Displaying all 8 publications

Abstract:
Sort:
  1. Azizan NA, Basaruddin KS, Salleh AF
    Appl Bionics Biomech, 2018;2018:5156348.
    PMID: 30116295 DOI: 10.1155/2018/5156348
    Various studies have examined body posture stability, including postural sway and associated biomechanical parameters, to assess the severity effects of leg length discrepancy (LLD). However, various viewpoints have been articulated on the results of these studies because of certain drawbacks in the comprehensive analysis of the effect of variations in LLD magnitude. Therefore, this systematic review was performed to help focus on the current findings to help identify which biomechanical parameters are most relevant, commonly used, and able to distinguish and/or have specific clinical relevance to the effect of variations in LLD magnitude during static (standing) and dynamic (walking) conditions. Several electronic databases containing studies from the year 1983 to 2016 (Scopus, ScienceDirect, PubMed, PMC, and ProQuest) were obtained in our literature search. The search process yielded 22 published articles that fulfilled our criteria. We found most of the published data that we analyzed to be inconsistent, and very little data was obtained on the correlation between LLD severity and changes in body posture stability during standing and walking. However, the results of the present review study are in line with previous observational studies, which describe asymmetry in the lower limbs corresponding to biomechanical parameters such as gait kinematics, kinetics, and other parameters described during static (standing) postural balance. In future investigations, we believe that it might be useful to use and exploit other balance-related factors that may potentially influence body posture stability.
  2. Wahid W, Ahmad Fahmi NA, Mohd Salleh AF, Mohd Yasin '
    Respir Med Case Rep, 2019;28:100939.
    PMID: 31667075 DOI: 10.1016/j.rmcr.2019.100939
    Bronchopulmonary lophomoniasis is rare but immunocompromised individual is susceptible to this infection. We reported a case of bronchopulmonary lophomoniasis in a Malaysian female with systemic lupus erythromatosus. She presented with productive cough, shortness of breath and high-grade fever for 2 weeks. Physical examination revealed bronchial sound and crackles over the left lung with, reduced expansion and dull percussion in lower left lobe. Chest radiography showed consolidation of the left lung. Routine laboratory tests revealed general low cell count. Blood and sputum culture were negative. Bronchoalveolar lavage stain and culture for bacterial and fungal were negative. Bronchoalveolar lavage for Lophomonas blattarum was positive. Patient was treated with antiprotozoal drug, metronidazole. All her clinical problems resolved and she was discharged 14 days after admission.
  3. Abdul Yamin NAA, Basaruddin KS, Salleh AF, Salim MS, Wan Muhamad WZA
    Appl Bionics Biomech, 2021;2021:8842591.
    PMID: 33603827 DOI: 10.1155/2021/8842591
    Objective: The aim of this study was to investigate the effects of surface stiffness on multisegment foot kinematics and temporal parameters during running.

    Methods: Eighteen male subjects ran on three different surfaces (i.e., concrete, artificial grass, and rubber) in both heeled running shoes (HS) and minimal running shoes (MS). Both these shoes had dissimilar sole profiles. The heeled shoes had a higher sole at the heel, a thick base, and arch support, whereas the minimal shoes had a flat base sole. Indeed, the studied biomechanical parameters responded differently in the different footwear during running. Subjects ran in recreational mode speed while 3D foot kinematics (i.e., joint rotation and peak medial longitudinal arch (MLA) angle) were determined using a motion capture system (Qualysis, Gothenburg, Sweden). Information on stance time and plantar fascia strain (PFS) was also collected.

    Results: Running on different surface stiffness was found to significantly affect the peak MLA angles and stance times for both HS and MS conditions. However, the results showed that the joint rotation angles were not sensitive to surface stiffness. Also, PFS showed no relationship with surface stiffness, as the results were varied as the surface stiffness was changed.

    Conclusion: The surface stiffness significantly contributed towards the effects of peak MLA angle and stance time. These findings may enhance the understanding of biomechanical responses on various running surfaces stiffness in different shoe conditions.

  4. Azizan NA, Basaruddin KS, Salleh AF, Sulaiman AR, Safar MJA, Rusli WMR
    J Healthc Eng, 2018;2018:7815451.
    PMID: 29983905 DOI: 10.1155/2018/7815451
    Balance in the human body's movement is generally associated with different synergistic pathologies. The trunk is supported by one's leg most of the time when walking. A person with poor balance may face limitation when performing their physical activities on a daily basis, and they may be more prone to having risk of fall. The ground reaction forces (GRFs), centre of pressure (COP), and centre of mass (COM) in quite standing posture were often measured for the evaluation of balance. Currently, there is still no experimental evidence or study on leg length discrepancy (LLD) during walking. Analysis of the stability parameters is more representative of the functional activity undergone by the person who has a LLD. Therefore, this study hopes to shed new light on the effects of LLD on the dynamic stability associated with VGRF, COP, and COM during walking. Eighteen healthy subjects were selected among the university population with normal BMIs. Each subject was asked to walk with 1.0 to 2.0 ms-1 of walking speed for three to five trials each. Insoles of 0.5 cm thickness were added, and the thickness of the insoles was subsequently raised until 4 cm and placed under the right foot as we simulated LLD. The captured data obtained from a force plate and motion analysis present Peak VGRF (single-leg stance) and WD (double-leg stance) that showed more forces exerted on the short leg rather than long leg. Obviously, changes occurred on the displacement of COM trajectories in the ML and vertical directions as LLD increased at the whole gait cycle. Displacement of COP trajectories demonstrated that more distribution was on the short leg rather than on the long leg. The root mean square (RMS) of COP-COM distance showed, obviously, changes only in ML direction with the value at 3 cm and 3.5 cm. The cutoff value via receiver operating characteristic (ROC) indicates the significant differences starting at the level 2.5 cm up to 4 cm in long and short legs for both AP and ML directions. The present study performed included all the proposed parameters on the effect of dynamic stability on LLD during walking and thus helps to determine and evaluate the balance pattern.
  5. Yamin NAAA, Basaruddin KS, Bakar SA, Salleh AF, Som MHM, Bakar AHA
    Acta Bioeng Biomech, 2022;24(1):67-74.
    PMID: 38314464
    PURPOSE: The present study aims to investigate the effect of incline and decline walking on ground and joint reaction forces (JRF) of lower extremity and plantar fascia strain (PFS) under certain surface inclination angles.

    METHODS: Twenty-three male subjects walked on a customized platform with four different surface inclinations (i.e., 0, 5, 7.5 and 10°) with inclined and declined directions. The motion of the ten reflective markers was captured using Qualysis motion capture system (Qualysis, Gothenburg, Sweden) and exported to a visual three-dimensional (3D) software (C-motion, Germantown, USA) in order to analyze the GRF, JRF and PFS.

    RESULTS: The results found that the peak vertical GRF is almost consistent for 0 and 5° inclination slope but started to decrease at 7.5° onwards during decline walking. The most affected JRF was found on knee at medial-lateral direction even as low as 5 to 10° inclination for both walking conditions. Furthermore, the findings also show that the JRF of lower extremity was more affected during declined walking compared to inclined walking based on the number of significant differences observed in each inclination angle. The PFS was found increased with the increase of surface inclination.

    CONCLUSIONS: The findings could provide a new insight on the relationship of joint reaction forces and strain parameter in response to the incline and decline walking. It would benefit in providing a better precaution that should be considered during hiking activity, especially in medial-lateral direction in order to prevent injury or fall risk.

  6. Azmi WA, Wan Sembok WZ, Yusuf N, Mohd Hatta MF, Salleh AF, Hamzah MAH, et al.
    J Econ Entomol, 2019 02 12;112(1):20-24.
    PMID: 30277528 DOI: 10.1093/jee/toy290
    Rockmelon (Cucumis melo Linnaeus (Cucurbitales: Cucurbitaceae)) is a novel commercialized fruit in Malaysia and has great potential to become an important horticultural crop for the international market. In this study, we investigated the effects of pollination by the Indo-Malaya stingless bee Heterotrigona itama Smith (Hymenoptera: Apidae) on measures of yield and quality of rockmelon cultivated in the greenhouse, compared with hand cross-pollination and self-pollination. Results showed that rockmelon produced from plants pollinated by stingless bees and hand cross-pollination had higher fruit set, were heavier and larger, and contained higher numbers of seed per fruit compared with those produced by self-pollination. Pollination by stingless bees produced fruit with greater sweetness than either hand cross-pollination or self-pollination. This study demonstrated that stingless bee pollination produced rockmelon fruit of similar quality, but better yields compared to the other pollination treatments. We showed that stingless bees should be considered as an alternative, effective pollinator for the improved production of high quality rockmelon in commercial greenhouse cultivation.
  7. Abdul Yamin NAA, Basaruddin KS, Abu Bakar S, Salleh AF, Mat Som MH, Yazid H, et al.
    J Healthc Eng, 2022;2022:7716821.
    PMID: 36275397 DOI: 10.1155/2022/7716821
    This study aims to investigate the gait stability response during incline and decline walking for various surface inclination angles in terms of the required coefficient of friction (RCOF), postural stability index (PSI), and center of pressure (COP)-center of mass (COM) distance. A customized platform with different surface inclinations (0°, 5°, 7.5°, and 10°) was designed. Twenty-three male volunteers participated by walking on an inclined platform for each inclination. The process was then repeated for declined platform as well. Qualysis motion capture system was used to capture and collect the trajectories motion of ten reflective markers that attached to the subjects before being exported to a visual three-dimensional (3D) software and executed in Matlab to obtain the RCOF, PSI, as well as dynamic PSI (DPSI) and COP-COM distance parameters. According to the result for incline walking, during initial contact, the RCOF was not affected to inclination. However, it was affected during peak ground reaction force (GRF) starting at 7.5° towards 10° for both walking conditions. The most affected PSI was found at anterior-posterior PSI (APSI) even as low as 5° inclination during both incline and decline walking. On the other hand, DPSI was not affected during both walking conditions. Furthermore, COP-COM distance was most affected during decline walking in anterior-posterior direction. The findings of this research indicate that in order to decrease the risk of falling and manage the inclination demand, a suitable walking strategy and improved safety measures should be applied during slope walking, particularly for decline and anterior-posterior orientations. This study also provides additional understanding on the best incline walking technique for secure and practical incline locomotion.
  8. Zuha RM, Kurahashi H, Chin HC, Osman K, Rashid RA, Hassan RA, et al.
    Trop Biomed, 2009 Aug;26(2):216-8.
    PMID: 19901908
    Myospila pudica pudica (Stein, 1915) (Diptera: Muscidae) was recorded for the first time in Malaysia during a forensic entomological study conducted at a forested area of Forensic Science Simulation Site, Faculty of Allied Health Sciences Universiti Kebangsaan Malaysia, Bangi, Selangor. This species can be differentiated from other species of its genus by having R1 setulose on dorsal surface and R4+5 more or less setulose dorsally and ventrally. The legs, including tarsi, are testaceous yellow and palpi blackish. Lateral and ventral surface of scutellum bare below the level of bristles and the third antennal segment is brownish yellow. Other features including the diverging of inner margin of lower squama from scutellum margin. This is also the first report on the occurence of M. pudica pudica (Stein, 1915) on animal carcass.
Related Terms
Filters
Contact Us

Please provide feedback to Administrator (afdal@afpm.org.my)

External Links