Researchers are increasingly showing interest in the application of a Butler matrix for fifth-generation (5G) base station antennas. However, the design of the Butler matrix is challenging at millimeter wave because of the very small wavelength. The literature has reported issues of high insertion losses and incorrect output phases at the output ports of the Butler matrix, which affects the radiation characteristics. To overcome these issues, the circuit elements of the Butler matrix such as the crossover, the quadrature hybrid and the phase shifter must be designed using highly accurate dimensions. This paper presents a low-loss and compact single-layer 8 × 8 Butler matrix operating at 28 GHz. The optimum design of each circuit element is also demonstrated in detail. The designed Butler matrix was fabricated to validate the simulated results. The measured results showed return losses of less than -10 dB at 28 GHz. The proposed Butler matrix achieved a low insertion loss and a low phase error of ± 2 dB and ± 10°, respectively. In sum, this work obtained a good agreement between the simulated and measured results.
The most crucial challenge in the functioning of the wireless networks is the efficient utilization of radio resources. A significant element of resource handling is power regulation. With increasing requirement of wireless data transmission services, it is essential to devise energy harvesting techniques for mobile devices. In this research, a new methodology has been proposed for distributed power regulation in cognitive radio, networks of CR are grounded on non-cooperation game phenomenon and pricing technique. QoS (Quality of service) of the user of CR is anticipated as a beneficial activity through pricing as well as dissemination of energy generating as an unbeneficial game wherein the consumers increase their overall efficacy. The price is defined as an actual function of transmission power to upraise the pricing of the most distant consumers. The proposed mathematical model shows that the proposed game model has a Nash equilibrium and is also unique. Furthermore, in order to make the proposed algorithm valid for green communication within the wireless network, the best response technique was proposed. Finally, simulation results showed that the proposed energy harvesting technique, grounded on a unique function of the utilization, reduces the consumption of transmission power and greatly improves the convergence speed; which are suitable for the vision of the 5G networks.
The application of membrane separation in palm oil refining process has potential for energy and cost savings. The conventional refining of crude palm oil results in loss of oil and a contaminated effluent. Degumming of crude palm oil by membrane technology is conducted in this study. The objective of this research is to study the feasibility of membrane filtration for the removal of phospholipids in the degumming of crude palm oil, including analyses of phosphorus content, carotene content free fatty acids (as palmitic acid), colour and volatile matter. A PCI membrane module was used which was equipped with polyethersulfone membranes having a molecular weight cut off of 9,000 (type ES209). In this study, phosphorus content was the most important parameter monitored. The membrane effectively removed phospholipids resulting in a permeate with a phosphorus content of less than 0.3 ppm The percentage removal of phosphorus was 96.4% and was considered as a good removal. Lovibond colour was reduced from 27R 50Y to 20R 30Y. The percentage removal of carotene was 15.8%. The removal of colour was considered good but the removal of carotene was considered insignificant by the membrane. Free fatty acids and volatile matter were not removed. Typical of membrane operations, the permeate flux decreased with time and must be improved in order to be adopted on an industrial scale. Membrane technology was found to have good potential in crude palm oil degumming. However, an appropriate method has to be developed to clean the membranes for reuse.
Continuous hydrolysis of palm oil triglyceride in organic solvent using immobilized Candida rugosa on the Amberlite MB-1 as a source of immobilized lipase was studied in packed bed reactor. The enzymatic kinetics of hydrolysis reaction was studied by changing the substrate concentration, reaction temperature and residence time(tau) in the reactor. At 55 degrees C, the optimum water concentration was found to be 15 % weight per volume of solution (%w/v). The Michaelis-Menten kinetic model was used to obtain the reaction parameters, Km(app) and V max(app). The activation energies were found to be quite low indicating that the lipase-catalyzed process is controlled by diffusion of substrates. The Michaelis-Menten kinetic model was found to be suitable at low water concentration 10-15 %w/v of solution. At higher water concentration, substrate inhibition model was used for data analysis. Reactor operation was found to play an important role in the palm oil hydrolysis kinetic.
Hydrolysis of palm oil has become an important process in Oleochemical industries. Therefore, an investigation was carried out for hydrolysis of palm oil to fatty acid and glycerol using immobilized lipase in packed bed reactor. The conversion vs. residence time data were used in Michaelis-Menten rate equation to evaluate the kinetic parameters. A mathematical model for the rate of palm oil hydrolysis was proposed incorporating role of external mass transfer and pore diffusion. The model was simulated for steady-state isothermal operation of immobilized lipase packed bed reactor. The experimental data were compared with the simulated results. External mass transfer was found to affect the rate of palm oil hydrolysis at higher residence time.
With the increasing scarcity of traditional energy sources, global warming and environmental degradation, the increased use of renewable energy (RE) has become an effective path for sustainable development. Therefore, countries are paying more and more attention to the development of the RE industry, and the world trade in renewable energy products (REPs) is developing rapidly. First of all, this paper defines REPs, refines the scope of REPs, and proposes the "Equalization Technology Classification" method for the technology classification of REPs. Second, based on the United Nations Comtrade (COMTRADE) data, the export technology structure of China's REPs from 2007 to 2016 was empirically measured. Finally, a comparative study was conducted on the renewable energy product (REP) export technologies of major REP exporting countries (or regions) in the world. We found that (1) China's exports of REPs are mainly medium-high and medium technical complexity products, and that there are few high technical complexity products; (2) the export technology structure of China's REPs is deteriorating, and its overall technical level is in the middle of the global industrial value chain. The export technology of China's REPs has a gap compared with that of Denmark, Hong Kong China, and Singapore; (3) the technological competition of the world's REPs is becoming increasingly fierce. The growth rates of REP technologies in South Korea, Japan, and Malaysia's REPs are significantly higher than that of China.
A simple, efficient and economical method for the recovery of P(3HB-co-3HHx) was developed using various chemicals and parameters. The initial content of P(3HB-co-3HHx) in bacterial cells was 50-60 wt%, whereas the monomer composition of 3HHx used in this experiments was 3-5 mol%. It was found that sodium hydroxide (NaOH) was the most effective chemical for the recovery of biodegradable polymer. High polyhydroxyalkanoate purity and recovery yield both in the range of 80-90 wt% were obtained when 10-30 mg/ml of cells were incubated in NaOH at the concentration of 0.1 M for 60-180 min at 30 °C and polished using 20 % (v/v) of ethanol.
Matched MeSH terms: Green Chemistry Technology/economics