Displaying all 4 publications

Abstract:
Sort:
  1. Akter A, Goto M, Megat Mohd Noor MJ, Parvez A, Khanam S, Bakar Siddique MA, et al.
    RSC Adv, 2023 Apr 03;13(16):10610-10620.
    PMID: 37025665 DOI: 10.1039/d3ra00595j
    Tannery sludge, heavy metals (HMs) enriched hazardous solid waste, is produced extensively in many regions of the world. Even though the sludge is hazardous, it can be considered a material resource, if organic matter and HMs in the sludge can be stabilized to minimize its negative environmental impacts. This research aimed to evaluate the efficacy of using subcritical water (SCW) treatment for tannery sludge treatment through immobilization and thus reduction of HMs to mitigate their potential environmental risk and toxicity. HMs in the tannery sludge were analyzed by inductively coupled plasma mass spectrometry (ICP-MS) and the average concentration of HMs (mg kg-1) was found in the following decreasing order of Cr (12 950) > Fe (1265) > Cu (76) > Mn (44) > Zn (36) > Pb (14) with very high Cr concentration. The result of toxicity characteristics leaching procedure and sequential extraction procedure tests revealed that the raw tannery sludge leachate contained 11.24 mg L-1 Cr, which classified the raw tannery sludge into a very high-risk category. After SCW treatment, the concentration of Cr in leachate was reduced to 1.6 mg L-1 indicating risk reduction to a low-risk category. The eco-toxicity levels of other HMs also decreased considerably after SCW treatment. X-ray diffractometry (XRD) and scanning electron microscopy (SEM) analysis were employed to identify the effective immobilizing substances formed in the SCW treatment process. The favorable formation of immobilizing orthorhombic tobermorite (Ca5Si6O16(OH)2·4H2O) at 240 °C in the SCW treatment process was confirmed by XRD and SEM analysis. The results confirmed that the formation of 11 Å tobermorite is capable of strongly immobilizing HMs in the SCW treatment process. Further, both orthorhombic 11 Å tobermorite and 9 Å tobermorite were successfully synthesized by SCW treatment on a mixture of tannery sludge including rice husk silica and Ca(OH)2 with water under rather mild conditions. Hence, it can be concluded that SCW treatment of tannery sludge with supplementary silica from rice husk can effectively immobilize the HMs and significantly reduce their environmental risk through tobermorite formation.
  2. Chompa SS, Zuan ATK, Amin AM, Hun TG, Ghazali AHA, Sadeq BM, et al.
    Int Microbiol, 2023 Aug 31.
    PMID: 37651053 DOI: 10.1007/s10123-023-00423-4
    Soil salinity in rice cultivation areas is considered a severely limiting factor that adversely affects the quantity and quality of rice production in wetlands. Recently, the alternative use of salt-tolerant plant growth-promoting rhizobacteria (PGPR) inhabiting extreme saline conditions has gained remarkable attention and had positive effects on soil and crops. Therefore, a study has been initiated to develop a liquid biofertilizer formulation from locally isolated multi-strain salt-tolerant PGPR strains such as Bacillus tequilensis and Bacillus aryabhattai, using glycerol (5 mM), trehalose (10 mM), and polyvinylpyrrolidone (PVP) at 1% as additives to prolong the shelf-life of the bacteria. After 3 months of incubation, the bacterial population in the trehalose-supplemented mixed strain was highest at 9.73×107 CFU/mL, followed by UPMRE6 and UPMRB9 at 9.40×107 CFU/mL and 8.50×107 CFU/mL respectively. The results showed that the optimal trehalose concentration successfully prolonged the shelf-life of bacteria with minimal cell loss. Validation of quadratic optimization by response surface methodology revealed that the cell density of the mixed strain was 4.278×107 log CFU/mL after 24 h. The precision ratio was 99.7% higher than the predicted value in the minimized medium formulation: 0.267 g/mL trehalose, 1% glycerol, at 120 rpm agitation using the data analysis tools of Design Expert software. The population study confirmed the better and longer survival of salt-tolerant PGPR fortified with 10 mM trehalose, which was considered the best liquid biofertilizer formulation. Moreover, the optimized trehalose-glycerol liquid formulation can be used commercially as it is cost-effective.
  3. Chompa SS, Zuan ATK, Amin AM, Hun TG, Ghazali AHA, Sadeq BM, et al.
    Int Microbiol, 2024 Jan 03.
    PMID: 38172302 DOI: 10.1007/s10123-023-00469-4
    Soil salinity has been one of the significant barriers to improving rice production and quality. According to reports, Bacillus spp. can be utilized to boost plant development in saline soil, although the molecular mechanisms behind the interaction of microbes towards salt stress are not fully known. Variations in rice plant protein expression in response to salt stress and plant growth-promoting rhizobacteria (PGPR) inoculations were investigated using a proteomic method and sodium dodecyl sulfate-polyacrylamide gel electrophoresis (SDS-PAGE). Findings revealed that 54 salt-responsive proteins were identified by mass spectrometry analysis (LC-MS/MS) with the Bacillus spp. interaction, and the proteins were functionally classified as gene ontology. The initial study showed that all proteins were labeled by mass spectrometry analysis (LC-MS/MS) with Bacillus spp. interaction; the proteins were functionally classified into six groups. Approximately 18 identified proteins (up-regulated, 13; down-regulated, 5) were involved in the photosynthetic process. An increase in the expression of eight up-regulated and two down-regulated proteins in protein synthesis known as chaperones, such as the 60 kDa chaperonin, the 70 kDa heat shock protein BIP, and calreticulin, was involved in rice plant stress tolerance. Several proteins involved in protein metabolism and signaling pathways also experienced significant changes in their expression. The results revealed that phytohormones regulated the manifestation of various chaperones and protein abundance and that protein synthesis played a significant role in regulating salt stress. This study also described how chaperones regulate rice salt stress, their different subcellular localizations, and the activity of chaperones.
  4. Algin S, Banik D, Rahman SA, Mahmud Tusher S, Tuj Johora F, Akter A, et al.
    Cureus, 2024 Apr;16(4):e57877.
    PMID: 38596207 DOI: 10.7759/cureus.57877
    Treatment of resistant obsessive-compulsive disorder (OCD) typically results in insufficient symptom alleviation, and even long-term medication often fails to have the intended effect. Ketamine is a potent non-competitive antagonist of the N-methyl-D-aspartate (NMDA) receptor. Studies have shown that low-dose ketamine infusion results in a considerable reduction in obsessive-compulsive symptoms and a rapid resolution of suicidal ideation. This is a case report on the effect of intravenous ketamine infusion on a patient with resistant OCD and severe suicidal ideation. Intravenous (IV) ketamine was given once a week over consecutive three weeks with necessary precautions. Psychometric tools such as the Yale-Brown Obsessive Compulsive Scale (Y-BOCS), the Clinical Global Impressions Scale (CGI-S), the Beck Scale for Suicidal Ideations (BSSI), and Depression Anxiety and Stress Scale 21 (DASS-21) were applied before and after infusions. Obsessive-compulsive symptoms and suicidal severity started to decrease rapidly after the first infusion. However, after a transient improvement, these symptoms again began to increase after a stressful incident on the second day of the first infusion. All the symptoms measured by validated rating scales showed continued improvement after the following two infusions. The improvement was sustained until discharge (one week after the last infusion) and subsequent follow-up in the sixth and 12th weeks. The role of ketamine in reducing suicidal thoughts and behavior is already established. Very few studies emphasized its effectiveness in improving severe/resistant obsessive-compulsive symptoms. This pioneering work may offer scope for similar research in the relevant field.
Related Terms
Filters
Contact Us

Please provide feedback to Administrator (afdal@afpm.org.my)

External Links