The use of natural ingredients for managing diabetes is becoming more popular in recent times due to the several adverse effects associated with synthetic antidiabetic medications. In this study, we investigated the in vitro antidiabetic potential (through inhibition of α-glucosidase (AG) and α-amylase (AA)) of hydrolysates from lupin proteins pretreated with ultrasound and hydrolyzed using alcalase (ACT) and flavourzyme (FCT). We further fractionated ACT and FCT into three molecular weight fractions. Unfractionated ACT and FCT showed significantly (p < 0.05) higher AG (IC50 value = 1.65 mg/mL and 1.91 mg/mL) and AA (IC50 value = 1.66 mg/mL and 1.98 mg/mL) inhibitory activities than their ultrafiltrated fractions, where lower IC50 values indicate higher inhibitory activities. Then, ACT and FCT were subjected to peptide sequencing using LC-MS-QTOF to identify the potential AG and AA inhibitors. Molecular docking was performed on peptides with the highest number of hotspots and PeptideRanker score to study their interactions with AG and AA enzymes. Among the peptides identified, SPRRF, FE, and RR were predicted to be the most active peptides against AG, while AA inhibitors were predicted to be RPR, PPGIP, and LRP. Overall, hydrolysates prepared from lupin proteins using alcalase and flavourzyme may be useful in formulating functional food for managing diabetics.
Street food is a major source of food in middle- and low-income countries as it is highly accessible and inexpensive. However, it is usually perceived as unhealthy due to the high levels of sodium, sugar, and fat content. However, there is little analytical data on the sodium levels in the street foods of Malaysia. This study started with a survey to determine the most frequently available street foods in every state in Malaysia, followed by food sampling and the analysis of sodium (reported mg/100 g sample). Street food in the snack category contained the highest amount of sodium (433 mg), followed by main meals (336.5 mg) and desserts (168 mg). Approximately 30% of the local street food in this study was deep-fried. Snacks from processed food (8%) contained high sodium content (500−815 mg). Fried noodles and noodle soup contained the highest amount of sodium (>2000 mg sodium) based on per serving. Most main dishes that use a variety of sauces contained high amounts of sodium. These findings were recorded in the Malaysian Food Composition Database. Moreover, this study could raise awareness and serve as baseline data for future interventions on the sodium content in the street foods of Malaysia.
Postprandial hyperglycaemia is associated with an increased risk of type-2 diabetes. This study aims to determine the glycaemic index (GI) of three varieties of rice-based mixed meals and their effects on glycaemic variability (GV), 24 h mean glucose levels and target ranges, and rice variety preferences among overweight and obese young adults using real-time continuous glucose monitoring (rtCGM). In a randomised controlled crossover design, 14 participants (22.8 ± 4.6 years, 32.9 ± 5.8 kg/m2) were randomly assigned to receive 3 rice-based mixed meals containing 50 g of available carbohydrates (white rice meal = WRM; brown rice meal = BRM; and parboiled basmati rice meal = PBRM) and 50 g of a glucose reference drink on alternate days. GI, GV, 24 h mean glucose levels and target ranges were measured. Rice variety preferences were compared with those of baseline data and determined at the end of the study period. Results: The analysis found that PBRM was low in GI (45.35 ± 2.06), BRM medium in GI (56.44 ± 2.34), and WRM high in GI (83.03 ± 2.19). PBRM had a significantly (p < 0.05) lower 24 h mean glucose level, higher in-target 24 h glucose level percentage and non-significantly (p > 0.05) lower GV compared to WRM. Prior to observing their postprandial glucose levels generated by rtCGM, the participants preferred WRM (64.3%) over other meals, whereas this preference changed significantly (p < 0.05) at the endpoint (PBRM, 71.4%). PBRM reduced 24 h glucose level and GV of overweight and obese young adults. The rtCGM is proven to be reliable in measuring GI, while providing robust continuous glycaemic information. This may serve as an educational tool that motivates eating behaviour changes among overweight and obese young adults.
Instant noodles are consumed worldwide, but instant noodles are often unhealthy. Therefore, in the current study, instant noodles were produced with composite flour (a blend of wheat flour and potato starch at weight ratios of 9:1, 8:2, and 7:3) incorporated with red seaweed powder (Eucheuma denticulatum) in proportions of 0, 5, 7.5, 10, 12.5, and 15%. The noodles’ sensory, physicochemical, and cooking properties were then determined. The incorporation of 7.5−15% of seaweed powder significantly (p < 0.05) increased the cooking yield, reduced the cooking loss, lengthened the cooking time, and decreased the pH values and water activity. The addition of seaweed powder weakened the tensile strength and softened the noodles. Seaweed noodles were denser and greener than control noodles. Among the three seaweed noodles (F2, F5, and F12) selected through the ranking test, panelists preferred F2 and F5 (both scoring 4.63 on a 7-point hedonic scale for overall acceptability) more than F12. Overall, F5 (at a wheat flour: potato starch ratio of 9:1; 15% seaweed powder) is the best-formulated seaweed noodle in this study, owing to its highest cooking yield and lowest cooking loss even with prolonged cooking, lowest water activity, and acceptable sensory qualities.
With the prevalence of edible diacylglycerol (DAG) oil, which is beneficial to human, the generation of 3-monochloropropanediol esters (3-MCPDE) and glycidyl esters (GE) as well as the stability of physical properties during heat-induced processing still need to be explored. In this study, the experiment used olive-based edible oil with different contents of DAG (40, 60, and 80%) to make crackers and fry chicken. They were heated at 160 and 180 °C to determine the changes in 3-MCPDE and GE, the crackers’ hardness and gumminess, and the physical properties of the oil. During baking and frying, 3-MCPDE decreased, while the content of GE slightly increased with the prolonged heating duration. Finally, 3-MCPDE and GE were lower than 1.25 mg/kg and 1.00 mg/kg, respectively. The AV increased proportionally as duration increased and POV was below 0.30 g/100 g. In general, the changes in 3-MCPDE and GE were related to the heating temperature and duration, and not significantly (p > 0.05) related to the content of DAG.
The safety, shelf life, and quality of fresh cow milk treated using industrial High-Pressure Processing (HPP) treatment at 600 MPa for 10 min was studied to identify the novelty of this non-thermal technology in milk processing. Changes in microbiological and physicochemical properties, including nutritional values of vitamins and amino acid profiles, were measured for a 60-day storage period at 6 °C +/- 1 °C. The HPP treatment produced milk that met all microbial safety requirements and exhibited a shelf life beyond 60 days in a hot and humid region. High physicochemical stability was achieved, with consistent pH and undetectable titratable acidity. The HPP treatment successfully retained all vitamins and minerals, including calcium (99.3%), phosphorus (99.4%), and magnesium (99.1%). However, the 60-day storage caused some degradation of Vitamin A (25%), B3 (91%), B5 (35%), B6 (80%), and C (85%), and minerals, including potassium (5%) and zinc (18%) when compared with fresh milk. This research has shown that the adoption of advanced treatment with HPP is very beneficial to the dairy industry in preserving milk quality in terms of its physicochemical and nutritional properties and extending its storage shelf life beyond 60 days.
Aspergillus niger is one of the major pathogenic fungi causing postharvest grape decay. The development of antifungal agents is beneficial to reduce the loss of grapes during storage. The aim of this study was to investigate the antifungal mechanism of cyclosporin A (CsA). It was indicated that the rot development on grapes caused by A. niger was almost completely inhibited with CsA in vivo at a concentration of 200 mg/L. The transcriptomic analysis revealed that the expression levels of genes involved in rRNA processing and ribosome biogenesis were down-regulated, whereas those related to β-glucosidases and chitinases were up-regulated. The results implied that CsA may disturb rRNA and ribosome formation to obstruct protein synthesis, accelerate chitin and glucan degradation to destruct cell walls, and ultimately reduce postharvest decay caused by A. niger in grapes. This study evaluated the potential of CsA as a grape preservative and provided new insights into the mechanisms underlying the molecular response in A. niger with the treatment of CsA.
Despite growing evidence of increased saturated and trans fat contents in street foods, little is known about their fatty acid (FA) compositions. This study aimed to analyse the saturated fatty acids (SFAs), monounsaturated fatty acids (MUFAs), polyunsaturated fatty acids (PUFAs), and trans fatty acids (TFAs) content of 70 selected and most commonly available street foods in Malaysia. The street foods were categorised into main meals, snacks, and desserts. TFAs were not detected in any of the street foods. Descriptively, all three categories mainly contained SFAs, followed by MUFAs, and PUFAs. However, the one-way ANOVA testing showed that the differences between each category were insignificant (p > 0.05), and each FA was not significantly different (p > 0.05) from one to another. Nearly half of the deep-fried street foods contained medium to high SFAs content (1.7 g/100 g-24.3 g/100 g), while the MUFAs were also high (32.0-44.4%). The Chi-square test of association showed that the type of preparation methods (low or high fat) used was significantly associated (p < 0.05) with the number of SFAs. These findings provide valuable information about fat composition in local street foods for the Malaysian Food Composition Database and highlight the urgency to improve nutritional composition.
In recent years, downstream bioprocessing industries are venturing into less tedious, simple, and high-efficiency separation by implementing advanced purification and extraction methods. This review discusses the separation of proteins, with the main focus on amylase as an enzyme from agricultural waste using conventional and advanced techniques of extraction and purification via a liquid biphasic system (LBS). In comparison to other methods, such as membrane extraction, precipitation, ultrasonication, and chromatography, the LBS stands out as an efficient, cost-effective, and adaptable developing method for protein recovery. The two-phase separation method can be water-soluble polymers, or polymer and salt, or alcohol and salt, which is a simpler and lower-cost method that can be used at a larger purification scale. The comparison of different approaches in LBS for amylase purification from agricultural waste is also included. Current technology has evolved from a simple LBS into microwave-assisted LBS, liquid biphasic flotation (LBF), thermoseparation (TMP), three-phase partitioning (TPP), ultrasound-assisted LBS, and electrically assisted LBS. pH, time, temperature, and concentration are some of the significant research parameters considered in the review of advanced techniques.
Although dark muscle is currently the most important obstacle in marketing high-quality Indian mackerel (Rastrelliger kanagurta) surimi, reducing washing remains a challenge for long-term surimi production from this species. Herein, the impact of washing cycles (one (W1), two (W2), and three (W3) cycles) with a 1:3 mince to water ratio on the bio-physico-chemical properties, rheology, and gelling ability of mackerel surimi was evaluated. The yield, Ca2+-ATPase activity, TCA-soluble peptide, and myoglobin contents of surimi decreased as the number of washing cycles increased, while lipid removal, reactive SH content, and surface hydrophobicity of surimi increased. Surimi generated by W2 and W3 provided the same rheological patterns and Fourier-transform infrared spectroscopy (FTIR) spectra as unwashed mince, with the highest gel strength and whiteness, as well as the lowest expressible drip, thiobarbituric acid reactive substances (TBARS), and fishy odor. Sodium dodecyl sulfate-polyacrylamide gel electrophoresis (SDS-PAGE) demonstrated the presence of polymerized proteins stabilized by disulfide and other interactions. Using a scanning electron microscope, several concentrated dense areas and distributed pores generated by myofibrillar proteins gel networks were found. Surimi from W2 and W3 appeared to be of similar overall quality, however W2 had a larger yield. As a result of the evaluation of bio-physico-chemical, rheological, and gel-forming capabilities, as well as product yield, W2 may be the best option for producing high-quality surimi from Indian mackerel in a sustainable manner.
Spray drying techniques are one of the methods to preserve and extend the shelf-life of coconut milk. The objective of this research was to create a particle swarm optimization-enhanced artificial neural network (PSO-ANN) that could predict the coconut milk spray drying process. The parameters for PSO tuning were selected as the number of particles and acceleration constant, respectively, for both global and personal best using a 2k factorial design. The optimal PSO settings were recorded as global best, C1 = 4.0; personal best, C2 = 0; and number of particles = 100. When comparing different types of spray drying models, PSO-ANN had an MSE value of 0.077, GA-ANN had an MSE of 0.033, while ANN had an MSE of 0.082. Sensitivity analysis was conducted on all three models to evaluate the significance level of each parameter on the model, and it was discovered that inlet temperature had the most significant influence on the model performance. In conclusion, the PSO-ANN was found to be more effective than ANN but less effective than GA-ANN in predicting the quality of coconut milk powder.
The management of insect pests and fungal diseases that cause damage to crops has become challenging due to the rise of pesticide and fungicide resistance. The recent developments in studies related to plant-derived essential oil products has led to the discovery of a range of phytochemicals with the potential to combat pesticide and fungicide resistance. This review paper summarizes and interprets the findings of experimental work based on plant-based essential oils in combination with existing pesticidal and fungicidal agents and novel bioactive natural and synthetic molecules against the insect pests and fungi responsible for the damage of crops. The insect mortality rate and fractional inhibitory concentration were used to evaluate the insecticidal and fungicidal activities of essential oil synergists against crop-associated pests. A number of studies have revealed that plant-derived essential oils are capable of enhancing the insect mortality rate and reducing the minimum inhibitory concentration of commercially available pesticides, fungicides and other bioactive molecules. Considering these facts, plant-derived essential oils represent a valuable and novel source of bioactive compounds with potent synergism to modulate crop-associated insect pests and phytopathogenic fungi.
Durian (Durio zibethinus Murr.) is an energy-dense seasonal tropical fruit grown in Southeast Asia. It is one of the most expensive fruits in the region. It has a creamy texture and a sweet-bitter taste. The unique durian flavour is attributable to the presence of fat, sugar, and volatile compounds such as esters and sulphur-containing compounds such as thioacetals, thioesters, and thiolanes, as well as alcohols. This review shows that durian is also rich in flavonoids (i.e., flavanols, anthocyanins), ascorbic acid, and carotenoids. However, limited studies exist regarding the variation in bioactive and volatile components of different durian varieties from Malaysia, Thailand, and Indonesia. Experimental animal models have shown that durian beneficially reduces blood glucose and cholesterol levels. Durian extract possesses anti-proliferative and probiotics effects in in vitro models. These effects warrant further investigation in human interventional studies for the development of functional food.
The presence of drug residues in food products has become a growing concern because of the adverse health risks and regulatory implications. Drug residues in food refer to the presence of pharmaceutical compounds or their metabolites in products such as meat, fish, eggs, poultry and ready-to-eat foods, which are intended for human consumption. These residues can come from the use of drugs in the field of veterinary medicine, such as antibiotics, antiparasitic agents, growth promoters and other veterinary drugs given to livestock and aquaculture with the aim of providing them as prophylaxis, therapy and for promoting growth. Various analytical techniques are used for this purpose to control the maximum residue limit. Compliance with the maximum residue limit is very important for food manufacturers according to the Food and Drug Administration (FDA) or European Union (EU) regulations. Effective monitoring and control of drug residues in food requires continuous advances in analytical techniques. Few studies have been reviewed on sample extraction and preparation techniques as well as challenges and future directions for the determination of veterinary drug residues in food. This current review focuses on the overview of regulations, classifications and types of food, as well as the latest analytical methods that have been used in recent years (2020-2023) for the determination of drug residues in food so that appropriate methods and accurate results can be used. The results show that chromatography is still a widely used technique for the determination of drug residue in food. Other approaches have been developed including immunoassay, biosensors, electrophoresis and molecular-based methods. This review provides a new development method that has been used to control veterinary drug residue limit in food.
Fermentation of milk enhances its nutritional and biological activity through the improvement of the bioavailability of nutrients and the production of bioactive compounds. Coconut milk was fermented with Lactiplantibacillus plantarum ngue16. The aim of this study was to evaluate the effect of fermentation and cold storage for 28 days on physicochemical characteristics, shelf life, and antioxidant and antibacterial activities of coconut milk as well as its proximate and chemical compositions. The pH of fermented milk decreased from 4.26 to 3.92 on the 28th day during cold storage. The viable cell count of lactic acid bacteria (LAB) in fermented coconut milk was significantly increased during fermentation and cold storage period (1 to 14 days), reaching 6.4 × 108 CFU/mL, and then decreased significantly after 14 days to 1.6 × 108 CFU/mL at 28 days. Yeast and molds in fermented coconut milk were only detected on the 21st and 28th days of cold storage, which ranged from 1.7 × 102 to 1.2 × 104 CFU/mL, respectively. However, the growth of coliforms and E. coli was observed on the 14th until the 28th day of cold storage. The fermented coconut milk demonstrated strong antibacterial activity against Staphylococcus aureus, Bacillus subtilis, Escherichia coli, Cronobacter sakazakii, Bacillus cereus, and Salmonella typhimurium compared to fresh coconut milk. Fermented coconut milk had the greatest 1,1-diphenyl-2-picrylhydrazyl (DPPH) and ferric reducing antioxidant power (FRAP) values, with 67.1% and 61.961 mmol/g at day 14 of cold storage, respectively. Forty metabolites were detected in fermented and pasteurized coconut milk by proton nuclear magnetic resonance (1H NMR) metabolomics. The principal component analysis (PCA) showed clear difference between the fermented and pasteurized coconut milk as well as the studied cold storage days. The metabolites responsible for this variation were ethanol, valine, GABA, arginine, lactic acid, acetoin, alanine, phenylalanine, acetic acid, methionine, acetone, pyruvate, succinic acid, malic acid, tryptophan, uridine, uracil, and cytosin, which were higher in fermented coconut milk. However, sugars and other identified compounds were higher in fresh coconut milk. The findings of this study show that fermentation of coconut milk with L. plantarum ngue16 had high potential benefits to extending its shelf life and improved biological activities as well as other beneficial nutrients.
Curcumin-loaded solid lipid nanoparticles (Cur-SLN) were prepared using medium- and long chain diacylglycerol (MLCD) or glycerol tripalmitate (TP) as lipid matrix and three kinds of surfactants including Tween 20 (T20), quillaja saponin (SQ) and rhamnolipid (Rha). The MLCD-based SLNs had a smaller size and lower surface charge than TP-SLNs with a Cur encapsulation efficiency of 87.54-95.32% and the Rha-based SLNs exhibited a small size but low stability to pH decreases and ionic strength. Thermal analysis and X-ray diffraction results confirmed that the SLNs with different lipid cores showed varying structures, melting and crystallization profiles. The emulsifiers slightly impacted the crystal polymorphism of MLCD-SLNs but largely influenced that of TP-SLNs. Meanwhile, the polymorphism transition was less significant for MLCD-SLNs, which accounted for the better stabilization of particle size and higher encapsulation efficiency of MLCD-SLNs during storage. In vitro studies showed that emulsifier formulation greatly impacted on the Cur bioavailability, whereby T20-SLNs showed much higher digestibility and bioavailability than that of SQ- and Rha-SLNs possibly due to the difference in the interfacial composition. Mathematical modeling analysis of the membrane release further confirmed that Cur was mainly released from the intestinal phase and T20-SLNs showed a faster release rate compared with other formulations. This work contributes to a better understanding of the performance of MLCD in lipophilic compound-loaded SLNs and has important implications for the rational design of lipid nanocarriers and in instructing their application in functional food products.
The present field-based study aimed to determine the levels of six potentially toxic metals (PTM)s (Cd, Cu, Fe, Ni, Pb, and Zn determined using a flame atomic-absorption spectrophotometer) using transplanted green-lipped mussel Perna viridis from a polluted site at Kampung Pasir Puteh (KPP) to unpolluted sites at Kampung Sungai Melayu (KSM) and Sungai Belungkor (SB) in the Johore Straits (SOJ), and to estimate the human health risks of the PTMs after the depuration periods. Interestingly, after 10 weeks of depuration in the two unpolluted sites, there were 55.6-88.4% and 51.3-91.7% reductions of the six PTMs after transplantation from KPP to SB and KSM, respectively. Lower risks of health assessments were recorded and judged on the present findings of significantly (p < 0.05) lower levels of safety guidelines, significantly (p < 0.05) lower values of target hazard quotient, and significantly (p < 0.05) lower values of estimated weekly intake, of all the six PTMs after 10 weeks of depuration of the transplanted polluted mussels to the two unpolluted sites in the SOJ. Thus, further reducing the noncarcinogenic risks of the PTMs to the consumers. From an aquacultural point of view, this depuration technique can be recommended to reduce the health risks of PTMs to mussel consumers.
Heat treatment could affect the structure and properties of rice varieties. The present study was conducted in order to determine the effects of heat treatment on the physicochemical properties and tissue structure of Mahsuri Mutan, Basmati 370 and MR219 rice varieties. The three rice varieties were subjected to heat treatment (ageing) at 90 °C, using an oven, for 3 h. After the heat treatment, the samples were cooled at room temperature (25 °C) for 1 h. Physicochemical properties, such as alkali digestion value, water uptake ratio, solids in cooking water, high kernel elongation ratio and amylose contents, were determined. The procedure used in determining both apparent and absolute amylose involved measuring the iodine affinity of defatted whole starch. Ahigh-performance anion-exchange chromatograph was used to analyse branch chain length distribution of amylopectin quantitatively. The starch structure of the rice samples was observed under a scanning electron microscope. Data collected on physicochemical traits, heat treatment and control (ageing and non-ageing) were subjected to an analysis of variance using SAS software version 9.4. In this study, Mahsuri Mutan and Basmati 370 showed superior high kernel elongation as compared to their respective rice progenies. This study also found that heat treatment directly affected the increasingly high kernel elongation for both populations. The phenotypic correlation co-efficient indicated that there was a high positive correlation between high kernel elongation and water uptake ratio, implying that selection for water uptake ratio would increase the high kernel elongation characteristic. The heat treatment showed significant difference in all the physicochemical traits of the varieties studied. Heat treatment also affected the very long branch chains of starch, such as amylose. Observation under an electron microscope showed that the samples subjected to heat treatment had more cracks on the tissue structure compared to normal rice samples. The hexagon structure in Mahsuri Mutan produced a greater elongation effect on its kernel. The findings from this study could be useful to breeders in the selection and development of a new high kernel elongation rice variety.
The peel and core discarded from the processing of MD2 pineapple have the potential to be valorized. This study evaluated the functional and volatile compounds in the extracts of MD pineapple peel and core (MD2-PPC). The total soluble solids, pH, titratable acidity, sweetness index, and astringency index were 9.34 °Brix, 4.00, 0.74%, 12.84, and 0.08, respectively, for the peel and 12.00 °Brix, 3.96, 0.32%, 37.66, and 0.03, respectively, for the core. The fat and protein contents of the peel and core were found to be significantly different (p < 0.05). The total phenolic (TPC) and flavonoid contents (TFC) were significantly higher in the peel. The peel also showed better antioxidant activity, with a half-maximal inhibitory concentration (IC50) of 0.63 mg/mL for DPPH free radical activity compared with the core. The TPC of different phenolic fractions from peel extract was highest in the glycosylated fraction, followed by the esterified, insoluble-bound, and free phenolic fractions. GC-MS analysis identified 38 compounds in the peel and 23 in the core. The primary volatile compounds were 2-furan carboxaldehyde, 5-(hydroxymethyl), and 2,3-dihydro-3,5-dihydroxy-6-methyl-4H-pyran-4-one (DDMP). The identification of phenolics and volatile compounds provides important insights into the valorization of (MD2-PPC) waste.
Nitrite is a common color and flavor enhancer in fermented meat products, but its secondary amines may transfer to the carcinogen N-nitrosamines. This review focuses on the sources, degradation, limitations, and alteration techniques of nitrite. The transition among NO3- and NO2-, NH4+, and N2 constitutes the balance of nitrogen. Exogenous addition is the most common source of nitrite in fermented meat products, but it can also be produced by contamination and endogenous microbial synthesis. While nitrite is degraded by acids, enzymes, and other metabolites produced by lactic acid bacteria (LAB), four nitrite reductase enzymes play a leading role. At a deeper level, nitrite metabolism is primarily regulated by the genes found in these bacteria. By incorporating antioxidants, chromogenic agents, bacteriostats, LAB, or non-thermal plasma sterilization, the amount of nitrite supplied can be decreased, or even eliminated. Finally, the aim of producing low-nitrite fermented meat products is expected to be achieved.