Increased disposal of heavy metals, including lead (II) (Pb(II)) into the environment calls for a reliable and sustainable solution. In this study, nano-sized biochar from sago activated sludge was proposed for the removal of Pb(II). Sago activated sludge was pyrolysed in a tube furnace followed by a chemical activation to yield nano-sized particles ranging from 45 to 75 nm. The nano-sized biochar obtained was characterised and the influence of pH (2 – 10), initial Pb(II) concentration (1 – 5 mg/L), contact time (30 – 90 mins) and adsorbent dosage (0.1 – 0.5 g) was investigated in a batch adsorption study. Response surface methodology (RSM) approach with central composite design (CCD) was used as statistical tools to optimize the adsorption process by relating the mutual interactions among all studied variables. Characterisation of the prepared adsorbent showed that large surface area was observed on sludge activated carbon (78.863 m2 /g) compared with sludge biochar (8.044 m2 /g) and sludge biomass (1.303 m2 /g). The batch adsorption best fitted the Langmuir isotherm (maximum adsorption capacity, Q0 = 3.202 × 10-3 mg/g, R-squared value = 0.9308). The RSM indicated that the optimum Pb(II) removal (99.87%) was at 0.5 g of adsorbent, 5 mg/L initial concentration and 30 min contact time. This study is significant because utilisation of sago effluent will reduce sago manufacturing waste by conversion into a value-added product as adsorbent to adsorb Pb(II) in wastewater.
Oil pollution remains a serious concern especially in Malaysia. Many strategies have been employed to overcome oil pollution. In this research, sago waste material abundantly found in Sarawak was used and chemically modified into an oil adsorbent . Sago waste cellulosic residues were modified using fatty acid derivatives. The capability of the chemically modified sago waste to absorb oil from aqueous solution was studied and compared with the untreated sago waste. The modified sago waste showed higher hydrophobicity than the untreated sago waste, implying that it is less affinity for water and also an excellent affinity for oil. This chemically modified sago waste would be the most suitable for applications where engine oil (i.e., Shell Helix HX5) is to be removed from an aqueous environment. The modified sago waste selectively absorbs the oil and remains on the surface and is to be removed when the application is complete.