Displaying publications 81 - 100 of 618 in total

Abstract:
Sort:
  1. Fulltext Simulation for supporting scale-up of a fluidized bed reactor for advanced water oxidation
    Tisa F, Raman AA, Daud WM
    ScientificWorldJournal, 2014;2014:348974.
    PMID: 25309949 DOI: 10.1155/2014/348974
    Simulation of fluidized bed reactor (FBR) was accomplished for treating wastewater using Fenton reaction, which is an advanced oxidation process (AOP). The simulation was performed to determine characteristics of FBR performance, concentration profile of the contaminants, and various prominent hydrodynamic properties (e.g., Reynolds number, velocity, and pressure) in the reactor. Simulation was implemented for 2.8 L working volume using hydrodynamic correlations, continuous equation, and simplified kinetic information for phenols degradation as a model. The simulation shows that, by using Fe(3+) and Fe(2+) mixtures as catalyst, TOC degradation up to 45% was achieved for contaminant range of 40-90 mg/L within 60 min. The concentration profiles and hydrodynamic characteristics were also generated. A subsequent scale-up study was also conducted using similitude method. The analysis shows that up to 10 L working volume, the models developed are applicable. The study proves that, using appropriate modeling and simulation, data can be predicted for designing and operating FBR for wastewater treatment.
  2. Fulltext Short-Term Effects of Strengthening Exercises of the Lower Limb Rehabilitation Protocol on Pain, Stiffness, Physical Function, and Body Mass Index among Knee Osteoarthritis Participants Who Were Overweight or Obese: A Clinical Trial
    Rafiq MT, Hamid MSA, Hafiz E
    ScientificWorldJournal, 2021;2021:6672274.
    PMID: 34975349 DOI: 10.1155/2021/6672274
    BACKGROUND: Osteoarthritis (OA) of the knee is defined as a progressive disease of the synovial joints and is characterized by wear and tear of the cartilage and underlying bone. This study aimed to determine the short-term effects of the lower limb rehabilitation protocol (LLRP) on pain, stiffness, physical function, and body mass index (BMI) among knee OA participants who were overweight or obese. Methodology. A single-blinded randomized controlled trial of one-month duration was conducted at Rehmatul-Lil-Alameen Postgraduate Institute, Lahore, Pakistan. Fifty overweight or obese participants with knee OA were randomly divided into two groups by a computer-generated number. Participants in the rehabilitation protocol group (RPG) were provided with leaflets explaining the strengthening exercises of the LLRP and instruction of daily care (IDC), while the participants in the control group (CG) were provided with leaflets explaining the IDC only for a duration of four weeks. The primary outcome measures were the Western Ontario and McMaster Universities Osteoarthritis Index (WOMAC) scores for pain, stiffness, and physical function. The secondary outcome measures were BMI, exercise adherence, and patients' satisfaction assessed by using the numeric rating scale ranging from 0 to 10. The paired-sample t-test was used to analyze the differences within groups from baseline to posttest evaluations. The analysis of variance 2 × 2 factor was used to analyze the differences in BMI, knee pain, stiffness, and physical function between the groups.

    RESULTS: Participants in the RPG and CG reported a statistically significant reduction in knee pain and stiffness (p ≤ 0.05) within the group. The reduction in the scores of knee pain was higher in participants in the RPG than that in participants in the CG (p=0.001). Additionally, participants in the RPG reported greater satisfaction (p=0.001) and higher self-reported exercise adherence (p=0.010) and coordinator-reported exercise adherence (p=0.046) than the participants in the CG.

    CONCLUSION: Short-term effects of the LLRP appear to reduce knee pain and stiffness only, but not physical function and BMI.

  3. Fulltext Seropositivity of dengue antibodies during pregnancy
    Mohamed Ismail NA, Wan Abd Rahim WE, Salleh SA, Neoh HM, Jamal R, Jamil MA
    ScientificWorldJournal, 2014;2014:436975.
    PMID: 25587564 DOI: 10.1155/2014/436975
    Malaysia a dengue endemic country with dengue infections in pregnancy on the rise. The present study was aimed at determining dengue seroprevalence (IgG or IgM) during pregnancy and its neonatal transmission in dengue seropositive women.
  4. Fulltext Semisolid metal processing techniques for nondendritic feedstock production
    Mohammed MN, Omar MZ, Salleh MS, Alhawari KS, Kapranos P
    ScientificWorldJournal, 2013;2013:752175.
    PMID: 24194689 DOI: 10.1155/2013/752175
    Semisolid metal (SSM) processing or thixoforming is widely known as a technology that involves the formation of metal alloys between solidus and liquidus temperatures. For the procedure to operate successfully, the microstructure of the starting material must consist of solid near-globular grains surrounded by a liquid matrix and a wide solidus-to-liquidus transition area. Currently, this process is industrially successful, generating a variety of products with high quality parts in various industrial sectors. Throughout the years since its inception, a number of technologies to produce the appropriate globular microstructure have been developed and applied worldwide. The main aim of this paper is to classify the presently available SSM technologies and present a comprehensive review of the potential mechanisms that lead to microstructural alterations during the preparation of feedstock materials for SSM processing.
  5. Fulltext Seismic performance of RC beam-column connections with continuous rectangular spiral transverse reinforcements for low ductility classes
    Azimi M, Bin Adnan A, Sam AR, Tahir MM, Faridmehr I, Hodjati R
    ScientificWorldJournal, 2014;2014:802605.
    PMID: 25309957 DOI: 10.1155/2014/802605
    The seismic performance of RC columns could be significantly improved by continuous spiral reinforcement as a result of its adequate ductility and energy dissipation capacity. Due to post-earthquake brittle failure observations in beam-column connections, the seismic behaviour of such connections could greatly be improved by simultaneous application of this method in both beams and columns. In this study, a new proposed detail for beam to column connection introduced as "twisted opposing rectangular spiral" was experimentally and numerically investigated and its seismic performance was compared against normal rectangular spiral and conventional shear reinforcement systems. In this study, three full scale beam to column connections were first designed in conformance with Eurocode (EC2-04) for low ductility class connections and then tested by quasistatic cyclic loading recommended by ACI Building Code (ACI 318-02). Next, the experimental results were validated by numerical methods. Finally, the results revealed that the new proposed connection could improve the ultimate lateral resistance, ductility, and energy dissipation capacity.
  6. Fulltext Seed yield of mungbean (Vigna radiata (L.) Wilczek) in relation to growth and developmental aspects
    Mondal MM, Puteh AB, Malek MA, Ismail MR, Rafii MY, Latif MA
    ScientificWorldJournal, 2012;2012:425168.
    PMID: 22919319 DOI: 10.1100/2012/425168
    Growth parameters such as leaf area (LA), total dry mass (TDM) production, crop growth rate (CGR), relative growth rate (RGR), and net assimilation rate (NAR) were compared in six varieties of mungbean under subtropical condition (24°8' N 90°0' E) to identify limiting growth characters for the efficient application of physiology breeding for higher yields. Results revealed that a relatively smaller portion of TDM was produced before flower initiation and the bulk of it after anthesis. The maximum CGR was observed during pod filling stage in all the varieties due to maximum leaf area (LA) development at this stage. Two plant characters such as LA and CGR contributed to the higher TDM production. Results indicated that high yielding mungbean varieties should possess larger LA, higher TDM production ability, superior CGR at all growth stages, and high relative growth rate and net assimilation rate at vegetative stage which would result in superior yield components.
  7. Fulltext Seasonal abundance and suppression of fruit-piercing moth Eudocima phalonia (L.) in a citrus orchard in Sarawak
    Leong SC, Kueh RJ
    ScientificWorldJournal, 2011;11:2330-8.
    PMID: 22203789 DOI: 10.1100/2011/753484
    Seasonal population of the fruit-piercing moths Eudocima spp. was monitored throughout the citrus growing seasons in a citrus orchard and in site adjacent to secondary forest from July 2007 to June 2009. The moth was detected practically throughout the year with activity lowest during the wet months (September-February) when fruits are still available and while highest during the dry months (May-June) which also coincided with the main fruiting season. The effects of an nC24 horticultural mineral oil (HMO) on the citrus fruit damage caused by fruit-piecing moths was also determined. The percent fruit damage was significantly lowest (P≤0.05) in HMO-treated plots (8.4), followed by Dimethoate-treated plots (11.6) and untreated plots (22.5). However, there was no significant difference between HMO and Dimethoate treated plots indicating HMO is effective in reducing percent fruit damage.
  8. Fulltext Screening of purslane (Portulaca oleracea L.) accessions for high salt tolerance
    Alam MA, Juraimi AS, Rafii MY, Hamid AA, Aslani F
    ScientificWorldJournal, 2014;2014:627916.
    PMID: 25003141 DOI: 10.1155/2014/627916
    Purslane (Portulaca oleracea L.) is an herbaceous leafy vegetable crop, comparatively more salt-tolerant than any other vegetables with high antioxidants, minerals, and vitamins. Salt-tolerant crop variety development is of importance due to inadequate cultivable land and escalating salinity together with population pressure. In this view a total of 25 purslane accessions were initially selected from 45 collected purslane accessions based on better growth performance and subjected to 5 different salinity levels, that is, 0.0, 10.0, 20.0, 30.0, and 40.0 dS m(-1) NaCl. Plant height, number of leaves, number of flowers, and dry matter contents in salt treated purslane accessions were significantly reduced (P ≤ 0.05) and the enormity of reduction increased with increasing salinity stress. Based on dry matter yield reduction, among all 25 purslane accessions 2 accessions were graded as tolerant (Ac7 and Ac9), 6 accessions were moderately tolerant (Ac3, Ac5, Ac6, Ac10, Ac11, and Ac12), 5 accessions were moderately susceptible (Ac1, Ac2, Ac4, Ac8, and Ac13), and the remaining 12 accessions were susceptible to salinity stress and discarded from further study. The selected 13 purslane accessions could assist in the identification of superior genes for salt tolerance in purslane for improving its productivity and sustainable agricultural production.
  9. Fulltext Salinity tolerance turfgrass: history and prospects
    Uddin MK, Juraimi AS
    ScientificWorldJournal, 2013;2013:409413.
    PMID: 24222734 DOI: 10.1155/2013/409413
    Land and water resources are becoming scarce and are insufficient to sustain the burgeoning population. Salinity is one of the most important abiotic stresses affecting agricultural productions across the world. Cultivation of salt-tolerant turfgrass species may be promising option under such conditions where poor quality water can also be used for these crops. Coastal lands in developing countries can be used to grow such crops, and seawater can be used for irrigation of purposes. These plants can be grown using land and water unsuitable for conventional crops and can provide food, fuel, fodder, fibber, resin, essential oils, and pharmaceutical products and can be used for landscape reintegration. There are a number of potential turfgrass species that may be appropriate at various salinity levels of seawater. The goal of this review is to create greater awareness of salt-tolerant turfgrasses, their current and potential uses, and their potential use in developing countries. The future for irrigating turf may rely on the use of moderate- to high-salinity water and, in order to ensure that the turf system is sustainable, will rely on the use of salt-tolerant grasses and an improved knowledge of the effects of salinity on turfgrasses.
  10. Fulltext SEM-PLS analysis of inhibiting factors of cost performance for large construction projects in Malaysia: perspective of clients and consultants
    Memon AH, Rahman IA
    ScientificWorldJournal, 2014;2014:165158.
    PMID: 24693227 DOI: 10.1155/2014/165158
    This study uncovered inhibiting factors to cost performance in large construction projects of Malaysia. Questionnaire survey was conducted among clients and consultants involved in large construction projects. In the questionnaire, a total of 35 inhibiting factors grouped in 7 categories were presented to the respondents for rating significant level of each factor. A total of 300 questionnaire forms were distributed. Only 144 completed sets were received and analysed using advanced multivariate statistical software of Structural Equation Modelling (SmartPLS v2). The analysis involved three iteration processes where several of the factors were deleted in order to make the model acceptable. The result of the analysis found that R(2) value of the model is 0.422 which indicates that the developed model has a substantial impact on cost performance. Based on the final form of the model, contractor's site management category is the most prominent in exhibiting effect on cost performance of large construction projects. This finding is validated using advanced techniques of power analysis. This vigorous multivariate analysis has explicitly found the significant category which consists of several causative factors to poor cost performance in large construction projects. This will benefit all parties involved in construction projects for controlling cost overrun.
  11. Fulltext Runoff potentiality of a watershed through SCS and functional data analysis technique
    Adham MI, Shirazi SM, Othman F, Rahman S, Yusop Z, Ismail Z
    ScientificWorldJournal, 2014;2014:379763.
    PMID: 25152911 DOI: 10.1155/2014/379763
    Runoff potentiality of a watershed was assessed based on identifying curve number (CN), soil conservation service (SCS), and functional data analysis (FDA) techniques. Daily discrete rainfall data were collected from weather stations in the study area and analyzed through lowess method for smoothing curve. As runoff data represents a periodic pattern in each watershed, Fourier series was introduced to fit the smooth curve of eight watersheds. Seven terms of Fourier series were introduced for the watersheds 5 and 8, while 8 terms of Fourier series were used for the rest of the watersheds for the best fit of data. Bootstrapping smooth curve analysis reveals that watersheds 1, 2, 3, 6, 7, and 8 are with monthly mean runoffs of 29, 24, 22, 23, 26, and 27 mm, respectively, and these watersheds would likely contribute to surface runoff in the study area. The purpose of this study was to transform runoff data into a smooth curve for representing the surface runoff pattern and mean runoff of each watershed through statistical method. This study provides information of runoff potentiality of each watershed and also provides input data for hydrological modeling.
  12. Fulltext Role of rutin on nitric oxide synthesis in human umbilical vein endothelial cells
    Ugusman A, Zakaria Z, Chua KH, Nordin NA, Abdullah Mahdy Z
    ScientificWorldJournal, 2014;2014:169370.
    PMID: 25093198 DOI: 10.1155/2014/169370
    Nitric oxide (NO), produced by endothelial nitric oxide synthase (eNOS), is a major antiatherogenic factor in the blood vessel. Oxidative stress plays an important role in the pathogenesis of various cardiovascular diseases, including atherosclerosis. Decreased availability of endothelial NO promotes the progression of endothelial dysfunction and atherosclerosis. Rutin is a flavonoid with multiple cardiovascular protective effects. This study aimed to investigate the effects of rutin on eNOS and NO production in cultured human umbilical vein endothelial cells (HUVEC). HUVEC were divided into four groups: control; oxidative stress induction with 180 μM H₂O₂; treatment with 300 μM rutin; and concomitant induction with rutin and H₂O₂ for 24 hours. HUVEC treated with rutin produced higher amount of NO compared to control (P < 0.01). In the oxidative stress-induced HUVEC, rutin successfully induced cells' NO production (P < 0.01). Rutin promoted NO production in HUVEC by inducing eNOS gene expression (P < 0.05), eNOS protein synthesis (P < 0.01), and eNOS activity (P < 0.05). Treatment with rutin also led to increased gene and protein expression of basic fibroblast growth factor (bFGF) in HUVEC. Therefore, upregulation of eNOS expression by rutin may be mediated by bFGF. The results showed that rutin may improve endothelial function by augmenting NO production in human endothelial cells.
  13. Fulltext Role of accumulated calcium in alleviating aluminum injury in wheat plants
    Hossain MA, Ashrafuzzaman M, Hossain AK, Ismail MR, Koyama H
    ScientificWorldJournal, 2014;2014:457187.
    PMID: 24701169 DOI: 10.1155/2014/457187
    Aluminum (Al) sensitive wheat cultivar kalyansona was grown for 14 d in a range of Ca solution (125, 625, and 2500 μM) plus other nutrients without Al. At 14 d after Ca treatment, half of these plants were harvested (H1), and the rest of the plants were exposed to 100 μM Al for additional 6 d and harvested (H2). Severe Al injury was found only in the plants with the lowest supply of Ca before Al treatment. Aluminum concentration in the apoplastic fluid was very high at 125 μM Ca probably because the plasma membrane of some of the cells was destroyed due to the attack of 100 μM Al. Aluminum content in roots decreased with increasing supply of Ca before Al treatment. Calcium content decreased drastically at harvest (H2) in the plants with 100 μM Al. Under Al stress conditions, the plant responded to Al in different ways due to not only the different Ca supply but also the variation of Ca content in the plant tissues. Actually, the plants having the largest Ca content in the roots before Al treatment can receive less Al injury during Al treatment. To substantiate this idea, a companion study was conducted to investigate the effects of 2500 μM Ca supply during, before, and after 100 μM Al treatment on root growth. The results indicated clearly that exogenous Ca supply before Al treatment is able to alleviate Al injury but less effective than Ca supply during Al treatment.
  14. Fulltext Role of EEG as biomarker in the early detection and classification of dementia
    Al-Qazzaz NK, Ali SH, Ahmad SA, Chellappan K, Islam MS, Escudero J
    ScientificWorldJournal, 2014;2014:906038.
    PMID: 25093211 DOI: 10.1155/2014/906038
    The early detection and classification of dementia are important clinical support tasks for medical practitioners in customizing patient treatment programs to better manage the development and progression of these diseases. Efforts are being made to diagnose these neurodegenerative disorders in the early stages. Indeed, early diagnosis helps patients to obtain the maximum treatment benefit before significant mental decline occurs. The use of electroencephalogram as a tool for the detection of changes in brain activities and clinical diagnosis is becoming increasingly popular for its capabilities in quantifying changes in brain degeneration in dementia. This paper reviews the role of electroencephalogram as a biomarker based on signal processing to detect dementia in early stages and classify its severity. The review starts with a discussion of dementia types and cognitive spectrum followed by the presentation of the effective preprocessing denoising to eliminate possible artifacts. It continues with a description of feature extraction by using linear and nonlinear techniques, and it ends with a brief explanation of vast variety of separation techniques to classify EEG signals. This paper also provides an idea from the most popular studies that may help in diagnosing dementia in early stages and classifying through electroencephalogram signal processing and analysis.
  15. Fulltext Robust fuzzy logic stabilization with disturbance elimination
    Danapalasingam KA
    ScientificWorldJournal, 2014;2014:171597.
    PMID: 25177713 DOI: 10.1155/2014/171597
    A robust fuzzy logic controller is proposed for stabilization and disturbance rejection in nonlinear control systems of a particular type. The dynamic feedback controller is designed as a combination of a control law that compensates for nonlinear terms in a control system and a dynamic fuzzy logic controller that addresses unknown model uncertainties and an unmeasured disturbance. Since it is challenging to derive a highly accurate mathematical model, the proposed controller requires only nominal functions of a control system. In this paper, a mathematical derivation is carried out to prove that the controller is able to achieve asymptotic stability by processing state measurements. Robustness here refers to the ability of the controller to asymptotically steer the state vector towards the origin in the presence of model uncertainties and a disturbance input. Simulation results of the robust fuzzy logic controller application in a magnetic levitation system demonstrate the feasibility of the control design.
  16. Fulltext Risk Assessment of Fishing Trawl Activities to Subsea Pipelines of Sabah and Labuan Waters
    Ahmad Fuad AF, Said MH, Samo K, Rahman MAA, Mohd MH, Zainol I
    ScientificWorldJournal, 2020;2020:6957171.
    PMID: 33414690 DOI: 10.1155/2020/6957171
    Introduction. Trawling is a method of catching fish in a large volume where fish nets are pulled through water using one or two boats. Bottom trawling is where the nets are pulled over on the seabed. The gear of the bottom trawling would impact the exposed subsea pipeline, on the seabed. Subsea pipelines transport crude oil and gas from the offshore platform to shore facility. This study assesses the risk of fish trawling activities to the subsea pipelines at Sabah and Labuan offshore. The specification of trawl equipment used by local trawlers in Sabah was determined by the on-site survey. The frequency of a fish trawler crossing over the pipelines was calculated based interview on operation and site survey. The calculation of the pull-over load of the otter board was calculated using the DNVGL algorithm. The severity and frequency index of the risk matrix was developed based on literature review. Results showed that the pull-over load of the otter board would not damage the pipelines. The risk posed by the fish trawler activity to the pipelines is low and moderate.
  17. Fulltext Review on the Risk Assessment of Heavy Metals in Malaysian Clams
    Hossen MF, Hamdan S, Rahman MR
    ScientificWorldJournal, 2015;2015:905497.
    PMID: 26060840 DOI: 10.1155/2015/905497
    The current review discusses the levels of six heavy metals in different clam species from 34 sites of Malaysian coasts. The concentrations (µg/g dry weight) of these heavy metals ranged around 0.18-8.51, 0.13-17.20, 2.17-7.80, 0.84-36.00, 24.13-368.00, and 177.82-1912.00 for Cd, Pb, Ni, Cu, Zn, and Fe, respectively. It was observed that the concentrations of metals slightly depend on different clam species but mostly depend on site locations. According to Malaysian Food Regulation (1985), about 30% and more than 50% sites are safe from Cd and Pb contamination, respectively, and also the clam species from the other populations studied were safe for consumption.
  18. Fulltext Review on cold-formed steel connections
    Lee YH, Tan CS, Mohammad S, Tahir MM, Shek PN
    ScientificWorldJournal, 2014;2014:951216.
    PMID: 24688448 DOI: 10.1155/2014/951216
    The concept of cold-formed light steel framing construction has been widespread after understanding its structural characteristics with massive research works over the years. Connection serves as one of the important elements for light steel framing in order to achieve its structural stability. Compared to hot-rolled steel sections, cold-formed steel connections perform dissimilarity due to the thin-walled behaviour. This paper aims to review current researches on cold-formed steel connections, particularly for screw connections, storage rack connections, welded connections, and bolted connections. The performance of these connections in the design of cold-formed steel structures is discussed.
  19. Fulltext Review of the socket design and interface pressure measurement for transtibial prosthesis
    Pirouzi G, Abu Osman NA, Eshraghi A, Ali S, Gholizadeh H, Wan Abas WA
    ScientificWorldJournal, 2014;2014:849073.
    PMID: 25197716 DOI: 10.1155/2014/849073
    Socket is an important part of every prosthetic limb as an interface between the residual limb and prosthetic components. Biomechanics of socket-residual limb interface, especially the pressure and force distribution, have effect on patient satisfaction and function. This paper aimed to review and evaluate studies conducted in the last decades on the design of socket, in-socket interface pressure measurement, and socket biomechanics. Literature was searched to find related keywords with transtibial amputation, socket-residual limb interface, socket measurement, socket design, modeling, computational modeling, and suspension system. In accordance with the selection criteria, 19 articles were selected for further analysis. It was revealed that pressure and stress have been studied in the last decaeds, but quantitative evaluations remain inapplicable in clinical settings. This study also illustrates prevailing systems, which may facilitate improvements in socket design for improved quality of life for individuals ambulating with transtibial prosthesis. It is hoped that the review will better facilitate the understanding and determine the clinical relevance of quantitative evaluations.
  20. Fulltext Review of development survey of phase change material models in building applications
    Akeiber HJ, Wahid MA, Hussen HM, Mohammad AT
    ScientificWorldJournal, 2014;2014:391690.
    PMID: 25313367 DOI: 10.1155/2014/391690
    The application of phase change materials (PCMs) in green buildings has been increasing rapidly. PCM applications in green buildings include several development models. This paper briefly surveys the recent research and development activities of PCM technology in building applications. Firstly, a basic description of phase change and their principles is provided; the classification and applications of PCMs are also included. Secondly, PCM models in buildings are reviewed and discussed according to the wall, roof, floor, and cooling systems. Finally, conclusions are presented based on the collected data.
Related Terms
Filters
Contact Us

Please provide feedback to Administrator (afdal@afpm.org.my)

External Links