In this study polymer electrolytes composed of poly(methyl methacrylate) (PMMA) as a host polymer and ethylene carbonate (EC) as a plasticizer complexed with different lithium salts, i.e. lithium tetrafluoroborate (LiBF4) and lithium triflate (LiCF3SO3) were prepared by the solution casting technique. The conductivities of the films were characterized by impedance spectroscopy. At room temperature, the highest conductivities were 4.07 × 10–7S cm–1 and 3.40 × 10–5 S cm–1 achieved, respectively from the films containing 30 wt% LiBF4 in the PMMA-EC-LiBF4 system and 35 wt% LiCF3SO3 in the PMMA-EC-LiCF3SO3 system. The conductivity-temperature dependence of the films seemed to obey the Arrhenius equation in which the ion transport in these materials was thermally assisted. Scanning electron microscopy analysis showed that the surface of PMMA-EC-LiCF3SO3 film was smooth and homogeneous, hence lithium ions could traverse through the PMMA-EC-LiCF3SO3 film more easily compared to the PMMA-EC-LiBF4 film. X-Ray diffraction studies revealed that complexation had occurred and the complexes formed were amorphous.
Solvent flow reactor system was introduced into the extraction system to increase the system efficiency and enhance the extraction yield by adding fresh solvent during the extraction processes. The liquefaction experiment was carried out at various flow-rates (1, 3 and 5 ml/min), reaction times (30, 45 and 60 min) and reaction temperatures (300ºC, 350ºC, 400ºC, 420ºC and 450ºC) with tetralin as solvent. Despite the ability of adding fresh solvent into the extraction process, the conversion of oil+gas was still considered to be low as there was ~25% of coal extracts left to be converted into low molecular weight compounds. One possible option to increase the oil yield is by applying catalyst that will further break up the coal extracts into small molecular weight compounds. In this study, a second reactor was introduced consisting of catalyst (NiSiO2) assuming that the catalyst would interact more effectively with coal extracts rather than the coal itself. In the
absence of catalyst, the oil yield was 55%. By introducing the Ni catalyst, the oil yield increased by 15%. Further analysis of GCMS showed that the oil from catalytic liquefaction gave out more low molecular weight compounds in comparison to the un-catalytic liquefaction oil.
In this study, the implementation of the Regional Climate Model into the hydrodynamic model has been applied for streamflow projection on a river located at the south of Peninsular Malaysia within the years 2070 till 2099. The data has been obtained from a Regional Climate Model (RCM), named Précis, on a daily basis. It begins by comparing historical rainfall data generated from Précis versus the actual gauged recorded rainfall data from Department of Irrigation and Drainage Malaysia (DID). The bias of the generated rainfall data has been reduced by statistical techniques. The same has been applied to the future generated rainfall data from 2070 to 2099. Using the generated precipitation data as input to the hydrological model, results in the daily output of river discharge identified as the main contributor of flood occurrences. Based on the results of the hydrological model utilised, e.g. HEC-HMS, comparison was made between the future and historical generated discharge data using Précis between the years 1960 till 1998. Dividing a year into three segments, e.g. January-April, May-August, SeptemberDecember, the results show that there would be a significant drop of peak discharge in the third segment and an increase in discharge during the second segment. The first part remains almost with no changes. As an addition, the drop of the peak shows reduction in the probability of flood occurrences. It also indicates the reduction in water storage capacity which coherently affects the water supply scheme
The global production of aviation fuel, particularly Kerosene Jet A-1, has a market presence of 302.8
billionlitres per year, of which Malaysia consumes up to 3 billion litres per year. The pressure from
increasing fuel demand and commitment to reducing CO2 emissions has led to the use of biofuels as
possible alternatives. Malaysia possesses a relative abundance of lignocellulosic biomass residues and
thus, has much potential in biofuel development. In this work, Geospatial Information System analysis
was used to obtain the geo-location biomass supply cost and was then simulated with non-linear cost
estimation modeling for biorefinery production. The spatial analysis suggested that paddy and oil palm
trunk could offer significant feedstock volumes at reasonable costs while biomass to fuel conversion
pathways comparison showed that an “alcohol to jet” route was more feasible among all the alternatives.
The simulation results indicated that the production cost of a bioethanol refinery had high variability
due to the geographical heterogeneity of the lignocellulosic biomass resources. At the optimal location
of paddy residues, utilising rice stalks was substantially cost-efficient compared to other biomass. The
lowest range of relative production cost was achieved at RM359.11 – RM726.41/million tonnes per
annum at an input capacity of 1.28 – 2.63 million tonnes. Conversely, using oil palm trunks in the same
location gave a much more expensive relative production cost of RM472.23 – RM986.63/million tonnes
yearly with only 0.40 – 1.03 million tonnes of input capacity. This model was able to suggest location
strategies and cost estimations for biorefineries in Peninsular Malaysia. It is hence, useful as a decision
and policy making tool for the implementation of biorefineries for aviation uses.
Herein, we report the synthesis of a thiosemicarbazide derivatives, namely 4-(2-
fluorophenyl) thiosemicarbazide from the reaction between 2-fluorophenyl isothiocyanate and
hydrazine hydrate. The isolated solid compound was elucidated from micro-elemental analysis
and IR spectroscopy. The structure of the molecule in the ground state was calculated
using density functional theory (DFT) method and basic set of 6-311G (d,p) was used to
calculate the energy gap (4Egap), hardness (η), softness (σ) and the global electronegativity
(χ). Its electrostatic potential mapping and frontier orbital energy analysis were also
discussed. The interaction of the molecule with selected proteins are investigated using
SwissTargetPrediction database.
This research was focused on the thermoluminescence (TL) response of commercially produced single-mode telecommunication optical fibre manufactured by INOCORP (Canada). The fibres were either in the form of pure silica (SiO2) or as SiO2 doped with Ge or Al at concentrations appropriate for total internal reflection, as required for telecommunication purposes. Each of these INOCORP fibres had a core diameter of 125 ± 0.1 μm. It was noted that dopant concentration was not included among the data provided in the accompanying product data sheet. A particularly important parameter for obtaining the highest TL yield in this study was the dopant concentration of the SiO2 fibre. The dopants tended to diffuse during the production of the optical fibre. To obtain this parameter, proton induced X-ray emission (PIXE) analysis was utilised. PIXE while having limited depth resolution could unambiguously identify elements and analyse trace elements with a detection limit approaching μg g–1. For Al-doped fibres, dopant concentrations in the range of 0.98 – 2.93 mol% had been estimated, the equivalent range for Ge-doped fibres was 0.53 – 0.71 mol%. A linear dose response was observed following 2.5 MeV proton irradiation for Ge- and Al-doped fibres for up to 7 min exposure.
Molecular dynamics reaction simulation showed that the rate constant is not constant over the concentration profile of reactants and products over a fixed temperature regime, and this variation is expressed in terms of the defined reactivity coefficients. The ratio of these coefficients for the forward and backward reactions were found to equal that of the activity coefficient ratio for the product and reactant species. A theory was developed to explain kinetics in general based on these observations. Several other theorems had first to be developed, most striking of all was the inference that the excess Helmholtz free energy was the thermodynamical function which had a direct relation to these activity factors than the Gibbs free energy. The theory is applied to a class of ionic reactions which could not be rationalized using the standard Bjørn-Bjerrum theory of ionic reactions.
The effect of chemical reaction and variable viscosity on mixed convection heat and mass transfer for Hiemenz flow over a porous wedge plate was studied in the presence of heat radiation. The wall of the wedge was embedded in a uniform Darcian porous medium to allow for possible fluid wall suction or injection and had a power-law variation of both the wall temperature and concentration. The fluid was assumed to be viscous and incompressible. Numerical calculations were carried out for different values of dimensionless parameters and an analysis of the results obtained showed that the flow field was influenced appreciably by the buoyancy ratio between species, thermal diffusion and suction/injection at wall surface. The effects of these major parameters on the transport behaviours were investigated methodically and typical results illustrated to reveal the tendency of the solutions. Representative results are presented for the velocity, temperature, and concentration distributions. Comparisons with previously published works were performed and excellent agreement between the results were obtained. It is predicted that this research might prove to be useful for study of the movement of oil or gas and water through the reservoir of an oil or gas field, in the migration of underground water, in filtration, and water purification processes.
As we move towards the knowledge (K) era, the challenge in R&D is to focus on the development of original K-based products that can compete in the global market. The development of commercially viable, patented K-based products within a university environment require an innovation system and innovation policies in place and a change in the paradigm towards the approach to research. A crucial agent towards the success of the innovation system is development and training of the human capital that would be the future drivers of the K-industry. Awareness of intellectual property rights, the need for original research, entrepreneurship as well as the development and strengthening of self-confidence and leadership are among the factors needed towards the training of K-workers facing the new economy.
The present work discusses the structural studies of dual blended solid biopolymer electrolytes
(SBEs) based carboxymethyl cellulose (CMC)/chitosan (CS) doped with various
ammonium bromide (AB) composition using solution casting technique. X-ray Diffraction
(XRD) result reveal that all samples are completely amorphous except for sample Ab-30.
FTIR analysis shows interaction has occurred between CMC/CS and NH4Br. Analysis of
transport properties has shown that the dependency of ionic conductivity was on the ionic
mobility, µ and diffusion coefficient, D of mobile ion.
Nowadays, the wireless technology has become a lifestyle; even the children have their own
mobile phones, although they are categorized as high risk susceptible to health problems
due to radiation. Thus, the public exposure that stemmed from electromagnetic radiations
become public concern since studies have been done and the finding showed that the repetitive
and long term exposure may have adverse health effect. This study was conducted to
evaluate the exposure level at UMT and UniSZA campuses by measuring the electric field
strength. This measurement was conducted using omni-directional antenna below 4 GHz,
connected to spectrum analyzer. In this paper, the measured values are compared with
the previous study from several locations and then the spatial maps of exposure level are
developed. The result shows that high exposure level was recorded at UMT and UniSZA.
From this study, the findings may assist the Ministry of Health to monitor the public health
due to non-ionizing radiation (NIR) exposure. This is crucial to make sure the international
commission of non-ionizing radiation protection (ICNIRP) limit is complied. Moreover, the
development of public NIR exposure policy can be initiated to the Malaysia government for
health concern. For future study, the investigation of the suitable material used as antenna
and casing or exposure reduction tool can be done to reduce NIR exposure rate on human
body.
3-Nitro-2-phenoxypyridine and 3-nitro-2-(4-methyl)phenoxypyridine were obtained when 2-chloro-3-nitropyridine was treated with phenol and p-cresol, respectively. Fluorescence studies were carried out in various solvents, in capped and uncapped conditions and for differing concentrations. Both 3-nitro-2-phenoxypyridine and 3-nitro-2-(4-methyl)phenoxypyridine were fluorescent compounds but 3-Nitro-2-(4-methyl)phenoxypyridine was more fluorescent than 3-nitro-2-phenoxypyridine in all the solvents used. The fluorescence intensity decreased with concentration and time.
The first time I visited Kuching, Sarawak, was in the 1980s. I then worked for the Rubber Research Institute of
Malaysia. In the 1980s, Kuching was a small town. I remember that then, the route going to the airport was lined with
shops selling the famous Sarawak vases. They were a big hit among visitors. A visit to Sarawak was not complete
without taking back a set of the black-and-white vases. They came in many shapes and sizes(Copied from article).
Introducing CO2 flux as the carbonate source had an effect on the carbonate content of carbonate apatite (CAp) synthesized by solid state reaction. The reactants were CaCO3 and beta-tricalcium phosphate (β-TCP) and the heat treatment in air was performed at 1250ºC followed by instant cooling in CO2 flux for temperatures ranging from 800ºC room temperature (RT) . The influence of CO2 flux at various temperature drop differences in the cooling process (1250ºC RT, 1250ºC–500ºC, 1250ºC–600ºC, 1250ºC–700ºC, and 1250ºC–800ºC) was tested to optimize the carbonation degree and subsequent effects on the physical and mechanical properties of CAp. Thermally treated samples revealed an increasing degree of carbonation, achieving a maximum of 5.2 wt% at the highest (1250ºC RT) and a minimum of 2.7 wt% at the lowest (1250ºC–800ºC) temperature drop differences, respectively. This showed that the carbonate content was correlated with the increase in exposure to CO2 flux. However, consistent compressive strength, tensile strength, density and porosity were observed against increasing temperature drop differences which indicated that the degree of carbonation exerted no influence on the physical and mechanical properties of CAp. This method enabled the synthesis of solid state CAp simply by exposing calcium phosphate mixtures to CO2 flux. It also allowed the control of carbonate content for desired medical applications.
In this paper, an improved method of reducing ambient noise in speech signals is introduced. The proposed noise canceller was developed using a computationally efficient (DFT) filter bank to decompose input signals into sub-bands. The filter bank was based on a prototype filter optimized for minimum output distortion. A variable step-size version of the (LMS) filter was used to reduce the noise in individual branches. The subband noise canceller was aimed to overcome problems associated with the use of the conventional least mean square (LMS) adaptive algorithm in noise cancellation setups. Mean square error convergence was used as a measure of performance under white and ambient interferences. Compared to conventional as well as recently developed techniques, fast initial convergence and better noise cancellation performances were obtained under actual speech and ambient noise.
In this study, Global Positioning System (GPS) simulation was employed to study the effect of radio frequency interference (RFI) on two hand-held GPS receivers; Garmin GPSmap 60CSx (evaluated GPS receiver) and Garmin GPSmap 60CS (reference GPS receiver). Both GPS receivers employed the GPS L1 coarse acquisition (C/A) signal. It was observed that the interference signal power levels required to affect the location fixes of the GPS receivers were significantly high compared to the corresponding GPS signal power levels. The noiselike C/A code structure, which modulated the L1 signal over a 2 MHz bandwidth, allowed for the signal to be received at low levels of interferences. The evaluated GPS receiver had better RFI operability as compared to the reference GPS receiver. This is because the evaluated GPS receiver had higher receiver sensitivity, allowing it to have increased carrier-to-noise density (C/N0) levels for GPS satellites tracked by the receiver. The absence of other error parameters, including ionospheric and tropospheric delays, satellite clock, ephemeris and multipath errors, and unintentional signal interferences and obstructions, resulted in the required minimum jamming power levels in this study to be significantly higher as compared to field evaluations. These minimum jamming power levels vary with location and time. This was due to the GPS satellite constellation being dynamic, causing varying GPS satellite geometry over location and time, resulting in the minimum required GPS jamming power levels being location / time dependent. In general, the lowest minimum jamming power levels were observed for readings with the highest position dilution of precision (PDOP) values, and vice versa.
The Ministry of Science Technology and Innovation (MOSTI) Angkasawan (Astronaut) Programme achieved its mission to send the first Malaysian astronaut Sheikh Muszaphar Shukur by Soyuz TM11 to the International Space Ship (ISS) on 10 October 2007. He returned to earth, landing safely on 21 October 2007. Such a momentous event has carved out yet another milestone in the country’s
history and development of a civilisation based on science and technology for its people. This mission has provided the educational sector with an opportunity to initiate a curriculum innovation. Together with the Ministry of Education (MOE), the initiative was undertaken to improve techniques of teaching and learning (TL) and to broaden its scope to include space science and technology.
Supercapacitors attract great interest among researchers as energy storage devices due to
their high power capability and long cycle life. In this research, the electrochemical performance
of electrical double layer capacitor (EDLC) based solid bio-polymer electrolyte
(SBE) was studied. SBE consists of carboxymethyl cellulose (CMC) and ammonium nitrate
(NH4NO3) was prepared by solution casting technique. The electrical impedance spectroscopy
was used to verify the conductivity of SBE. The average conductivity was achieved
at ∼ 10−3 S/cm. This research aims to prepare SBE and apply in the fabrication of EDLC.
Scanning electron microscopy analysis showed the smooth and homogeneous surface of SBE
film without any phase separation, while irregular shape and sizes of particles was found
on the surface of electrode. Elemental identification results yielded that all corresponding
elements presence in the SBE and electrode. The EDLC performance was characterized
using galvanostatic charge-discharge at different constant currents. Charge-discharge studies
showed that long discharge time (90 minutes) within 11 cycle was observed at 2µA. The
highest specific capacitance of 1.8 F/g was discovered at 4µA. This study showed that EDLC
based SBE has a promising potential to be applied in low current applications.
In this multiple-subject study, intrinsic couplings between the primary motor (M1) and supplementary motor areas (SMA) were investigated. Unilateral (UNIright and UNIleft) self-paced tapping of hand fingers were performed to activate M1 and SMA. The intrinsic couplings were analysed using statistical parametric mapping, dynamic causal modeling (DCM) and Bayesian model analysis. Brain activation observed for UNIright and UNIleft showed contralateral and ipsilateral involvement of M1 and SMA. Ten full connectivity models were constructed with right and left M1 and SMA as processing centres. DCM indicated that all subjects prefer M1 as the intrinsic input for UNIright and UNIleft as indicated by a large group Bayes factor (GBF). Positive evidence ratio (PER) that showed strong evidence of Model 3 and Model 6 against other models in at least 12 out of 16 subjects, supported GBF results. The GBF and PER results were later found to be consistent with that of BMS for group studies with high expected posterior probability and exceedance probability. It was concluded that during unilateral finger tapping, the contralateral M1 would act as the input centre which in turn triggered the propagation of signals to SMA in the same hemisphere and to M1 and SMA in the opposite hemisphere.
This paper introduces a method for modification of the formula of the fractal box counting dimension. The method is based on the utilization of the probability distribution formula in the fractal box count. The purpose of this method is to use it for the discrimination of oil spill areas from the surrounding features e.g. sea surface and look-alikes in RADARSAT-1 SAR data. The result showed that the new formula of the fractal box counting dimension was able to discriminate between oil spills and look-alike areas. The low wind area had the highest fractal dimension peak of 2.9, as compared to the oil slick and the surrounding rough sea. The maximum error standard deviation of the low wind area was 0.68 which performed with a 2.9 fractal dimension value.