Many studies have shown that sulfur-containing compounds significantly affect the solubility of carbon dioxide (CO2) in adsorption processes. However, limited attention has been devoted to incorporating organic fillers containing sulfur atoms into gas separation membrane matrices. This study addressed the gap by developing a new membrane using a polysulfone (PSf) polymer matrix and polyphenylene sulfide (PPs) filler material. This membrane could be used to separate mixtures of H2/CH4 and CO2/CH4 gases. Our study investigated the impact of various PPs loadings (1%, 5%, and 10% w/w) relative to PSf on membrane properties and gas separation efficiency. Comprehensive characterization techniques, including Fourier-transform infrared spectroscopy (FTIR), X-ray diffraction (XRD), and scanning electron microscopy (SEM), were employed to understand how adding PPs and coating with polydimethylsiloxane (PDMS) changed the structure of our membranes. XRD and FTIR analysis revealed distinct morphological disparities and functional groups between pure PSf and PSf/PPs composite membranes. SEM results show an even distribution of PPs on the membrane surface. The impact of adding PPs on gas separation was significant. CO2 permeability increased by 376.19%, and H2 permeability improved by 191.25%. The membrane's gas selection ability significantly improved after coating the surface with PDMS. CO2/CH4 separation increased by 255.06% and H2/CH4 separation by 179.44%. We also considered the Findex to assess the overall performance of the membrane. The 5% and 10% PPs membranes were exceptional. Adding PPs to membrane technology may greatly enhance gas separation processes.
This research involved carrying out a unique micro-mesoporous carbon particle incorporation into P84 co-polyimide membrane for improved gas separation performance. The carbon filler was prepared using a hard template method from zeolite and known as zeolite-templated carbon (ZTC). This research aims to study the loading amount of ZTC into P84 co-polyimide toward the gas separation performance. The ZTC was prepared using simple impregnation method of sucrose into hard template of zeolite Y. The SEM result showing a dispersed ZTC particle on the membrane surface and cross-section. The pore size distribution (PSD) of ZTC revealed that the particle consists of two characteristics of micro and mesoporous region. It was noted that with only 0.5 wt% of ZTC addition, the permeability was boosted up from 4.68 to 7.06 and from 8.95 to 13.15 barrer, for CO2 and H2 respectively when compared with the neat membrane. On the other hand, the optimum loading was at 1 wt%, where the membrane received thermal stability boost of 10% along with the 62.4 and 35% of selectivity boost of CO2/CH4 and H2/CH4, respectively. It was noted that the position of the filler on the membrane surface was significantly affecting the gas transport mechanism of the membrane. Overall, the results demonstrated that the addition of ZTC with proper filler position is a potential candidate to be applicable in the gas separation involving CO2 and H2.
Hydrogen (H2) has become one of the promising alternative clean energy resources. Membrane technology is a potential method for hydrogen separation or production. This study aims to develop a new carbon membrane for hydrogen separation or production. Moreover, the permeation behavior of H2, CO2, and CH4 through a hollow fiber composite carbon membrane derived from P84 co-polyimide and with incorporation of zeolite composite carbon (ZCC) was also examined. ZCC was synthesized via the impregnation method of sucrose into zeolite-Y pores, followed by carbonization at 800 °C. Thus, this filler has a high surface area, high microporosity, ordered pore structure, and low hydrophilicity. The presence of zeolites in ZCC is predicted to increase certain gases' affinity for the membrane. Various heating rates (1-5 °C/min) were applied during pyrolysis to understand the effect of the heating rate on the pore structure and H2/CO2 and H2/CH4 gas separation performance. Moreover, gas permeation was evaluated at various temperatures (298-373 K) to study the thermodynamic aspect of the process. A characteristic graphite peak was detected at 2θ ∼ 44° in all carbon samples. Scanning electron microscopy (SEM) observations revealed the void-free surface and the asymmetric structure of the carbon membranes. During the permeation test, it was found that gas permeation through the membrane was significantly affected by the temperature of the separation process. The highest permeability of H2, CO2, and CH4 was detected on the composite carbon membrane at a 3 °C/min heating rate with a permeation temperature of 373 K. The thermodynamic study shows that CO2 and H2 have lower activation energies compared to CH4. The transport mechanism of the membrane involved adsorption and activated surface diffusion. The permeation temperature has a large impact on the transport of small penetrants in the carbon matrix.
The fracture risk assessment tool (FRAX(®)) has been developed for the identification of individuals with high risk of fracture in whom treatment to prevent fractures would be appropriate. FRAX models are not yet available for all countries or ethnicities, but surrogate models can be used within regions with similar fracture risk. The International Society for Clinical Densitometry (ISCD) and International Osteoporosis Foundation (IOF) are nonprofit multidisciplinary international professional organizations. Their visions are to advance the awareness, education, prevention, and treatment of osteoporosis. In November 2010, the IOF/ISCD FRAX initiative was held in Bucharest, bringing together international experts to review and create evidence-based official positions guiding clinicians for the practical use of FRAX. A consensus meeting of the Asia-Pacific (AP) Panel of the ISCD recently reviewed the most current Official Positions of the Joint Official Positions of ISCD and IOF on FRAX in view of the different population characteristics and health standards in the AP regions. The reviewed position statements included not only the key spectrum of positions but also unique concerns in AP regions.