Fabrication of pristine Mn2O3 and Ag-Mn2O3 composite thin films by AACVD for photoelectrochemical water splitting

Pristine Mn2O3 and Ag-Mn2O3 composite thin films have been developed on fluorine doped tin oxide (FTO) coated glass substrates at 450 °C by aerosol assisted chemical vapor deposition (AACVD) using a methanol solution of a 1 : 2 mixture of acetatoargentate(i), Ag(CH3COO), and a newly synthesized manganese complex, [Mn(dmae)2(TFA)4] (1) (dmae = N,N-dimethylaminoethanolate, TFA = trifluoroacetate). The phase purity and stoichiometric composition of the films were investigated by X-ray diffraction (XRD) and Raman spectroscopy techniques. Energy dispersive X-ray (EDX) and X-ray photoelectron spectroscopy (XPS) analyses revealed a Ag to Mn ratio of 1 : 2 and further confirmed the uniform dispersion of Ag nanoparticles into the Mn2O3 structure. Optical studies showed a direct band gap of 2.0 eV for the pristine Mn2O3 film that was lowered to 1.8 eV for Ag-Mn2O3 due to the plasmonic interaction of Ag with Mn2O3. The Ag-Mn2O3 composite film displayed enhanced photocatalytic activity in photoelectrochemical (PEC) water splitting and yielded a photocurrent of 3 mA cm(-2) at 0.7 V versus Ag/AgCl which was 1.6 times higher than a pristine Mn2O3 film alone, under AM 1.5 G illumination (100 mW cm(-2)). The high PEC efficiency is mainly due to the plasmonic effect of Ag nanoparticles, which enhances the visible light absorption, efficient electron-hole separation and high carrier mobility of the Ag-Mn2O3 photoelectrode. The charge carrier density of Ag-Mn2O3 is two times higher than the pristine Mn2O3 as calculated by the Mott-Schottky plot. Based on the PEC studies a mechanism is proposed to elucidate the high activity of Ag-Mn2O3 in PEC water splitting.