Displaying all 10 publications

Abstract:
Sort:
  1. Qabbani AA, Razak NHA, Kawas SA, Sheikh Abdul Hamid S, Wahbi S, Samsudin AR
    J Craniofac Surg, 2017 Jun;28(4):e318-e325.
    PMID: 28230596 DOI: 10.1097/SCS.0000000000003569
    The aim of this study was to determine the efficacy of immediate implant placement with alveolar bone augmentation on socket preservation following atraumatic tooth extraction and comparing it with a tooth alveolar socket that was allowed to heal in a conventional way.Twenty medically fit patients (8 males and 12 females aged between 18 and 40 years) who needed noncomplicated tooth extraction of mandibular premolar teeth were divided randomly and equally into 2 groups. In Group I, the empty extraction socket was left untreated and allowed to heal in a conventional way. In Group II, the immediate implant was placed and the gap between the implant and the inner buccal plate surface of the socket wall was filled with lyophilized bovine bone granules and the wound was covered with pericardium membrane. The patients were followed up clinically and radiologically for regular reviews at 1 week, 3 months, and 9 months postoperative. Cone beam computerized tomography images of the alveolar ridge and socket were analyzed to determine the structural changes of the alveolar ridge. Resonance frequency analysis was measured at 9 months for Group II to assess the degree of secondary stability of the implants by using Osstell machine.A significant difference of bone resorption of 1.49 mm (confidence interval, CI 95%, 0.63-2.35) was observed within the control group at 3 months, and 1.84 mm (P ≤ 0.05) at 9 months intervals. No significant changes of bone resorption were observed in Group II. Comparison between groups showed a highly significant difference at 3 months; 2.56 mm (CI 95% 4.22-0.90) and at 9 months intervals; 3.2 mm (CI 95%, 4.70-1.62) P ≤ 0.001 between Group I and II. High resonance frequency analysis values were observed at 9 months postoperative in Group II.In conclusion, the insertion of immediate implants in fresh extraction sockets together with grafting the circumferential gap between the bony socket wall and the implant surface with bovine bone granules was able to preserve a greater amount of alveolar ridge volume when compared with an extraction socket that was left to heal in a conventional way.
    Matched MeSH terms: Tooth Socket/physiology; Tooth Socket/surgery
  2. Ananda GK, Nambiar P, Mutalik S, Shanmuhasuntharam P
    Surg Radiol Anat, 2015 Nov;37(9):1099-108.
    PMID: 25850735 DOI: 10.1007/s00276-015-1473-0
    With the advent of cone-beam computed tomography (CBCT) for maxillofacial imaging, there has been a paradigm shift from two dimensional panoramic radiography to three dimensional imaging. This study investigated the microanatomy of the maxillary permanent first molar socket and its relationship to the floor of the maxillary sinus, especially for immediate or early implant placement.
    Matched MeSH terms: Tooth Socket
  3. Kamal A, Salman B, Ar NH, Samsudin AR
    Clin Oral Investig, 2021 Mar;25(3):1029-1033.
    PMID: 32562076 DOI: 10.1007/s00784-020-03393-3
    OBJECTIVE: The aim of this study is to investigate the efficacy of delivering low-level laser therapy (LLLT) in the management of dry socket at University Dental Hospital Sharjah.

    MATERIALS AND METHOD: Forty-five patients with dry socket were divided into two treatment groups. Group I dry socket patients (n = 30) received conventional treatment while group II patients (n = 15) were irradiated with LLLT at a setting of 200-mW, 6-J, continuous-wave mode using an R02 tipless handpiece (Fotona Er:YAG, Europe), on the buccal, lingual, and middle surfaces of the socket for 30 s from a delivery distance of 1 cm. Pain score and quantification of granulation tissue in the socket were recorded at 0, 4, and 7 days post-dry socket treatment.

    RESULTS: Results showed that the LLLT-irradiated group II sockets showed a much lower VAS pain score of 1-2 as early as day 4, and a richer amount of granulation tissue compared to the conventional treated group I socket. The amount and rate of granulation tissue formation in the dry socket are inversely proportional to the pain score showing significant clinical effectiveness of LLLT on promoting the healing of the dry socket, with improvement in symptoms (P = .001). Conventionally treated dry sockets take at least 7 days to match the effective healing of an LLLT-irradiated dry socket.

    CONCLUSION: LLLT irradiation influences biomodulation of dry socket healing by dampening inflammation, promoting vascularization, stimulating granulation, and controlling pain symptoms.

    CLINICAL RELEVANCE: LLLT may be an additional effective tool for managing dry sockets in general dental practice.

    Matched MeSH terms: Tooth Socket
  4. Alam MK, Alfawzan AA, Haque S, Mok PL, Marya A, Venugopal A, et al.
    Front Pediatr, 2021;9:651951.
    PMID: 34026687 DOI: 10.3389/fped.2021.651951
    To investigate whether the craniofacial sagittal jaw relationship in patients with non-syndromic cleft differed from non-cleft (NC) individuals by artificial intelligence (A.I.)-driven lateral cephalometric (Late. Ceph.) analysis. The study group comprised 123 subjects with different types of clefts including 29 = BCLP (bilateral cleft lip and palate), 41 = UCLP (unilateral cleft lip and palate), 9 = UCLA (unilateral cleft lip and alveolus), 13 = UCL (unilateral cleft lip) and NC = 31. The mean age was 14.77 years. SNA, SNB, ANB angle and Wits appraisal was measured in lateral cephalogram using a new innovative A.I driven Webceph software. Two-way ANOVA and multiple-comparison statistics tests were applied to see the differences between gender and among different types of clefts vs. NC individuals. A significant decrease (p < 0.005) in SNA, ANB, Wits appraisal was observed in different types of clefts vs. NC individuals. SNB (p > 0.005) showed insignificant variables in relation to type of clefts. No significant difference was also found in terms of gender in relation to any type of clefts and NC group. The present study advocates a decrease in sagittal development (SNA, ANB and Wits appraisal) in different types of cleft compared to NC individuals.
    Matched MeSH terms: Tooth Socket
  5. Kattimani VS, Prathigudupu RS, Jairaj A, Khader MA, Rajeev K, Khader AA
    J Contemp Dent Pract, 2019 Aug 01;20(8):987-993.
    PMID: 31797859
    Since a long time, the preservation of the socket is emphasized for various reasons. Many studies have suggested the ridge preservation through socket grafting using various bone graft substitute materials (GSMs). But none of the studies suggested the material of choice for the grafting. So, the systematic review was planned to analyze the outcomes of synthetic hydroxyapatite (SHA) graft material for socket preservation. The review was aimed to determine the existing evidence for the use of SHA GSM for grafting and its usefulness.

    MATERIALS AND METHODS: The literature search was performed for the studies published in the English language independently by all four authors (search team) in the Medline database through the PubMed search engine for the past 5 years. The study involved predetermined inclusion and exclusion criteria for the search. The final lists of clinical trials were analyzed to determine the existing evidence and suggested the mechanism of action.

    REVIEW RESULTS: The search resulted in 117 titles. After application of inclusion and exclusion criteria, a total of seven studies were found eligible for this systematic review. Out of seven, two studies were found eligible for meta-analysis whereas remaining included for the systematic review.

    CONCLUSION: The meta-analysis favors socket grafting compared to control in terms of preservation of existing bone height and width. The SHA grafting showed successful bone regeneration with less connective tissue component. The histomorphometric evaluation showed a good bone regeneration associated with SHA than xenograft. Within the limitations of this meta-analysis, the synthetic GSM can be used for socket grafting.

    CLINICAL SIGNIFICANCE: In the wake of increasing graft materials in the market and different origin raw material sources for the preparation of graft materials, clinicians are in dilemma for selection and its use. The success of grafting depends on the selection of appropriate material with a suitable calcium/phosphate (Ca/P) ratio. The review provided available evidence for the use of SHA.

    Matched MeSH terms: Tooth Socket
  6. Al Qabbani A, Al Kawas S, A Razak NH, Al Bayatti SW, Enezei HH, Samsudin AR, et al.
    J Craniofac Surg, 2018 Mar;29(2):e203-e209.
    PMID: 29303859 DOI: 10.1097/SCS.0000000000004263
    INTRODUCTION: Alveolar bone is critical in supporting natural teeth, dental implants as well as a removable and fixed prosthesis. Alveolar bone volume diminishes when its associated natural tooth is lost.

    OBJECTIVE: The aim of this study is to evaluate the effectiveness of bovine bone granules on alveolar bone socket augmentation for ridge preservation following atraumatic tooth extraction.

    MATERIALS AND METHODS: Twenty medically fit patients (12 males and 8 females aged between 18 and 40 years) who needed noncomplicated tooth extraction of 1 mandibular premolar tooth were divided randomly and equally into 2 groups. In control group I, the empty extraction socket was left untreated and allowed to heal in a conventional way. In group II, the empty extraction socket wound was filled with lyophilized bovine bone xenograft granules 0.25 to 1 mm of size, 1 mL/vial. A resorbable pericardium membrane was placed to cover the defect. Clinical and 3-dimensional radiological assessments were performed at day 0, 3 months, and 9 months postoperative.

    RESULTS: There were no clinical differences in general wound healing between the groups. Comparisons within the groups showed a significant difference of bone resorption of 1.49 mm (95% confidence interval, 0.63-2.35) at 3 months, and further resorption of 1.84 mm (P ≤ 0.05) at 9 months in the control group. No significant changes of bone resorption were observed in group II during the same time interval. Comparison between groups showed a significant difference of bone resorption at 3 and 9 months (2.40 and 2.88 mm, respectively).

    CONCLUSION: The use of lyophilized demineralized bovine bone granules in socket preservation to fill in the extraction socket seems essential in preserving the alveolar bone dimension as it showed excellent soft and hard tissue healing. This study concludes that the alveolar bone socket exhibited a dynamic process of resorption from the first day of tooth extraction. Evidence shows the possibility of using bovine bone granules routinely in socket volume preservation techniques following tooth extraction.

    Matched MeSH terms: Tooth Socket/surgery*
  7. Sultan T, Cheah CW, Ibrahim NB, Asif MK, Vaithilingam RD
    J Dent, 2020 Oct;101:103455.
    PMID: 32828845 DOI: 10.1016/j.jdent.2020.103455
    OBJECTIVES: This clinical study assessed and compared the linear and volumetric changes of extraction sockets grafted with a combination of Platelet-Rich Fibrin (PRF) and Calcium Sulfate (CS) (PRF-CS), and extraction sockets grafted with a combination of PRF and xenograft (X) (PRF-X).

    METHODS: Five single maxillary premolar extraction sockets received PRF-CS grafts and five single maxillary premolar sockets received PRF-X grafts. Linear (horizontal and vertical) measurements were accomplished using Cone Beam Computed Tomography (CBCT) images and volumetric changes were assessed using MIMICS software. Soft tissue level changes were measured using Stonecast models. All measurements were recorded at baseline (before extraction) and at 5-months post-extraction.

    RESULTS: Significant reduction in vertical and horizontal dimensions were observed in both groups except for distal bone height (DBH = 0.44 ± 0.45 mm, p = 0.09) and palatal bone height (PBH = 0.39 ± 0.34 mm, p = 0.06) in PRF-X group. PRF-CS group demonstrated mean horizontal shrinkage of 1.27 ± 0.82 mm (p = 0.02), when compared with PRF-X group (1.40 ± 0.85 mm, p = 0.02). Vertical resorption for mesial bone height (MBH = 0.56 ± 0.25 mm, p = 0.008), buccal bone height (BBH = 1.62 ± 0.91 mm, p = 0.01) and palatal bone height (PBH = 1.39 ± 0.87 mm, p = 0.02) in PRF-CS group was more than resorption in PRF-X group (MBH = 0.28 ± 0.14 mm, p = 0.01, BBH = 0.63 ± 0.39 mm, p = 0.02 and PBH = 0.39 ± 0.34 mm, p = 0.06). Volumetric bone resorption was significant within both groups (PRF-CS = 168.33 ± 63.68 mm3, p = 0.004; PRF-X = 102.88 ± 32.93 mm3, p = 0.002), though not significant (p = 0.08) when compared between groups. In PRF-X group, the distal soft tissue level (DSH = 1.00 ± 0.50 mm, p = 0.03) demonstrated almost 2 times more reduction when compared with PRF-CS group (DSH = 1.00 ± 1.00 mm, 0.08). The reduction of the buccal soft tissue level was pronounced in PRF-CS group (BSH = 2.00 ± 2.00 mm, p = 0.06) when compared with PRF-X group (BSH = 1.00 ± 1.50 mm, p = 0.05).

    CONCLUSIONS: PRF-CS grafted sites showed no significant difference with PRF-X grafted sites in linear and volumetric dimensional changes and might show clinical benefits for socket augmentation. The study is officially registered with ClinicalTrials.gov Registration (NCT03851289).

    Matched MeSH terms: Tooth Socket
  8. Al-Obaidi MM, Al-Bayaty FH, Al Batran R, Hassandarvish P, Rouhollahi E
    Arch Oral Biol, 2014 Sep;59(9):987-99.
    PMID: 24952163 DOI: 10.1016/j.archoralbio.2014.06.001
    This study has attempted to evaluate the effects of ellagic acid (EA) on alveolar bone healing after tooth extraction in rats.
    Matched MeSH terms: Tooth Socket/drug effects*
  9. Younis L, Taher A, Abu-Hassan MI, Tin O
    J Contemp Dent Pract, 2009;10(4):35-42.
    PMID: 19575052
    The purpose of this study was to compare bone healing and coronal bone remodeling following both immediate and delayed placement of titanium dental implants in extraction sockets.
    Matched MeSH terms: Tooth Socket/surgery*
  10. Ahmad Azlina, Berahim Zurairah, Sidek Mohamad Ros, Mokhtar Khairani Idah, Samsudin Abdul Rani
    MyJurnal
    Mitochondrial DNA (mtDNA) is a hereditary material located in mitochondria and is normally maternally inherited. Mutational analysis performed on mtDNA proved that the mutations are closely related with a number of genetic illnesses, besides being exploitable for forensic identification. Those findings imply the importance of mtDNA in the scientific field. MtDNA can be found in abundance in tooth dentin where it is kept protected by the enamel, the hardest outer part of the tooth. In this study, two techniques of mtDNA extraction were compared to determine the efficacy between the two techniques. Teeth used for the study was collected from Dental Clinic, Hospital Universiti Sains Malaysia. After the removal of tooth from the tooth socket of the patient, the tooth was kept at -20C until use. Later, pulp tissue and enamel was excised using dental bur and only the root dentin was utilized for the isolation of mtDNA by crushing it mechanically into powdered form. MtDNA was extracted using the two published methods, Pfeifer and Budowle and then subjected to spectrophotometry DNA quantification and purity, Polymerase chain reaction (PCR) amplification of hypervariable-two region of mtDNA, followed by DNA sequencing to analyze the reliability of the extraction techniques. In conclusion, both techniques proved to be efficient and capable for the extraction of mtDNA from tooth dentin.
    Matched MeSH terms: Tooth Socket
Related Terms
Filters
Contact Us

Please provide feedback to Administrator (afdal@afpm.org.my)

External Links