Sago bark (SB) and empty fruit bunch (EFB) are available abundantly as agricultural waste in Sarawak. This study was conducted to investigate the physicochemical characteristics of SB and EFB as composting materials and used as a plant growth medium. The SB and EFB composts were prepared in a separate container by mixing chicken manure as compost accelerator and wood chips as a bulking agent in dry weight equivalent ratio (1:1:1). The maturity and stability of compost in 60-day composting periods were evaluated via physicochemical characterization of the composts in terms of pH, elemental content, total ash content, moisture content and nutrient analyses. The effect of the compost usage as growth medium was assessed towards water spinach and green mustard via seed germination and pot study. After 2 months, the colour of both composts was dark brown with an earthy smell. The acidic pH of the initial composting stage has changed into alkaline pH after 60 days of composting. Total NPK present in the SB and EFB composts were 0.96% and 1.21%, respectively. The germination index (GI) for the studied vegetables was above 100%, while the pot study showed that vegetables in compost media has higher growth compared to the control, after 14 days. SB and EFB are renewable waste which can be used as an excellent compost and able to improve the quality of the soil.
In this study, we proposed integrated tools to evaluate the wind power potential, economic viability, and prioritize 15 proposed sites for the installation of wind farms. Initially, we used modified Weibull distribution model coupled with power law to assess the wind power potential. Secondly, we employed value cost method to estimate per unit cost ($/kWh) of proposed sites. Lastly, we used Fuzzy Technique for Order of Preference by Similarity to Ideal Solution (F-TOPSIS) to rank the best alternatives. The results indicate that Pakistan has enormous wind power potential that cost varies from 0.06 $/kWh to 0.58 $/kWh; thus, sites S12, S13, S14, and S15 are considered as the most economic viable locations for the installation of wind power project, while remaining sites are considered to be less important, due to other complexities. The further analysis using Fuzzy-TOPSIS method reveals that site S13 is the most optimal location followed by S12, S14, and S14 for the development of wind power project. We proposed that government should formulate wind power policy for the implementation of wind power projects in order to meet energy demand of the country.
This paper examines the effects of energy consumption, economic growth, and financial development on carbon emissions in a panel of 122 countries. We employ both first-generation and second-generation cointegration and estimation procedures in order to address diverse economic and econometric issues such as heterogeneity, endogeneity, and cross-sectional dependence. We find a cointegration relationship between the variables. Energy consumption, economic growth, and financial development have detrimental effects on carbon emissions in the full sample. When the sample is split into different income groups, we reveal that economic growth and financial development mitigate carbon emissions in high-income group but have the opposite effects in low-income and middle-income groups. The implication of the findings is that energy consumption increases carbon emissions. While high levels of income and financial development decrease carbon emissions, low levels of income and financial development intensify it. Based on the findings, the paper makes some policy recommendations.
Malaysia is the second-largest producer and exporter of palm oil amounting to 39% of world palm oil production and 44% of world exports (MPOB, 2014). An enormous amount of palm oil mill effluent is released during palm oil milling, and the effluent causes a major odor problem. Many methods, such as biofiltering, can be adopted to manage the malodor. However, these methods are expensive and require high maintenance. The separation distance method can be used as an alternative due to its low cost and effectiveness. This research was conducted to verify the performance of three different methods, namely, in-field monitoring by using an olfactometer, CALPUFF model, and Gaussian plume model. Given that no research has compared the three methods, this study examined the effectiveness of the methods and determined which among them is suitable for use in Malaysia. The appropriate separation distances were 1.3 km for in-field monitoring, 1.2 km for the CALPUFF model, and 0.5 for the Gaussian plume model. These different values of separation distance were due to the various approaches involved in each method. This research determined an appropriate means to establish a proper separation distance for reducing odor nuisance in areas around palm oil mills.
Bauxite and iron ore mining is the major contributor to metal pollution in Tasik Chini, Malaysia. Deforestation of the protected zone of reserve forest exacerbates the problem. The current study is to understand the speciation of metals spatially in sediment to analyse the risk associated in terms of its mobility and bioavailability. The samples of sediment are collected from Sungai Jemberau, Laut Jemberau, and Laut Gumum of Tasik Chini. Four samplings were conducted for a year, by collecting the surface sediment. Sequential extraction method was followed for speciation of sediment and classified it into exchangeable, reducible, Fe-Mn oxides, organic and residual fractions. The results were also analyzed using principal component analysis (PCA) and cluster analysis (CA). The result reveals that Fe, Al, Mn, Zn, and Pb are the primary constituents of sediment contributing to about 98% of residual fraction. Co, Cd, Cr, As, and Ni are found in trace metal concentration and are identified to be mainly released from anthropogenic sources nearby. Although the individual proportion is less than major metals in exchangeable and carbonate fraction, they possess geochemically significant concentration above the permissible limit. More than 70-80% of all its total concentration proportion is hence found in mobile and bioavailable state. These possess toxic and have chronic effects to aquatic life and public health even in trace elemental concentration. Hence, these metals are the most toxic and bioavailable metals pausing risk for aquatic and public health. PCA analysis highlights that the enrichment of heavy metals in bioavailable fraction is mostly contributed from anthropogenic sources. The same results are emphasized by cluster analysis.
It is well documented that carbon emissions can be reduced by replacing conventional energy resources with renewable energy resources; thereby, the role of green technology is essential as it protect natural environment. Given that, the United Nations' agenda of "green is clean" may be achievable by adoption of green technologies. The objective of the study is to examine the link between information and communication technology (ICT), economic growth, energy consumption, and carbon dioxide (CO2) emissions in the context of South Korean economy, by using a novel Morlet wavelet approach. The study applies continuous wavelet power spectrum, the wavelet coherency, and the partial and the multiple wavelet coherency to the year during 1973-2016. The outcomes reveal that the connections among the stated variables progress over frequency and time domain. From the frequency domain point of view, the current study discovers noteworthy wavelet coherence and robust lead and lag linkages. From the time-domain sight, the results display robust but not consistent associations among the considered variables. From an economic point sight, the wavelet method displays that ICT helps to reduce environmental degradation in a medium and long run in the South Korean economy. This emphasizes the significance of having organized strategies by the policymakers to cope up with 2 to 3 years of the occurrence of the huge environmental degradation in South Korea.
A new Schiff base containing 1,2,4-triazole ring system (L) was synthesized and confirmed by 1HNMR, FTIR spectroscopy. The chemical modification of PVC with a new Schiff base (L) was synthesized to produce a homogenous blend (PVC-L). A homogenous blend (PVC-L) was added to copper chloride to produce PVC-L-Cu (II). The PVC films had been irradiated with ultraviolet light for a long period and confirmed by FTIR spectroscopy and weight loss; the surface morphology was inspected by scanning electron microscopy.
In an attempt to mitigate the effects of extreme natural events caused by greenhouse gases (GHGs), a significant number of researchers and environmentalists have repeatedly stressed the importance of implementing protective measures, including the promotion of green consumption. This study examined the elements that motivated the willingness and the practice of green behavior (GB) among low-income households in coastal Peninsular Malaysia. To meet the research objectives, this study adopted the survey questionnaire method to collect data from 380 low-income households. The findings revealed that self-efficacy (SE) and environmental concerns (EC) have statistically significant effects on the attitude toward green products (ATT), while subjective norms (SN) and perceived behavioral control (PBC) have influence on the intention of green vehicles. Eventually, the study discovered the effects of the intention to adopt green vehicle on green vehicle adoption behavior. Hence, the findings of this study provide new insights for policymakers in Malaysia to place more emphasis on improving consumer attitudes, social standards, and PBC, which will ultimately contribute to the adoption of environment-friendly vehicles. In addition, car manufacturers should support this program by designing products and options that would encourage those in the low-income group to replace their conventional vehicles with green alternatives in Malaysia.
Silver nanoparticles (AgNPs) were prepared by reacting Kyllinga brevifolia extract (KBE) with AgNO3 aqueous solution at room temperature (22 ± 3 °C). The phytochemical constituents in KBE responsible for the reduction process were identified as carbohydrate, protein, and plant sterols (stigmasterol and campesterol). KBE was also found to function as a capping agent for stabilization of AgNPs. The AgNPs were stable at room temperature and had a quasi-spherical shape with an average particle size 22.3 nm. The use of KBE offers not only eco-friendly and non-pathogenic path for AgNPs formation, it also induced rapid formation of the AgNPs. Methylene blue (MB) removal was then done on the AgNPs in the presence of either KBE or NaBH4. Ninety-three percent removal of MB was achieved with a rate of reaction 0.2663 min-1 in the solution with KBE+AgNPs (pH 2). However, in NaBH4+AgNPs system, 100% MB removal was achieved at pH 8-10. The reaction rate was 2.5715 min-1 indicating a fast removal rate of MB dye. The process of reduction occurs via electron relay effect whereas in KBE+AgNPs system, sedimentation occurred along with the reduction process. Nevertheless, the use of KBE+AgNPs system is preferred as the reducing agent is more benign to the environment.
A novel porous coordination polymer adsorbent (BTCA-P-Cu-CP) based on a piperazine(P) as a ligand and 1,2,4,5-benzenetetracarboxylic acid (BTCA) as a linker was synthesized and magnetized to form magnetic porous coordination polymer (BTCA-P-Cu-MCP). Fourier transform infrared (FTIR), X-ray diffraction (XRD), vibrating sample magnetometer (VSM), field emission scanning electron microscope(FESEM), energy-dispersive X-ray spectroscopy(EDS), CHN, and Brunauer-Emmett-Teller(BET) analysis were used to characterize the synthesized adsorbent. BTCA-P-Cu-MCP was used for removal and preconcentration of Pb(II) ions from environmental water samples prior to flame atomic absorption spectrometry(FAAS) analysis. The maximum adsorption capacity of BTCA-P-Cu-MCP was 582 mg g-1. Adsorption isotherm, kinetic, and thermodynamic parameters were investigated for Pb(II) ions adsorption. Magnetic solid phase extraction (MSPE) method was used for preconcentration of Pb(II) ions and the parameters influencing the preconcentration process have been examined. The linearity range of proposed method was 0.1-100 μg L-1 with a preconcentration factor of 100. The limits of detection and limits of quantification for lead were 0.03 μg L-1 and 0.11 μg L-1, respectively. The intra-day (n = 7) and inter-day (n = 3) relative standard deviations (RSDs) were 1.54 and 3.43% respectively. The recoveries from 94.75 ± 4 to 100.93 ± 1.9% were obtained for rapid extraction of trace levels of Pb(II) ions in different water samples. The results showed that the BTCA-P-Cu-MCP was steady and effective adsorbent for the decontamination and preconcentration of lead ions from the aqueous environment.
The availability of natural energy resources and the environmental issues are the most significant issues that are often highlighted by the world communities. With regard to these problems, isobutanol is a higher chain alcohol with four carbons which can be derived from biomass resources and it is potential to become an alternative fuel source besides the biodiesel for a diesel engine. The aim of this study is to evaluate the effect of isobutanol with Calophyllum inophyllum methyl ester and diesel as the ternary blend on physicochemical properties, engine performance, and emission characteristics. Five different fuel blends containing Calophyllum inophyllum biodiesel and isobutanol were tested on a single-cylinder direct injection diesel engine at different engine load of brake mean effective pressure. The physicochemical properties of the fuel blends were measured and then compared with neat diesel. The results indicate that the blend containing isobutanol and CIME gives a slight increase in BSEC and EGT and a minimal drop in BTE as compared to that of neat diesel. Besides that, the tested blends show a reduction of carbon monoxide and unburned hydrocarbon emissions. Meanwhile, all the fuel blends show a minimal increase in carbon dioxide and nitrogen oxides emissions, compared to that of neat diesel. Isobutanol can be proved as a preferred substitute for biodiesel and diesel fuels to achieve desired engine performance and emissions level.
In this study, hydrothermal carbonization (HTC) of a biomass was used as a means to improve the physicochemical properties of rubber seed shell (RSS) and enhance its reactivity in the char-CO2 gasification reaction, known as the Boudouard reaction (C + CO2 ↔ 2CO). Hydrochar samples were developed by hydrothermal treatment of RSS, without separating the solid residue from the liquid product, at 433, 473, 513, and 553 K under autogenous pressure. The CO2 gasification reactivity of the developed hydrochars was then investigated at different heating rates (5, 10, 20, and 30 K/min) by the non-isothermal thermogravimetric method. The hydrochars revealed higher reactivity and improved gasification characteristics compared to the untreated biomass, while the hydrochar which was filtered from the liquid slurry showed lower reactivity compared to the untreated biomass. This was due to the chemical and structural evolutions of the biomass during hydrothermal treatment as indicated by various analyses. The gasification reactivity of the hydrochar was substantially enhanced by introduction of a catalyst (NaNO3) during HTC. Kinetic analysis of the char-CO2 gasification reaction was carried out by applying Flynn-Wall-Ozawa (FWO), Kissinger-Akahira-Sunose (KAS), and Starink isoconversional methods, and thermodynamic parameters were also determined. The activation energy of the Na-loaded RSS hydrochar in CO2 gasification (120-154 kJ/mol) was considerably lower than that of the untreated biomass (153-172 kJ/mol). Thermodynamic studies also confirmed the promoting effect of hydrothermal treatment and catalyst impregnation on enhancement of reactivity of the virgin biomass and reduction of gasification temperature.
Production of Scenedesmus sp. biomass in chicken slaughterhouse wastewater (CSWW) is a promising alternative technique for commercial culture medium due to the high nutritional content of the generated biomass to be used as fish feeds. The current work deals with optimising of biomass production in CSWW using response surface methodology (RSM) as a function of two independent variables, namely temperature (10-30 °C) and photoperiod (6-24 h). The potential application of biomass yield as fish feeds was evaluated based on carbohydrate, protein and lipid contents. The results revealed that the best operating parameters for Scenedesmus sp. biomass production with high contents of carbohydrates, proteins and lipids were determined at 30 °C and after 24 h. The actual and predicted values were 2.47 vs. 3.09 g, 1.44 vs. 1.27 μg/mL, 29.9 vs. 31.60% and 25.75 vs. 28.44%, respectively. Moreover, the produced biomass has a high concentration of fatty acid methyl ester (FAME) as follows: 35.91% of C15:1; 17.58% of C24:1 and 14.11% of C18:1N9T. The biomass yields have 7.98% of eicosapentaenoic acid (EPA, C20:5N3) which is more appropriate as fish feeds. The Fourier transform infrared (FTIR) analysis of biomass revealed that the main functional groups included hydroxyl (OH), aldehyde (=C-H), alkanes and acyl chain groups. Scanning electron micrograph (SEM) and energy-dispersive X-ray spectroscopic analysis (EDS) indicated that the surface morphology and element distribution in biomass produced in BBM and CSWW were varied. The findings have indicated that the biomass produced in CSWW has high potential as fish feeds.
The objective of the study is to examine the impact of natural disasters on external migration, price level, poverty incidence, health expenditures, energy and environmental resources, water demand, financial development, and economic growth in a panel of selected Asian countries for a period of 2005-2017. The results confirm that natural disasters in the form of storm and flood largely increase migration, price level, and poverty incidence, which negatively influenced country's economic resources, including enlarge healthcare expenditures, high energy demand, and low economic growth. The study further presented the following results: i) natural resource depletion increases external migration, ii) FDI inflows increase price level, iii) increase healthcare spending and energy demand decreases poverty headcount, iv) poverty incidence and mortality rate negatively influenced healthcare expenditures, v) industrialization increases energy demand, and vi) agriculture value added, fertilizer, and cereal yields required more water supply to produce greater yield. The study emphasized the need to magnify the intensity of natural disasters and create natural disaster mitigation unit to access the human and infrastructure cost and attempt quick recovery for global prosperity.
Mining activities are responsible for the elevated input levels of suspended sediment and hazardous metals into the riverine ecosystem. These have been shown to threaten the riverine fish populations and can even lead to localized population extinction. To date, research on the effects of mining activities on fish has been focused within metal contamination and bioaccumulation and its threat to human consumption, neglecting the effects of suspended sediment. This paper reviews the effects of suspended sediment and metal pollution on riverine ecosystem and fish population by examining the possibilities of genetic changes and population extinction. In addition, possible assessments and studies of the riverine fish population are discussed to cope with the risks from mining activities and fish population declines.
This study focuses to investigate the relationship between globalization and the ecological footprint for Malaysia from 1971 to 2014. The results of the Bayer and Hanck cointegration test and the ARDL bound test show the existence of cointegration among variables. The findings disclose that globalization is not a significant determinant of the ecological footprint; however, it significantly increases the ecological carbon footprint. Energy consumption and economic growth stimulate the ecological footprint and carbon footprint in Malaysia. Population density reduces the ecological footprint and carbon footprint. Further, financial development mitigates the ecological footprint. The causality results disclose the feedback hypothesis between energy consumption and economic growth in the long run and short run.
In this present study, adsorptive membranes for Cr(VI) ion removal were prepared by blending polyethersulfone (PES) with hydrous ferric oxide (HFO) nanoparticles (NPs). The effects of HFO NPs to PES weight ratio (0-1.5) on the physicochemical properties of the resultant HFO/PES adsorptive membranes were investigated with respect to the surface chemistry and roughness as well as structural morphologies using different analytical instruments. The adsorptive performance of the HFO NPs/PES membranes was studied via batch adsorption experiments under various conditions by varying solution pH, initial concentration of Cr(VI), and contact time. The results showed that the membrane made of HFO/PES at a weight ratio of 1.0 exhibited the highest adsorption capacity which is 13.5 mg/g. Isotherm and kinetic studies revealed that the mechanism is best fitted to the Langmuir model and pseudo-second-order model. For filtration of Cr(VI), the best promising membranes showed improved water flux (629.3 L/m2 h) with Cr(VI) ion removal of 75%. More importantly, the newly developed membrane maintained the Cr(VI) concentration below the maximum contamination level (MCL) for up to 9 h.
A novel titanium dioxide/activated carbon (TiO2/AC) composite where AC derived from oil palm empty fruit bunch (EFB) was synthesised by using sol-gel method. All the samples were characterised by using X-ray diffraction (XRD), scanning electron microscopy-energy dispersive X-ray (SEM-EDX), Fourier transformed infrared (FTIR), thermogravimetric analysis (TGA) and surface analyser. SEM analysis showed that TiO2 particles were successfully embedded and well distributed on the AC surface. The elemental composition analysis found that the TiO2/AC composite contained titanium (Ti), oxygen (O) and carbon (C) atoms. Meanwhile, the appearance of new band at about 960 cm-1 which assigned to the Ti-O stretching was observed in the FTIR spectra when the AC was incorporated into TiO2. TGA analysis showed that the weight loss of 32 wt.% from 150 to 550 °C was due to the decomposition of amorphous carbon layers and loss of hydroxyl groups on TiO2. It was found that the TiO2/AC composite had better performance in the sonocatalytic degradation of malachite green as compared to the individual AC and TiO2 because the TiO2/AC composite had dual functionality and huge number of active sites which could promote the mass transfer of dye molecules towards catalyst surface. By using 1.5 g/L of TiO2/AC composite which calcined at 700 °C on 100 mL of 200 mg/L of malachite green at solution pH of 7, a degradation efficiency of 87.11% had been achieved after 30 min of ultrasonic irradiation. A lower chemical oxygen demand (COD) removal (81.75%) was observed because the structured dye molecules underwent mineralisation process during the sonocatalytic degradation to generate intermediate compounds. The TiO2/AC composite was able to be recycled and still achieved a high degradation efficiency of 76.78% after second catalytic cycle as compared to the fresh TiO2/AC composite with degradation efficiency of 87.11%. In conclusion, the TiO2/AC composite had high reusability and promising for practical applications in textile industry.
One of the biggest challenges of using single-chamber microbial fuel cells (MFCs) that utilize proton-exchange membrane (PEM) air cathode for bioenergy recovery from recalcitrant organic compounds present in wastewater is mainly attributed to their high internal resistance in the anodic chamber of the single microbial fuel cell (MFC) configurations. The high internal resistance is due to the small surface area of the anode and cathode electrodes following membrane biofouling and pH splitting conditions as well as substrate and oxygen crossover through the membrane pores by diffusion. To address this issue, the fabrication of new PEM air-cathode single-chamber MFC configuration was investigated with inner channel flow open assembled with double PEM air cathodes (two oxygen reduction activity zones) coupled with spiral-anode MFC (2MA-CsS-AMFC). The effect of various proton-exchange membranes (PEMs), including Nafion 117 (N-117), Nafion 115 (N-115), and Nafion 212 (N-212) with respective thicknesses of 183, 127, and 50.08 μ, was separately incorporated into carbon cloth as PEM air-cathode electrode to evaluate their influences on the performance of the 2MA-CsS-AMFC configuration operated in fed-batch mode, while Azorubine dye was selected as the recalcitrant organic compound. The fed-batch test results showed that the 2MA-CsS-AMFC configuration with PEM N-115 operated at Azorubine dye concentration of 300 mg L-1 produced the highest power density of 1022.5 mW m-2 and open-circuit voltage (OCV) of 1.20 V coupled with enhanced dye removal (4.77 mg L h-1) compared to 2MA-CsS-AMFCs with PEMs N-117 and N-212 and those in previously published data. Interestingly, PEM 115 showed remarkable reduction in biofouling and pH splitting. Apart from that, mass transfer coefficient of PEM N-117 was the most permeable to oxygen (KO = 1.72 × 10-4 cm s-1) and PEM N-212 was the most permeable membrane to Azorubine (KA = 7.52 × 10-8 cm s-1), while PEM N-115 was the least permeable to both oxygen (KO = 1.54 × 10-4) and Azorubine (KA = 7.70 × 10-10). The results demonstrated that the 2MA-CsS-AMFC could be promising configuration for bioenergy recovery from wastewater treatment under various PEMs, while application of PEM N-115 produced the best performance compared to PEMs N-212 and N-117 and those in previous studies of membrane/membrane-less air-cathode single-chamber MFCs that consumed dye wastewater.
The demand for high-quality safe and clean water supply has revolutionized water treatment technologies and become a most focused subject of environmental science. Water contamination generally marks the presence of numerous toxic and harmful substances. These contaminants such as heavy metals, organic and inorganic pollutants, oil wastes, and chemical dyes are discharged from various industrial effluents and domestic wastes. Among several water treatment technologies, the utilization of silica nanostructures has received considerable attention due to their stability, sustainability, and cost-effective properties. As such, this review outlines the latest innovative approaches for synthesis and application of silica nanostructures in water treatment, apart from exploring the gaps that limit their large-scale industrial application. In addition, future challenges for improved water remediation and water quality technologies are keenly discussed.