Displaying publications 1 - 20 of 312 in total

Abstract:
Sort:
  1. Singh P, Lau CSS, Siah SY, Chua KO, Ting ASY
    Arch Microbiol, 2024 Mar 22;206(4):188.
    PMID: 38519709 DOI: 10.1007/s00203-024-03895-8
    Biodegradation is an eco-friendly measure to address plastic pollution. This study screened four bacterial isolates that were capable of degrading recalcitrant polymers, i.e., low-density polyethylene, polyethylene terephthalate, and polystyrene. The unique bacterial isolates were obtained from plastic polluted environment. Dermacoccus sp. MR5 (accession no. OP592184) and Corynebacterium sp. MR10 (accession no. OP536169) from Malaysian mangroves and Bacillus sp. BS5 (accession no. OP536168) and Priestia sp. TL1 (accession no. OP536170) from a sanitary landfill. The four isolates showed a gradual increase in the microbial count and the production of laccase and esterase enzymes after 4 weeks of incubation with the polymers (independent experiment set). Bacillus sp. BS5 produced the highest laccase 15.35 ± 0.19 U/mL and showed the highest weight loss i.e., 4.84 ± 0.6% for PS. Fourier transform infrared spectroscopy analysis confirmed the formation of carbonyl and hydroxyl groups as a result of oxidation reactions by enzymes. Liquid chromatography-mass spectrometry analysis showed the oxidation of the polymers to small molecules (alcohol, ethers, and acids) assimilated by the microbes during the degradation. Field emission scanning electron microscopy showed bacterial colonization, biofilm formation, and surface erosion on the polymer surface. The result provided significant insight into enzyme activities and the potential of isolates to target more than one type of polymer for degradation.
    Matched MeSH terms: Polyethylene Terephthalates; Polyethylene/metabolism
  2. Tan E, Ong MC, Mohd Zanuri NB
    Mar Environ Res, 2023 Oct;191:106113.
    PMID: 37619477 DOI: 10.1016/j.marenvres.2023.106113
    The study examines the influence of temperature and pH on the leaching of six heavy metals (HMs) species: aluminum (Al), zinc (Zn), chromium (Cr), copper (Cu), lead (Pb) and arsenic (As) from transparent polyethylene pellets into seawater. The idea is to understand the potential influence of intensifying global warming and ocean acidification towards microplastic toxicity in the ocean. HMs leaching was obvious by 24th hours, with most HMs concentration decreased in water by 120th and 240th hours except Al. Nevertheless, we report that temperature and pH do not influence the overall HMs leaching from PE pellets with statistical analysis showing no significance (p 
    Matched MeSH terms: Polyethylene*
  3. Liu A, Chai X, Zhu S, Chin PT, He M, Xu YJ, et al.
    Int J Biol Macromol, 2023 Jul 31;244:125311.
    PMID: 37302627 DOI: 10.1016/j.ijbiomac.2023.125311
    Astaxanthin (AST) has outstanding antioxidant and anti-inflammation bioactivities, but the low biocompatibility and stability limit its application in foods. In this study, N-succinyl-chitosan (NSC)-coated AST polyethylene glycol (PEG)-liposomes were constructed to enhance the biocompatibility, stability, and intestinal-targeted migration of AST. The AST NSC/PEG-liposomes were uniform in size, had larger particles, greater encapsulation efficiency, and better storage, pH, and temperature stability than the AST PEG-liposomes. AST NSC/PEG-liposomes exerted stronger antibacterial and antioxidant activities against Escherichia coli and Staphylococcus aureus than AST PEG-liposomes. The NSC coating not only protects AST PEG-liposomes from gastric acid but also prolongs the retention and sustained release of AST NSC/PEG-liposomes depending on the intestinal pH. Moreover, caco-2 cellular uptake studies showed that AST NSC/PEG-liposomes had higher cellular uptake efficiency than AST PEG-liposomes. And AST NSC/PEG-liposomes were taken up by caco-2 cells through clathrin mediated endocytic, macrophage pathways and paracellular transport pathway. These results further proved that AST NSC/PEG-liposomes delayed the release and promoted the intestinal absorption of AST. Hence, AST PEG-liposomes coated with NSC could potentially be used as an efficient delivery system for therapeutic AST.
    Matched MeSH terms: Polyethylene Glycols/chemistry
  4. Mohd Shahminan Ibrahim, Wen, Yap Kai, Gonzalez, Maria Angela Garcia, Noor Azlin Yahya
    Ann Dent, 2020;27(1):41-49.
    MyJurnal
    This study compared the surface roughness of selected tooth coloured restorative materials that were polished according to manufacturers’ instructions and Sof-Lex. It also assessed the surface roughness of polished materials after thermocycling.Filtek Z350XT, Beautifil-Bulk Restorative and Cention N, were used in this study. A stainless steel mould (10mm diameter x 2mm height) was used to fabricate 75 cylindrical specimens: 15 Filtek Z350XT (FZ), 30 Beautifil-Bulk Restorative (BB) and 30 Cention N (CN). All 15 FZ specimens were polished with Sof-Lex. Fifteen BB and CN specimens were polished according to manufacturers’ instructions. The remaining fifteen BB and CN specimens were polished using Sof-Lex. All the specimens were subjected to thermocycling (1000 cycles). Surface roughness was assessed quantitatively with profilometry after specimen preparation (Mylar stage), polishingand thermocycling. Data were analysed using SPSS version 25.0 at α=0.05. When polished according to manufacturers’ instructions, BB had the lowest mean surface roughness (Ra) values (0.13±0.01μm) followed sequentially by CN (0.14±0.03μm) and FZ (0.15±0.02μm). The differences were not statistically significant. When polished with Sof-Lex, BB exhibited the smoothest surface (0.116±0.03μm) followed sequentially by and FZ (0.150±0.02μm) and CN (0.157±0.02μm). Thermocycling caused an increase in the Ra. The differences were statistically significant. All materials tested had Ra values below the threshold value of 0.2 μm at Mylar stage and after polishing with their recommended polishing system and Sof-Lex. Thermocycling produced rougher surfaces that did not exceed the threshold Ra value. Polishability was material dependent.
    Matched MeSH terms: Polyethylene Terephthalates
  5. Venkateskumar K, Parasuraman S, Gunasunderi R, Sureshkumar K, Nayak MM, Shah SA, et al.
    Int J Pharm Investig, 2016 Oct-Dec;6(4):194-200.
    PMID: 28123988 DOI: 10.4103/2230-973X.195925
    The objective of this study is to provide a mechanistic insight into solubility enhancement and dissolution of acyclovir (ACY) by polyethylene glycol20000 (PEG20000).
    Matched MeSH terms: Polyethylene
  6. Munjal A
    Malays Orthop J, 2018 Jul;12(2):62-64.
    PMID: 30112133 DOI: 10.5704/MOJ.1807.013
    Dislocation of meniscal bearing insert is a rare but well-recognised complication in meniscal bearing unicompartmental knee arthroplasty (UKA). On the other hand, fracture of meniscal bearing insert of phase III Oxford UKA has only been reported once in the current literature. The authors report a case of fracture and posterior dislocation of one of the fragments of the meniscal bearing insert in a mobile bearing medial UKA. The fracture was only diagnosed during the revision surgery. The posteriorly dislodged fragment was subsequently retrieved through the same skin incision and a new polyethylene insert of the same size was implanted.
    Matched MeSH terms: Polyethylene
  7. Chong EL, Ishak Ahmad, Ibrahim Abdullah, Dahlan Mohd
    Sains Malaysiana, 2011;40:1123-1127.
    Serbuk sekam padi (SP) merupakan serabut semula jadi yang boleh bertindak sebagai pengisi penguat dalam adunan getah asli termoplastik (TPNR) NR/HDPE selepas permukaan serbuk dimodifikasikan sewajarnya. Rawatan serbuk SP merangkumi pra-rawatan dengan 5% larutan natrium hidroksida (NaOH), rendaman dalam larutan getah asli cecair (LNR) dan dedahan SP tersalut LNR kepada sinaran electron (EB). Komposit TPNR/SP disediakan secara pengadunan leburan dalam pengadun dalaman pada keadaan yang telah ditentupastikan terlebih dahulu. Morfologi komposit yang dianalisis menggunakan mikroskop elektron imbasan (SEM), menunjukkan taburan zarah pengisi SP termodifikasi adalah homogen dan kewujudan interaksi matriks-zarah. Komposit terisi SP terubahsuai LNR-EB menunjukan perubahan sifat mekanik yang ketara. Nilai maksimum tegasan dan kekuatan impak adalah masing masing 6.7 MPa dan 13.2 kJ/cm2 pada dedahan 20 kGy dos EB, manakala modulus regangan adalah 79 MPa pada dos 30 kGy. Ini menunjukkan terdapat peningkatan interaksi berkesan antara-muka SP dan TPNR bagi SP terwat LNR pada dos 20-30kGy EB. Peningkatan dos EB pada SP tersalut LNR menyebabkan degradasi salutan NR dan meningkatakan interaksi antara zarah SP. Pengaglomerasian zarah SP akan berlaku dan menyebabkan serakan zarah dalam komposit menjadi tidak homogen.
    Matched MeSH terms: Polyethylene
  8. Auta HS, Abioye OP, Aransiola SA, Bala JD, Chukwuemeka VI, Hassan A, et al.
    J Environ Manage, 2022 Feb 15;304:114273.
    PMID: 34902688 DOI: 10.1016/j.jenvman.2021.114273
    In-situ bioremediation of mangrove soil contaminated with polyethylene terephthalate (PET) and polystyrene (PS) microplastics was investigated using indigenous microbial consortium with adequate capacity to degrade the plastics. Eight (8) bacteria were isolated from plastic/microplastic-inundated mangrove soil and screened for the ability to degrade PET and PS microplastics. Optical density at 600 nm and colony forming unit counts were measured to evaluate the growth response of the microbes in the presence of PS and PET microplastics at different times of exposure. Structural and surface changes that occurred post biodegradation on the microplastics were determined through EDS and SEM analysis. The obtained results demonstrated the elongation and disappearance of peaks, suggesting that the microbial consortium could modify both types of microplastics. The overall results of the microplastic degradation showed varied degrees of weight loss after 90 experimental days, with the treated plot recorded 18% weight loss. The augmented soil was increased in the concentrations of Si S, and Fe and decreased in the concentrations of C, O, Na, Mg, Al, Cl, and K after bioremediation.
    Matched MeSH terms: Polyethylene Terephthalates
  9. Soni A, Das PK, Yusuf M, Pasha AA, Irshad K, Bourchak M
    Environ Sci Pollut Res Int, 2023 Dec;30(60):124566-124584.
    PMID: 35599290 DOI: 10.1007/s11356-022-20915-6
    The usage of waste for the development of sustainable building materials has received an increasing attention in socio-eco-environment spheres. The rice husk ash (RHA) produced during burning of rice husk and the ever-increasing plastic wastes are useless causing detrimental effects on the environment. This research supports the idea of sustainability and circular economy via utilization of waste to produce value-added products. This research explores the potential of waste plastics, RHA, and silica sand as thermoplastic composite materials. The different composite samples were prepared through waste plastics which includes low- and high-density polyethylene and polypropylene with incorporation of RHA and silica sand in proportions. The study investigates the effect of filler/polymer in 30/70, 20/80, and 10/90 (wt. %) on the workability of the developed composite materials. The workability of the composites was found to improve with filler reinforcement. The experimental results showed the maximum density of 1.676 g/cm3 and mechanical strength of 26.39, 4.89, and 3.25 MPa as compressive, flexural, and tensile strengths, respectively. The minimum percentage of water absorption was 0.052%. The wear tests resulted in a minimum abrasive and sliding wear rate of 0.03759 (cm3) and 0.00692 × 10-6 kg/m. The correlations between wear mechanisms and responses were morphologically analyzed. The developed composites verify the feasibility of RHA and plastics waste as a cost effective and environmentally competent product. The results and discussions provided a direction for the future research on sustainable polymeric composite materials.
    Matched MeSH terms: Polyethylene
  10. Gew LT, Misran M
    J Biol Phys, 2017 Sep;43(3):397-414.
    PMID: 28752254 DOI: 10.1007/s10867-017-9459-2
    In this study, we address the effect of the cis-double bond in 1,2-dioleoyl-sn-glycero-3-phosphoethanolamide-N-[methoxy(polyethylene glycol)-2000, DOPE PEG2000 (DP), on the Langmuir monolayer of C18 fatty acids-namely, stearic acid (SA), oleic acid (L1), linoleic acid (L2), and linolenic acid (L3)-with the same head group but different degrees of saturation on their hydrocarbon chains. Negative values of Gibbs free energy of mixing (ΔG mix) were obtained throughout the investigated ranges of the unsaturated C18 fatty-acid (L1, L2 and L3) mixed systems, indicating that very strong attractions occurred between molecules in the monolayers. The bend and kink effects from the cis-double bond(s) in the hydrocarbon chain affected the membrane fluidity and molecular packing in the monolayers, which resulted in a greater interaction between unsaturated C18 fatty acids and DP. The most thermodynamically stable mole composition of unsaturated C18 fatty acids to DP was observed at 50:1; this ratio is suggested to be the best mole ratio and will be subsequently used to prepare DP-C18 fatty-acid nanoliposomes. The presence of cis-double bonds in both hydrocarbon chains of DOPE in DP also created an imperfection in the membrane structure of lipid-drug delivery systems, which is expected to enhance lipid-based systems for antibody conjugation and drug encapsulation.
    Matched MeSH terms: Polyethylene Glycols/chemistry*
  11. Ng HS, Kee PE, Tan GY, Yim HS, Lan JC
    Appl Biochem Biotechnol, 2020 May;191(1):273-283.
    PMID: 32335865 DOI: 10.1007/s12010-020-03284-z
    Garcinia mangostana pericarp is a good source of natural antioxidants with numerous functional properties. The conventional approaches for the recovery of antioxidants from Garcinia mangostana pericarp require long processing time and high temperature, which may cause degradation or loss of bioactivity of antioxidants, and often result in low recovery efficiency. In this study, the extraction of antioxidants from Garcinia mangostana pericarp was investigated using a polyethylene glycol (PEG)/citrate aqueous biphasic system (ABS) with the addition of surfactants. The optimum condition for the recovery of antioxidants was achieved in PEG 1000/citrate ABS of pH 8 with tie-line length (TLL) of 48.3% (w/w), volume ratio (VR) of 1.6, 0.2% (w/w) sample loading and addition of 1.0% (w/w) Tween 85. The antioxidants were recovered in the PEG-rich top phase with a high K value of 18.23 ± 0.33 and a recovery yield of 92.01% ± 0.09. The findings suggested that the addition of surfactants to polymer/salt ABS can enhance the recovery of antioxidants from Garcinia mangostana pericarps by conserving the antioxidative properties.
    Matched MeSH terms: Polyethylene Glycols/chemistry*
  12. Nik Zainuddin NAM, Abd Razak NA, Ab Karim MS
    Proc Inst Mech Eng H, 2023 Jun;237(6):741-748.
    PMID: 37131337 DOI: 10.1177/09544119231171787
    Composite materials used in the prosthetic and orthotic fields have helped improve the fabrication of sockets. Laminated sockets proved to be stronger than conventional thermoplastic sockets. The internal surface of a laminated socket plays an important role in patient comfort and is influenced by the material used to fabricate the socket. This study analyzes the internal surface profile of five different materials, that is, Dacron felt, fiberglass, Perlon stockinette, polyester stockinette, and elastic stockinette. All sockets were fabricated using an acrylic resin mix with hardener powder at a ratio of 100:3. The internal surface of the sockets was tested using the Mitutoyo SurfTest SJ-210 series for 20 trials. The overall Ra values were 2.318, 2.380, 2.682, 2.722, and 3.750 µm for fiberglass, polyester, Perlon, elastic stockinette, and Dacron felt. Dacron felt yielded the lowest Ra value, thus, producing the smoothest internal surface but requiring high skill and the correct technique during the fabrication of a laminated socket. Fiberglass is considered the best material for the internal surface despite not producing the lowest value individually but overall is the lowest and most consistent, indicating that it is easy to use to laminate prosthetic sockets.
    Matched MeSH terms: Polyethylene Terephthalates*
  13. Ng ZJ, Abbasiliasi S, Yew Joon T, Ng HS, Phapugrangkul P, Tan JS
    Prep Biochem Biotechnol, 2023;53(7):872-879.
    PMID: 36594706 DOI: 10.1080/10826068.2022.2158468
    In this work, porous glass beads grafted with polyethylene glycol (PEG) were used as an adsorbent to purify lipase from Burkholderia metallica in column chromatography. The purification parameters viz. salt stability, types and concentrations of PEG and salt, pH of the binding solution, and flow rate were studied to determine the performance of the purification system in an XK16/20 column. The crude lipase was mixed with different types and concentrations of salts 1-5% (w/w) (sodium citrate, potassium citrate, and sodium acetate) and subjected to the column containing the polymeric glass bead. One-variable-at-a-time experimentation revealed that 20% (w/w) PEG 6000 g/mol impregnated glass beads with a binding solution of 5% sodium citrate at pH 7.7, a flow rate of 1.0 mL/min and extraction time of 10 min resulted in the highest purification factor and recovery yield at 3.67 and 88%, respectively. The purified lipase has 55 ∼ 60 kDa molecular mass. The outcome of the study showed PEG could be applied to modify the inert glass beads into polymeric form, providing a biocompatible and mild separation condition for lipase. Thus, PEG could be successfully applied for the purification of lipase from B. metallica fermentation broth using column chromatography.
    Matched MeSH terms: Polyethylene Glycols/chemistry
  14. Gorajana A, Kit WW, Dua K
    Recent Pat Drug Deliv Formul, 2015;9(2):167-82.
    PMID: 25714525
    OBJECTIVE: Norfloxacin has a low aqueous solubility which leads to poor dissolution. Keeping this fact in mind the purpose of the present study is to formulate and evaluate norfloxacin solid dispersion.

    METHODS: Solid dispersions were prepared using hydrophilic carriers like polyethylene glycol (PEG) 4000, polyvinylpyrrolidone (PVP) k30 and carbopol 974pNF (CP) in various ratios using solvent evaporation technique. These formulations were evaluated using solubility studies, dissolution studies; Fourier transmitted infrared spectroscopy (FTIR), X-ray diffraction (XRD), and differential scanning calorimetery (DSC). The influence of polymer type and drug to polymer ratio on the solubility and dissolution rate of norfloxacin was also evaluated.

    RESULTS: FTIR analysis showed no interaction of all three polymers with norfloxacin. The results from XRD and DSC analyses of the solid dispersion preparations showed that norfloxacin existsin its amorphous form. Among the Norfloxacin: PEG solid dispersions, Norfloxacin: PEG 1:14 ratio showed the highest dissolution rate at pH 6.8. For norfloxacin: PVP solid dispersions, norfloxacin: PVP 1:10 ratio showed the highest dissolution rate at pH 6.8. For Norfloxacin: CP solid dispersions, norfloxacin: P 1:2 ratio showed the highest dissolution rate at pH 6.8.

    CONCLUSION: The solid dispersion of norfloxacin with polyethylene glycol (PEG) 4000, polyvinylpyrrolidone (PVP) k30 and carbopol 974p NF (CP), lends an ample credence for better therapeutic efficacy.

    Matched MeSH terms: Polyethylene Glycols/pharmacokinetics; Polyethylene Glycols/chemistry*
  15. Saleh MI, Kusrini E, Mohd Sarjidan MA, Abd Majid WH
    PMID: 21030294 DOI: 10.1016/j.saa.2010.08.029
    A mononuclear of [Eu(NO3)(Pic)(H2O)2(EO3)](Pic)·(0.73)H2O complex, where EO3=trietraethylene glycol and Pic=picrate anion, shows a red emission when used as an active layer in a single layer of ITO/EO3-Eu-Pic/Al configuration. The crystal structure of the complex consists of [Eu(NO3)(Pic)(H2O)2(EO3)]+ cation and [Pic]- anion. The Eu(III) ion is coordinated to the 10 oxygen atoms from one EO3 ligand, one Pic anion, one nitrate anion, and two water molecules. The complex is crystallized in triclinic with space group P-1. The hybrids in thin films I and II were prepared in the respective order solution concentrations of 15 and 20 mg/mL the emissive center. Comparing the photoluminescence (PL) and electroluminescence (EL) spectra, we can find that all emissions come from the characteristic transitions of the Eu(III) ion. The EL spectra of both thin films showed the occurrence of the most intense red-light emission around at 612 nm. Comparison of organic light-emitting device (OLED) current intensity characteristics as a function of voltage (I-V) show that the thin film I is better than those found for the thin film II. The thickness of the emitting layer is an important factor to control the current-voltage curve. The sharp and intense emission of the complex at low voltage indicates that the complex is a suitable and promising candidate for red-emitting materials.
    Matched MeSH terms: Polyethylene Glycols/chemical synthesis*; Polyethylene Glycols/chemistry*
  16. Abbasiliasi S, Tan JS, Ibrahim TA, Kadkhodaei S, Ng HS, Vakhshiteh F, et al.
    Food Chem, 2014 May 15;151:93-100.
    PMID: 24423507 DOI: 10.1016/j.foodchem.2013.11.019
    A polymer-salt aqueous two-phase system (ATPS) consisting of polyethylene-glycol (PEG) with sodium citrate was developed for direct recovery of a bacteriocin-like inhibitory substance (BLIS) from a culture of Pediococcus acidilactici Kp10. The influences of phase composition, tie-line length (TLL), volume ratio (VR), crude sample loading, pH and sodium chloride (NaCl) on the partition behaviour of BLIS was investigated. Under optimum conditions of ATPS, the purification of BLIS was achieved at 26.5% PEG (8000)/11% sodium citrate with a TLL of 46.38% (w/w), VR of 1.8, and 1.8% crude load at pH 7 without the presence of NaCl. BLIS from P. acidilactici Kp10 was successfully purified by the ATPS up to 8.43-fold with a yield of 81.18%. Given that the operation of ATPS is simple, environmentally friendly and cost-effective, as it requires only salts and PEG, it may have potential for industrial applications in the recovery of BLIS from fermentation broth.
    Matched MeSH terms: Polyethylene Glycols/chemistry
  17. Ahmad MB, Tay MY, Shameli K, Hussein MZ, Lim JJ
    Int J Mol Sci, 2011;12(8):4872-84.
    PMID: 21954331 DOI: 10.3390/ijms12084872
    This paper presents the green synthesis of silver nanoparticles (Ag NPs) in aqueous medium. This method was performed by reducing AgNO(3) in different stirring times of reaction at a moderate temperature using green agents, chitosan (Cts) and polyethylene glycol (PEG). In this work, silver nitrate (AgNO(3)) was used as the silver precursor while Cts and PEG were used as the solid support and polymeric stabilizer. The properties of Ag/Cts/PEG nanocomposites (NCs) were studied under different stirring times of reaction. The developed Ag/Cts/PEG NCs were then characterized by the ultraviolet-visible (UV-Vis) spectroscopy, X-ray diffraction (XRD), transmission electron microscopy (TEM), scanning electron microscopy (SEM) and Fourier transform infrared (FTIR) spectroscopy.
    Matched MeSH terms: Polyethylene Glycols/chemistry*
  18. Mumtaz T, Khan MR, Hassan MA
    Micron, 2010 Jul;41(5):430-8.
    PMID: 20207547 DOI: 10.1016/j.micron.2010.02.008
    An outdoor soil burial test was carried out to evaluate the degradation of commercially available LDPE carrier bags in natural soil for up to 2 years. Biodegradability of low density polyethylene films in soil was monitored using both optical and scanning electron microscopy (SEM). After 7-9 months of soil exposure, microbial colonization was evident on the film surface. Exposed LDPE samples exhibit progressive changes towards degradation after 17-22 months. SEM images reveal signs of degradation such as exfoliation and formation of cracks on film leading to disintegration. The possible degradation mode and consequences on the use and disposal of LDPE films is discussed.
    Matched MeSH terms: Polyethylene/metabolism*
  19. Salmiaton A, Garforth A
    Waste Manag, 2007;27(12):1891-6.
    PMID: 17084608
    Catalytic cracking of high-density polyethylene (HDPE) over fluid catalytic cracking (FCC) catalysts (1:6 ratio) was carried out using a laboratory fluidized bed reactor operating at 450 degrees C. Two fresh and two steam deactivated commercial FCC catalysts with different levels of rare earth oxide (REO) were compared as well as two used FCC catalysts (E-Cats) with different levels of metal poisoning. Also, inert microspheres (MS3) were used as a fluidizing agent to compare with thermal cracking process at BP pilot plant at Grangemouth, Scotland, which used sand as its fluidizing agent. The results of HDPE degradation in terms of yield of volatile hydrocarbon product are fresh FCC catalysts>steamed FCC catalysts approximately used FCC catalysts. The thermal cracking process using MS3 showed that at 450 degrees C, the product distribution gave 46 wt% wax, 14% hydrocarbon gases, 8% gasoline, 0.1% coke and 32% nonvolatile product. In general, the product yields from HDPE cracking showed that the level of metal contamination (nickel and vanadium) did not affect the product stream generated from polymer cracking. This study gives promising results as an alternative technique for the cracking and recycling of polymer waste.
    Matched MeSH terms: Polyethylene/chemistry*
  20. Wong, C. W., Leow, R. K. S., Lim, W. Y., Siew, Z. Z.
    MyJurnal
    The present work was undertaken to investigate the effect of different packaging materials, namely polyethylene terephthalate (PET) and aluminium laminated polyethylene (ALP) on the physicochemical properties and microbiological stability of spray-dried honey jackfruit powder over seven weeks of storage at 38 ± 2°C and 90% relative humidity. The moisture content of honey jackfruit powder packaged in PET was doubled (12.32%) than of those packaged in ALP (5.31%). The water activity (aw) of the powders were lower than 0.6 for both packaging materials, thus considered shelf-stable. Hygroscopicity increased up to 42.44 and 39.84% for powder packaged in PET and ALP, respectively. The angle of repose for powders flowability increased to 19° (ALP) and 28° (PET), which indicated that the powders flowabili- ty significantly decreased upon storage. The degree of caking for powder packaged in ALP (43.69%) was much less severe than that of PET (84.51%). Powder packaged in ALP showed good solubility (81.07 - 99.01%) and satisfactory microbiological results (< log 2.58 CFU/g). The results recommended that ALP packaging was better suited for keeping spray-dried honey jackfruit powder.
    Matched MeSH terms: Polyethylene Terephthalates; Polyethylene
Filters
Contact Us

Please provide feedback to Administrator (afdal@afpm.org.my)

External Links