Displaying publications 1 - 20 of 82 in total

Abstract:
Sort:
  1. Safaei Khorram M, Zhang G, Fatemi A, Kiefer R, Mahmood A, Jafarnia S, et al.
    Environ Sci Pollut Res Int, 2020 May;27(15):18510-18520.
    PMID: 32198685 DOI: 10.1007/s11356-020-08335-w
    The introduction of biochar has been extensively tested under short-term greenhouse or field studies mainly in sandy or acidic soils, while its effects on soil properties, crop plants, and weed species especially in neutral or alkaline soils are still not well understood. Therefore, this study focused on relatively long effects of two walnut shell biochars (5 t ha-1) on soil nutrient dynamics, two crop plants (wheat and lentil) growth and developments, and weed growth dynamics over 4 years (2014-2017). Applied biochar added once at the beginning of the experiment while planted crops were supplied with macro-nutrients and sprayed with pesticides according to conventional requirements of the region. Biochars improved soil properties by 10-23% during the first and second years while positive effects of biochars on weed growth were drastically higher (60-78% higher weed density) during the whole period of this study most likely due to increase in bioavailability of nutrient shortly after biochar amendment and indirect positive effects of biochars on soil physical properties as well. Consequently, biochar macro- and micro-nutrient will be utilized by weed plants with higher efficacy compared with crop plants.
    Matched MeSH terms: Soil Pollutants/analysis*
  2. Tao W, Mei C, Hamzah N
    J Contam Hydrol, 2020 May;231:103620.
    PMID: 32126294 DOI: 10.1016/j.jconhyd.2020.103620
    Surfactant solutions have been frequently studied for soil remediation. However, since they are expensive, massive consumption of surfactant solution can constrain their application. Surfactant microbubbles, or colloidal gas aphrons (CGAs), can serve as cost effective alternatives of surfactant solution because the use of CGAs reduce the amount of surfactant consumption. Moreover, CGAs can also improve the contact with the contaminated environment due to their unique surface properties, e.g. containing 40-70% of gas, small size, large interfacial areas, water-like flow properties and buoyant rise velocities. In this review paper, the properties and flow character of CGAs in soil matrix reviewed due to their relevance to soil remediation process. A comprehensive overview of the application of CGAs in flushing off organic pollutants and heavy metals, and carrying oxygen, bacteria and dissolved materials for soil remediation were provided. This paper also highlighted the limitation of CGAs application and important future research scopes.
    Matched MeSH terms: Soil Pollutants/analysis*
  3. Saleh S, Ahmad K, Mohd Yunus NZ, Hezmi MA
    Environ Sci Pollut Res Int, 2020 Jun;27(17):21252-21259.
    PMID: 32266626 DOI: 10.1007/s11356-020-08549-y
    In civil engineering, many geotechnical and forensic projects employ polyurethane (PU) for ground improvement, and the results have shown to be effective in terms of time and cost savings. However, similar to many other chemical stabilisers, the use of PU for soil stabilisation may have environmental repercussions. Therefore, this paper utilised a toxicity characteristic leaching procedure (TCLP) to investigate the potential for ground contamination resulting from the application of PU for the stabilisation of marine clay. Furthermore, the hazardousness of PU during the stabilisation of marine clay was investigated by testing its reactivity, ignitability, corrosivity and physical properties. The results reveal that the quantity of heavy metals present in PU is far below the regulatory limits. The results further confirm that PU is odourless and non-corrosive and that it is non-cyanide and non-sulphide-bearing. However, PU is capable of igniting. Overall, the potential application of PU for ground improvement is promising due to its environmental friendliness.
    Matched MeSH terms: Soil Pollutants/analysis*
  4. Zhao X, Kim SK, Zhu W, Kannan N, Li D
    Chemosphere, 2015 Jan;119:289-294.
    PMID: 25036943 DOI: 10.1016/j.chemosphere.2014.06.005
    The Changbai (also known as "Baekdu") Mountain, on the border between China and North Korea, is the highest mountain (2750 m) in northeastern China. Recently, this mountain region has experienced a dramatic increase in air pollution, not only because of increasing volumes of tourism-derived traffic but also because of the long-range transport of polluted westerly winds passing through major industrial and urban cities in the eastern region of China. To assess the relative importance of the two sources of pollution, 16 polycyclic aromatic hydrocarbons (PAHs) as model substances were determined in the mountain soil. A total of 32 soil samples were collected from different sides of the mountain at different latitudes between July and August of 2009. The ∑PAH concentrations were within the range 38.5-190.1 ng g(-1) on the northern side, 117.7-443.6 ng g(-1) on the southern side, and 75.3-437.3 ng g(-1) on the western side. A progressive increase in the level of ∑PAHs with latitude was observed on the southern and western sides that face the westerly wind with abundant precipitation. However, a similar concentration gradient was not observed on the northern side that receives less rain and is on the leeward direction of the wind. The high-molecular-weight PAH compounds were predominant in the soils on the southern and western sides, while low-molecular-weight PAHs dominated the northern side soils. These findings show that the distribution of PAHs in the mountain soil is strongly influenced by the atmospheric long-range transport and cold trapping.
    Matched MeSH terms: Soil Pollutants/analysis*
  5. Muhamad H, Ismail BS, Sameni M, Mat N
    Environ Monit Assess, 2011 May;176(1-4):43-50.
    PMID: 20582739 DOI: 10.1007/s10661-010-1565-6
    The adsorption equilibrium time and effects of pH and concentration of (14)C-labeled paraquat (1,1(')-dimethyl-4,4(')-bipyridylium dichloride) in two types of Malaysian soil were investigated. The soils used in the study were clay loam and clay soils from rice fields. Equilibrium studies of paraquat in a soil and pesticide solution were conducted. Adsorption equilibrium time was achieved within 2 h for both soil types. The amount of (14)C-labeled paraquat adsorbed onto glass surfaces increased with increasing shaking time and remained constant after 10 h. It was found that paraquat adsorbed by the two soils was very similar: 51.73 (clay loam) and 51.59 μ g g(-1) (clay) at 1 μ g/ml. The adsorption of paraquat onto both types of soil was higher at high pH, and adsorption decreased with decreasing pH. At pH 11, the amounts of (14)C-labeled paraquat adsorbed onto the clay loam and clay soil samples were 4.08 and 4.05 μ g g(-1), respectively, whereas at pH 2, the amounts adsorbed were 3.72 and 3.57 μ g g(-1), respectively. Results also suggested that paraquat sorption by soil is concentration dependent.
    Matched MeSH terms: Soil Pollutants/analysis*
  6. Khairiah J, Lim KH, Ahmad-Mahir R, Ismail BS
    Bull Environ Contam Toxicol, 2006 Oct;77(4):608-15.
    PMID: 17123022 DOI: 10.1007/s00128-006-1106-8
    Matched MeSH terms: Soil Pollutants/analysis*
  7. Ong GH, Yap CK, Maziah M, Suhaimi H, Tan SG
    Environ Monit Assess, 2013 Apr;185(4):3243-54.
    PMID: 22821327 DOI: 10.1007/s10661-012-2787-6
    The first objective of this study was to provide data of arsenic (As) levels in Peninsular Malaysia based on soil samples and accumulation of As in Centella asiatica collected from 12 sampling sites in Peninsular Malaysia. The second objective was to assess the accumulation of As in transplanted C. asiatica between control and semi-polluted or polluted sites. Four sites were selected which were UPM (clean site), Balakong (semi-polluted site), Seri Kembangan (semi-polluted site) and Juru (polluted site). The As concentrations of plant and soil samples were determined by Instrumental Neutron Activation Analysis. The As levels ranged from 9.38 to 57.05 μg/g dw in soils, 0.21 to 4.33 μg/g dw in leaves, 0.18 to 1.83 μg/g dw in stems and 1.32-20.76 μg/g dw in roots. All sampling sites had As levels exceeding the CCME guideline (12 μg/g dw) except for Kelantan, P. Pauh, and Senawang with P. Klang having the highest As in soil (57.05 μg/g dw). In C. asiatica, As accumulation was highest in roots followed by leaves and stems. When the As level in soils were higher, the uptake of As in plants would also be increased. After the transplantation of plants to semi-polluted and polluted sites for 3 weeks, all concentration factors were greater than 50 % of the initial As level. The elimination factor was around 39 % when the plants were transplanted back to the clean sites for 3 weeks. The findings of the present study indicated that the leaves, stems and roots of C. asiatica are ideal biomonitors of As contamination. The present data results the most comprehensive data obtained on As levels in Malaysia.
    Matched MeSH terms: Soil Pollutants/analysis*
  8. Lau EV, Gan S, Ng HK
    Bull Environ Contam Toxicol, 2012 May;88(5):741-6.
    PMID: 22297628 DOI: 10.1007/s00128-012-0527-9
    The concentrations of polycyclic aromatic hydrocarbons (PAHs) in soil samples were measured at five different sites within Klang Valley, Malaysia. The results showed that the total concentrations of the fourteen priority PAHs ranged from 64 to 155 μg/kg. Irrespective of the land use, all the measured soil PAH concentrations in this study were significantly lower than that found in soil samples in temperate regions. The profile of PAHs in the soils was dominated by the LMW PAHs. The PAHs in Klang Valley soils originated from pyrogenic sources, with a combination of petroleum and biomass combustion in vehicles, industries and non-point sources.
    Matched MeSH terms: Soil Pollutants/analysis*
  9. Suratman S, Hang HC, Shazili NA, Mohd Tahir N
    Bull Environ Contam Toxicol, 2009 Jan;82(1):16-9.
    PMID: 18665317 DOI: 10.1007/s00128-008-9507-5
    This paper presents a preliminary result carried out in the Besut River basin, Terengganu, Malaysia to determine the selected trace metal concentrations. Concentrations of dissolved Pb, Cu, and Fe during the present study were in the range of 3.3-8.3 microg/L Pb, 0.1-0.3 microg/L Cu, and 1.1-12.3 microg/L Fe. For the particulate fraction concentrations of Pb, Cu, and Fe ranged from 1.0 to 3.6 microg/L, 0.3 to 2.8 microg/L, and 114 to 1,537 microg/L, respectively. The concentrations of metals in this study area, in general, were lower than those reported for other study areas. Higher metal concentrations measured in the wet monsoon season suggest that the input was mainly due to terrestrial runoff.
    Matched MeSH terms: Soil Pollutants/analysis*
  10. Farahani GH, Sahid IB, Zakaria Z, Kuntom A, Omar D
    Bull Environ Contam Toxicol, 2008 Sep;81(3):294-8.
    PMID: 18587522 DOI: 10.1007/s00128-008-9468-8
    The downward movement of carbofuran in two Malaysian soil types was studied using soil columns. The columns were filled with disturbed and undisturbed soils of either the Bagan Datoh soil (clay) or the Labu soil (sandy clay). The average total percentage of carbofuran in the leachate of the undisturbed Labu soil after 14 days of watering (80.8%) was approximately similar to that of the total amount from the disturbed soil (81.4%). However, carbofuran leaching was observed in the disturbed soil after the fourth day of watering whereas for the undisturbed soil, leaching occurred after the first watering. A similar trend was observed in the Bagan Datoh soil where the residue of carbofuran was detected after the first day of watering in the undisturbed soil column but only at the eighth day of watering in the disturbed soil column. The total percentage carbofuran in the leachate of disturbed and undisturbed soil columns from Bagan Datoh after 14 days of watering was 3.6% and 41.7%, respectively. The study showed that less leaching occurred in soil columns with high organic content such as the Bagan Datoh soil and especially so in disturbed soils where the organic matter was homogeneously mixed in all layers.
    Matched MeSH terms: Soil Pollutants/analysis*
  11. Halimah M, Tan YA, Ismail BS
    J Environ Sci Health B, 2004;39(5-6):765-77.
    PMID: 15620085
    Four methods were developed for the analysis of fluroxypyr in soil samples from oil palm plantations. The first method involved the extraction of the herbicide with 0.05 M NaOH in methanol followed by purification using acid base partition. The concentrated material was subjected to derivatization and then cleaning process using a florisil column and finally analyzed by gas chromatography (GC) equipped with electron capture detector (ECD). By this method, the recovery of fluroxypyr from the spiked soil ranged from 70 to 104% with the minimum detection limit at 5 microg/kg. The second method involved solid liquid extraction of fluroxypyr using a horizontal shaker followed by quantification using high performance liquid chromatography (HPLC) equipped with UV detector. The recovery of fluroxypyr using this method, ranged from 80 to 120% when the soil was spiked with fluroxypyr at 0.1-0.2 microg/g soil. In the third method, the recovery of fluroxypyr was determined by solid liquid extraction using an ultrasonic bath. The recovery of fluroxypyr at spiking levels of 4-50 microg/L ranged from 88 to 98% with relative standard deviations of 3.0-5.8% with a minimum detection limit of 4 microg/kg. In the fourth method, fluroxypyr was extracted using the solid liquid extraction method followed by the cleaning up step with OASIS HLB (polyvinyl dibenzene). The recovery of fluroxypyr was between 91 and 95% with relative standard deviations of 4.2-6.2%, respectively. The limit of detection in method 4 was further improved to 1 pg/kg. When the weight of soil used was increased 4 fold, the recovery of fluroxypyr at spiking level of 1-50 microg/kg ranged from 82-107% with relative standard deviations of 0.5-4.7%.
    Matched MeSH terms: Soil Pollutants/analysis*
  12. Ismail BS, Farihah K, Khairiah J
    Bull Environ Contam Toxicol, 2005 Feb;74(2):320-7.
    PMID: 15841973
    Matched MeSH terms: Soil Pollutants/analysis*
  13. Cui J, Zhou J, Peng Y, Chan A, Mao J
    Environ Sci Process Impacts, 2015 Dec;17(12):2082-91.
    PMID: 26515781 DOI: 10.1039/c5em00383k
    A detailed study on the solution chemistry of red soil in South China is presented. Data are collected from two simulated column-leaching experiments with an improved setup to evaluate the effects of atmospheric N deposition (ADN) composition and ADN flux on agricultural soil acidification using a (15)N tracer technique and an in situ soil solution sampler. The results show that solution pH values decline regardless of the increase of the NH4(+)/NO3(-) ratio in the ADN composition or ADN flux, while exchangeable Al(3+), Ca(2+), Mg(2+), and K(+) concentrations increase at different soil depths (20, 40, and 60 cm). Compared with the control, ADN (60 kg per ha per year N, NH4(+)/NO3(-) ratio of 2 : 1) decreases solution pH values, increases solution concentrations of NO3(-)-N, Al(3+), Ca(2+) and Mg(2+) at the middle and lower soil depths, and promotes their removal. NH4(+)-N was not detected in red soil solutions of all the three soil layers, which might be attributed to effects of nitrification, absorption and fixation in farmland red soil. Some of the NO3(-)-N concentrations at 40-60 cm soil depth exceed the safe drinking level of 10 mg L(-1), especially when the ADN flux is beyond 60 kg ha(-1) N. These features are critical for understanding the ADN agro-ecological effects, and for future assessment of ecological critical loads of ADN in red soil farmlands.
    Matched MeSH terms: Soil Pollutants/analysis*
  14. Teh TL, Rahman NN, Shahadat M, Wong YS, Syakir MI, Omar AK
    Environ Monit Assess, 2016 Jul;188(7):404.
    PMID: 27295186 DOI: 10.1007/s10661-016-5394-0
    The present study deals with possible contamination of the soil by metal ions which have been affecting the environment. The concentrations of metal ions in 14 borehole samples were studied using the ICP-OES standard method. The degree of contamination was determined on the basis of single element pollution index (SEPI), combined pollution index (CPI), soil enrichment factor (SEF), and geo-accumulation index (Igeo). Geo-accumulation indices and contamination factors indicated moderate to strong contaminations for eight boreholes (BL-1, BL-2, BL-6, BL-8, BL-9, BL-10, BL-12, and BL-13) while the rest were extremely contaminated. Among all the boreholes, BL-3 and BL-11 demonstrated the highest level of Cd(II) and Pb(II) which were found the most polluted sites. The level of metal contamination was also compared with other countries. The development, variation, and limitations regarding the regulations of soil and groundwater contamination can be provided as a helpful guidance for the risk assessment of metal ions in developing countries.
    Matched MeSH terms: Soil Pollutants/analysis*
  15. Omar NA, Praveena SM, Aris AZ, Hashim Z
    Food Chem, 2015 Dec 1;188:46-50.
    PMID: 26041162 DOI: 10.1016/j.foodchem.2015.04.087
    Little is known about the bioavailability of heavy metal contamination and its health risks after rice ingestion. This study aimed to determine bioavailability of heavy metal (As, Cd, Cu, Cr, Co, Al, Fe, Zn and Pb) concentrations in cooked rice and human Health Risk Assessment (HRA). The results found Zn was the highest (4.3±0.1 mg/kg), whereas As showed the lowest (0.015±0.001 mg/kg) bioavailability of heavy metal concentration in 22 varieties of cooked rice. For single heavy metal exposure, no potential of non carcinogenic health risks was found, while carcinogenic health risks were found only for As. Combined heavy metal exposures found that total Hazard Quotient (HQtotal) values for adult were higher than the acceptable range (HQTotal<1), whereas total Lifetime Cancer Risk (LCRTotal) values were higher than the acceptable range (LCRTotal values >1×10(-4)) for both adult and children. This study is done to understand that the inclusion of bioavailability heavy metal into HRA produces a more realistic estimation of human heavy metal exposure.
    Matched MeSH terms: Soil Pollutants/analysis
  16. Abdullah AR, Sinnakkannu S, Tahir NM
    Bull Environ Contam Toxicol, 2001 Jun;66(6):762-9.
    PMID: 11353379
    Matched MeSH terms: Soil Pollutants/analysis*
  17. Ismail BS, Quirinus L
    Bull Environ Contam Toxicol, 2000 Oct;65(4):530-6.
    PMID: 10960146
    Matched MeSH terms: Soil Pollutants/analysis*
  18. Sahid IB, Teoh SS
    Bull Environ Contam Toxicol, 1994 Feb;52(2):226-30.
    PMID: 8123982
    Matched MeSH terms: Soil Pollutants/analysis*
  19. Ismail BS, Ngan CK, Cheah UB, Abdullah WY
    Bull Environ Contam Toxicol, 2004 Apr;72(4):836-43.
    PMID: 15200001 DOI: 10.1007/s00128-004-0320-5
    Matched MeSH terms: Soil Pollutants/analysis*
  20. Ahmad A, Sreedhar Reddy S, Rumana G
    Int J Phytoremediation, 2019;21(5):471-478.
    PMID: 30648407 DOI: 10.1080/15226514.2018.1537243
    To assess the tolerance, the rye-grass L. grown on soil amended with petroleum wastewater (PWW) containing four metals lead, zinc, nickel and mercury. The PWW (25 to 50%) showed remarkable increase in length and biomass. Chlorophyll 'a and b' increased with an increase of PWW from 25-50% while such contents decreased on increasing the 75-100% compared to control. The mass balance performed on the system showed the removal of 90-97.6% lead, 85.5-92.9% zinc, 78.9-85.5% nickle and 47.6-27.5% mercury. The model for the maximum metal reduction rate (Rmax) was much better for Pb (89.5) and Zn (72.1) with respect to Ni (57.3) and Hg (32.4). Survival of rye-grass (30-days, statics, and renewal exposures) was increased by 50% as compared to control. The toxicity index Y of PWW showed 0-25% deficiency level, 25-50% tolerance level, 50-90% toxic level and 90-100% lethal level. The experimental data showing high correlation coefficient (R2 = 0.98).
    Matched MeSH terms: Soil Pollutants/analysis*
Filters
Contact Us

Please provide feedback to Administrator (afdal@afpm.org.my)

External Links