MyMedR

Displaying publications 21 - 27 of 27 in total

Abstract:

Sort:

Search for Low-Mass Quark-Antiquark Resonances Produced in Association with a Photon at sqrt[s]=13 TeV

Sirunyan AM, Tumasyan A, Adam W, Ambrogi F, Bergauer T, Brandstetter J, et al.

Phys Rev Lett, 2019 Dec 06;123(23):231803.
PMID: 31868480 DOI: 10.1103/PhysRevLett.123.231803

A search for narrow low-mass resonances decaying to quark-antiquark pairs is presented. The search is based on proton-proton collision events collected at 13 TeV by the CMS detector at the CERN LHC. The data sample corresponds to an integrated luminosity of 35.9 fb^{-1}, recorded in 2016. The search considers the case where the resonance has high transverse momentum due to initial-state radiation of a hard photon. To study this process, the decay products of the resonance are reconstructed as a single large-radius jet with two-pronged substructure. The signal would be identified as a localized excess in the jet invariant mass spectrum. No evidence for such a resonance is observed in the mass range 10 to 125 GeV. Upper limits at the 95% confidence level are set on the coupling strength of resonances decaying to quark pairs. The results obtained with this photon trigger strategy provide the first direct constraints on quark-antiquark resonance masses below 50 GeV obtained at a hadron collider.

Matched MeSH terms: Precipitating Factors
Search for a Narrow Resonance Lighter than 200 GeV Decaying to a Pair of Muons in Proton-Proton Collisions at sqrt[s]=13 TeV

Sirunyan AM, Tumasyan A, Adam W, Ambrogi F, Bergauer T, Dragicevic M, et al.

Phys Rev Lett, 2020 Apr 03;124(13):131802.
PMID: 32302170 DOI: 10.1103/PhysRevLett.124.131802

A search is presented for a narrow resonance decaying to a pair of oppositely charged muons using sqrt[s]=13 TeV proton-proton collision data recorded at the LHC. In the 45-75 and 110-200 GeV resonance mass ranges, the search is based on conventional triggering and event reconstruction techniques. In the 11.5-45 GeV mass range, the search uses data collected with dimuon triggers with low transverse momentum thresholds, recorded at high rate by storing a reduced amount of trigger-level information. The data correspond to integrated luminosities of 137 and 96.6 fb^{-1} for conventional and high-rate triggering, respectively. No significant resonant peaks are observed in the probed mass ranges. The search sets the most stringent constraints to date on a dark photon in the ∼30-75 and 110-200 GeV mass ranges.

Matched MeSH terms: Precipitating Factors
Evaluating the alert appropriateness of clinical decision support systems in supporting clinical workflow

Olakotan OO, Yusof MM

J Biomed Inform, 2020 06;106:103453.
PMID: 32417444 DOI: 10.1016/j.jbi.2020.103453

The overwhelming number of medication alerts generated by clinical decision support systems (CDSS) has led to inappropriate alert overrides, which may lead to unintended patient harm. This review highlights the factors affecting the alert appropriateness of CDSS and barriers to the fit of CDSS alert with clinical workflow. A literature review was conducted to identify features and functions pertinent to CDSS alert appropriateness using the five rights of CDSS. Moreover, a process improvement method, namely, Lean, was used as a tool to optimise clinical workflows, and the appropriate design for CDSS alert using a human automation interaction (HAI) model was recommended. Evaluating the appropriateness of CDSS alert and its impact on workflow provided insights into how alerts can be designed and triggered effectively to support clinical workflow. The application of Lean methods and tools to analyse alert efficiencies in supporting workflow in this study provides an in-depth understanding of alert-workflow fit problems and their root cause, which is required for improving CDSS design. The application of the HAI model is recommended in the design of CDSS alerts to support various levels and stages of alert automations, namely, information acquisition and analysis, decision action and action implementation.

Matched MeSH terms: Precipitating Factors
Fulltext Triggering Emotional Value Through Aesthetics of Compact Car Design in Malaysia

Muhamad Aiman Afiq Mohd Noor, Azhari Md Hashim

International Journal of Innovation and Industrial Revolution, 2020;2(4):1-8.
MyJurnal

The relationship between typicality and novelty was discussed in order to identify the significant emotional value arising in the compact car design of Malaysian manufacturers. Typicality and novelty usually are associated with the aesthetic preference of human artefacts as in this study in compact car design. Considering a typical product is rarely new and, conversely, a novel product often labelled as typical, the positive effects of both features seem incompatible. This paper discusses the history of the Malaysian manufacturer’s compact car design according to its timeline and the current market based on its model and achievement. Furthermore, the relationship between compact car design such as the limitation of emotional value arising through typicality and novelty of specific compact car design and how it triggers the user’s perception through its aesthetics form. Hence, a pilot study was conducted to validate a set of stimulus and questionnaires as a way to formulate an actual survey. Finally, the outcome of this study will suggest a way forward in exploring typicality and novelty through a reliable method of compact car design

Matched MeSH terms: Precipitating Factors
Fulltext Coping Strategies and Suicidality: A Cross-Sectional Study From China

Liang J, Kõlves K, Lew B, de Leo D, Yuan L, Abu Talib M, et al.

Front Psychiatry, 2020;11:129.
PMID: 32231596 DOI: 10.3389/fpsyt.2020.00129

Background and Objective: Suicide is a leading cause of death in young people. Suicidal thoughts and behaviors can be triggered by life and study stresses; therefore, it is important to understand the role of coping strategies. The current study analyzed the link between different coping strategies and suicidality in university students in China. Methods: A cross-sectional study of 2,074 undergraduate students from China used a stratified-clustered-random sampling method (response rate 94.4%). The Suicidal Behaviors Questionnaire-Revised Scale was used to identify suicidal risks, while the Brief COPE scale was used to measure different coping strategies. Univariate and multivariate logistic regression analyses were utilized to examine coping strategies and suicidality. Results: A negative association of some coping skills (active coping and positive reframing) with suicidality and a positive association of some other coping skills (self-distraction, substance abuse, behavioral disengagement, venting, and self-blame) with suicidality were observed after adjusting for sociodemographic and mental health variables. Conclusions: Training and supporting young people to identify and apply adaptive coping strategies to deal with life stress could help to reduce suicidal ideation and behavior.

Matched MeSH terms: Precipitating Factors
Relationship between organizational dehumanization and nurses' deviant behaviors: A moderated mediation model

Sarwar A, Khan J, Muhammad L, Mubarak N, Jaafar M

J Nurs Manag, 2021 Jan 04.
PMID: 33394539 DOI: 10.1111/jonm.13241

AIM(S): This paper investigated the impact of organisational dehumanization on nurses' deviant behaviours in the Pakistani health sector directly and indirectly through job stress. The study also examined the moderation role of occupational self-efficacy on the relationship between organisational dehumanization and job stress.
BACKGROUND: While the attitudinal outcomes of organisational dehumanization have been a focus of research, its behavioural outcomes are a relatively ignored research area.
METHOD: Data were collected from 295 nurses working in hospitals across Pakistan via self-administered questionnaires with two measurement points to test the direct and indirect effects of organisational dehumanization.
RESULTS: The hypothesized relationships were tested with SPSS 25 and the Process Macro Model 7. The results showed that organisational dehumanization increased deviant behaviours among nurses directly and indirectly via job stress. Moreover, occupational self-efficacy plays moderation role and weakens the relationship between organisational dehumanization and job stress.
CONCLUSION: This study contributes to the existing literature by concentrating on predictors that trigger deviant behaviour among nurses. It also assessed the mediating impact of job stress, an essential endeavour for researchers and practitioners.
IMPLICATIONS FOR NURSING MANAGEMENT: The study outcomes can help the health sector improve their strategies to address organisational dehumanization and deviant behaviour among nurses.

Matched MeSH terms: Precipitating Factors
Stretchable AgX (X = Se, Te) for Efficient Thermoelectrics and Photovoltaics

Robin Chang YH, Jiang J, Khong HY, Saad I, Chai SS, Mahat MM, et al.

ACS Appl Mater Interfaces, 2021 Jun 02;13(21):25121-25136.
PMID: 34008948 DOI: 10.1021/acsami.1c04759

Transition metal chalcogenides (TMCs) have gained worldwide interest owing to their outstanding renewable energy conversion capability. However, the poor mechanical flexibility of most existing TMCs limits their practical commercial applications. Herein, triggered by the recent and imperative synthesis of highly ductile α-Ag2S, an effective approach based on evolutionary algorithm and ab initio total-energy calculations for determining stable, ductile phases of bulk and two-dimensional Ag
x
Se1-x and Ag
x
Te1-x compounds was implemented. The calculations correctly reproduced the global minimum bulk stoichiometric P212121-Ag8Se4 and P21/c-Ag8Te4 structures. Recently reported metastable AgTe3 was also revealed but it lacks dynamical stability. Further single-layered screening unveiled two new monolayer P4/nmm-Ag4Se2 and C2-Ag8Te4 phases. Orthorhombic Ag8Se4 crystalline has a narrow, direct band gap of 0.26 eV that increases to 2.68 eV when transforms to tetragonal Ag4Se2 monolayer. Interestingly, metallic P21/c-Ag8Te4 changes to semiconductor when thinned down to monolayer, exhibiting a band gap of 1.60 eV. Present findings confirm their strong stability from mechanical and thermodynamic aspects, with reasonable Vickers hardness, bone-like Young's modulus (E) and high machinability observed in bulk phases. Detailed analysis of the dielectric functions ε(ω), absorption coefficient α(ω), power conversion efficiency (PCE) and refractive index n(ω) of monolayers are reported for the first time. Fine theoretical PCE (SLME method ∼11-28%), relatively high n(0) (1.59-1.93), and sizable α(ω) (104-105 cm-1) that spans the infrared to visible regions indicate their prospects in optoelectronics and photoluminescence applications. Effective strategies to improve the temperature dependent power factor (PF) and figure of merit (ZT) are illustrated, including optimizing the carrier concentration. With decreasing thickness, ZT of p-doped Ag-Se was found to rise from approximately 0.15-0.90 at 300 K, leading to a record high theoretical conversion efficiency of ∼12.0%. The results presented foreshadow their potential application in a hybrid device that combines the photovoltaic and thermoelectric technologies.

Matched MeSH terms: Precipitating Factors