Cathode in photocatalytic fuel cell (PFC) plays a crucial role in degradation of organic contaminants. In this study, synthesized copper oxide (CuO) was loaded on carbon plate and used as photocathode in PFC for degradation of synthetic azo dye Reactive Black 5 (RB5) and real textile wastewater. Morphology and structural phase of the synthesized CuO were analyzed using scanning electron microscopy (SEM) and X-ray diffraction (XRD), respectively. Several operating parameters had been investigated such as light irradiation, initial dye concentration, and pH of azo dye solution within 6 h of irradiation time. The lowest initial concentration of RB5 (10 mg L-1) achieved 100% color removal compared to the highest initial concentration (40 mg L-1) which only achieved 77.1% color removal within 6 h of irradiation time. The influence of external resistance was significant in electricity generation but trivial in dye degradation efficiency. The external resistance of 6000 Ω yielded highest maximum power density, with Pmax of 0.2631 μW cm-2, followed by 1000 Ω (0.2196 μW cm-2) and 8000 Ω (0.1587 μW cm-2), respectively. The real textile wastewater with dilution ratio (DR) 1:6 yielded the highest energy conversion efficiency, η (3.62%), followed by DR 1:4 (3.19%) and DR 1:2 (1.96%), respectively.
The enhancement of up-flow constructed wetland-microbial fuel cell (UFCW-MFC) performance in energy retrieval from caffeine containing wastewater has been explored via various operating conditions (hydraulic retention time (HRT), multianode (MA), multicathode current collector (MC), external resistance). The anaerobic decaffeination and COD removal improved by 37 and 12% as the HRT extended from 1 to 5 d. The increment in contact time between the microbes and organic substrates promoted the degradation and contributed to higher power output (3.4-fold), CE (eightfold), and NER (14-16-fold). The MA and MC connections facilitated the electron transfer rate and the degradation rate of organic substrates in the multiple anodic zones, which enhanced the removal efficiency in the anaerobic compartment (Caffeine: 4.2%; COD: 7.4%) and led to higher electricity generation (Power: 4.7-fold) and energy recovery (CE: 1.4-fold; NER: 2.3-2.5-fold) compared to SA. The lower external resistance favored the growth of electrogens and induced higher electron flux, where the best treatment performance and electricity production was obtained when the external resistance approached the internal resistance. Overall, it was noteworthy that the optimum operating conditions were achieved with 5 d HRT, MA, and MC connection along with external resistance of 200 Ω, which significantly outperformed the initial conditions (1 d HRT, SA connection, and 1000 Ω) by 43.7 and 29.8% of caffeine and COD removal in the anaerobic compartment, respectively as well as 14-fold of power generation.
Artemisia arborescens, Artemisia abyssinica, Pulicaria jaubertii, and Pulicaria petiolaris are fragrant herbs traditionally used in medication and as a food seasoning. To date, there are no studies on the use of supercritical fluids extraction with carbon dioxide (SFE-CO2) on these plants. This study evaluates and compares total phenolic content (TPC), antioxidant activity by DPPH• and ABTS•+, antibacterial, and anti-biofilm activities of SFE-CO2 extracts. Extraction was done by SFE-CO2 with 10% ethanol as a co-solvent. A. abyssinica extract had the highest extraction yield (8.9% ± 0.41). The GC/MS analysis of volatile compounds identified 307, 265, 213, and 201compounds in A. abyssinica, A. arborescens, P. jaubertii, and P. petiolaris, respectively. The P. jaubertii extract had the highest TPC (662.46 ± 50.93 mg gallic acid equivalent/g dry extract), antioxidant activity (58.98% ± 0.20), and antioxidant capacity (71.78 ± 1.84 mg Trolox equivalent/g dry extract). The A. abyssinica and P. jaubertii extracts had significantly higher antimicrobial activity and were more effective against Gram-positive bacteria. B. subtilis was the most sensitive bacterium. P. aeruginosa was the most resistant bacterium. P. jaubertii extract had the optimum MIC and MBC (0.4 mg/ml) against B. subtilis. All SFE-CO2 extracts were effective as an anti-biofilm formation for all tested bacteria at 1/2 MIC. Meanwhile, P. jaubertii and P. petiolaris extracts were effective anti-biofilm for most tested bacteria at 1/16 MIC. Overall, the results indicated that the SFE-CO2 extracts of these plants are good sources of TPC, antioxidants, and antibacterial, and they have promising applications in the industrial fields.
Opportunities for funding Tourism SMEs are emerging globally due to the expansion of tourism sector. However, it is still being determined how these financial arrangements will be controlled at more significant sizes equitably. In the contemporary period, E7 economy is deficient in producing the financial resources to ensure the availability of funds for the acquisition of funds for tourism-based SMEs. However, this research tested the empirical position of cost of debt in E-7 economies during COVID-19 crises. Study findings have shown significant outcomes between the constructs. The variation of conditions, structural uncertainty, transection systems, and variation in support by the financial institution for tourism-based SMEs are the main reasons that lessen borrowing and lending system of funds, from banks to SMEs. However, theorists must revisit the transaction system of debt financing for SMEs. Policymakers are suggested to develop viable and SME system-friendly policies to finance through debt capital from the banks in the time of structural imposed crises, like COVID-19.
China's green growth has shown a trend of fluctuation year by year. Simultaneously, Chinese local governments have pursued simple economic growth driven by the interests of "political competition" for a long time, while the supervision of the ecological environment has been loosened and tightened. In this environment, financial development and technological innovation may easily become the accelerator of this phenomenon, thus exacerbating the fluctuation of green growth. To deeply excavate the key factors to achieve stable and sustained growth of green economy, based on the annual panel data of 30 provinces in China from 2011 to 2018, this paper studies the impact of financial development and technological innovation on the volatility of green growth using dynamic system GMM method. The findings of this paper are shown as follows: First, the expansion of financial institutions' scale will significantly enhance the volatility of green growth. Second, the increase in the scale of the stock market will also significantly cause green growth fluctuations. Third, the interaction between financial development and technological innovation can significantly weaken the volatility of green growth. Fourth, financial development measured by stock market indicators is more efficient than financial development measured by financial institutions indicators to curb the volatility of green growth. Fifth, the fluctuation of green growth in the previous period will reduce the volatility of green growth in the current period. This study provides new evidence for exploring the power source to promote the stability and sustainable growth of the green economy in the special stage of financial and technological integration. Controlling the development scale of financial institutions and removing their state preferences, expanding the development of capital markets, and deepening the integration of financial development and technological innovation are conducive to achieve stable green growth.
Amending polycyclic aromatic hydrocarbon (PAH)-contaminated soils with biochar may be cheaper and environmentally friendly than other forms of organic materials. This has led to numerous studies on the use of biochar to either bind or stimulate the microbial degradation of organic compounds in soils. However, very little or no attention have been paid to the fact that biochars can give simultaneous impact on PAH fate processes, such as volatilization, sorption and biodegradation. In this review, we raised and considered the following questions: How does biochar affect microbes and microbial activities in the soil? What are the effects of adding biochar on sorption of PAHs? What are the effects of adding biochar on degradation of PAHs? What are the factors that we can manipulate in the laboratory to enhance the capability of biochars to degrade PAHs? A triphasic concept of how biochar can give simultaneous impact on PAH fate processes in soils was proposed, which involves rapid PAH sorption into biochar, subsequent desorption and modification of soil physicochemical properties by biochar, which in turn stimulates microbial degradation of the desorbed PAHs. It is anticipated that biochar can give simultaneous impact on PAH fate processes in soils.
The present work focused on the utilization of three local wastes, i.e., rambutan (Nephelium lappaceum), langsat (Lansium parasiticum), and mango (Mangifera indica) wastes, as organic substrates in a benthic microbial fuel cell (BMFC) to reduce the cadmium and lead concentrations from synthetic water. Out of the three wastes, the mango waste promoted a maximum current density (87.71 mA/m2) along with 78% and 80% removal efficiencies for Cd2+ and Pb2+, respectively. The bacterial identification proved that Klebsiella pneumoniae, Enterobacter, and Citrobacter were responsible for metal removal and energy generation. In the present work, the BMFC mechanism, current challenges, and future recommendations are also enclosed.
Path analysis has been largely used in marketing research but has recently been applied in an environmental management context. This study evaluated the potential of path analysis in identifying the influence of moisture content on odor from decomposing food waste. Food waste with varying moisture content was monitored for odor concentration, microbial population density, oxygen uptake rate, volatile fatty acids, ammonia, and hydrogen sulfide. These various parameters were later analyzed using SmartPLS 3.0 software to produce the path analysis model using simultaneous equation modeling. Results indicate that odor concentration of food waste was not directly affected by moisture content (not significant, t-statistical 1.46 1.96) and subsequently odor. In order to manage food waste-related odors, it is recommended that the waste be kept at a moisture content lower than 40%. This is especially critical if prolonged storage is unavoidable.
Consumption of natural resources and waste generation continues to rise as the human population increases. Ever since the industrial revolution, consumers have been adopting a linear economy model based on the 'take-make-dispose' approach. Raw materials are extracted to be converted into products and finally discarded as wastes. Consequently, this practice is unsustainable because it causes a massive increase in waste production. The root problems of the linear system can be addressed by transitioning to a circular economy. Circular economy is an economic model in which wastes from one product are recycled and used as resources for other processes. This literature review discovers the potential of vermicompost as a sustainable strategy in circular economy and highlights the benefits of vermicompost in ensuring food security, particularly in improving agricultural yield and quality, as well as boosting crop's nutritional quality. Vermicompost has the potential to be used in a variety of ways in the circular economy, including for agricultural sustainability, managing waste, pollutant remediation, biogas production and animal feed production. The recycling of organic wastes to produce vermicompost can benefit both the consumers and environment, thus paving the way towards a more sustainable agriculture for the future.
The performance of Cu/TiO2/FA composite, a hybrid adsorbent-photocatalyst consisting of copper-doped titania particles supported on fly ash, was optimized, under visible light irradiation, for the removal of the model dye pollutant methyl orange (MO) by using a response surface methodology and Box-Behnken experimental design. Three independent variables were considered for the optimization study: catalyst/solvent dosage (0.5 - 2.0 g/L), irradiation time (30-120 min), and the initial concentration (5- 25 ppm) of the dye. A 99.91% rate of removal was achieved using 2 g/L dosage, 5 ppm initial concentration, and 100 min of irradiation time as the optimal operating conditions. The recorded trends support the hypothesis of a combined and synergic adsorption-photocatalytic degradation process which fully exploits the "capture and destroy" approach for pollutant removal.
Sustainable urban development has been a popular subject in urban studies and related disciplines. Owing to the challenges faced by cities worldwide to accommodate the growing urban populations, it is becoming ever more important for innovative research on sustainable urban development to be performed to help cities achieve sustainability. This study develops and tests an integrated approach to sustainable city assessment, which is a combination of importance-performance analysis (IPA) and modified analytic hierarchy process (AHP). Questionnaires designed following the IPA concept were distributed to residents of three cities. The importance scores from the collected data were factorized and the factors' relative scores were then calculated using a formula developed in this study to represent pairwise comparisons. The derived criteria weights were applied to the performance scores to evaluate the cities' relative overall sustainability performance. This approach replaces the AHP's 1-9 scale with the IPA's importance rating scale, which is a Likert scale, in the questionnaire. Based on the findings, implications and future research suggestions were provided.
This study conducts a comprehensive literature review of articles on the triple bottom line (TBL) published from January 1997 to September 2018 to provide significant insights and support to guide further discussion. There were three booms in TBL publications, occurring in 2003, 2011, and 2015, and many articles attempt to address the issue of sustainability by employing the TBL. This literature analysis includes 720, 132, and 58 articles from the Web of Science (WOS), Inspec, and Scopus databases, respectively, and reveals the gaps in existing research. To discover the barriers and points of overlap, these articles are categorized into six aspects of the TBL: economic, environmental, social, operations, technology, and engineering. Examining the top 3 journals in terms of published articles on each aspect reveals the research trends and gaps. The findings provide solid evidence confirming the argument that the TBL as currently defined is insufficient to cover the entire concept of sustainability. The social and engineering aspects still require more discussion to support the linkage of the TBL and to reinforce its theoretical basis. Additionally, to discover the gaps in the data sources, theories applied, methods adopted, and types of contributions, this article summarizes 82 highly cited articles covering each aspect. This article offers theoretical insights by identifying the top contributing countries, institutions, authors, keyword networks, and authorship networks to encourage scholars to push the current discussion further forward, and it provides practical insights to bridge the gap between theory and practice for enhancing the efficiency and effectiveness of improvements.
Nanomaterials are threatening the environment and human health, but there has been little discussion about the stability and mobility of nanoparticles (NPs) in saturated porous media at environmentally relevant concentrations of surfactants, which is a knowledge gap in exploring the fate of engineered NPs in groundwater. Therefore, the influences of the anionic surfactant (sodium dodecylbenzene sulfonate, SDBS), the cationic surfactant (cetyltrimethylammonium bromide, CTAB), and the nonionic surfactant (Tween-80) with environmentally relevant concentrations of 0, 5, 10, and 20 mg/L on nano-TiO2 (nTiO2, negatively charged) and nano-CeO2 (nCeO2, positively charged) transport through saturated porous media were examined by column experiments. On the whole, with increasing SDBS concentration from 0 to 20 mg/L, the concentration peak of nTiO2 and nCeO2 in effluents increased by approximately 0.2 and 0.3 (dimensionless concentration, C/C0), respectively, because of enhanced stability and reduced aggregate size resulting from enhanced electrostatic and steric repulsions. By contrast, the transportability of NPs significantly decreased with increasing CTAB concentration due to the attachment of positive charges, which was opposite to the charge on the medium surface and facilitated the NP deposition. On the other hand, the addition of Tween-80 had no significant influence on the stability and mobility of nTiO2 and nCeO2. The results were also demonstrated by the colloid filtration theory (CFT) modeling and the Derjaguin-Landau-Verwey-Overbeek (DLVO) interaction calculations; it might promote the assessment and remediation of NP pollution in subsurface environments.
This study explores the relationship between Entrepreneurship Education (EE) and Entrepreneurial Intentions (EI) using the Theory of Planned Behavior (TPB). From January through May of 2022, students from 10 Chinese institutions were surveyed using an online questionnaire. According to the research, students' EI scores rose significantly after participating in EE. In addition, students in China had a more significant impact on EI regarding factors like perceived feasibility and desirability. This study extends the body of knowledge about the connection between prior exposure and early intervention (EI) by demonstrating the beneficial effects of PE on EI. In addition, the results suggest that girls have lower EI than males, which is good news for gender equality. Lastly, the behavioral entrepreneur attitude has a favorable correlation with EI. Policymakers and university administrators might use the findings to understand better how and when extracurricular activities (EE) improve students' emotional intelligence (EI). A pioneering empirical study in a developing South-Asian setting shows the relevance of EE on EI among students at private universities. According to the study, EE generates EI, and entrepreneurial enthusiasm is crucial.
Sulfadimidine (SM2) is commonly used in the swine industry and enters the environment via faeces. In recent years, advances in the ecotoxicology of SM2 have become a popular research interest with two common research methods including swine manure collection from swine fed with a diet containing SM2 and directly adding SM2. The purpose of this experiment was to compare SM2 degradation behaviour in pig manure with two different SM2 addition methods. The results showed that the degradation half-lives of SM2 in manure from SM2-fed swine treatment were 33.2 and 32.0 days at the initial addition level of SM2 at 32.1 and 64.3 mg/kg, respectively. This was significantly longer than that in manure directly adding SM2 treatment with the half-lives of 21.4 and 14.8 days. The metabolite of SM2 N(4)-acetyl-sulfamethazine occurred in manure from SM2-fed swine treatment but was not detected in directly adding SM2 treatment. The pH in manure from SM2-fed swine treatment was significantly lower than that in directly adding SM2 treatment, but the values of organic carbon, total nitrogen, and electrical conductivity in manure from SM2-fed swine treatment were significantly higher than those in manure directly adding SM2 treatment. Meanwhile, although the copy number of bacteria had no significant difference between two treatments, there was a significant difference in bacteria diversity. Results of the present study demonstrated that the presence of the metabolites, chemical property, and microbial diversity might be the reason for different SM2 degradation behaviours on different addition methods. Thus, the method using manure with SM2 collected from swine could obtain more accurate results for the ecotoxicological study of SM2.
Using manure collected from swine fed with diet containing antibiotics and antibiotic-free swine manure spiked with antibiotics are the two common methods of studying the degradation behavior of veterinary antibiotic in manure in the environment. However, few studies had been conducted to co-compare these two different antibiotic addition methods. This study used oxytetracycline (OTC) as a model antibiotic to study antibiotic degradation behavior in manure under the above two OTC addition methods. In addition, the role of microorganisms present in the manure on degradation behavior was also examined. The results showed that degradation half-life of OTC in manure from swine fed OTC (9.04 days) was significantly shorter than that of the manure directly treated with OTC (9.65 days). Concentration of 4-epi-OTC in manure from swine fed OTC peaked earlier than that in manure spiked with OTC, and the degradation rates of 4-epi-OTC and α-apo-OTC in the manure from swine fed OTC were faster, but the peak concentrations were lower, than those in manure spiked with OTC. Bacterial diversity and relative abundance of Bacillus cereus data demonstrated that sterilization of the manure before experiment significantly decreased OTC degradation rate in both of the addition methods. Results of the present study demonstrated that the presence of the metabolites (especially 4-epi-OTC) and microorganisms had significant influence on OTC degradation.
The objective of this study was to examine the effects of adsorbability and number of sulfonate group on solar photocatalytic degradation of mono azo methyl orange (MO) and diazo Reactive Green 19 (RG19) in single and binary dye solutions. The adsorption capacity of MO and RG19 onto the TiO₂ was 16.9 and 26.8 mg/g, respectively, in single dye solution, and reduced to 5.0 and 23.1 mg/g, respectively, in the binary dye solution. The data obtained for photocatalytic degradation of MO and RG19 in single and binary dye solution were well fitted with the Langmuir-Hinshelwood kinetic model. The pseudo-first-order rate constants of diazo RG19 were significant higher than the mono azo MO either in single or binary dye solutions. The higher number of sulfonate group in RG19 contributed to better adsorption capacity onto the surface of TiO₂ than MO indicating greater photocatalytic degradation rate.
In this study, palm oil mill effluent (POME) treated by ultrasonication at optimum conditions (sonication power: 0.88 W/mL, sonication duration: 16.2 min and total solids: 6% w/v) obtained from a previous study was anaerobically digested at different hydraulic retention times (HRTs). The reactor biomass was subjected to metagenomic study to investigate the impact on the anaerobic community dynamics. Experiments were conducted in two 5 L continuously stirred fill-and-draw reactors R1 and R2 operated at 30 ± 2 °C. Reactor R1 serving as control reactor was fed with unsonicated POME with HRT of 15 and 20 days (R1-15 and R1-20), whereas reactor R2 was fed with sonicated POME with the same HRTs (R2-15 and R2-20). The most distinct archaea community shift was observed among Methanosaeta (R1-15: 26.6%, R2-15: 34.4%) and Methanobacterium (R1-15: 7.4%, R2-15: 3.2%). The genus Methanosaeta was identified from all reactors with the highest abundance from the reactors R2. Mean daily biogas production was 6.79 L from R2-15 and 4.5 L from R1-15, with relative methane gas abundance of 85% and 73%, respectively. Knowledge of anaerobic community dynamics allows process optimization for maximum biogas production.
In light of the adverse environmental impact of the R134a refrigerant, replacing it with a more environmentally friendly refrigerant has become imperative than ever. This study presents an experimental investigation into the utilization of R152a and R134a refrigerants in a vapor compression refrigeration system employing a variable displacement oil-free linear compressor. The potential for the replacement of R134a with R152a was examined based on energy, environmental, and economic performance analyses. The outcomes indicated that R152a exhibited a higher coefficient of performance (COP) in comparison to R134a under identical operating conditions. Specifically, when the pressure ratio was 2.0 and the piston stroke was 11 mm, R152a's COP was 13.0% higher than R134a. It was also discovered that reducing the operating stroke and increasing the pressure ratio could effectively lower CO2 emissions and total costs. Under the 2.0 pressure ratio and 9-mm piston stroke, R134a produced 1082.4 kg more CO2 emissions than R152a, representing a 209% increase. In addition, the R152a and R134a total cost was reduced by 8.3% with the 2.5 pressure ratio and 11-mm piston stroke. Notably, the results of the current study demonstrated that R152a outperformed R134a in energy consumption, environmental friendliness, and economy in oil-free linear compressor refrigeration systems. R152a used less electric power, generated fewer CO2 emissions, and naturally reduced predicted running costs in order to maintain the same COP.
Human usage of non-renewable energy resources has caused many environmental issues, which include air pollution, global warming, and climate irregularities. To counter these issues, researchers have been seeking after alternative renewable energy sources and ways to manage energy more efficiently. This is where energy recovery technologies such as waste heat recovery (WHR) come into play. WHR is a form of waste to energy conversion. Waste heat can be captured and converted into usable energy instead of dumping it into the environment. In the more recent years, the WHR research field has gained great attention in the scientific community as well as in some energy-intensive industries. This article presents a bibliometric overview of the academic research on WHR over the span of 30 years from 1991 to 2020. A total of 5682 documents from Web of Science (WoS) have been retrieved and analyzed using various bibliometric methods, including performance analysis and network analysis. The analyses were performed on different actors in the field, i.e., funding agencies, journals, authors, organizations, and countries. In addition, several network mappings were done based on co-citation, co-authorship, and co-occurrences of keywords analyses. The research identified the most productive and influential actors in the field, established and emergent research topics, as well as the interrelations and collaboration patterns between different actors. The findings can be a robust roadmap for further research in this field.