We demonstrate a tunable multi-wavelength Brillouin-Raman fiber laser with 20 GHz wavelength spacing. The setup is arranged in a linear cavity by employing 7.2 and 11 km dispersion compensating fibers (DCF) in addition to a 30 cm Bismuth-oxide erbium doped fiber. In this experiment, for the purpose of increasing the Stokes lines, it is necessary to optimize Raman pump power and Brillouin pump power together with its corresponding wavelengths. At the specific Brillouin pump wavelength, it is found that the longer length of 11 km DCF with optimized parameters results in larger number of Stokes combs and optical signal to noise ratios (OSNRs). In this case, a total of 195 Brillouin Stokes combs are produced across 28 nm bandwidth at Brillouin pump power of -2 dBm and Raman pump power of 1000 mW. In addition, all Brillouin Stokes signals exhibit an average OSNR of 26 dB.
We report an ultra-long Raman laser that implemented a variable pumping scheme in backward and forward configurations. Rayleigh backscattering effects were realized in the 51 km fiber length that functioned as a virtual mirror at one fiber end. With the employment of a fiber Bragg grating that has a peak reflection wavelength at 1553.3 nm, spectral broadening effects were observed. These occurred as the pump power level was diverted more to the forward direction. Owing to this fact, a maximum width of 0.9 nm was measured at 100% forward pumping. The obtained results show that the efficient exploitation of four-wave mixing interactions as well as strong Rayleigh backscattering are beneficial to influence the lasing performances. Both of these nonlinear responses can be adjusted by varying pumping distributions along the fiber longitudinal dimension.