The present investigation focuses in investigating the effect of osmotic pressure, gelling on the mean droplet diameter, polydispersity index, droplet size stability of the developed novel Aspirin containing water-in-oil-in-water (W/O/W) nano multiple emulsion. The aspirin-loaded nano multiple emulsion formulation was successfully generated using two-stage ultrasonic cavitational emulsification which had been reported in author's previous study. The osmotic behavior of ultrasonically prepared nano multiple emulsions were also examined with different glucose concentrations both in the inner and outer aqueous phases. In addition, introducing gelatin into the formulation also observed to play an important role in preventing the interdroplet coalescence via the formation of interfacial rigid film. Detailed studies were also made on the possible mechanisms of water migration under osmotic gradient which primarily caused by the permeation of glucose. Besides, the experimental results have shown that the interfacial tension between the two immiscible phases decreases with varying the composition of organic phase. Although the W/O/W emulsion prepared with the inner/outer glucose weight ratio of 1-0.5% (w/w) showed an excellent droplet stability, the formulation containing 0.5% (w/w) glucose in the inner aqueous phase appeared to be the most stable with minimum change in the mean droplet size upon one-week storage period. Based on the optimization, nano multiple emulsion droplets with the mean droplet diameter of around 400 nm were produced using 1.25% (w/w) Span 80 and 0.5% Cremophore EL. Overall, our investigation makes a pathway in proving that the use of ultrasound cavitation is an efficient yet promising approach in the generation of stable and uniform nano multiple emulsions and could be used in the encapsulation of various active pharmaceutical ingredients in the near future.
In the present study, response surface methodology (RSM) based on central composite design (CCD) was employed to investigate the influence of main emulsion composition variables, namely drug loading, oil content, emulsifier content as well as the effect of the ultrasonic operating parameters such as pre-mixing time, ultrasonic amplitude, and irradiation time on the properties of aspirin-loaded nanoemulsions. The two main emulsion properties studied as response variables were: mean droplet size and polydispersity index. The ultimate goal of the present work was to determine the optimum level of the six independent variables in which an optimal aspirin nanoemulsion with desirable properties could be produced. The response surface analysis results clearly showed that the variability of two responses could be depicted as a linear function of the content of main emulsion compositions and ultrasonic processing variables. In the present investigation, it is evidently shown that ultrasound cavitation is a powerful yet promising approach in the controlled production of aspirin nanoemulsions with smaller average droplet size in a range of 200-300 nm and with a polydispersity index (PDI) of about 0.30. This study proved that the use of low frequency ultrasound is of considerable importance in the controlled production of pharmaceutical nanoemulsions in the drug delivery system.
Agricultural waste obtained from Elaeis guineensis mid ribs can provide a veritable source of materials which can be used as precursor materials for the production of pharmaceutical grade activated charcoal. The pore size and surface morphology of activated charcoal defines the types of molecules that could be adsorbed unto it, as surface morphology plays a significant role in determining the surface availability and areas of adsorption. The activated charcoal samples prepared from Elaeis guineensis via either physical or chemical activation was characterized via surface area using the BET method and subsequently pore structure and size analyzed by scanning electron microscopy (SEM). Physically activated Elaeis guineensis fronds activated with nitrogen gas had wide spread microporosity with micropore volume of 0.232 cc/g compared to the chemically activated with 1M and 3M phosphoric acid respectively. The commercial activated charcoal/metronidazole combination in the in vitro-pharmacodynamic model reflected no re-growth after 4 hours, however for charcoal formulated from Elaeis guineensis via chemical activation with 3M phosphoric acid and metronidazole no regrowth was seen at the second hour and this was maintained throughout the duration of the experiment. Increased macroporosity enhanced bacterial adsorption and this was further facilitated by the presence of antibacterial metronidazole in the in vitro pharmacodynamic model. Activated charcoal produced from agricultural waste obtained from Elaeis guineensis dried mid ribs consisting of increased macroporosity with mixed meso/micro porosity and antibacterial metronidazole form the best model for bacterial adsorption and will be useful in the treatment of diarrhea caused by E. coli O157:H7.