An improved laboratory technique for measurement of polonium-210(
210Po) in environmental
samples has been developed in Radiochemistry and Environmental Laboratory (RAS), Malaysian
Nuclear Agency. To further improve this technique, a study with the objectives to determine the
optimum conditions for
210Po deposition and; evaluate the accuracy and precision results for
the determination of 2 1 0 P o in environmental samples was carried-out. Polonium-210 which
is an alpha emitter obtained in acidic solution through total digestion and dissolution of samples
has been efficiently plated onto one side of the silver disc in the spontaneous plating process for
measurement of its alpha activity. The optimum conditions for deposition of 210Po were achieved
using hydrochloric acid (HCl) media at acidity of 0.5 M with the presence of 1.0 gram hydroxyl
ammonium chloride and the plating temperature at 90
oC. The plating was carried out in 80 mL
HCl solution (0.5 M) for 4 hours. The recorded recoveries obtained using 2 0 9 P o tracers in
the CRM IAEA-385 and environmental samples were 85% – 98% whereby the efficiency of the
new technique is a distinct advantage over the existing techniques. Therefore, optimization of
deposition parameters is a prime importance to achieve accuracy and precision results as well as
economy and time saving
Wood-based Industries was known to generate various airborne pollutants such as wood and dust. This study was conducted to determine air quality in wood-based Small and Medium Enterprises (SMEs) in Malaysia. The determination of total dust and respirable dust was conducted based on National Institute of Occupational Safety and Health (NIOSH) 0500 and 0600. Study found that 38.1% (n=16) of the total dust exceed 5 mg/m³ in Schedule 1 of USECHH 2000. None of the respirable dust concentration exceeds 5 mg/m3 of wood dust concentration by Schedule 1 of USECHH 2000 and OSHA but 4.8% (n = 2) had exceed 3mg/m3 by ACGIH. In conclusion, dust and total volatile organic compound was found in wood-based SME where few total dust concentrations for both workplace environment level had exceeded 5mg/m3 but none was seen for respirable dust concentration.
House dust was found to be a great indicator of metal pollutants for indoor air quality. This study aims to assess the level of metals in house dusts and identify the relationship between the composition of metals concentration in low cost apartment, Kuala Lumpur. Eight houses were selected randomly from four levels of low cost apartment buildings. The samples were collected using a brush and plastic pan and then the samples were digested. The compositions of metals were determined using Inductively Coupled Plasma-Optical Emission Spectrometer (ICP-OES) and statistical analysis was used to analyze the data by using Statistical Packages for the Social Sciences (SPSS). The results show that the highest concentration of metals obtained was Fe with the mean value of 1483.64 mg/kg followed by Zn with the mean value of 1197.07 mg/kg, while Cd recorded as the lowest mean value of 0.131 mg/kg. The trend distribution of metals in the investigated areas followed the order Fe > Zn > Cu > Pb > Cd. Statistical analysis indicates significant correlation between all the possible pairs of metals.