MyMedR

Displaying all 4 publications

Abstract:

Sort:

Fulltext Palm pressed fibre oil: a new opportunity for premium hardstock?

Neoh, B.K., Thang, Y.M., Zain, M.Z.M., Junaidi, A.

International Food Research Journal, 2011;18(2):769-773.
MyJurnal

Palm pressed fiber (PPF) is a by-product from oil extraction of oil palm fruits. It has unique characteristics resulting from the combination of palm mesocarp fiber, kernel shell and crushed kernel. The present study on different extraction methods for PPF indicated that conventional hexane cold extraction would be the more preferable method compared to soxhlet and reflux method due to the yield recovered (4.35%) and diacylglycerol (19.93% ± 0.07) obtained. Acylglycerol composition using cold extraction gave high Diaclyglycerol and Triacylglycerol (67.04% ± 0.05) with reasonable amount of Monoaclyglycerol / Free Fatty Acid (13.02% ± 0.02). Lauric acid which was not present in crude palm oil were found to be significant in PPF (5.89 to 9.09%), thus making this oil suitable for application in the food industry in products such as shortening and margarine.
Fulltext Survival probabilities and prognostic factors of pregnancy-associated breast cancer in Malaysian women

Abrar SS, Norsa'adah B, Yahya MM, Isa JA, Zon EM

Obstet Gynecol Sci, 2024 Jan;67(1):76-85.
PMID: 37985950 DOI: 10.5468/ogs.23151

OBJECTIVE: Pregnancy-associated breast cancer (PABC) is a rare cancer. This study aimed to determine the survival probabilities and prognostic factors in patients with PABC.
METHODS: A retrospective cohort study was conducted in two tertiary care hospitals in Kota Bharu. We included all patients with breast cancer who were diagnosed by histopathology while pregnant or within 2 years post-partum from 2001 through 2020. We matched patients with PABC to non-pregnant patients with breast cancer by age and year of diagnosis. The data were analyzed using Cox proportional hazard regression.
RESULTS: A total of 35 cases of PABC and 70 non-PABC controls were recruited. The 3-year, 5-year, and 10-year survival probabilities for patients with PABC were 58.6%, 47.54%, and 38.03%, respectively. The patients with PABC had a non-significant difference in survival probabilities compared with non-PABC patients. The significant prognostic factors of PABC were age (adjusted hazard ratio [aHR], 0.91; 95% confidence interval [CI], 0.86-0.96; P=0.001), advanced stage of cancer (aHR, 9.97; 95% CI, 3.96-25.2; P<0.001), and no surgery (aHR, 3.16; 95% CI, 1.01-9.85; P=0.047). Pregnancy was not found to be an independent factor in the prognosis of PABC (aHR, 0.72; 95% CI, 0.39-1.28; P=0.266).
CONCLUSION: Women diagnosed with PABC had similar survival probabilities compared with non-PABC patients. Pregnancy was not an independent prognostic factor for breast cancer. This information can be useful when women with breast cancer are counseled and supported with the option of beginning treatment with pregnancy continuation.
Utilization of polyphenylene sulfide as an organic additive to enhance gas separation performance in polysulfone membranes

Junaidi A, Zulfiani U, Khomariyah S, Gunawan T, Widiastuti N, Sazali N, et al.

RSC Adv, 2024 Jan 10;14(4):2311-2319.
PMID: 38213981 DOI: 10.1039/d3ra06136a

Many studies have shown that sulfur-containing compounds significantly affect the solubility of carbon dioxide (CO2) in adsorption processes. However, limited attention has been devoted to incorporating organic fillers containing sulfur atoms into gas separation membrane matrices. This study addressed the gap by developing a new membrane using a polysulfone (PSf) polymer matrix and polyphenylene sulfide (PPs) filler material. This membrane could be used to separate mixtures of H2/CH4 and CO2/CH4 gases. Our study investigated the impact of various PPs loadings (1%, 5%, and 10% w/w) relative to PSf on membrane properties and gas separation efficiency. Comprehensive characterization techniques, including Fourier-transform infrared spectroscopy (FTIR), X-ray diffraction (XRD), and scanning electron microscopy (SEM), were employed to understand how adding PPs and coating with polydimethylsiloxane (PDMS) changed the structure of our membranes. XRD and FTIR analysis revealed distinct morphological disparities and functional groups between pure PSf and PSf/PPs composite membranes. SEM results show an even distribution of PPs on the membrane surface. The impact of adding PPs on gas separation was significant. CO2 permeability increased by 376.19%, and H2 permeability improved by 191.25%. The membrane's gas selection ability significantly improved after coating the surface with PDMS. CO2/CH4 separation increased by 255.06% and H2/CH4 separation by 179.44%. We also considered the Findex to assess the overall performance of the membrane. The 5% and 10% PPs membranes were exceptional. Adding PPs to membrane technology may greatly enhance gas separation processes.
Fulltext Performance of a membrane fabricated from high-density polyethylene waste for dye separation in water

Zulfiani U, Junaidi A, Nareswari C, Ali BTI, Jaafar J, Widyanto AR, et al.

RSC Adv, 2023 Mar 08;13(12):7789-7797.
PMID: 36909764 DOI: 10.1039/d2ra07595d

Industrial growth can have a good impact on a country's economic growth, but it can also cause environmental problems, including water pollution. About 80% of industrial wastewater is discharged into the environment without treatment, of which 17-20% is dominated by dyes, such as methylene blue (MB) and methyl orange (MO) from the textile industry. Only about 5% of a textile dye is used in the dyeing process and the rest is discarded. This problem, of course, requires special handling considering the harmful effects to health. On the other hand, the abundance of plastic waste is increasing by 14% or 85 000 tons per year. This problem must be solved due to its film-forming properties. High-density polyethylene (HDPE) is one type of plastic used as a membrane material. Therefore, in this study, HDPE plastic waste was utilized as a membrane for dye removal. In this study, HDPE plastic waste was fabricated via a thermal-induced phase-separation method using mineral oil as a solvent at various concentrations of 8%, 10%, 13%, and 15% (w/w). All the membranes were characterized by scanning electron microscopy, Fourier transform infrared spectroscopy, and contact angle measurements. The results showed that the HDPE membrane at a concentration of 15% displayed the best performance compared to the others in terms of MB rejection. The negative charge (-36.9) of the HDPE membrane was more effective for cationic dye removal compared to the anionic dye. The flux and rejection of HDPE 15% for 100 ppm MB and MO removal were 2.71 and 4.93 L m-2 h-1, and 99.72% and 89.8%, respectively. The pure water flux of the membrane was 15.01 L m-2 h-1 and the tensile strength was 0.3435 MPa.