In the present study, high-methoxyl pectin (HMP) was extracted from Hylocereus polyrhizus peel's using physico-chemical process. In addition, the hypolipidemic activity of HMP was investigated at different concentration and time corresponding to its adsorption ability. FTIR and contact angle analysis were used to determine the sorbent characterization. A high degree of esterification (63.8%) and the contact angle (95.5°) confirmed hydrophobic nature and resulting bad wetting of the HMP extract, respectively. The methoxyl content in the pectin acted as an affinity-precursor of the pectin towards cholesterol due to its increased hydrophobicity. The maximum equilibrium uptake capacity of cholesterol of 370.5mg/g (0.96mmol/g) was observed by HMP. The experimental data showed good fitting for Freundlich isotherm equation and followed pseudo-first-order kinetic model with a correlation coefficient (R2) of 0.89-0.97 due to physisorption mechanism. Intra-particle model confirmed that the cholesterol sorption rate by HMP was significantly influenced by external mass transfer (surface diffusion) and intra-particle diffusion (diffusion control). It was also revealed that the HMP extracted from Hylocereus polyrhizus peels possess a high affinity towards cholesterol, making it an ideal hypolipidemic agent.
The effect of physicochemical treatment on pectin yield, degree of esterification, along with the kinetics and thermodynamics characteristics was investigated in the present study. Several extraction parameters were observed to have impacted the yield and degree of esterification significantly, and the best extraction condition was as follows: agitation rate of 250 rpm, temperature of 70 °C, extraction time of 120 min, pH 2, and liquid to solid ratio of 10 v/w which has resulted in 28.20% of pectin yield, with DE (degree of esterification) of 57.00%. A theoretical model which describes the extractability, dissolution and degradation rate of pectin to predict the maximal yield at the maximal time was established to study the extraction kinetics of pectin from HPP. The kinetic analysis from Panchev's model shows the extraction rate was found highest at LSR 10 with ymax 30.85%. The calculated activation energy for pectin dissolution and degradation was found to be 4.532 kJ/mol and 28.054 kJ/mol, respectively. The thermodynamic study has suggested that the process was endothermic, spontaneous and reversible. These results suggest that the physical and chemical treatment applied could be an efficient technique for the extraction of pectin from Hylocereus polyrhizus peels.