The critical impact of sodium-doped molybdenum (MoNa) in shaping the MoSe2 interfacial layer, influencing the electrical properties of CIGSe/Mo heterostructures, and achieving optimal MoSe2 formation conditions, leading to improved hetero-contact quality. Notably, samples with a 600-nm-thick MoNa layer demonstrate the highest resistivity (73 μΩcm) and sheet resistance (0.45 Ω/square), highlighting the substantial impact of MoNa layer thickness on electrical conductivity. Controlled sodium diffusion through MoNa layers is essential for achieving desirable electrical characteristics, influencing Na diffusion rates, grain sizes, and overall morphology, as elucidated by EDX and FESEM analyses. Additionally, XRD results provide insights into the spontaneous peeling-off phenomenon, with the sample featuring a ~ 600-nm MoNa layer displaying the strongest diffraction peak and the largest crystal size, indicative of enhanced Mo to MoSe2 conversion facilitated by sodium presence. Raman spectra further confirm the presence of MoSe2, with its thickness correlating with MoNa layer thickness. The observed increase in resistance and decrease in conductivity with rising MoSe2 layer thickness underscore the critical importance of optimal MoSe2 formation for transitioning from Schottky to ohmic contact in CIGSe/Mo heterostructures. Ultimately, significant factors to the advancement of CIGSe thin-film solar cell production are discussed, providing nuanced insights into the interplay of MoNa and MoSe2, elucidating their collective impact on the electrical characteristics of CIGSe/Mo heterostructures.
Environmental sustainability is a key target to achieve sustainable development goals (SDGs). However, achieving these targets needs tools to pave the way for achieving SDGs and COP28 targets. Therefore, the primary objective of the present study is to examine the significance of clean energy, research and development spending, technological innovation, income, and human capital in achieving environmental sustainability in the USA from 1990 to 2022. The study employed time series econometric methods to estimate the empirical results. The study confirmed the long-run cointegrating relationship among CO2 emissions, human capital, income, R&D, technological innovation, and clean energy. The results are statistically significant in the short run except for R&D expenditures. In the long run, the study found that income and human capital contribute to further aggravating the environment via increasing CO2 emissions. However, R&D expenditures, technological innovation, and clean energy help to promote environmental sustainability by limiting carbon emissions. The study recommends investment in technological innovation, clean energy, and increasing R&D expenditures to achieve environmental sustainability in the USA.
Biodiesel serves as a viable alternative to traditional diesel due to its non-toxicity, biodegradability, and lower environmental footprint. Among the diverse edible and inedible feedstocks, waste frying oil emerges as a promising and affordable feedstock for biodiesel production. Commonly waste frying oils include those derived from palm, corn, sunflower, soybean, rapeseed, and canola. The primary challenge related to biodiesel production technologies is the high production cost, which poses a significant barrier to its widespread adoption. Thus, refining the production techniques is essential to enhance yield, reduce capital expenditure, and curtail raw material expenses. An examination of the research focusing on feedstock availability, production, hurdles, operational expenditures, and future potential is pivotal for identifying the most economically and technically viable solutions. This paper critically reviews such research by exploring feedstock availability, production techniques, challenges, and costs intrinsic to biodiesel synthesis. It also underscores the economic feasibility of biodiesel production, shedding light on the pivotal factors that influence profitability, especially when leveraging waste frying oils. Through an in-depth understanding of these considerations, optimal production and feedstock choices for biodiesel production can be identified. Addressing cost and production bottlenecks could potentially enhance the economic viability of waste frying oil-based biodiesel, thus fostering both environmental sustainability and more extensive adoption of biodiesel as an environmental-friendly fuel in the future.
This study measures the energy rebound effects of Chinese energy and coal power use in Chinese energy-intensive industries by using latent class stochastic frontier models like LMDI, and other various econometric estimation approach for coal-supplying regions in China ranging between 1992 and 2018. The findings reveals that China's coal sector's average capacity consumption is 0.81%, with a pattern of first increasing and then decreasing, falling to 0.68% in 2016 specifically. The coal capacity operation rate concerning low as well as depleted regions is generally strong, with limited space for expansion. In 2015 and 2016, the utilization rate of coal production potential in moderate-producing areas fell about 42%. Economic development variables affect the capacity utilization levels of moderate, weak, and depleted generating regions. At the same time, the price volatility cannot induce a practical improvement in the ability utilization rate, which means that China's coal industry is mainly un-marketized. China's energy efficiency increased about 19.98% among 2000 and 2016, while the rapidest expansion pattern has been noted in the eastern province at 39.86%, next to central (11.71%) and western regions (9.59%). The take back impact via the renewable energy and renewable productivity channels is estimated as 12.34% and 25.40%, respectively. Therefore, the take back impact is of significant importance regarding energy preservation, as China's cumulative renewable energy use is equal to China's aggregate energy use. On such findings, recent research also contributed by presenting novel policy implications for key stakeholders.
An optimal energy mix is a sine qua non for sustainable development. However, the global energy mix is sub-optimally dominated by fossils which endangers energy security and threatens the attainment of sustainable development. Understanding the convergence of energy series can assist the transition path to optimal energy mix and sustainable development. Thus, research on the convergence of several energy series has gained prominence in recent years. This study extends this important niche in the literature on the convergence of natural resources and environmental series by examining the convergence in energy diversification along several dimensions for a panel of 79 lower-middle, higher-middle, and high-income countries. As a departure from the existing studies, the study employs a novel methodology that allows abrupt or smooth changes through the Fourier approximation of smooth breaks, while including factor structures to test for the presence of unit roots in the relative energy diversification series. The results provide evidence of convergence of the energy diversification series in the majority of the considered countries, with 90% of the sample demonstrating convergence. A disaggregated country analysis was conducted and the findings show that 93% of the lower-middle-income countries are converging, while 95% of the upper-middle-income countries and 87% of the high-income countries are converging. Policy implications of the findings are also discussed.
The structural, mechanical, vibrational, electronic, optical, SLME, thermoelectric, and thermodynamic properties of X2GaAgCl6 (X = Cs, Rb), a double perovskite material, were computed by employing Density Functional Theory (DFT). CASTEP and Quantum ESPRESSO were used to perform first-principles calculations. X2GaAgCl6 possesses a cubic structure with the space-group symmetry Fm-3 m. The lattice parameters of Cs2GaAgCl6 and Rb2GaAgCl6 were optimized using the energy-volume curves, resulting in values of 7.357 Å and 7.365 Å, respectively. The population analysis confirmed the charge transfer among transition metals and halogen atoms. The stability of crystal X2GaAgCl6 (X = Cs, Rb) is effectively demonstrated by analyzing phonon dispersion curves with no negative frequencies. The band structure calculations indicated the semiconducting nature of compounds with energy gaps of 0.96 eV and 0.88 eV for Cs2GaAgCl6 and Rb2GaAgCl6, respectively. The optical characteristics results confirm that the examined materials are suitable for devices working, primarily in the electromagnetic spectrum's visible region. SLME results showed that Cs2GaAgCl6 has 30% and Rb2GaAgCl6 has 27% efficiency, respectively, suggesting their use in photovoltaics. The thermoelectric properties of X2GaAgCl6 (X = Cs, Rb) were calculated by using the BoltzTraP code in the temperature range of 300 to 800 K. The quasi-harmonic Debye model was applied to calculate the thermodynamic characteristics.
This study aimed to investigate how the decomposing scale effect, technique effect and composition effect of foreign direct investment (FDI) impact on carbon dioxide (CO2) emissions for 115 nations spanning 1999 to 2019 by employing Generalised Method of Moments (GMM) model. The results indicated that FDI, real GDP per capita, capital-labor ratio, institutional quality and urbanization increase CO2 emissions while the square of real GDP per capita and trade openness contributed to reducing CO2 emissions. Also, our findings fail to support Environmental Kuznets Curve (EKC) theory. The outcomes of this research illustrated that scale effect dominates composition effect and followed by technique effect. The interaction effect of FDI and technique effect has the least influence on CO2 levels in reducing the harmful effects of FDI on CO2. Furthermore, it should be highlighted that although FDI increases CO2 emissions, its detrimental impact on CO2 emissions is moderately mitigated by its interactions with three economic mechanisms. Therefore, it is necessary to enhance the technical processes of production as well as the development of modern technologies. We recommended that policymakers balance sustainable economic development with environmental sustainability by considering the indirect effects of factors on CO2 emissions.
This study examines the association between transportation services (i.e., passenger and freight) and carbon emissions concerning the US economy. The monthly data for this study were collected for the period from 2000 M1 to 2019 M8. In this study, QARDL econometric approach as discussed by Cho et al. (2015) has been used to tests the relationship between transportation services and CO2 emissions. Due to the chaotic and nonlinear behavior of our concerning variables, it was quite difficult to gauge the principle properties of their variations. Therefore, we relied on QARDL, which has been missing in previous researches. By utilizing the QARDL method, this research assesses the long-term stability of the nexus across the quantiles to provide an econometric framework that is more flexible than the traditional ones. In particular, the authors have analyzed how the quantiles of transportation (i.e., passenger and freight) influence the quantiles of CO2 emissions (environmental degradation). The empirical evidence revealed the negative significant relationship of both the transportation system (i.e., passenger and freight) with carbon emissions; however, this relationship holds at low quantiles of freight transport, whereas the same relationship has been observed at the majority of quantiles of passenger transport. So, this depicts that the transportation system of the USA helps to reduce CO2 emissions. Therefore, to maintain this situation, the government shall introduce more technologies that are fuel-efficient and promote clean consumption, thus reducing CO2 emissions, boosting economic growth, and making green transportation services.
A major issue for governments in the past few decades has been environmental deterioration caused by economic activity. Researchers are increasingly interested in the factors that contribute to environmental deterioration. This research fills the empirical gaps by looking at the influence of carbon footprints of growth and R&D investment on green finance development of renewable energy. Ordinary least square (OLS) is used in this work to assess the long-term connection between chosen variables in South Asia from 1995 to 2018. The importance of green finance, clean energy, and green financial instability have been identified as major variables. According to the study's overall findings, clean energy, green finance, and sustainable economic growth are all important and positive indicators of a composite assessment of sustainable practices. Green bonds, reducing greenhouse gas emissions, and green economic development all play an important part in green finance development and renewable energy production. The research also found that R&D expenditures had a positive and substantial influence on green finance development in South Asia, with a 1% increase in R&D expenditures lowering the sustainability of the environment by 0.070% and 0.080%. Other practical consequences for South Asia include a more suitable path toward a greener economy, as suggested by the projected findings.
Medical devices, being life-saving tools, are considered to be a boon for healthcare system. However, in addition to their therapeutic effects, there are several ill consequences that are caused by these devices. An effective cohort vigilant system was needed to manage such adverse effects. This had led to the introduction of materiovigilance. Materiovigilance is the study and follow-up of occurrences that arise as a result from the usage of the medical equipment. It not only manages adverse events (AE) but also creates harmonization among countries. Keeping these objectives in focus, the principles, perspectives, and practices with regard to materiovigilance that are followed in the USA, Europe, China, Japan, Australia, Canada, and India are being compared. Such a comparison is essential, which will help us to understand the gaps in the current regulatory systems in the above-mentioned countries and furthermore will provide a comprehensive picture to the regulatory authorities to amend any existing laws if required. These amendments may ensure optimal patient safety by providing them a benign experience from the use of medical devices.
Diabetes mellitus is a severe condition in which the pancreas produces inadequate insulin or the insulin generated is ineffective for utilisation by the body; as a result, insulin therapy is required for control blood sugar levels in patients having type 1 diabetes and is widely recommended in advanced type 2 diabetes patients with uncontrolled diabetes despite dual oral therapy, while subcutaneous insulin administration using hypodermic injection or pump-mediated infusion is the traditional route of insulin delivery and causes discomfort, needle phobia, reduced adherence, and risk of infection. Therefore, transdermal insulin delivery has been extensively explored as an appealing alternative to subcutaneous approaches for diabetes management which not only is non-invasive and easy, but also avoids first-pass metabolism and prevents gastrointestinal degradation. Microneedles have been commonly investigated in human subjects for transdermal insulin administration because they are minimally invasive and painless. The different types of microneedles developed for the transdermal delivery of anti-diabetic drugs are discussed in this review, including solid, dissolving, hydrogel, coated, and hollow microneedles. Numerous microneedle products have entered the market in recent years. But, before the microneedles can be effectively launched into the market, a significant amount of investigation is required to address the numerous challenges. In conclusion, the use of microneedles in the transdermal system is an area worth investigating because of its significant benefits over the oral route in the delivery of anti-diabetic medications and biosensing of blood sugar levels to assure improved clinical outcomes in diabetes management.
This study reports the concentrations of trace metals in core sediments profile from the coastal and four rivers estuary in the Kuching Division of Sarawak, Malaysia, and the controlling mechanisms influencing their availability in sediments of the studied area. The bonding of trace metals with non-mobile fractions was confirmed with the sequential extraction. Inductively coupled plasma-optical emission spectroscopy (ICP-OES) was used to measure the concentrations of the trace metals. Granulometric analyses were performed using normalized sieve apertures to determine the textural characteristics of the sediments. Enrichment factor was used to evaluate the level of metal enrichment. Heavy metals concentrations in sediment samples varied in the range: Pb (8.9-188.9 mg/kg d.w.), Zn (19.4-431.8 mg/kg d.w.), Cd (0.014-0.061 mg/kg d.w.), Ni (6.6-33.4 mg/kg d.w.), Mn (2.4-16.8 mg/kg d.w.), Cu (9.4-133.3 mg/kg d.w.), Ba (1.3-9.9 mg/kg d.w.), As (0.4-7.9 mg/kg d.w.), Co (0.9-5.1 mg/kg d.w.), Cr (1.4-7.8 mg/kg d.w.), Mg (68.8-499.3 mg/kg d.w.), Ca (11.3-64.9 mg/kg d.w.), Al (24.7-141.7 mg/kg d.w.), Na (8.8-29.4 mg/kg d.w.), and Fe (12,011-35,124.6 mg/kg d.w.). The estimated results of the enrichment factor suggested enrichments of Pb, Zn, and Cu in all the core sediment samples and depths at all sites. The other trace metals showed no enrichments in almost all the sampled stations. Continuous accumulation of Pb, Zn, and Cu metals over a period can be detrimental to living organisms and the ecology. The results obtained from the statistical analyses suggested that the deposition of trace metals in the studied sites is due to anthropogenic inputs from the adjacent land-based sources.
Surface sediments along the Southern Terengganu coast (≤7 km from the coast) were analyzed for polycyclic aromatic hydrocarbons (PAHs). The concentrations of 16 USEPA priority polycyclic aromatic hydrocarbons (ΣPAH16) ranged from 2.59 to 155 ng g-1 and their respective alkylated ranged between 8.80 and 24.90 ng g-1. Traces of acephenanthrylene, benzo[c]phenanthrene, thiophenic PAH, and benzonaphthofuran were identified. PAH diagnostic ratios and cross-plots revealed that these sedimentary PAH compounds are derived mainly from pyrogenic sources, primarily from biomass burning and petroleum combustion residues with minor petrogenic input. The high correlations between pyrogenic PAHs to total PAHs (r >0.73, p <0.5), and the Bap/Bep ratio to total PAHs (r = 0.88, p <0.5), suggest that atmospheric deposition and urban runoff are the main deposition pathways. The concentrations of the PAHs in the southern South China Sea fall in the moderate contamination range of 100-1000 ng g-1.
Climate change and tourism's interaction and vulnerability have been among the most hotly debated topics recently. In this context, the study focuses on how CO2 emissions, the primary cause of global warming and climate change, respond to changes in tourism development. In order to do so, the impact of tourism development on CO2 emissions in the most visited countries is investigated. A panel data from 2000 to 2017 for top 70 tourist countries are analysed using a spatial econometric method to investigate the spatial effect of tourism on environmental pollution. The direct, indirect, and overall impact of tourism on CO2 emissions are estimated using the most appropriate generalized nested spatial econometric (GNS) method. The findings reveal that tourism has a positive direct effect and a negative indirect effect; both are significant at the 1% level. The negative indirect effect of tourism is greater than its direct positive effect, implying an overall significantly negative impact. Further, the outcome of financial development and CO2 emissions have an inverted U-shaped and U-shaped relationship in direct and indirect impacts. Population density, trade openness, and economic growth significantly influence environmental pollution. In addition, education expenditure and infrastructure play a significant moderating role among tourism and environmental pollution. The results have important policy implications as they establish an inverted-U-shaped relationship among tourism and CO2 emissions and indicate that while a country's emissions initially rise with the tourism industry's growth, it begins declining after a limit.
Macroinvertebrate community in the intertidal setup plays an important role in coastal ecosystem functions and biogeochemical cycle. However, different land use pattern may influence on their community structure, diversity, and composition in the coastal ecosystems. Using Van-Veen grab sampler, 60 sediment samples were seasonally collected from mangroves-dominated, aquaculture-dominated, and anthropogenically affected area in the lower intertidal zone of the Kohelia channel of Bangladesh, the Northern Bay of Bengal. We have tasted the variation in sediment properties across three land-use types in this intertidal habitat. To understand the patterns of benthic macroinvertebrate distribution, a neutral community model was applied. Our results showed that community composition and biodiversity of the benthic macroinvertebrate communities varied significantly between mangrove-dominated area with anthropogenically affected areas among the four seasons. The neutral community model revealed that community assembly of benthic macroinvertebrates in the lower intertidal habitats is structured by stochastic processes while sediment properties have significant influence on species distribution and interactions. Results suggested that land-use changes altered sediment properties and could change the diversity and distribution of the macroinvertebrate communities in the lower intertidal habitats.
Coastal wetlands including salt marshes are among the most productive ecosystems on Earth. They are known for improving the quality of coastal water and provisioning coastal fisheries. However, this ecosystem is under potential threat due to urban coastal land reclamation, limited sediment supply, increased nutrient/eutrophication, and sea level rise. Therefore, restoration efforts to protect the degraded salt marsh habitat are considerably increasing worldwide. In this paper, we present an overview of salt marsh restoration techniques and success indicators. Published scientific literature in English language was collected by searching the most relevant keywords from popular search engines, namely, Google Scholar, Scopus, and Mendeley to get the information about salt marsh restoration techniques and success indicators. This study comprehensively reviewed data from 78 peer-reviewed papers. Results indicated that much of the salt marsh was restored through assisted abiotic strategies (e.g., recovery of tidal exchange, managed realignment, and sediment level amendment). A total of 214 indicators were found, spanning over six major ecological attributes such as structural diversity, ecosystem functions, physical conditions, species composition, external exchange, and absence of threat. Author keywords analysis revealed several hotspots for recent research (e.g., 16 s rRNA, fungi, microbial communities, carbon accumulation, and blue carbon). This paper proposes a model for restoring degraded salt marsh, as well as tracking their success. The information presented here will assist the marine ecosystem restoration practitioners in getting a comprehensive understanding of salt marsh restoration success evaluation.
The usage of waste for the development of sustainable building materials has received an increasing attention in socio-eco-environment spheres. The rice husk ash (RHA) produced during burning of rice husk and the ever-increasing plastic wastes are useless causing detrimental effects on the environment. This research supports the idea of sustainability and circular economy via utilization of waste to produce value-added products. This research explores the potential of waste plastics, RHA, and silica sand as thermoplastic composite materials. The different composite samples were prepared through waste plastics which includes low- and high-density polyethylene and polypropylene with incorporation of RHA and silica sand in proportions. The study investigates the effect of filler/polymer in 30/70, 20/80, and 10/90 (wt. %) on the workability of the developed composite materials. The workability of the composites was found to improve with filler reinforcement. The experimental results showed the maximum density of 1.676 g/cm3 and mechanical strength of 26.39, 4.89, and 3.25 MPa as compressive, flexural, and tensile strengths, respectively. The minimum percentage of water absorption was 0.052%. The wear tests resulted in a minimum abrasive and sliding wear rate of 0.03759 (cm3) and 0.00692 × 10-6 kg/m. The correlations between wear mechanisms and responses were morphologically analyzed. The developed composites verify the feasibility of RHA and plastics waste as a cost effective and environmentally competent product. The results and discussions provided a direction for the future research on sustainable polymeric composite materials.