Displaying publications 1 - 20 of 23 in total

Abstract:
Sort:
  1. Umar Hamzah, Yong CY, Bashillah Baharudin, Abdul Rahim Samsudin
    Analisis kimia air telah dilakukan terhadap larutan yang diekstrak dari 85 sampel tanah yang dipungut di kawasan ternakan udang harimau di Kerpan. Sampel tanah dikorek pada kedalaman 2 m bermula dari garis pantai sehingga 20 km ke arah daratan. Selain daripada tanah, air bawah tanah juga disampel dengan penggerudian yang berkedalaman 10 hingga 25 m untuk dilakukan analisis kimia air. Hasil analisis hidrokimia larutan yang diekstrasi dari sampel tanah yang diambil pada kedalaman 1-2 m menunjukkan kepekatan klorida berjulat dari 12 hingga 6500 mg/L. Berdasarkan kepekatan ion tersebut, kawasan kajian telah dibahagikan kepada beberapa zon-zon iaitu zon masin dan payau. Kepekatan pepejal terlarut yang diukur adalah dalam julat 100 hingga 40,000 mg/L dengan julat ini merangkumi zon berair segar hingga masin. Zon berair masin yang ditafsir berdasarkan kepekatan pepejal terlarut adalah dalam lingkungan 1 km dari pantai manakala berdasarkan kepekatan klorida sempadan ini adalah disekitar 4-5 km. Kehadiran air masin boleh berasal dari penerobosan langsung dari laut ataupun melalui proses air pasang-surut dimana air laut masuk melalui sungai atau terusan berhampiran ke kawasan kajian. Kehadiran air masin juga disokong oleh pertambahan kepekatan unsur-unsur seperti naterium, kalium dan kalsium ke arah laut. Berdasarkan peta taburan spatial kepekatan klorida, pola kontur kemasinan tinggi didapati mengikut bentuk kolam ternakan udang. Oleh itu besar kemungkinan pengaruh air masin adalah dari proses infiltrasi air kolam ke kawasan sekitar. Untuk melihat samada proses penerobosan juga turut memainkan peranan dalam mempengaruhi kemasinan di kawasan kajian, sampel air dari lubang gerudi pada kedalaman 10-25 meter juga turut dibuat. Sampel air yang dipam dari lubang gerudi menunjukkan kepekatan klorida dalam julat 2030 hingga 13,000 mg/L manakala kepekatan pepejal terlarut berjulat 3233 hingga 9280 mg/L. Berdasarkan nilai kepekatan klorida dan pepejal terlarut sampel air lubang gerudi, kawasan di sekitar lubang gerudi khususnya pada jarak hampir 1 km dari pantai telah tercemar dengan kesan penerobosan air laut.
    Matched MeSH terms: Propylene Glycols
  2. Uhammad Fahmi Abdul Ghani, Simon N, Goh TL, Tuan Rosli Tuan Mohamed, Abdul Ghani Rafek
    Sains Malaysiana, 2016;45:1509-1516.
    Perbukitan batu kapur di Lembah Kinta membentuk landskap muka bumi yang unik dan indah hasil daripada proses pelarutan batuan karbonat. Namun begitu, bergantung kepada kawasan perbukitan batu kapur tersebut, kehadiran pelbagai struktur geologi seperti struktur retakan dan kekar yang ekstensif mampu memberi ancaman kepada manusia dan harta benda. Kajian ini bertujuan melihat hubungan antara ketumpatan lineamen dan tahap kestabilan tujuh cerun gunung batu kapur di Lembah Kinta, Malaysia. Kajian ini terbahagi kepada dua peringkat, iaitu pemetaan ketumpatan lineamen dan penilaian kestabilan cerun dengan menggunakan kaedah Kekuatan Jasad Batuan (RMS). Sebanyak 599 lineamen rantau dikenal pasti dengan panjang keseluruhan lineamen mencapai 317 km. Seterusnya, peta ketumpatan lineamen yang dihasilkan dikelaskan kepada tiga kelas: Rendah (137.0-84.23) m, sederhana (84.22-46.83) m dan tinggi (46.82-0.0) m. Kaedah RMS yang dijalankan di lapangan pula adalah bertujuan bagi mengesahkan peta ketumpatan lineamen yang dihasilkan. Sebanyak dua belas stesen dinilai dengan tujuh parameter RMS iaitu kekuatan bahan batuan, tahap luluhawa, bukaan kekar, orientasi kekar, kelebaran kekar, ketakselanjaran dan aliran air bawah tanah. Setiap cerun yang dinilai dikelaskan kepada lima kumpulan daripada sangat lemah hingga sangat kuat. Skor RMS berdasarkan jumlah akhir setiap parameter yang dinilai. Hampir kesemua stesen yang dicerap berada pada kelas sederhana (Gunung Rapat, Datok, Kandu, Panjang, A, Tempurung) manakala hanya satu stesen (Gunung Lang) berada pada kelas lemah. Korelasi antara peta ketumpatan lineamen dan skor RMS menunjukkan korelasi yang baik dengan 73% ketepatan. Ini menunjukkan bahawa kestabilan cerun di Lembah Kinta dipengaruhi secara langsung oleh ketumpatan lineamen rantau.
    Matched MeSH terms: Propylene Glycols
  3. Kamil RN, Yusup S
    Bioresour Technol, 2010 Aug;101(15):5877-84.
    PMID: 20304636 DOI: 10.1016/j.biortech.2010.02.084
    A mathematical model describing chemical kinetics of transesterification of palm-based methyl esters with trimethylolpropane has been developed. The model was developed by utilizing nonlinear regression method, which is an efficient and powerful way to determine rate constants for both forward and reverse reactions. A comparison with previous study which excludes the reverse reactions was made. The model was based on the reverse mechanism of transesterification reactions and describes concentration changes of trimethylolpropane, monoesters and diesters production. The developed model was validated against data from the literature. The reaction rate constants were determined using MATLAB version 7.2 and the ratios of rate constants obtained were well in agreement with those reported in the literature. A good correlation between model simulations and experimental data was observed. It was proven that both methods were able to predict the rate constants with plausible accuracy.
    Matched MeSH terms: Propylene Glycols/chemistry*
  4. Nur Hakimah Asnawi, Lam KC
    Sains Malaysiana, 2016;45:1869-1877.
    Penyelidikan ini dijalankan untuk mengesan perubahan guna tanah dan litupan bumi (LULC) di daerah Gombak, Selangor melalui pendekatan penderiaan jauh. Perbandingan data siri masa antara tahun 1989-1999, 1999-2014 dan 1989-2014 telah dilakukan bagi melihat perubahan LULC. Data yang digunakan ialah imej satelit Landsat (TM dan OLI-TIRS) dan Peta Guna Tanah Selangor 1990 terbitan Jabatan Pertanian Malaysia. Guna tanah dibahagikan kepada lima kategori utama, iaitu badan air, hutan, getah, kelapa sawit dan tepu bina. Penilaian ketepatan antara LULC hasil daripada pengelasan imej penderiaan jauh dengan peta guna tanah 1990 dikira berdasarkan Koeffisien Kappa menerusi teknik ralat matrik dan nilai ketepatan adalah 74.5%. Analisis GIS ke atas imej pasca klasifikasi menunjukkan perubahan sebenar LULC bagi tahun perbandingan 1989-1999 ialah 13.69%, seterusnya meningkat kepada 18.65% bagi tahun 1999-2014 dan terus meningkat bagi tahun bandingan 1989-2014, iaitu 24.25%. Guna tanah getah mengalami perubahan sebenar paling tinggi berbanding guna tanah lain dengan -47.73% bagi tahun bandingan 1989-1999, manakala tahun bandingan 1999-2014 menunjukkan guna tanah tepu bina mengalami perubahan paling tinggi dengan +44.53% dan pada tahun 1989-2014 pula guna tanah getah mengalami perubahan sebenar paling tinggi sebanyak -34.6%. Kemerosotan guna tanah getah sangat ketara di daerah Gombak dan mempunyai kaitan dengan peningkatan kawasan guna tanah tepu bina. Secara umumnya, pola perubahan guna tanah dan litupan bumi di daerah Gombak selari dengan perkembangan dan pelaksanaan pembangunan semasa oleh pihak berkuasa.
    Matched MeSH terms: Propylene Glycols
  5. Yusri, Othman A. Karim, Khairul Nizam Abdul Maulud, Mohd. Ekhwan Toriman
    Penggunaan tanah boleh mengakibatkan perubahan fungsi dari masa ke masa, sesuai dengan tujuan pembangunan. Kawasan Bandar Pekanbaru terdiri daripada 12 sub-kawasan persekutuan dengan jumlah keluasan kira-kira 632.26 km2. Tujuan kajian adalah untuk menganalisis perubahan guna tanah daripada aspek ruang dan masa. Data guna tanah yang diambil kira dalam analisis ini adalah peta guna tanah 1992 dan 2004. Hasil analisis dengan menggunakan perisian ArcView GIS versi 3.2 mendapati bahawa telah berlaku penurunan guna tanah signifikan, iaitu jenis perkebunan dan hutan tahun 2004. Peningkatan jenis lain-lain, penggunaan tanah seperti permukiman dan tumbuhan/semak tahun 2004 telah berlaku. Perubahan ini merupakan pengaruh daripada pembangunan bandar. Sebaliknya, pembangunan bandar boleh memberi impak negatif terhadap sekitaran jika pola perubahan guna tanah dirancang tanpa pengurusan yang baik.
    Matched MeSH terms: Propylene Glycols
  6. Nuzlinda Abdul Rahman, Abdul Aziz Jemain, Kamarulzaman Ibrahim, Ahmad Mahir Razali
    Kajian ini bertujuan untuk memetakan kes kemortalan bayi mengikut daerah di Semenanjung Malaysia bagi tahun 1991 hingga 2000. Penganggaran risiko relatif berdasarkan kaedah Bayes empirik telah digunakan dalam kajian ini. Tiga kaedah penganggaran parameter dihuraikan iaitu kaedah momen, kaedah kebolehjadian maksimum dan kaedah penganggaran gabungan momen dan kebolehjadian maksimum. Keteguhan anggaran parameter yang diperoleh diuji menggunakan kaedah Bootstrap. Hasil kajian mendapati jurang antara kawasan berisiko rendah dengan kawasan berisiko tinggi adalah lebih besar pada awal dekad 2000 berbanding pada awal dekad 1990-an walaupun pada dasarnya kadar mortaliti bayi secara keseluruhannya adalah semakin berkurangan pada peringkat nasional. Kawasan pantai timur Semenanjung Malaysia masih pada takuk yang sama iaitu masih berada dalam kategori berisiko tinggi sepanjang tempoh yang dikaji. Seterusnya, gambaran terdapatnya tompokan risiko juga turut terpapar dalam peta yang dihasilkan. Berdasarkan kaedah Bootstrap, parameter-parameter yang dianggarkan dalam kajian ini adalah teguh.
    Matched MeSH terms: Propylene Glycols
  7. AUDY JR, HARRISON JL
    Med J Malaya, 1954 Mar;8(3):240-50.
    PMID: 13164694
    Matched MeSH terms: Propylene Glycols*
  8. Wafti NSA, Yunus R, Lau HLN, Yaw TCS, Aziz SA
    Bioprocess Biosyst Eng, 2021 Nov;44(11):2429-2444.
    PMID: 34269888 DOI: 10.1007/s00449-021-02615-6
    The present study reports the effects of three commercial immobilized lipases namely Novozyme 435 from Candida antarctica lipase B (CALB), Lipozyme TL IM from Thermomyces lanuginosus and Lipozyme RM IM from Rhizomucor miehei on the production of trimethylolpropane (TMP) ester from high oleic palm methyl ester (HO-PME) and TMP. The TMP ester is a promising base oil for biolubricants that are easily biodegradable and non-toxic to humans and the environment. Enzymatic catalysts are insensitive to free fatty acid (FFA) content, hence able to mitigate the side reactions and consequently reduce product separation cost. The potential of these enzymes to produce TMP ester in a solvent-free medium was screened at various reaction time (8, 23, 30 and 48 h), operating pressure (0.1, 0.3 and 1.0 mbar) and enzyme dosage (1, 3, 5 and 10% w/w). The reaction was conducted at a constant temperature of 70 °C and a molar ratio of 3.9:1 (HO-PME: TMP). Novozyme 435 produced the highest yield of TMP ester of 95.68 ± 3.60% under the following conditions: 23 h reaction time, 0.1 mbar operating pressure and 5% w/w of enzyme dosage. The key lubrication properties of the produced TMP ester are viscosity index (208 ± 2), pour point (- 30 ± - 2 °C), cloud point (- 15 ± - 2 °C), onset thermal degradation temperature (427.8 °C), and oxidation stability, RPVOT (42 ± 4 min). The properties of the TMP ester produced from the enzymatic transesterification are comparable to other vegetable oil-based biolubricants produced by chemical transesterification.
    Matched MeSH terms: Propylene Glycols/metabolism*
  9. Liu C, Wang ST, Tan CH, Lin ZE, Lee WJ
    PMID: 38422382 DOI: 10.1080/19440049.2024.2319271
    Glycidyl esters (GEs) and 3-monochloropropanediol esters (3-MCPDEs) are process contaminants commonly found in refined edible oils which are often added to infant formulas. The Taiwan Food and Drug Administration (TFDA) launched regulations for GEs in infant formulas that went into effect on 1 July 2021. To investigate levels of GEs and 3-MCPDEs in infant formula powder, 45 products were sampled and analysed during 2020-2021. The contents of GEs and 3-MCPDEs in formulas of different brands significantly varied, but their concentrations in all of the formulas complied with European Union (EU) regulations. Infant formulas containing palm oil had significantly higher 3-MCPDE levels in both extracted oils and milk powder than those without palm oil. Concentrations of GEs and 3-MCPDEs in infant formula powder and extracted oils were significantly lower in products from Europe than those from Australia and New Zealand. Infants aged 0-1 years in Taiwan who consumed only infant formula showed a margin of exposure (MoE) exceeding 25,000. Mean consumer exposures to 3-MCPDEs stayed below the tolerable daily intake (TDI), while high exposures at the 95th percentile (P95) exceeded the TDI by 1.7-fold. Herein, we present the changing trends in the risk assessment results of infant formula across various countries in the decade. Implementation of regulations and mitigation strategy effectively reduced the risk of infants being exposed to GEs and 3-MCPDEs through infant formula.
    Matched MeSH terms: Propylene Glycols*
  10. Tee ZK, Jahim JM, Tan JP, Kim BH
    Bioresour Technol, 2017 Jun;233:296-304.
    PMID: 28285221 DOI: 10.1016/j.biortech.2017.02.110
    Calcium carbonate was evaluated as a replacement for the base during the fermentation of glycerol by a highly productive strain of 1,3-propanediol (PDO), viz., Clostridium butyricum JKT37. Due to its high specific growth rate (µmax=0.53h(-1)), 40g/L of glycerol was completely converted into 19.6g/L of PDO in merely 7h of batch fermentation, leaving only acetate and butyrate as the by-products. The accumulation of these volatile fatty acids was circumvented with the addition of calcium carbonate as the pH neutraliser before the fermentation was inoculated. An optimal amount of 15g/L of calcium carbonate was statistically determined from screening with various glycerol concentrations (20-120g/L). By substituting potassium hydroxide with calcium carbonate as the pH neutraliser for fermentation in a bioreactor, a similar yield (YPDO/glycerol=0.6mol/mol) with a constant pH was achieved at the end of the fermentation.
    Matched MeSH terms: Propylene Glycols
  11. Abdul Razak Daud, Azleen Mohd. Zain, Azali Muhamad
    A single wall single image x-ray radiographic technique was adopted to investigate thickness variation of steel specimens caused by uniform corrosion. The ability of the 100 kV-160 kV x-rays to produce a meaningful film density for steel was also investigated. The thickness contour maps of corroded steel plates were found matching with the x-ray film density contour maps of the plates. The results confirm that x-ray radiography can be used to detect the thickness reduction of steel caused by uniform corrosion.
    Bagi mengesan perubahan ketebalan keluli akibat kakisan seragam maka radiografi sinar-x teknik imej tunggal dinding tunggal telah digunakan. Kemampuan sinar-x 100 kV-160 kV menghasilkan ketumpatan filem yang sesuai untuk keluli telah juga dikaji. Peta kontur ketebalan bagi spesimen kepingan keluli yang telah mengalami kakisan seragam didapati sepadan dengan peta kontur ketumpatan filem radiografi sinar-x bagi spesimen tersebut. Kajian ini menunjukkan radiografi sinar-x boleh digunakan bagi mengesan penipisan keluli akibat kakisan seragam.
    Matched MeSH terms: Propylene Glycols
  12. Yu HL, Goh CF
    Eur J Pharm Biopharm, 2024 Mar;196:114182.
    PMID: 38224756 DOI: 10.1016/j.ejpb.2024.114182
    Glycols stand out as one of the most commonly employed safe and effective excipients for pharmaceutical and cosmeceutical products. Their widespread adoption can be attributed to their exceptional solvency characteristics and their ability to interact effectively with skin lipids and keratin for permeation enhancement. Notably, propylene glycol enjoys significant popularity in this regard. Ongoing research endeavours have been dedicated to scrutinising the impact of glycols on dermal drug delivery and shedding light on the intricate mechanisms by which glycols enhance skin permeation. This review aims to mitigate the discordance within the existing literature, assemble a holistic understanding of the impact of glycols on the percutaneous absorption of active compounds and furnish the reader with a profound comprehension of the foundational facets pertaining to their skin permeation enhancement mechanisms, while simultaneously delving deeper into the intricacies of these processes.
    Matched MeSH terms: Propylene Glycols
  13. Aziz NAM, Yunus R, Hamid HA, Ghassan AAK, Omar R, Rashid U, et al.
    Sci Rep, 2020 11 12;10(1):19652.
    PMID: 33184363 DOI: 10.1038/s41598-020-76775-y
    Microwave-assisted synthesis is known to accelerate the transesterification process and address the issues associated with the conventional thermal process, such as the processing time and the energy input requirement. Herein, the effect of microwave irradiation on the transesterification of palm oil methyl ester (PME) with trimethylolpropane (TMP) was evaluated. The reaction system was investigated through five process parameters, which were reaction temperature, catalyst, time, molar ratio of TMP to PME and vacuum pressure. The yield of TMP triester at 66.9 wt.% and undesirable fatty soap at 17.4% were obtained at 130 °C, 10 mbar, sodium methoxide solution at 0.6 wt.%, 10 min reaction time and molar ratio of TMP to PME at 1:4. The transesterification of palm oil-based methyl ester to trimethylolpropane ester was 3.1 folds faster in the presence of microwave irradiation. The total energy requirement was markedly reduced as compared to the conventional heating method. The findings indicate that microwave-assisted transesterification could probably be an answer to the quest for a cheaper biodegradable biolubricant.
    Matched MeSH terms: Propylene Glycols
  14. Mohtar, A., Neefa Bibi, B., Badri, Y.
    MyJurnal
    Introduction : Mersing, a district in north-east Johore was also affected by the recent worst flood in 100 years that striked Johore. Orang Asli settlements were among the worst affected by the flood in Mersing due to their location along the river. For Kg. Peta, not only flooded, the communications as well as the access roads were also tarnished. This settlement situated very deep interior about 100 km from Mersing town and next to Endau- Rompin National Park. Besides the distance, the geography and the communication issues make the flood operation even more difficult. Even then, the welfare of this minority group was never been neglected. Our Medical and Health Teams made a move in but unfortunately were also been trapped in between the flood waves.
    Methodology : It was a qualitative finding. The data for this report were collected from various means. Some data were collected through informal interview among the staffs that being trapped, head villager and the dwellers, local head departments of government and non-government organizations. Others were from the relevant photographs, formal flood returns as well as through the observation.
    Finding : The existence of very good involvement, cooperation and coordination from various agencies was the main factor that ensures all the villagers of Kg. Peta received our services despite of many difficulties or challenges. During this disaster, no outbreak of infectious disease or death from the settlement was reported. The welfare and the needs of all who affected and those involved in the flood operation were taken care off. Therefore, we believed that without good support and cooperation from others, we will not be able to deliver our services and their welfare especially when health was concerned will be deprived. The objectives of this write up were to share our experience in managing flood in very remote area and to show the importance of good integration between agencies in disaster management.
    Matched MeSH terms: Propylene Glycols
  15. Mohsin SMN, Hasan ZAA
    Colloids Surf B Biointerfaces, 2023 Jan;221:113025.
    PMID: 36403417 DOI: 10.1016/j.colsurfb.2022.113025
    Oil-in-water (o/w) emulsion is utilized as an insecticide delivery system for mosquito control. However, evaporation inhibition adjuvant is needed to prevent fog drift, inhibit release of insecticidal actives and prolong suspension time. In the current study, we evaluated the effect of different short-chain alcohols, namely, propylene glycol, 1,3-propanediol, glycerol and crude glycerol, as adjuvants on the physicochemical properties of d-phenothrin o/w emulsion system. The bioactivity of optimized formulations containing 20 wt% glycerol (D1), 20 wt% propylene glycol (D2) and without added alcohol (negative control) were tested against larvae, pupae and adult Aedes aegypti (Ae. aegypti). It was found that propylene glycol produced smaller droplets at lower concentrations but poor long-term stability at higher concentrations, whereas glycerol had an appreciable effect on initial droplet size and stability with increasing concentration. According to the dose-response bioassays and room size chamber testing, the highest larvicidal, pupicidal and adulticidal activities were observed with D2, followed by D1 and negative control. Overall, the above study demonstrated improved emulsion stabilities and potency against Ae. aegypti larvae, pupae and adults using glycerol as adjuvant for effective mosquito control.
    Matched MeSH terms: Propylene Glycols
  16. Abidin MSZ, Matsumura R, Anisuzzaman M, Park JH, Muta S, Mahmood MR, et al.
    Materials (Basel), 2013 Nov 06;6(11):5047-5057.
    PMID: 28788375 DOI: 10.3390/ma6115047
    We report the crystallization of electrodeposited germanium (Ge) thin films on n-silicon (Si) (100) by rapid melting process. The electrodeposition was carried out in germanium (IV) chloride: propylene glycol (GeCl₄:C₃H₈O₂) electrolyte with constant current of 50 mA for 30 min. The measured Raman spectra and electron backscattering diffraction (EBSD) images show that the as-deposited Ge thin film was amorphous. The crystallization of deposited Ge was achieved by rapid thermal annealing (RTA) at 980 °C for 1 s. The EBSD images confirm that the orientations of the annealed Ge are similar to that of the Si substrate. The highly intense peak of Raman spectra at 300 cm(-1) corresponding to Ge-Ge vibration mode was observed, indicating good crystal quality of Ge. An additional sub peak near to 390 cm(-1) corresponding to the Si-Ge vibration mode was also observed, indicating the Ge-Si mixing at Ge/Si interface. Auger electron spectroscopy (AES) reveals that the intermixing depth was around 60 nm. The calculated Si fraction from Raman spectra was found to be in good agreement with the value estimated from Ge-Si equilibrium phase diagram. The proposed technique is expected to be an effective way to crystallize Ge films for various device applications as well as to create strain at the Ge-Si interface for enhancement of mobility.
    Matched MeSH terms: Propylene Glycols
  17. Sabran SF, Mohamed M, Abu Bakar MF
    PMID: 26881002 DOI: 10.1155/2016/2850845
    This study documented ethnomedical knowledge of plants used for the treatment of tuberculosis (TB) and its related symptoms as practiced by the Jakun community of Kampung Peta, situated in Endau Rompin Johor National Park, Johor, Malaysia. Eight key informants were selected by snowball sampling technique and data about medicinal plants were collected by semistructured interviews, participatory observations, and focus group. Qualitative analysis was undertaken using thematic analysis. There were 23 species of plants (22 genera, 20 families) documented and herbarium specimens were deposited at the UTHM Herbarium. Dipterocarpus sublamellatus was recorded for the first time with ethnomedical uses while other species were previously reported. The qualitative approach employed in this study demonstrates the emic perspective in terms of perceptions on traditional herbal medicine, transfer of knowledge, significant taboos related with medicinal plants, and their conservation efforts. Local and biomedical terminology in treatment of TB showed substantial correspondence. The outcomes obtained in the study are worth being further investigated for conservation strategies and are worthy of verifying their ethnomedical claims scientifically.
    Matched MeSH terms: Propylene Glycols
  18. Chang TS, Yunus R, Rashid U, Choong TS, Awang Biak DR, Syam AM
    J Oleo Sci, 2015;64(2):143-51.
    PMID: 25748374 DOI: 10.5650/jos.ess14162
    Trimethylolpropane triesters are biodegradable synthetic lubricant base oil alternative to mineral oils, polyalphaolefins and diesters. These oils can be produced from trimethylolpropane (TMP) and fatty acid methyl esters via chemical or enzymatic catalyzed synthesis methods. In the present study, a commercial palm oil derived winter grade biodiesel (ME18) was evaluated as a viable and sustainable methyl ester source for the synthesis of high oleic trimethylolpropane triesters (HO-TMPTE). ME18 has fatty acid profile containing 86.8% oleic acid, 8.7% linoleic acid with the remaining minor concentration of palmitic acid, stearic acid and linolenic acid. It's high oleic property makes it superior to produce synthetic lubricant base oil that fulfills both the good low temperature property as well as good oxidative stability. The synthetic base oil produced had a viscosity of 44.3 mm(2)/s at 40°C meeting the needs for ISO 46 oils. It also exhibited an excellent viscosity index of 219 that is higher than some other commercial brands of trimethylolpropane trioleate. Properties of base oil such as cloud point, density, acid value, demulsibility and soap content were also examined. The oil was then used in the formulation of tapping oil and appraised in term of adaptability, stability and field test performance.
    Matched MeSH terms: Propylene Glycols/chemistry*
  19. Teo KT, Hassan A, Gan SN
    Polymers (Basel), 2018 Dec 11;10(12).
    PMID: 30961299 DOI: 10.3390/polym10121374
    Palm fatty acid distillate (PFAD), is a by-product of the crude palm oil refining process. It comprises mainly of free fatty acids-around 45% palmitic and 33% oleic acids-as the major components. Ultra-violet (UV) curable urethane acrylate (UA) oligomers could be synthesized from PFAD, by the following procedure. A hydroxyl terminated macromer was first prepared by reacting PFAD with a mixture of isophthalic acid, phthalic anhydride, neopentagylcol (NPG), and pentaerythritol. The macromer was then reacted with 2-hydroxylethylacrylate (2HEA) and toluene diisocynate (TDI) to generate a resin, containing acrylate side chains for UV curable application. A series of UA resins were prepared by using 15, 25, 45, 55, and 70% of PFAD, respectively. The UA resin has Mw in the range of 3,200 to 27,000. They could be cured by UV irradiation at an intensity of 225 mW/cm². Glass transition temperature (Tg) of the cured film was measured by differential scanning calorimeter (DSC), and hardness of the film was determined by a pendulum hardness tester, according to American Society for Testing and Materials (ASTM)4366. The resins were used in a wood-coating application. All of the cured films showed good adhesion, hardness, and chemical resistance except for the one using the 70% PFAD, which did not cure properly.
    Matched MeSH terms: Propylene Glycols
  20. Nadzirah, K.Z., Zainal, S., Noriham, A., Normah, I.
    MyJurnal
    Bromelain is one of the vegetal proteases found in pineapple plant. It has numerous applications in food and pharmaceuticals. This review discussed different bromelain purification techniques which will assist in determining the effect of processing conditions on the purification efficacy. There are four purification techniques to be discussed, namely; reverse micellar system, aqueous two phase extraction, cation exchange chromatography and ammonium sulphate precipitation. Of the four techniques, cation exchange chromatography had shown the best bromelain purification technique with purification fold of 10.0 followed by reverse micellar system containing CTAB/ isooctane/ hexanol/ butanol, ATPE containing PEG polymer, ammonium sulphate precipitation and ATPE containing PEO-PPO-PEO with purification fold of 5.2, 4.0, 2.81 and 1.25, respectively.
    Matched MeSH terms: Propylene Glycols
Filters
Contact Us

Please provide feedback to Administrator (afdal@afpm.org.my)

External Links