In industrial plants such as electricity generating, petroleum, chemical and petrochemical plants, pipelines are used extensively to transport liquid from one location to another. In radiation vulcanization of natural rubber latex (RVNRL) plants, pipelines are also used to transport latex to storage tank. During one of its maintenance activities, a pipeline intelligent gauge (PIG) that was used to monitor pipe integrity jammed inside the pipe causing interruption to its operation or loading activities. Sealed source technology was utilized to determine the location of jammed PIG in the pipeline. Fast neutrons from a 50 mCi Americium Beryllium (AmBe241), with energy range between 0.5 to11 MeV, were used for the study. Helium 3 (He3) detector was used to detect slow neutrons having a range of energy of 30 eV- 0.5 MeV. The investigation was carried out using neutron backscatter technique scanner. By adopting back-scattered technique, the location of jammed PIG in the pipeline has been successfully determined.
Paper recycling plants usually buy their raw material from suppliers. More than often, bulk used paper supplied to the plant contains some significant quantity of water in its internal voids. It may be included intentionally or unintentionally. The price of used paper depends on its weight, thus adding water will help to increase weight and consequently increase the price. In this way, plant owner who purchase the used paper suffers a significant of financial lost. The objectives of our experiment are to establish a calibration curve that correlate between the amount of neutron backscattered and water content, and finally to develop a correction factor that need to be introduced to the measured values of water content. A fast neutron source (Am-Be 241) and a portable backscattering neutron detector were used for water measurement. The experiments were carried out by measuring neutron backscattering from used paper that has been added with different amount of water. As a result, a neutron calibration curve that provides a correlation between neutron backscattering and water content was established.
The total mass attenuation coefficients (μ/ρ) of stainless steel (SS316L) and carbon steel (A516) that are widely used as petrochemical plant components, such as distillation column, heat exchanger, boiler and storage tank were measured at 662, 1073 and 1332 keV of photon energies. Measurements of radiation intensity for various thicknesses of steel were made by using transmission method. The γ-ray intensity were counted by using a Gamma spectrometer that contains a Hyper-pure Germanium (HPGe) detector connected with Multi Channel Analyzer (MCA). The effective numbers of atomic (Zeff) and electron (Neff) obtained experimentally were compared by those obtained through theoretical calculation. Both experimental and calculated values of Zeff and Neff were in good agreement.
Data transmission in field works especially that is related to industry, gas and chemical is paramount importance to ensure data accuracy and delivery time. A development of wireless detector system for remote data acquisition to be applied in conducting fieldwork in industry is described in this paper. A wireless communication which is applied in the project development is a viable and cost-effective method of transmitting data from the detector to the laptop on the site to facilitate data storage and analysis automatically, which can be used in various applications such as column scanning. The project involves hardware design for the detector and electronics parts besides programming for control board and user interface. A prototype of a wireless gamma scintillation detector is developed with capabilities of transmitting data to computer via radio frequency (RF) and recording the data within the 433MHz band at baud rate of 19200.
Non-destructive and real time method becomes a well-liked method to researchers in the oil palm
industry since 2000. This method has the ability to detect oil content in order to increase the
production of oil palm for better profit. Hence, this research investigates the potential of neutron
source to estimate oil content in palm oil fruit since oil palm contains hydrogen with chemical
formula C55H96O6. For this paper, oil palm loose fruit was being used and divided into three
groups. These three groups are ripe, under-ripe and bruised fruit. A total of 21 loose fruit for each
group were collected from a private plantation in Malaysia. Each sample was scanned using
neutron backscattered technique. The higher neutron count, the more hydrogen content, and the
more oil content in palm oil fruit. The best correlation result came from the ripe fruits with r2=0.98.
This research proves that neutron backscattered technique can be used as a non-destructive and
real time grading system for palm oil.