MyMedR

Displaying publications 121 - 128 of 128 in total

Abstract:

Sort:

Fulltext Toxicity evaluation of zinc aluminium levodopa nanocomposite via oral route in repeated dose study

Kura AU, Cheah PS, Hussein MZ, Hassan Z, Tengku Azmi TI, Hussein NF, et al.

Nanoscale Res Lett, 2014;9(1):261.
PMID: 24948886 DOI: 10.1186/1556-276X-9-261

Nanotechnology, through nanomedicine, allowed drugs to be manipulated into nanoscale sizes for delivery to the different parts of the body, at the same time, retaining the valuable pharmacological properties of the drugs. However, efficient drug delivery and excellent release potential of these delivery systems may be hindered by possible untoward side effects. In this study, the sub-acute toxicity of oral zinc aluminium nanocomposite with and without levodopa was assessed using the Organization for Economic Co-operation and Development guidelines. No sign or symptom of toxicity was observed in orally treated rats with the nanocomposite at 5 and 500 mg/kg concentrations. Body weight gain, feeding, water intake, general survival and organosomatic index were not significantly different between control and treatment groups. Aspartate aminotransferase (AST) in 500 mg/kg levodopa nanocomposite (169 ± 30 U/L), 5 mg/kg levodopa nanocomposite (172 ± 49 U/L), and 500 mg/kg layered double hydroxides (LDH) nanocomposite (175 ± 25 U/L) were notably elevated compared to controls (143 ± 05 U/L); but the difference were not significant (p > 0.05). However, the differences in aspartate aminotransferase/alanine aminotransferase (AST/ALT) ratio of 500 mg/kg levodopa nanocomposite (0.32 ± 0.12) and 500 mg/kg LDH nanocomposite (0.34 ± 0.12) were statistically significant (p
Fulltext Performances of some low-cost counter electrode materials in CdS and CdSe quantum dot-sensitized solar cells

Jun HK, Careem MA, Arof AK

Nanoscale Res Lett, 2014 Feb 10;9(1):69.
PMID: 24512605 DOI: 10.1186/1556-276X-9-69

Different counter electrode (CE) materials based on carbon and Cu2S were prepared for the application in CdS and CdSe quantum dot-sensitized solar cells (QDSSCs). The CEs were prepared using low-cost and facile methods. Platinum was used as the reference CE material to compare the performances of the other materials. While carbon-based materials produced the best solar cell performance in CdS QDSSCs, platinum and Cu2S were superior in CdSe QDSSCs. Different CE materials have different performance in the two types of QDSSCs employed due to the different type of sensitizers and composition of polysulfide electrolytes used. The poor performance of QDSSCs with some CE materials is largely due to the lower photocurrent density and open-circuit voltage. The electrochemical impedance spectroscopy performed on the cells showed that the poor-performing QDSSCs had higher charge-transfer resistances and CPE values at their CE/electrolyte interfaces.
Fulltext Functionalization of graphene using deep eutectic solvents

Hayyan M, Abo-Hamad A, AlSaadi MA, Hashim MA

Nanoscale Res Lett, 2015 Dec;10(1):1004.
PMID: 26264683 DOI: 10.1186/s11671-015-1004-2

Deep eutectic solvents (DESs) have received attention in various applications because of their distinctive properties. In this work, DESs were used as functionalizing agents for graphene due to their potential to introduce new functional groups and cause other surface modifications. Eighteen different types of ammonium- and phosphonium-salt-based DESs were prepared and characterized by FTIR. The graphene was characterized by FTIR, STA, Raman spectroscopy, XRD, SEM, and TEM. Additional experiments were performed to study the dispersion behavior of the functionalized graphene in different solvents. The DESs exhibited both reduction and functionalization effects on DES-treated graphene. Dispersion stability was investigated and then characterized by UV-vis spectroscopy and zeta potential. DES-modified graphene can be used in many applications, such as drug delivery, wastewater treatment, catalysts, composite materials, nanofluids, and biosensors. To the best of our knowledge, this is the first investigation on the use of DESs for graphene functionalization.
Fulltext a-Si:H/SiNW shell/core for SiNW solar cell applications

Ashour ES, Sulaiman MY, Ruslan MH, Sopian K

Nanoscale Res Lett, 2013 Nov 06;8(1):466.
PMID: 24195734 DOI: 10.1186/1556-276X-8-466

Vertically aligned silicon nanowires have been synthesized by the chemical etching of silicon wafers. The influence of a hydrogenated amorphous silicon (a-Si:H) layer (shell) on top of a silicon nanowire (SiNW) solar cell has been investigated. The optical properties of a-Si:H/SiNWs and SiNWs are examined in terms of optical reflection and absorption properties. In the presence of the a-Si:H shell, 5.2% reflection ratio in the spectral range (250 to 1,000 nm) is achieved with a superior absorption property with an average over 87% of the incident light. In addition, the characteristics of the solar cell have been significantly improved, which exhibits higher open-circuit voltage, short-circuit current, and efficiency by more than 15%, 12%, and 37%, respectively, compared with planar SiNW solar cells. Based on the current-voltage measurements and morphology results, we show that the a-Si:H shell can passivate the defects generated by wet etching processes.
Fulltext Acute oral toxicity and biodistribution study of zinc-aluminium-levodopa nanocomposite

Kura AU, Saifullah B, Cheah PS, Hussein MZ, Azmi N, Fakurazi S

Nanoscale Res Lett, 2015;10:105.
PMID: 25852400 DOI: 10.1186/s11671-015-0742-5

Layered double hydroxide (LDH) is an inorganic-organic nano-layered material that harbours drug between its two-layered sheets, forming a sandwich-like structure. It is attracting a great deal of attention as an alternative drug delivery (nanodelivery) system in the field of pharmacology due to their relative low toxic potential. The production of these nanodelivery systems, aimed at improving human health through decrease toxicity, targeted delivery of the active compound to areas of interest with sustained release ability. In this study, we administered zinc-aluminium-LDH-levodopa nanocomposite (ZAL) and zinc-aluminium nanocomposite (ZA) to Sprague Dawley rats to evaluate for acute oral toxicity following OECD guidelines. The oral administration of ZAL and ZA at a limit dose of 2,000 mg/kg produced neither mortality nor acute toxic signs throughout 14 days of the observation. The percentage of body weight gain of the animals showed no significant difference between control and treatment groups. Animal from the two treated groups gained weight continuously over the study period, which was shown to be significantly higher than the weight at the beginning of the study (P
Fulltext Ag nanoparticle-deposited TiO2 nanotube arrays for electrodes of Dye-sensitized solar cells

Kawamura G, Ohmi H, Tan WK, Lockman Z, Muto H, Matsuda A

Nanoscale Res Lett, 2015;10:219.
PMID: 26019696 DOI: 10.1186/s11671-015-0924-1

ABSTRACT: Dye-sensitized solar cells composed of a photoanode of Ag nanoparticle (NP)-deposited TiO2 nanotube (TNT) arrays were fabricated. The TNT arrays were prepared by anodizing Ti films on fluorine-doped tin oxide (FTO)-coated glass substrates. Efficient charge transportation through the ordered nanostructure of TNT arrays should be carried out compared to conventional particulate TiO2 electrodes. However, it has been a big challenge to grow TNT arrays on FTO glass substrates with the lengths needed for sufficient light-harvesting (tens of micrometers). In this work, we deposited Ag nanoparticles (NPs) on the wall of TNT arrays to enhance light-harvesting property. Dye-sensitized solar cells with these Ag NP-deposited TNT arrays yielded a higher power conversion efficiency (2.03 %) than those without Ag NPs (1.39 %).
PACS CODES: 06.60.Ei Sample preparation, 81.05.Bx Metals, Semimetals, Alloys, 81.07.De Nanotubes.
Fulltext Production of Conductive PEDOT-Coated PVA-GO Composite Nanofibers

Zubair NA, Rahman NA, Lim HN, Sulaiman Y

Nanoscale Res Lett, 2017 Dec;12(1):113.
PMID: 28209034 DOI: 10.1186/s11671-017-1888-0

Electrically conductive nanofiber is well known as an excellent nanostructured material for its outstanding performances. In this work, poly(3,4-ethylenedioxythiophene) (PEDOT)-coated polyvinyl alcohol-graphene oxide (PVA-GO)-conducting nanofibers were fabricated via a combined method using electrospinning and electropolymerization techniques. During electrospinning, the concentration of PVA-GO solution and the applied voltage were deliberately altered in order to determine the optimized electrospinning conditions. The optimized parameters obtained were 0.1 mg/mL of GO concentration with electrospinning voltage of 15 kV, which displayed smooth nanofibrous morphology and smaller diameter distribution. The electrospun PVA-GO nanofiber mats were further modified by coating with the conjugated polymer, PEDOT, using electropolymerization technique which is a facile approach for coating the nanofibers. SEM images of the obtained nanofibers indicated that cauliflower-like structures of PEDOT were successfully grown on the surface of the electrospun nanofibers during the potentiostatic mode of the electropolymerization process. The conductive nature of PEDOT coating strongly depends on the different electropolymerization parameters, resulting in good conductivity of PEDOT-coated nanofibers. The optimum electropolymerization of PEDOT was at a potential of 1.2 V in 5 min. The electrochemical measurements demonstrated that the fabricated PVA-GO/PEDOT composite nanofiber could enhance the current response and reduce the charge transfer resistance of the nanofiber.
Fulltext Platinum-Based Catalysts on Various Carbon Supports and Conducting Polymers for Direct Methanol Fuel Cell Applications: a Review

Ramli ZAC, Kamarudin SK

Nanoscale Res Lett, 2018 Dec 22;13(1):410.
PMID: 30578446 DOI: 10.1186/s11671-018-2799-4

Platinum (Pt)-based nanoparticle metals have received a substantial amount of attention and are the most popular catalysts for direct methanol fuel cell (DMFC). However, the high cost of Pt catalysts, slow kinetic oxidation, and the formation of CO intermediate molecules during the methanol oxidation reaction (MOR) are major challenges associate with single-metal Pt catalysts. Recent studies are focusing on using either Pt alloys, such as Fe, Ni, Co, Rh, Ru, Co, and Sn metals, or carbon support materials to enhance the catalytic performance of Pt. In recent years, Pt and Pt alloy catalysts supported on great potential of carbon materials such as MWCNT, CNF, CNT, CNC, CMS, CNT, CB, and graphene have received remarkable interests due to their significant properties that can contribute to the excellent MOR and DMFC performance. This review paper summaries the development of the above alloys and support materials related to reduce the usage of Pt, improve stability, and better electrocatalytic performance of Pt in DMFC. Finally, discussion of each catalyst and support in terms of morphology, electrocatalytic activity, structural characteristics, and its fuel cell performance are presented.