaysia, and the establishment of the first sanitary landfills for MSW and an engineered landfill (called 'secure landfill' in Malaysia) for hazardous waste. A public uproar in 2007 due to contamination of a drinking water source from improper landfilling practices led to some significant changes in the government's policy regarding the country's waste management strategy. Parliament passed the Solid Waste and Public Cleansing Management (SWPCM) Act 2007 in August 2007. Even though the Act is yet to be implemented, the government has taken big steps to improve waste management system further. The future of the waste management in Malaysia seems somewhat brighter with a clear waste management policy in place. There is now a foundation upon which to build a sound and sustainble waste management and disposal system in Malaysia.
    Matched MeSH terms: Government Regulation
  17. Agamuthu P, Victor D
    Waste Manag Res, 2011 Sep;29(9):945-53.
    PMID: 21771873 DOI: 10.1177/0734242X11413332
    This paper seeks to examine the provisions for extended producer responsibility (EPR) within the Malaysian environmental and waste management policies and to determine its existing practice and future prospects in Malaysia. Malaysian waste generation has been increasing drastically where solid waste generation was estimated to increase from about 9.0 million tonnes in 2000 to about 10.9 million tonnes in 2010, to about 12.8 million tonnes in 2015 and finally to about 15.6 million tonnes in 2020. Malaysian e-waste was estimated to be about 652 909 tonnes in 2006 and was estimated to increase to about 706 000 tonnes in 2010 and finally to about 1.2 million tonnes in 2020. The projected increasing generation of both solid waste and scheduled wastes is expected to burden the country's resources and environment in managing these wastes in a sustainable manner. The concept of EPR is provided for in the Malaysia waste management system via the Environmental Quality Act 1974 and the Solid Waste and Public Cleansing Management Act 2007. However, these provisions in the policy are generic in nature without relevant regulations to enable its enforcement and as such the concept of EPR still remains on paper whereas the existing practice of EPR in Malaysia is limited through voluntary participation. In conclusion, policy trends of EPR in Malaysia seem to indicate that Malaysia may be embarking on the path towards EPR through the enactment of an EPR regulation.
    Matched MeSH terms: Government Regulation
  18. Agamuthu P, Khidzir KM, Hamid FS
    Waste Manag Res, 2009 Oct;27(7):625-33.
    PMID: 19470545 DOI: 10.1177/0734242X09103191
    Drivers of sustainable waste management are defined as groups of related factors that influence the development (or lack thereof) of industry. There has been no attempt to reasonably list the drivers that influence sustainable waste management in Asia. In this review, four groups of drivers of sustainable waste management, specifically of Asia, are explained. The four groups of drivers consist of three human elements (human, economic and institutional) and the environment as a single driving group. Typically, the first three groups have been very influential, with the environment driver, noticeably, only considered when preceded by other groups of drivers. The interconnectedness of the drivers and neglect of the environment driver is discussed. It is concluded that while the essence of the four groups of drivers can be found all over Asia, each driving group must be investigated in a local context and all information combined to devise sustainable waste management policies or strategies.
    Matched MeSH terms: Government Regulation
  19. De Silva WD, Sinha DN, Kahandawaliyanag A
    Indian J Cancer, 2012 Oct-Dec;49(4):438-42.
    PMID: 23442410 DOI: 10.4103/0019-509X.107753
    Sri Lanka became a signatory to the WHO Frame Work Convention on Tobacco Control in September 2003, and this was ratified in November 2003. With a view to reduce the use of tobacco in Sri Lanka, the National Authority on Tobacco and Alcohol Act (NATA) No. 27 of 2006 was implemented.
    Matched MeSH terms: Government Regulation
Filters
Contact Us

Please provide feedback to Administrator (afdal@afpm.org.my)

External Links