We demonstrate the generation of multiple Brillouin Stokes lines generation assisted by Rayleigh scattering in Raman fiber laser. The linear cavity is utilized to take advantage of the Rayleigh scattering effect, and it also produces two strong spectral peaks at 1555 and 1565nm. Under a strong pumping condition, the Rayleigh backscatters contribute to the oscillation efficiency, which increases the Brillouin Stokes lines intensity between these two wavelength ranges. The multiple Stokes lines get stronger by suppressing the buildup of free-running longitudinal modes in the laser structure.
We report experimental results demonstrating the variation of optical signal-to-noise ratio (OSNR) of laser lines in Brillouin-Raman fiber laser against Raman pump power (RPP) variation. The reduction of OSNR is attributed to the spectral broadening of laser lines depending on the RPP. The spectral broadening is owing to the effect of the interaction between laser lines and turbulent waves (nonlinear interaction between longitudinal cavity modes). In our experiment, the worst OSNR is obtained at 650 mW RPP as a result of maximum spectral broadening when the Brillouin pump wavelength is fixed at 1555 nm. On the other hand, the OSNR improvement is obtained for RPP beyond 650 mW due to the effect of red-shift, the Raman peak gain is shifted away from the laser lines generated around 1555 nm thus reduces the spectral broadening effect.
We demonstrate an enhanced architecture of Brillouin-Erbium fiber laser utilizing the reverse-S-shaped fiber section as the coupling mechanism. The enhancement is made by locating a common section of Erbium-doped fiber next to the single-mode fiber to amplify the Brillouin pumps and the oscillating Stokes lines. The requirement of having two Erbium gain sections to enhance the multiple Brillouin Stokes lines generation is neglected by the proposed fiber laser structure. The mode competitions arise from the self-lasing cavity modes of the fiber laser are efficiently suppressed by the stronger pre-amplified Brillouin pump power before entering the single mode fiber section. The maximum output power of 20 mW is obtained from the proposed fiber laser with 10 laser lines that equally separated by 0.089 nm spacing.