Readymade garments (RMG) industry of Bangladesh are lesser revealed to sustainable outlines that originating avoidance related with standard health and safety provisions, labor rights, women safety, child labor, pollution, waste disposal and ground water depletion. Recently there are also several safety hazards by way of fire incidents and building collapses which caused death and injury of thousand or garment workers at Bangladesh. Actually a suitable sustainable development scheme for this industry includes the insights of proper employee involvement based upon what is known (knowledge) and done (behavior). So the study aims to investigate the relationship between knowledge and behavior which reflects the complication between what is in fact known and what is done in case of sustainable issues. The study has used both questionnaire survey and interview procedures on 10 BGMEA registered factories of Chittagong to recognize the connection between knowledge and behavior. The target populace of the study has been limited only to the white collar employees. However, the study identified that employee knowledge and behavior of sustainable development contains a moderate, positive relationship (r=.315, n=150, p
Zingiberaceae is one of the largest plant families consisting of rhizomes that are commonly used as spice in soups and curries as well as alternative medications in folklore medicine. Zingiber officinale or commonly known as ginger is extensively employed in Asian, Ayurvedic, Chinese, and Arabian folklore medicine for the treatment of pain, inflammation and various spasm-associated gastric ailments. The past few decades saw rapid advancements in the extraction process of ginger bioactive constituents and validation of their corresponding pharmacodynamic and pharmacotherapeutic activities, and biological properties in vivo and in vitro. Results reported from several biological studies on ginger showed that extracts and compounds from this tuberous rhizome exhibit antiemetic, anticancer, antipyretic, antispasmogenic and antimicrobial activities. This article reviews the effect of Zingiber officinale and its bioactive constituents on isolated organ preparations from several species of animals in view of its potential use as an alternative treatment for muscle spasms and common gastric ailments.
Ficus carica L. or fig is the oldest fruit tree that being cultivated by man. Grouped under genus Ficus, this species is grown widely in Mediterranean region and now being cultivated in an area with temperate or sub-temperate climate. Fig planting in Malaysia is still new, which was brought by a man as a hobby at first. Fig is a unique fruit tree as some variety can produce fruits without pollination. Contain lots of carbohydrates, essential amino acids, vitamins and minerals such potassium, fibre, calcium, iron compared to other fruits, fig have become an important source of diet to people especially in Mediterranean region since ancient time.
This review paper discussed about publications related to micropropagation of bamboo species. In recent years, the application of tissue culture technique like in vitro micropropagation has been used to meet the demands for bamboo planting materials. In the past 30 years, protocols for micropropagation of various bamboo species have been established by researchers from all over the world. The controlling factors for cultures such as the explants, culture medium, carbon sources, combination and concentration of plant growth regulators and other additional additives are varied. The controlling factors are crucial in developing successful regeneration protocols for various bamboo species. This paper attempts to review and summarize the available and up-to-date information regarding in vitro micropropagation of bamboos.
Small and medium scale enterprises (SMEs) act as a promoter of economic development of the developed and under developed nations. Developing countries like Nigeria that, require sustainable economic growth and development must pay attention to the SMEs sectors in order to reduce unemployment, poverty and improve the standard leaving of its society. Unfortunately, in Nigeria, SMEs have underperformed despite that, 90% of the Nigerian businesses are small scales but their contribution to the Nigerian GDP is below 10%. The main reason for this low contribution of SMEs to Nigerian GDP could be attribute to poor funding, lack of management expertise and lack of access to modern technology among others, with proper finance the SMEs can acquire modern technology and employed qualified staff. Thus, this paper focuses on crowdfunding as financial option for Nigerian SMEs. However, the paper is a conceptual framework.
Stingless bee is a diverse group of highly eusocial bees (meliponines) comprising the Meliponini subfamily of the Apidae family. Throughout the tropics, various kinds of stingless bee have been reared by beekeepers for their products (honey, propolis and bee bread) and pollination services for fruits and vegetables. This meliponiculture in logs or hives is considered safe due to the bee’s inability to sting, with the latter being more preferable for monitoring and managing the colonies and harvesting the products. The source of stingless bee colonies is depending on efficient hunting of feral colonies, which might affect the ecosystem. Following to the growing trend of bee rearing in Malaysia, mainly due to the smart branding strategy of the government through research institutes and universities, e.g. Malaysian Agricultural Research and Development Institute (MARDI), Universiti Malaysia Terengganu and Universiti Sains Malaysia, it is crucial to increase the number of honey-producing hives by colony splitting. The basis of colony splitting includes provision oviposition (POP), swarming and antennation. Colony splitting is necessary due to deforestation, to expand income generation and for entomological study purposes. A more advanced approach in colony splitting is to prepare and rear the virgin queen bee in vitro, resulting in more queens per one single colony. With the advancement in stingless bee rearing techniques, people may apply the colony splitting strategy to maximise stingless bee products and enhance crop production.
This study assessed the feasibility of a syntactic analysis of newspaper editorials and to test out Morenberg’s (2010) syntactic theory. The purposes of this study hence, were to develop appropriate research questions and to determine whether Morenberg’s (2010) theory could be employed for the syntactic analysis of editorials. By adopting this theory, one editorial from The Star (2018), Malaysia and two editorials from The Sun (2018a, 2018b), UK were analysed, with the intention of investigating the concept of syntax to highlight the styles and constructions in professional writing. Sentences obtained from these three editorials were broken down via tree diagramming to answer the first research question - what are the syntactic patterns used in editorials in newspapers? The tree diagrams of all sentences were then examined to answer the second research question - are there syntactic differences in editorials? The study found the basic patterns of the sentences of all editorials used mostly transitive verbs, with the inclusion of many VBE verbs and very few intransitive and two-place transitive Vc verbs. Optional elements in the syntactic patterns, however, varied according to their different orders in sentence builds. Tree diagramming of the sentences revealed few noticeable differences in terms of sentence mood, structural parallelism, employment of wh-clause as well as subject ellipsis.
Awareness of recommendations for fruit and vegetable consumption has increased substantially over the last 20 years. In addition, fruits and vegetables such as pumpkin (Cucurbita moschata Duchesne) are good sources of many important nutrients, including potassium, vitamin C, folate, fibre, and numerous phytochemicals. Malaysia produces pumpkinits own, with considerably large areas of production comparable to its high global demand. However, in reality, there is a limitation in the commercial production as the local pumpkinis very much dependent on the market demand as the utilization has been limited to the consumption of fresh product. Thus, the objective of the study first initiative to provide the information about the pumpkinand second to investigatesthe opportunities on commercialized local pumpkinin Malaysia as by products despite various nutritious it is also listed as prophetic foods. The scientific research that covered a broad range of in vitro to in vivo studies on the by-products potentials of these fruits is also discussed in detail.The current review is an update for researchers to have a better understanding of the pumpkin, which simultaneously can provide awareness to enhance their commercial value and promote their utilization.Malaysia have potential to growth pumpkin instead of continuously importing. The daily consumption of pumpkins may provide various health benefits to human. Future investigation is needed to explore the potential of pumpkin as by products in order to increase its competitiveness and self-sufficiency.
Malaysia has taken initiative in enforcing the Solid Waste Management and Public Cleansing Act 2007 (Act 672) since 2011 to ensure the uniformity of law relating to the solid waste management and public cleansing. Despite the alarming issues on the increasing of solid waste generation, Malaysian government has made solid waste separation at source as mandatory starting 1st September 2015 at eight states. Solid waste separation at source has been seen as the best practice of solid waste minimization where it eliminates and reduces the amount of solid waste produced by the society. The government has taken seriously in solid waste separation at source as the lifespan of disposal site has been decreased and limited space for the new disposal site due to the increasing cost of solid waste management. Hence, to overcome the increasing of solid waste generation, an integrated solid waste minimization through recycling should be implemented as it is involved in minimizing resource and offers the best outcome for the environment. Thus, this paper discussed the overview of solid waste minimization in Malaysia and the stakeholder’s role and their obstacles in solid waste minimization to attract the public participate in reducing the solid waste generation as an efficient solid waste management. A proper solid waste management ensures a sustainable development of Malaysia in terms of health, socio-economy and environment respectively towards Malaysian Vision of 2020.
The new millennium witnessed increasing attention to the field of robotics, especially the development of humanoid bipedal robot. Attention is noticed from the increasing number of publications as a result of a multitude of humanoid projects for commercial and academic goals. This paper briefly visits the recent activities in this field, highlighting the importance and motivation behind adopting bipedal humanoid projects, particularly underlining biologically inspired design concept, bipedal locomotion and communication. Ultimately, emphasising on power-efficient design. The problem of endurance and effective duty cycle were presented. Finally, potential future application for the humanoid robot was briefly listed.
Structural buildings in seismic prone area, the required energy dissipation of strong column-weak beam especially for reinforced concrete frame structures is achievably through adequate beam-column joint strengthening connection in order to have high seismic performance. Literature investigation shows several approaches and techniques for modelling the weak joint for a typical frame structure. This paper extensively reviews those techniques, methods, concepts and their performance in improving the shear capacity for a deficient reinforced concrete beam-column joints in withstanding seismic loads. The beam-column joints performance responses showed positive. However, the need for an improved connection that will offer high ductility capacity and energy dissipation ability for post-tensioned reinforced concrete beam-column joints with continuing bottom reinforcement is highly feasible with the use of the Direct Displacement Based design philosophy. This will be of great interest for the future development of highly efficient joint system for frame structure capable of resisting significant seismic load.