Displaying publications 1 - 20 of 38 in total

Abstract:
Sort:
  1. Sankaran R, Bong JH, Chow YH, Wong FWF, Ling TC, Show PL
    Curr Protein Pept Sci, 2019 Jun 28.
    PMID: 31264547 DOI: 10.2174/1389203720666190628142203
    Reversed micellear system (RMS) is an innovative technique used for the isolation, extraction and purification of proteins and enzymes. Studies have demonstrated that RMS is an efficient purification technology for extracting proteins and enzymes from natural plant materials or fermentation broth. Lately, reverse micelles have created wider biological applications and with the ease of scaling up and the possibility for continuous process has made RMS a vital purification technique in various field. In this study, an extensive review of RMS with the current application in biotechnology will be examined. This review provides insights with the fundamental principles, key variables and parameters of RMS. In addition, a comparative study of RMS with other liquid-liquid extraction techniques are included. The present review aims to provide a general overview of RMS by summarising the research works, since the introduction of the technology to current development.
    Matched MeSH terms: Liquid-Liquid Extraction
  2. Kee PE, Ng TC, Lan JC, Ng HS
    Crit Rev Biotechnol, 2020 Jun;40(4):555-569.
    PMID: 32283954 DOI: 10.1080/07388551.2020.1747388
    Aqueous biphasic system (ABS) is widely used in the recovery, extraction, purification and separation of proteins, enzymes, nucleic acids and antibodies. The ABS with high water content and low interfacial tension offers a biocompatible environment for the recovery of labile biomolecules. Process integration can be achieved using ABS by incorporating multiple-steps of purification, concentration and purification of biomolecules in a single-step operation which often results in high product recovery yield and purity. Conventional ABS is usually formed by aqueous solutions of two polymers or a polymer and a salt above a critical concentration. The high viscosity of polymer-based ABS causes slow phase separation and hinders the mass transfer of biomolecules, whereas polymer/salt ABS is characterized by high ionic strength resulting in the loss of bioactivity of recovered biomolecules. These limitations have encouraged the development of novel ABS which is more cost-effective for various biotechnological applications. This review discusses the characteristics and mechanisms of several types of emerging unconventional ABS using phase-forming components such as hyperbranched polymers, special salts, surfactants, magnetic fields, the addition of nanoparticles and incorporation of various solvent. Moreover, several novel applications of ABS for different separation purposes such as microfluidic-based ABS, ABS bioreactors, application of ABS as an analytical tool, and ABS micropatterning are discussed in this review. In the last section of this review, a comprehensive summary of process integration using ABS for extractive fermentations, bioconversion, crystallization and precipitation is also supplemented for the comprehensive review of various types and applications of ABS in recent years.
    Matched MeSH terms: Liquid-Liquid Extraction
  3. Phong WN, Show PL, Chow YH, Ling TC
    J Biosci Bioeng, 2018 Sep;126(3):273-281.
    PMID: 29673987 DOI: 10.1016/j.jbiosc.2018.03.005
    Aqueous two-phase system (ATPS) has been suggested as a promising separation tool in the biotechnological industry. This liquid-liquid extraction technique represents an interesting advance in downstream processing due to several advantages such as simplicity, rapid separation, efficiency, economy, flexibility and biocompatibility. Up to date, a range of biotechnological products have been successfully recovered from different sources with high yield using ATPS-based strategy. In view of the important potential contribution of the ATPS in downstream processing, this review article aims to provide latest information about the application of ATPS in the recovery of various biotechnological products in the past 7 years (2010-2017). Apart from that, the challenges as well as the possible future work and outlook of the ATPS-based recovery method have also been presented in this review article.
    Matched MeSH terms: Liquid-Liquid Extraction/methods*
  4. Low KL, Idris A, Mohd Yusof N
    Food Chem, 2020 Mar 01;307:125631.
    PMID: 31634761 DOI: 10.1016/j.foodchem.2019.125631
    Lutein available in the current market is derived from marigold petals. However, extensive studies showed that microalgae are rich in lutein content and potentially exploitable for its dietary and other industrial applications. In this study, microwave assisted binary phase solvent extraction method (MABS) was the novel protocol being developed and optimized to achieve maximum lutein recovery from microalgae Scenedesmus sp. biomass. Results showed that 60% potassium hydroxide solution with acetone in the ratio of 0.1 (ml/ml) was the ideal binary phase solvent composition. Empirical model developed using response surface methodology revealed highest lutein content can be recovered through MABS extraction method at 55 °C treatment temperature, 36 min in extraction time, 0.7 (mg/ml) for biomass to solvent ratio, 250 Watt microwave power and 250 rpm stirring speed. This optimized novel protocol had increased the amount of lutein recovered by 130% and shorten the overall extraction time by 3-folds.
    Matched MeSH terms: Liquid-Liquid Extraction/methods*
  5. Lee LY, Morad N, Ismail N, Talebi A, Rafatullah M
    Int J Mol Sci, 2020 Sep 18;21(18).
    PMID: 32962106 DOI: 10.3390/ijms21186860
    This study investigates the separation of two heavy metals, Cd(II) and Cu(II), from the mixed synthetic feed using a liquid-liquid extraction. The current study uses tri-octyl methylammonium chloride (Aliquat 336) as the extractant (with tributyl phosphate (TBP) as a phase modifier), diluted in toluene, in order to investigate the selective extraction of Cd(II) over Cu(II) ions. We investigate the use of ethylenediaminetetraacetic acid (EDTA) as a masking agent for Cu(II), when added in aqueous feed, for the selective extraction of Cd(II). Five factors that influence the selective extraction of Cd(II) over Cu(II) (the equilibrium pH (pHeq), Aliquat 336 concentration (Aliquat 336), TBP concentration (TBP), EDTA concentration (EDTA), and organic to aqueous ratio (O:A)) were analyzed. Results from a 25-1 fractional factorial design show that Aliquat 336 significantly influenced Cd(II) extraction, whereas EDTA was statistically significant for the antagonistic effect on the E% of Cu(II) in the same system. Moreover, results from optimization experiment showed that the optimum conditions are Aliquat 336 concentration of 99.64 mM and EDTA concentration of 48.86 mM-where 95.89% of Cd(II) was extracted with the least extracted Cu(II) of 0.59%. A second-order model was fitted for optimization of Cd(II) extraction with a R2 value of 0.998, and ANOVA results revealed that the model adequately fitted the data at a 5% significance level. Interaction between Aliquat 336 and Cd(II) has been proven via FTIR qualitative analysis, whereas the addition of TBP does not affect the extraction mechanism.
    Matched MeSH terms: Liquid-Liquid Extraction/instrumentation; Liquid-Liquid Extraction/methods*
  6. Sulaiman RNR, Othman N
    J Hazard Mater, 2017 Oct 15;340:77-84.
    PMID: 28711835 DOI: 10.1016/j.jhazmat.2017.06.060
    The discharge of electroplating waste containing nickel ions has led to environmental issues owing to the toxicity problem mainly to the aquatic organisms and humans. Liquid-liquid extraction offers a great potential treatment for nickel removal with several advantages of simple, high efficiency and high separation factor. In this study, a green synergistic liquid-liquid extraction of nickel ions from electroplating waste solution using chelating oxime (LIX63) and organophosphorus (D2EHPA) carriers individually as well as their synergistic mixture has been studied. The result demonstrated that about 83% of nickel ions have been successfully extracted via the mixture system of 0.08M LIX63 +0.02M D2EHPA with the maximum synergistic enhancement factor, Rmax of 29.56. Meanwhile, the back extraction study also revealed that HNO3 was the most suitable stripping agent while the diluent screening also showed that palm oil has high potential to be incorporated as a diluent in the green synergistic liquid-liquid extraction of nickel.
    Matched MeSH terms: Liquid-Liquid Extraction
  7. Wiraagni IA, Mohd MA, Bin Abd Rashid R, Haron DEBM
    PLoS One, 2019;14(10):e0221774.
    PMID: 31581189 DOI: 10.1371/journal.pone.0221774
    The general population is exposed to bisphenol A (BPA) orally, parenterally, transdermally, and environmentally as a result of the use of BPA in food packaging, plastics, and personal care products. The majority of the population nowadays (91-99%) has detectable levels of BPA inside their body. In this study, we successfully performed an inexpensive, rapid, and simple protein precipitation procedure for extraction of BPA from human plasma, followed by analysis by LC-MS/MS. This method was specifically developed for handling large numbers of samples with minimum cost and volume of sample. The developed method was accurate, precise, and reproducible for quantification of BPA from human plasma samples in the concentration range of 10-2000 ng/mL. The method was performed on samples from 150 healthy volunteers who were enrolled in the study. The mean of observed BPA level was 2.22 ± 9.91 ng/mL. Higher BPA levels were observed for females compare to that of males (p-value = 0.002), the BPA levels were higher in participants 33 years of age and older compared to those less than 33 years of age (p-value = 0.000), then the BPA levels higher in subjects with tap water as source of drinking (p-value = 0.005). This method may be valuable for general risk assessment of BPA for a large and varied population because of its efficiency and economical aspects.
    Matched MeSH terms: Liquid-Liquid Extraction
  8. Teo CL, Idris A
    Bioresour Technol, 2014 Nov;171:477-81.
    PMID: 25201293 DOI: 10.1016/j.biortech.2014.08.024
    The types of microalgae strains and the method used in lipid extraction have become crucial factors which influence the productivity of crude oil. In this paper, Nannochloropsis sp. and Tetraselmis sp. were chosen as the strains and four different methods were used to extract the lipids: Hara and Radin, Folch, Chen and Bligh and Dyer. These methods were performed by using conventional heating and microwave irradiation methods. Results revealed that highest lipid yield from the different species was obtained using different extraction methods; both under microwave irradiation. The lipid yield for Tetraselmis sp. and Nannochloropsis sp. was highest when Hara and Radin (8.19%), and Folch (8.47%) methods were used respectively under microwave irradiation. The lipids extracted were then transesterified to biodiesel and the quality of the biodiesel was analyzed using the gas chromatography.
    Matched MeSH terms: Liquid-Liquid Extraction/methods*
  9. Mohamad Ali AS, Abdul Razak N, Ab Rahman I
    ScientificWorldJournal, 2012;2012:351967.
    PMID: 22629138 DOI: 10.1100/2012/351967
    Sorbent materials based on a hydrazone Schiff base compound, C(14)H(11)BrN(4)O(4), were prepared either by immobilizing the ligand into sol-gel (SG1) or bonding to silica (SG2). The sorbent materials were characterized by FT-IR, EDX, SEM, TEM, and TGA. The sorption characteristics of a matrix of eight transition metal ions (Ag(+), Cu(2+), Co(2+), Ni(2+), Fe(3+), Pb(2+), Zn(2+), and Mn(2+)) using batch method were studied. Several key parameters that affected the extraction efficiency such as pH, contact time, metal ions concentration, and gel size (for SGl) were investigated and optimized. Under the optimized conditions, the physically immobilized hydrazone sorbent (SG1) exhibits highest selectivity towards Ag(+) ions, while the chemically bonded hydrazone sorbent (SG2) exhibits high extraction for all metal ions tested. However, for practical applications such as the removal and preconcentration of Ag(+), the physically immobilized sorbent (SG1) is preferred.
    Matched MeSH terms: Liquid-Liquid Extraction/methods
  10. Amid M, Manap MY, Hussin M, Mustafa S
    Molecules, 2015 Jun 17;20(6):11184-201.
    PMID: 26091076 DOI: 10.3390/molecules200611184
    Lipase is one of the more important enzymes used in various industries such as the food, detergent, pharmaceutical, textile, and pulp and paper sectors. A novel aqueous two-phase system composed of surfactant and xylitol was employed for the first time to purify lipase from Cucurbita moschata. The influence of different parameters such as type and concentration of surfactants, and the composition of the surfactant/xylitol mixtures on the partitioning behavior and recovery of lipase was investigated. Moreover, the effect of system pH and crude load on the degree of purification and yield of the purified lipase were studied. The results indicated that the lipase was partitioned into the top surfactant rich phase while the impurities partitioned into the bottom xylitol-rich phase using an aqueous two phase system composed of 24% (w/w) Triton X-100 and 20% (w/w) xylitol, at 56.2% of tie line length (TLL), (TTL is one of the important parameters in this study and it is determined from a bimodal curve in which the tie-line connects two nodes on the bimodal, that represent concentration of phase components in the top and bottom phases) and a crude load of 25% (w/w) at pH 8.0. Recovery and recycling of components was also measured in each successive step process. The enzyme was successfully recovered by the proposed method with a high purification factor of 16.4 and yield of 97.4% while over 97% of the phase components were also recovered and recycled. This study demonstrated that the proposed novel aqueous two phase system method is more efficient and economical than the traditional aqueous two phase system method for the purification and recovery of the valuable enzyme lipase.
    Matched MeSH terms: Liquid-Liquid Extraction*
  11. Ahmad MN, Liew SL, Yarmo MA, Said M
    Biosci Biotechnol Biochem, 2012;76(8):1438-44.
    PMID: 22878182
    Protease is one of the most important industrial enzymes with a multitude of applications in both food and non-food sectors. Although most commercial proteases are microbial proteases, the potential of non-conventional protease sources, especially plants, should not be overlooked. In this study, horse mango (Mangifera foetida Lour) fruit, known to produce latex with a blistering effect upon contact with human skin, was chosen as a source of protease, and the effect of the extraction process on its protease activity evaluated. The crude enzyme was extracted from the kernels and extraction was optimized by a response surface methodology (RSM) using a central composite rotatable design (CCRD). The variables studied were pH (x(1)), CaCl(2) (x(2)), Triton X-100 (x(3)), and 1,4-dithryeitol (x(4)). The results obtained indicate that the quadratic model is significant for all the variables tested. Based on the RSM model generated, optimal extraction conditions were obtained at pH 6.0, 8.16 mM CaCl(2), 5.0% Triton X-100, and 10.0 mM DTT, and the estimated response was 95.5% (w/w). Verification test results showed that the difference between the calculated and the experimental protease activity value was only 2%. Based on the t-value, the effects of the variables arranged in ascending order of strength were CaCl(2) < pH < DTT < Triton X-100.
    Matched MeSH terms: Liquid-Liquid Extraction/methods*
  12. Sankaran R, Show PL, Cheng YS, Tao Y, Ao X, Nguyen TDP, et al.
    Mol Biotechnol, 2018 Oct;60(10):749-761.
    PMID: 30116991 DOI: 10.1007/s12033-018-0111-6
    Microalgae are the most promising sources of protein, which have high potential due to their high-value protein content. Conventional methods of protein harnessing required multiple steps, and they are generally complex, time consuming, and expensive. Currently, the study of integration methods for microalgae cell disruption and protein recovery process as a single-step process is attracting considerable interest. This study aims to investigate the novel approach of integration method of electrolysis and liquid biphasic flotation for protein extraction from wet biomass of Chlorella sorokiniana CY-1 and obtaining the optimal operating conditions for the protein extraction. The optimized conditions were found at 60% (v/v) of 1-propanol as top phase, 250 g/L of dipotassium hydrogen phosphate as bottom phase, crude microalgae loading of 0.1 g, air flowrate of 150 cc/min, flotation time of 10 min, voltage of 20 V and electrode's tip touching the top phase of LBEF. The protein recovery and separation efficiency after optimization were 23.4106 ± 1.2514% and 173.0870 ± 4.4752%, respectively. Comparison for LBEF with and without the aid of electric supply was also conducted, and it was found that with the aid of electrolysis, the protein recovery and separation efficiency increased compared to the LBEF without electrolysis. This novel approach minimizes the steps for overall protein recovery from microalgae, time consumption, and cost of operation, which is beneficial in bioprocessing industry.
    Matched MeSH terms: Liquid-Liquid Extraction/methods*
  13. Jajuli MN, Hussin MH, Saad B, Rahim AA, Hébrant M, Herzog G
    Anal Chem, 2019 06 04;91(11):7466-7473.
    PMID: 31050400 DOI: 10.1021/acs.analchem.9b01674
    A new sample preparation method is proposed for the extraction of pharmaceutical compounds (Metformin, Phenyl biguanide, and Phenformin) of varied hydrophilicity, dissolved in an aqueous sample. When in contact with an organic phase, an interfacial potential is imposed by the presence of an ion, tetramethylammonium (TMA+), common to each phase. The interfacial potential difference drives the transfer of ionic analytes across the interface and allows it to reach up to nearly 100% extraction efficiency and a 60-fold enrichment factor in optimized extraction conditions as determined by HPLC analysis.
    Matched MeSH terms: Liquid-Liquid Extraction*
  14. Lau HLN, Tee YS, Chan MK, Teh SS
    J Oleo Sci, 2022;71(2):177-185.
    PMID: 35110462 DOI: 10.5650/jos.ess21256
    Phosphoric acid is used in the refining of palm oil for the removal of phosphatides. The high concentration of phosphorus in solvent extracted palm-pressed mesocarp fiber oil hinders palm oil mills to recover this phytonutrients-rich residual oil in pressed fiber which typically contains 0.1 to 0.2% of total oil yield. This study aimed to refine the palm-pressed mesocarp fiber oil and determine the optimum dosage of phosphoric acid for acid-degumming of palm-pressed mesocarp fiber oil while retaining its phytonutrients. The refining process was carried out with combination of wet degumming, acid degumming, neutralisation, bleaching and deodorization. The optimum dose of phosphoric acid was identified as 0.05 wt.% by incorporating the wet degumming process. The refined palm-pressed mesocarp fiber oil showed a reduction in phosphorus content by 97% (from 901 ppm to 20 ppm) and 97% free fatty acid content removal (from 6.36% to 0.17%), while the Deterioration of Bleachability Index increased from 1.76 to 2.48, which showed an increment of 41%. The refined oil retained the key phytonutrients such as carotenoids (1,150 ppm) and vitamin E (1,540 ppm) that can be further developed into high-value products. The oil meets the quality specification of refined, bleached, and deodorized palm oil while preserving the heat-sensitive phytonutrients, which in turn provides a new resource of nutritious oil.
    Matched MeSH terms: Liquid-Liquid Extraction/methods*
  15. Amid M, Manap Y, Azmira F, Hussin M, Sarker ZI
    PMID: 25973865 DOI: 10.1016/j.jchromb.2015.04.034
    Polygalacturonase is one of the important enzymes used in various industries such as food, detergent, pharmaceutical, textile, pulp and paper. A novel liquid/liquid extraction process composed of surfactant and acetonitrile was employed for the first time to purify polygalacturonase from Durio zibethinus. The influences of different parameters such as type and concentration of surfactants, concentrations of acetonitrile and composition of surfactant/acetonitrile on partitioning behavior and recovery of polygalacturonase was investigated. Moreover, the effect of pH of system and crude load on purification fold and yield of purified polygalacturonase were studied. The results of the experiment indicated the polygalacturonase was partitioned into surfactant top rich phase with impurities being partitioned into acetonitrile bottom rich phase in the novel method of liquid/liquid process composed of 23% (w/w) Triton X-100 and 19% (w/w) acetonitrile, at 55.6% of TLL (tie line length) crude load of 25% (w/w) at pH 6.0. Recovery and recycling of components also was measured in each successive step of liquid/liquid extraction process. The enzyme was successfully recovered by the method with a high purification factor of 14.3 and yield of 97.3% while phase components were also recovered and recycled above 95%. This study demonstrated that the novel method of liquid/liquid extraction process can be used as an efficient and economical extraction method rather than the traditional methods of extraction for the purification and recovery of the valuable enzyme.
    Matched MeSH terms: Liquid-Liquid Extraction/methods*
  16. Alhelli AM, Abdul Manap MY, Mohammed AS, Mirhosseini H, Suliman E, Shad Z, et al.
    PMID: 27836491 DOI: 10.1016/j.jchromb.2016.10.037
    This report shows the partitioning and purification of alkaline extracellular lipase from Penicillium candidum (PCA 1/TT031) by solid-state fermentation (SSF). In the present analysis, some of the important parameters such as PEG concentration, PEG molecular mass, salt concentration and buffer concentration were optimised through the response surface methodology (RSM). The optimum aqueous two-phase systems (ATPS) environment consisted of 13.8% (w/w) phosphate buffer, 9.2% (w/w) PEG-3000 and 3.3% (w/w) NaCl at 25°C. The RSM approach was proved to be the most suitable methodology for the recovery of desired enzymes. In this method, the enzyme partitioned into the top phase of the PEG-buffer-NaCl ATPS. Under this experimental environment, the purification factor was found to be 33.9, the partition coefficient was 4.0 and the yield was found to be 84.0% of lipase. Moreover, the experimental and predicted results were in considerable agreement, which established the reliability and validity of the proposed model. The ATPS methodology is proven to be effective for the primary recovery of lipase at a low cost with a large loading capacity and possibility of linear scale up. In addition to using the existing methodologies for improving enzyme production, the use of statistical optimisation of the constituents of phases through RSM continues to be the basic and practical method.
    Matched MeSH terms: Liquid-Liquid Extraction/methods*
  17. Sazali NH, Alshishani A, Saad B, Chew KY, Chong MM, Miskam M
    R Soc Open Sci, 2019 Aug;6(8):190952.
    PMID: 31598260 DOI: 10.1098/rsos.190952
    In this study, salting-out assisted liquid-liquid extraction (SALLE) as a simple and efficient extraction technique followed by high-performance liquid chromatography (HPLC) was employed for the determination of vitamin D3 in milk samples. The sample treatment is based on the use of water-miscible acetonitrile as the extractant and acetonitrile phase separation under high-salt conditions. Under the optimum conditions, acetonitrile and ammonium sulfate were used as the extraction solvent and salting-out agent, respectively. The vitamin D3 extract was separated using Hypersil ODS (250x i.d 4.6 mm, 5 µm) HPLC column that was coupled with diode array detector. Vitamin D2 was used as internal standard (IS) to offset any variations in chromatographic conditions. The vitamin D3 and the IS were eluted in 18 min. Good linearity (r2 > 0.99) was obtained within the range of 25-600 ng g-1 with the limit of detection of 15 ng g-1 and limit of quantification of 25 ng g-1. The validated method was applied for the determination of vitamin D3 in milk samples. The recoveries for spiked samples were from 94.4 to 113.5%.
    Matched MeSH terms: Liquid-Liquid Extraction
  18. Vijay R, Lenin Singaravelu D, Vinod A, Sanjay MR, Siengchin S, Jawaid M, et al.
    Int J Biol Macromol, 2019 Mar 15;125:99-108.
    PMID: 30528990 DOI: 10.1016/j.ijbiomac.2018.12.056
    The aim of this study is to investigate natural cellulosic fibers extracted from Tridax procumbens plants. The obtained fibers were alkali treated for their effective usage as reinforcement in composites. The physical, chemical, crystallinity, thermal, wettability and surface characteristics were analyzed for raw, and alkali treated Tridax procumbens fibers (TPFs). The test results conclude that there was an increase in cellulose content with a reduction in hemicellulose, lignin, and wax upon alkali treatment. This enhanced the thermal stability, tensile strength, crystallinity, and surface roughness characteristics. The contact angle was also lesser for treated TPFs which prove its better wettability with the liquid phase. The Weibull distribution analysis was adopted for the analysis of the fiber diameter and tensile properties. Thus the considerable improvement in the properties of alkali treated TPFs would be worth for developing high-performance polymer composites.
    Matched MeSH terms: Liquid-Liquid Extraction
  19. Amir Rawa MS, Hassan Z, Murugaiyah V, Nogawa T, Wahab HA
    J Ethnopharmacol, 2019 Dec 05;245:112160.
    PMID: 31419500 DOI: 10.1016/j.jep.2019.112160
    ETHNOPHARMACOLOGICAL RELEVANCE: Enhancement of cholinergic functions in the brain via acetylcholinesterase inhibition is one of the main therapeutic strategies to improve symptoms associated with Alzheimer's or related cognitive deficits. There is a pathophysiological correlation between Alzheimer's and Diabetes Mellitus, as well as inflammation and oxidative stress that may cause cognitive decline.

    AIM OF THE STUDY: The present study was intended to evaluate anti-cholinesterase potential of 177 Malaysian plant extracts from 148 species known to have related ethnomedicinal uses such as anti-inflammatory, anti-oxidant, anti-diabetic, epilepsy, headache, memory enhancement and anti-aging.

    MATERIALS AND METHODS: Anti-cholinesterase screening against both acetylcholinesterase (AChE) and butyrylcholinesterase (BChE) enzymes was performed on the basis of in-vitro colorimetric 96-well microplate-based assay method. Potent active plant extracts were subjected to liquid-liquid extraction and acid-base fractionation for further analysis.

    RESULTS: Fifty-seven plant extracts exhibited potent anti-cholinesterase activities (50-100% inhibition) at 200 μg/ml. Majority of the active plants originated from Fabaceae family. Coccoloba uvifera (L.) L. stem extract manifested the lowest IC50 of 3.78 μg/ml for AChE and 5.94 μg/ml for BChE. A few native species including Tetracera indica (Christm. & Panz.) Merr., Cyrtostachys renda Blume and Ixora javanica (Blume) DC. showed cholinesterase inhibition despite limited local medical applications. Further anti-AChE evaluation (50 μg/ml) of 18 potent plant extracts harbored active polar components in butanol and water fractions, except Senna pendula (Willd.) H.S.Irwin & Barneby (leaves and stems), Acacia auriculiformis Benth. (leaves), Artocarpus altilis (Parkinson ex F.A.Zorn) Fosberg (leaves), and Macaranga tanarius (L.) Mull.Arg. (leaves) that showed inhibitory activity in less polar fractions. The acidic extraction of these four plant species improved their inhibition level against AChE.

    CONCLUSION: This study rendered a preliminary overview of anti-cholinesterase activity from diverse Malaysian botanical families in which provided the medical relevance toward these native plant species, especially ones with limited ethnobotanical record or practice.

    Matched MeSH terms: Liquid-Liquid Extraction
  20. Khoo, H.E., Chong, E.L., Sia, C.M., Chang, S.K., Yim, H.S.
    Malays J Nutr, 2014;20(1):101-111.
    MyJurnal
    Introduction: Hygrocybe conica (HC), a wild mushroom commonly consumed by the indigenous people (Orang Asli) in Peninsular Malaysia, was assessed for its antioxidant content. Methods: The HC mushroom was extracted using distilled water and the crude extract partitioned using different solvents and open column chromatography to evaluate its potential antioxidant properties. The mushroom extract was partitioned using liquid-liquid extraction into the hexane (Fl), chloroform (F2), butanol (F3) and formic acid (F4) fractions. Based on solvent polarity, the water extract of the mushroom was fractionated into non-polar (FI), semi-polar (Fii), and polar fractions (Fiii) using open column chromato­ graphy. Antioxidant capacities were determined using DPPH, ABTS, and ferric reducing antioxidant power (FRAP) assays while Folin-Ciocalteu reagent assay was used to determine total phenolic content (TPC). Results: The HC extract had the highest TPC and DPPH scavenging capacity compared to its extract fractions. TE values (ABTS assay) of F2 and F4 were not significantly higher than the HC extract. Among the extract fractions of different polarities, Fiii had the highest antioxidant capacities (DPPH and FRAP) compared to FI and Fii while FRAP values of these fractions were not significantly lower than the FRAP value of HC extract. The HC extract had significantly lower antioxidant capacity than antioxidant standards (ascorbic acid and BHA). Tannie acid as the main bioactive component in HC mushroom was detected using HPLC method. The presence of phenolics in HC extract was also confirmed using TLC. Conclusion: Due to the presence of potent phenolic components, the mycelia of HC could be consumed for potential antioxidative benefits.
    Matched MeSH terms: Liquid-Liquid Extraction
Filters
Contact Us

Please provide feedback to Administrator (afdal@afpm.org.my)

External Links