MyMedR

Displaying publications 81 - 88 of 88 in total

Abstract:

Sort:

Effects of two ergonomic improvements in brazing coils of air-handler units

Loo HS, Yeow PH

Appl Ergon, 2015 Nov;51:383-91.
PMID: 26154237 DOI: 10.1016/j.apergo.2015.06.007

The research aims to address the physically loading task and quality and productivity problems in the brazing of coils of air-handler units. Eight operators participated in two intervention studies conducted in a factory in Malaysia to compare the status quo brazing with (1) the use of a new twin-brazing torch that replaced the single-brazing gun and (2) brazing in a sitting position. The outcome measures are related to quality, productivity, monetary costs, body postures and symptoms. After baseline, Interventions I and II were applied for 3 months respectively. The results show a 58.9% quality improvement, 140% productivity increase and 113 times ROI. There was also a reduction in poor work postures e.g. in the raising of the arms and shoulders; bending, twisting and extending of the neck; and bending of left and right wrists, and the back. This research can be replicated in other factories that share similar processes.

Matched MeSH terms: Efficiency
Analysis of the spatial characteristics and influencing factors of agricultural eco-efficiency: evidence from Anhui Province, China, during the period 2011-2018

Wu Y, Rahman RA, Yu Q

Environ Monit Assess, 2022 Feb 08;194(3):154.
PMID: 35132444 DOI: 10.1007/s10661-022-09817-9

Sustainable agriculture is important for preserving environmental health and simultaneously gaining economic profits while maintaining social and economic equity. One way to evaluate sustainable agriculture is by studying agricultural eco-efficiency (AEE). Hence, this study constructed a data-driven method to evaluate and optimize AEE with the aim of providing a basis for improving the sustainable development of regional agriculture. Sixteen cities in Anhui Province, China, were considered in the study, and the variables used were agricultural resource inputs, environmental pollution, and agricultural economic development. Agricultural non-point source pollution (NPSP) emissions were considered the undesired output to build an AEE evaluation index system. Furthermore, a data envelopment analysis (DEA) model was established to analyse AEE from the static and dynamic perspectives. The spatial development and the temporal and spatial characteristics of AEE were also analysed. In addition, we applied a random effect (RE) panel Tobit model to quantitatively analyse the influencing factors of AEE from the input perspective and then proposed reasonable suggestions for improving the sustainable development of regional agriculture. Our findings show that the overall agricultural development in the 16 cities in Anhui Province has been continuously improving, even though there is an agglomeration of spatial development in some regions. In conclusion, this study provides suggestions and references for policy makers and agricultural practitioners regarding how to improve regional AEE and promote the sustainable development of the regional agricultural economy.

Matched MeSH terms: Efficiency
Waste in health information systems: a systematic review

Awang Kalong N, Yusof M

Int J Health Care Qual Assur, 2017 May 08;30(4):341-357.
PMID: 28470137 DOI: 10.1108/IJHCQA-06-2016-0082

Purpose The purpose of this paper is to discuss a systematic review on waste identification related to health information systems (HIS) in Lean transformation. Design/methodology/approach A systematic review was conducted on 19 studies to evaluate Lean transformation and tools used to remove waste related to HIS in clinical settings. Findings Ten waste categories were identified, along with their relationships and applications of Lean tool types related to HIS. Different Lean tools were used at the early and final stages of Lean transformation; the tool selection depended on the waste characteristic. Nine studies reported a positive impact from Lean transformation in improving daily work processes. The selection of Lean tools should be made based on the timing, purpose and characteristics of waste to be removed. Research limitations/implications Overview of waste and its category within HIS and its analysis from socio-technical perspectives enabled the identification of its root cause in a holistic and rigorous manner. Practical implications Understanding waste types, their root cause and review of Lean tools could subsequently lead to the identification of mitigation approach to prevent future error occurrence. Originality/value Specific waste models for HIS settings are yet to be developed. Hence, the identification of the waste categories could guide future implementation of Lean transformations in HIS settings.

Matched MeSH terms: Efficiency, Organizational*
Fulltext The use of dgDocSPACE in personal file management: a case study at Majlis Perbandaran Port Dickson (MPPD)

Rafidah Kamarudin, Azura Abd Jamil @ Kamarudzzaman, Albakri Mohammad, Norlis Osman, Zaidatulhusna Mohd Isnani

Jurnal Inovasi Malaysia, 2020;3(2):26-41.
MyJurnal

Hari Bertemu Pelanggan (HBP) is an essential event of the Port Dickson Municipal Council (MPPD) which is held twice a year for staff to review their Personal Files. The problem faced by the staff at the Human Resource Department (JPSM) MPPD is to handle staff Personal Files from the file room to the HBP location during the event. Risks such as loss and damage of Personal Files and the high cost in transferring staff Personal Files lead to the development of innovation known as dgDocSPACE. The implementation of the innovation has successfully reduced the operating cost, increased productivity, shortened time for reviewing Personal Files and increased customer satisfaction.

Matched MeSH terms: Efficiency
Fulltext Biomedical and health sciences publication productivity from Malaysia

Zainal H, Zainab AN

Health Info Libr J, 2011 Sep;28(3):216-25.
PMID: 21831221 DOI: 10.1111/j.1471-1842.2011.00943.x

BACKGROUND: The aim of this study was to examine Malaysian contributions in the field of biomedical and health sciences.
METHODS: In this study, 3697 publications affiliated to Malaysian addresses from the sci database between 1990 and 2005 were sampled. This study also explored publication productivity trends, authorship and collaboration pattern, core journals used, and citations obtained.
RESULTS: Main contributions were journal articles (73.3%). Most authors (63.7%) contributed only one article and 16.1% produced over 30-68 publications. Multi-authored works were the norm. The productive authors were named either first or second in publications. There were active collaborations with authors from Asia-Pacific countries (35%) and Europe (30%). The majority of publications were contributed by institutions of higher learning (87%). Core journals used follow quite close to Bradford's zonal ratios of 44:152:581. The active research areas were identified. About 71.3% of publications received citations especially those published from 1995 to 1999.
CONCLUSION: This study helped librarians identify active researchers, active research areas and journals relevant to biomedical and health sciences researchers and useful when producing reports to university management and planning medical collection policies and deciding on journal subscriptions and cancellations.

Matched MeSH terms: Efficiency*
Fulltext Knowledge management process, knowledge based innovation: Does academic researcher's productivity mediate during the pandemic of covid-19?

Rehman FU, Ismail H, Al Ghazali BM, Asad MM, Shahbaz MS, Zeb A

PLoS One, 2021;16(12):e0261573.
PMID: 34937055 DOI: 10.1371/journal.pone.0261573

Drucker's knowledge-worker productivity theory and knowledge-based view of the firm theory are widely employed in many disciplines but there is little application of these theories in knowledge-based innovation among academic researchers. Therefore, this study intends to evaluate the effects of the knowledge management process on knowledge-based innovation alongside with mediating role of Malaysian academic researchers' productivity during the Pandemic of COVID-19. Using a random sampling technique, data was collected from 382 academic researchers. Questionnaires were self-administered and data was analyzed via Smart PLS-SEM. Knowledge management process and knowledge workers' productivity have a positive and significant relationship with the knowledge-based innovation among academic researchers during the Pandemic of COVID-19. In addition, knowledge workers' productivity mediates the relationship between the knowledge management process (knowledge creation, knowledge acquisition, knowledge sharing, and knowledge utilization) and knowledge-based innovation during the Pandemic of COVID-19. Results have also directed knowledge sharing as the key factor in knowledge-based innovation and a stimulating task for management discipline around the world during the Pandemic of COVID-19. This study provides interesting insights on Malaysian academic researchers' productivity by evaluating the effects of knowledge creation, acquisition, sharing, and application on the knowledge-based innovation among academic researchers during the Pandemic of COVID-19. These useful insights would enable policymakers to develop more influential educational strategies. By assimilating the literature of defined variables, the main contribution of this study is the evaluation of knowledge creation, acquisition, sharing, and utilization into knowledge-based innovation alongside the mediating role of knowledge workers productivity in the higher education sector of Malaysia during the Pandemic of COVID-19.

Matched MeSH terms: Efficiency
Fulltext Economic Burden of the Inadequate Management of Allergic Rhinitis and Urticaria in Asian Countries Based on the GA²LEN Model

Kulthanan K, Chusakul S, Recto MT, Gabriel MT, Aw DCW, Prepageran N, et al.

Allergy Asthma Immunol Res, 2018 Jul;10(4):370-378.
PMID: 29949833 DOI: 10.4168/aair.2018.10.4.370

PURPOSE: Across Hong Kong, Malaysia, the Philippines, Singapore, Thailand and Vietnam, (referred to as Asia) approximately 30-53 million individuals of the 151 million employed suffer from allergic rhinitis (AR) and urticaria. It is estimated that approximately 90% of patients with these allergic conditions are insufficiently treated, impacting the socioeconomic burden in terms of absence from work and decreased productivity. This study aims to estimate the socioeconomic burden of allergies in Asia and the cost savings that their adequate management can provide. Due to the limited availability of regional data, this study focused AR and urticaria in selected countries.
METHODS: Published literature, information from statistical bureaus, clinician surveys and extrapolation of selected data from the European Union were used to determine the socioeconomic costs of AR and urticaria.
RESULTS: Many patients in Asia suffer from perennial allergies and experience symptoms of AR and urticaria for up to 298 days per year. An estimate of the indirect costs of patients insufficiently treated for AR and urticaria amounts to USD 105.4 billion a year, which equates to USD 1,137-2,195 per patient due to absenteeism and presenteeism. Adherence to guideline-approved treatment can lead to estimated savings of up to USD 104 billion.
CONCLUSIONS: The current study suggests that within Asia, the socioeconomic impact of AR and urticaria is similar to that seen in the European Union in spite of the lower wages in Asia. This is due to the mainly perennial allergens prevailing in Asia, whereas the sensitization patterns observed in the European Union are dominated by seasonal exposure to pollen. These results underline the need for governmental initiatives to increase public awareness on the prevention and treatment of these and other allergic diseases as well as greater research funding and large-scale studies to reduce their growing socioeconomic burden in coming years.

Matched MeSH terms: Efficiency
Health care reform and changes: the Malaysian experience

Merican MI, bin Yon R

Asia Pac J Public Health, 2002;14(1):17-22.
PMID: 12597513

Health care reform is an intentional, sustained and systematic process of structural change to one or more health subsystems to improve efficiency, effectiveness, patient choices and equity. Health care all over the world is continuously reforming with time. Health care reform has become an increasingly important agenda for policy change in both developed and developing countries including Malaysia. This paper provides an overview of the Malaysian health care system, its achievements, and issues and challenges leading to ongoing reform towards a more efficient and equitable health care system that possess a better quality of life for the population.

Matched MeSH terms: Efficiency, Organizational