Biogas purification via water scrubbing produces effluent containing dissolved CH4, H2S, and CO2, which should be removed to reduce greenhouse gas emissions and increase its potential for water regeneration. In this study, a reactor built with air supplies at the top and bottom was utilized for the treatment of biogas purification effluent through biological oxidation and physical stripping processes. Up to 98% of CH4 was removed through biological treatment at a hydraulic retention time of 2 hr and an upper airflow rate of 2.02 L/day. Additionally, a minimum CH4 concentration of 0.04% with no trace of H2S gas was detected in the off gas. Meanwhile, a white precipitate was captured on the carrier showing the formation of sulfur. According to the developed mathematical model, an upper airflow rate of greater than 2.02 L/day showed a small deterioration in CH4 removal performance after reaching the maximum value, whereas a 50 L/day bottom airflow rate was required to strip the CO2 efficiently and raise the effluent pH from 5.64 to 7.3. Microbiological analysis confirmed the presence of type 1 methanotroph communities dominated by Methylobacter and Methylocaldum. However, bacterial communities promoting sulfide oxidation were dominated by Hyphomicrobium.
In recent years, the production of plastic has been estimated to reach 300 million tonnes, and nearly the same amount has been dumped into the waters. This waste material causes long-term damage to the ecosystem, economic sectors, and aquatic environments. Fragmentation of plastics to microplastics has been detected in the world's oceans, which causes a serious global impact. It is found that most of this debris ends up in water environments. Hence, this research aims to review the microbial degradation of microplastic, especially in water bodies and coastal areas. Aerobic bacteria will oxidize and decompose the microplastic from this environment to produce nutrients. Furthermore, plants such as microalgae can employ this nutrient as an energy source, which is the byproduct of microplastic. This paper highlights the reduction of plastics in the environment, typically by ultraviolet reduction, mechanical abrasion processes, and utilization by microorganisms and microalgae. Further discussion on the utilization of microplastics in the current technologies comprised of mechanical, chemical, and biological methods focusing more on the microalgae and microbial pathways via fuel cells has been elaborated. It can be denoted in the fuel cell system, the microalgae are placed in the bio-cathode section, and the anode chamber consists of the colony of microorganisms. Hence, electric current from the fuel cell can be generated to produce clean energy. Thus, the investigation on the emerging technologies via fuel cell systems and the potential use of microplastic pollutants for consumption has been discussed in the paper. The biochemical changes of microplastic and the interaction of microalgae and bacteria towards the degradation pathways of microplastic are also being observed in this review.