The study was aimed to evaluate the effectiveness of maggot therapy in healing of cutaneous infected wound in streptozotocin (STZ) induced diabetic Wistar rat. For live maggots, the sterilized eggs of Lucilia sericata were obtained from colonies established in laboratory. Diabetes model was established in 48 male Wister rat by intra-peritoneal injection of STZ at the dose of 60 mg/kg body-weight. Cutaneous wounds exposed with mixed colonies of bacteria like Staphylococcus aureus, E. coli and Pseudomonas aeruginosa were prepared in all rat. The animals equally divided in 4 groups with 12 rats each being presented as treatment group of control, antibiotic, maggot and maggot with antibiotic in combination. All treatments were done once and hold for 24 hours. Wound kinetics and bacterial bio burden were measured at weekly interval to till complete healing. Significant reduction in wound area with maximum contraction was found (>95%) in maggot treated group when compared to antibiotic treated (79%) and control (72%). In maggot as well as maggot and antibiotic in combination group showed early elimination of bacterial bio-burden 7.88±0.03log CFU/ml to 1.12±0.65log CFU/ml and 7.86±0.04) log CFU/ml to 1.54±0.52log CFU/ml respectively in three weeks of time. Early healing indication was also experienced on histomorphological examination of wounded tissue of maggot treated groups by early and better epithelialization, collagenation and neovascularization with complete healing of wound in three weeks in comparison to antibiotic and control respectively. However, the present study did not show any difference in healing of wound with use of maggot alone or in antibiotic combination. Live maggot of Lucilia sericata effectively lower bacterial bioburden and and accelerate healing of infected cutaneous wound in diabetic conditions.
The current research discusses the development of poly (lactic acid) (PLA) and poly-(3-hydroxybutyrate-co-3-hydroxyvalerate) (PHBV) reinforced nanocrystalline cellulose bionanocomposites. The nanocrystalline cellulose was derived from waste oil palm empty fruit bunch fiber by acid hydrolysis process. The resulting nanocrystalline cellulose suspension was then surface functionalized by TEMPO-mediated oxidation and solvent exchange process. Furthermore, the PLA/PHBV/nanocrystalline cellulose bionanocomposites were produced by solvent casting method. The effect of the addition of nanocrystalline cellulose on structural, morphology, mechanical and barrier properties of bionanocomposites was investigated. The results revealed that the developed bionanocomposites showed improved mechanical properties and decrease in oxygen permeability rate. Therefore, the developed bio-based composite incorporated with an optimal composition of nanocrystalline cellulose exhibits properties as compared to the polymer blend.
In this study freely suspended and Ca-alginate immobilized C. vulgaris cells were used for the biosorption of Fe(II), Mn(II), and Zn(II) ions, from the aqueous solution. Experimental data showed that biosorption capacity of algal cells was strongly dependent on the operational condition such as pH, initial metal ions concentration, dosages, contact time and temperature. The maximum biosorption of Fe(II) 43.43, Mn(II) 40.98 and Zn(II) 37.43 mg/g was achieved with Ca-alginate immobilized algal cells at optimum pH of 6.0, algal cells dosage 0.6 g/L, and contact time of 450 min at room temperature. The biosorption efficiency of freely suspended and immobilized C. vulgaris cells for heavy metals removal from the industrial wastewater was validated. Modeling of biosorption kinetics showed good agreements with pseudo-second-order. Langmuir and D-R isotherm models exhibited the best fit of experimental data. The thermodynamic parameters (ΔG°, ΔH°, and ΔS°) revealed that the biosorption of considered metal ions was feasible, spontaneous and exothermic at 25-45°C. The SEM showed porous morphology which greatly helps in the biosorption of heavy metals. The Fourier transform infrared spectrophotometer (FTIR) and X-rays Photon Spectroscopy (XPS) data spectra indicated that the functional groups predominately involved in the biosorption were C-N, -OH, COO-, -CH, C=C, C=S and -C-. These results shows that immobilized algal cells in alginate beads could potentially enhance the biosorption of considered metal ions than freely suspended cells. Furthermore, the biosorbent has significantly removed heavy metals from industrial wastewater at the optimized condition.
The present study aims to develop a biodegradable polymer blend that is environmentally friendly and has comparable tensile and thermal properties with synthetic plastics. In this work, microcrystalline cellulose (MCC) extracted from bamboo-chips-reinforced poly (lactic acid) (PLA) and poly (butylene succinate) (PBS) blend composites were fabricated by melt-mixing at 180 °C and then hot pressing at 180 °C. PBS and MCC (0.5, 1, 1.5 wt%) were added to improve the brittle nature of PLA. Field emission scanning electron microscopy (FESEM), scanning electron microscopy (SEM), X-ray diffraction (XRD), Fourier transform infrared spectroscope (FTIR), thermogravimetric analysis (TGA), differential thermogravimetry (DTG), differential scanning calorimetry (DSC)), and universal testing machine were used to analyze morphology, crystallinity, physiochemical, thermal, and tensile properties, respectively. The thermal stability of the PLA-PBS blends enhanced on addition of MCC up to 1wt % due to their uniform dispersion in the polymer matrix. Tensile properties declined on addition of PBS and increased with MCC above (0.5 wt%) however except elongation at break increased on addition of PBS then decreased insignificantly on addition of MCC. Thus, PBS and MCC addition in PLA matrix decreases the brittleness, making it a potential contender that could be considered to replace plastics that are used for food packaging.
High surface area mesoporous activated carbon-alginate (AC-alginate) beads were successfully synthesized by entrapping activated carbon powder derived from Mangosteen fruit peel into calcium-alginate beads for methylene blue (MB) removal from aqueous solution. The structure and surface characteristics of AC-alginate beads were analyzed using Fourier transform infra-red (FTIR) spectroscopy, scanning electron microscopy (SEM) and surface area analysis (SBET), while thermal properties were tested using thermogravimetric analysis (TGA). The effect of AC-alginate dose, pH of solution, contact time, initial concentration of MB solution and temperature on MB removal was elucidated. The results showed that the maximum adsorption capacity of 230mg/g was achieved for 100mg/L of MB solution at pH 9.5 and temperature 25°C. Furthermore, the adsorption of MB on AC-alginate beads followed well pseudo-second order equation and equilibrium adsorption data were better fitted by the Freundlich isotherm model. The findings reveal the feasibility of AC-alginate beads composite to be used as a potential and low cost adsorbent for removal of cationic dyes.
Thraatchathi Chooranam (TC), is a polyphenol-rich Indian traditional medicine. Present study was undertaken to investigate the effects of TC against H2O2 induced oxidative stress and apoptotic damage in H9C2 cardiomyocytes. Cell viability assay indicated relative safety (IC50= 488.10±12.04 mg/ml) of TC. Pretreatment of cells with TC upregulated anti-apoptotic Bcl2, and anti-oxidants TRX1 and TRXR and downregulated Bax and HIF-α and inflammatory genes iNOS and TNF-α. Together, these findings show that TC has both anti-oxidant and anti-apoptotic properties. Further studies may be considered to identify the bioactive principle(s) and precise mechanisms of action of TC.
The present retrospective, single-center study evaluated the objective response rate (ORR) and progression-free survival (PFS) of epidermal growth factor receptor (EGFR) mutation-positive Malaysian patients with advanced lung adenocarcinoma treated with gefitinib. During May 2008 to July 2013, 33 patients with Stage IV, EGFR mutation-positive non-small-cell lung cancer (NSCLC) were identified and received gefitinib (250 mg) as first line treatment. The primary and secondary end points were ORR, PFS and safety, respectively. A total of 18 (54.5%) and 2 (6.1%) patients achieved partial response (PR) and complete response (CR) to gefitinib therapy, respectively, yielding an ORR of 60.6% (95% CI, 42.1-77.1%). Patients with exon 20 or 21 mutations (n=6, 66.7%) tended to have better ORR compared with exon 19 (n=22, 59.1%). The median PFS was 8.9 months in Malaysian patients with EGFR mutation-positive NSCLC, treated with gefitinib. The majority of treatment-related toxicity was mild in nature. The most frequently reported adverse events included dry skin (39.4%), skin rash (27.2%), and dermatitis acneiform (15.2%). In conclusion, Malaysian patients with locally advanced and metastatic EGFR mutation-positive NSCLC responded favorably to gefitinib therapy in terms of ORR, median PFS, and tolerability, the results of which were consistent with those of the IPASS study conducted in an Asian population. Considering the efficacy and safety profile of gefitinib, it is a favorable option for the first-line treatment of Malaysian patients with EGFR mutation-positive NSCLC. However, future long-term studies in a larger population of Malaysian patients are required to support whether the prolonged PFS conferred by gefitinib will translate into prolonged overall survival.