Displaying all 9 publications

Abstract:
Sort:
  1. Apenteng OO, Osei PP, Oduro B, Kwabla MP, Ismail NA
    Infect Dis Model, 2020;5:755-765.
    PMID: 33073067 DOI: 10.1016/j.idm.2020.09.009
    Malaysia is faced with a high HIV/AIDS burden that poses a public health threat. We constructed and applied a compartmental model to understand the spread and control of HIV/AIDS in Malaysia. A simple model for HIV and AIDS disease that incorporates condom and uncontaminated needle-syringes interventions and addresses the relative impact of given treatment therapy for infected HIV newborns on reducing HIV and AIDS incidence is presented. We demonstrated how treatment therapy for new-born babies and the use of condoms or uncontaminated needle-syringes impact the dynamics of HIV in Malaysia. The model was calibrated to HIV and AIDS incidence data from Malaysia from 1986 to 2011. The epidemiological parameters are estimated using Bayesian inference via Markov chain Monte Carlo simulation method. The reproduction number optimal for control of the HIV/AIDS disease obtained suggests that the disease-free equilibrium was unstable during the 25 years. However, the results indicated that the use of condoms and uncontaminated needle-syringes are pivotal intervention control strategies; a comprehensive adoption of the intervention may help stop the spread of HIV disease. Treatment therapy for newborn babies is also of high value; it reduces the epidemic peak. The combined effect of condom use or uncontaminated needle-syringe is more pronounced in controlling the spread of HIV/AIDS.
  2. Pang NTP, Kamu A, Mohd Kassim MA, Ho CM
    Infect Dis Model, 2021;6:898-908.
    PMID: 34377875 DOI: 10.1016/j.idm.2021.07.004
    Introduction: COVID-19 has affected almost every country in the world, which causing many negative implications in terms of education, economy and mental health. Worryingly, the trend of second or third wave of the pandemic has been noted in multiple regions despite early success of flattening the curve, such as in the case of Malaysia, post Sabah state election in September 2020. Hence, it is imperative to predict ongoing trend of COVID-19 to assist crucial policymaking in curbing the transmission.

    Method: Generalized logistic growth modelling (GLM) approach was adopted to make prediction of growth of cases according to each state in Malaysia. The data was obtained from official Ministry of Health Malaysia daily report, starting from 26 September 2020 until 1 January 2021.

    Result: Sabah, Johor, Selangor and Kuala Lumpur are predicted to exceed 10,000 cumulative cases by 2 February 2021. Nationally, the growth factor has been shown to range between 0.25 to a peak of 3.1 throughout the current Movement Control Order (MCO). The growth factor range for Sabah ranged from 1.00 to 1.25, while Selangor, the state which has the highest case, has a mean growth factor ranging from 1.22 to 1.52. The highest growth rates reported were in WP Labuan for the time periods of 22 Nov - 5 Dec 2020 with growth rates of 4.77. States with higher population densities were predicted to have higher cases of COVID-19.

    Conclusion: GLM is helpful to provide governments and policymakers with accurate and helpful forecasts on magnitude of epidemic and peak time. This forecast could assist government in devising short- and long-term plan to tackle the ongoing pandemic.

  3. Abdul Wahid NA, Suhaila J, Rahman HA
    Infect Dis Model, 2021;6:997-1008.
    PMID: 34466760 DOI: 10.1016/j.idm.2021.08.003
    Climate change is one of the critical determinants affecting life cycles and transmission of most infectious agents, including malaria, cholera, dengue fever, hand, foot, and mouth disease (HFMD), and the recent Corona-virus pandemic. HFMD has been associated with a growing number of outbreaks resulting in fatal complications since the late 1990s. The outbreaks may result from a combination of rapid population growth, climate change, socioeconomic changes, and other lifestyle changes. However, the modeling of climate variability and HFMD remains unclear, particularly in statistical theory development. The statistical relationship between HFMD and climate factors has been widely studied using generalized linear and additive modeling. When dealing with time-series data with clustered variables such as HFMD with clustered states, the independence principle of both modeling approaches may be violated. Thus, a Generalized Additive Mixed Model (GAMM) is used to investigate the relationship between HFMD and climate factors in Malaysia. The model is improved by using a first-order autoregressive term and treating all Malaysian states as a random effect. This method is preferred as it allows states to be modeled as random effects and accounts for time series data autocorrelation. The findings indicate that climate variables such as rainfall and wind speed affect HFMD cases in Malaysia. The risk of HFMD increased in the subsequent two weeks with rainfall below 60 mm and decreased with rainfall exceeding 60 mm. Besides, a two-week lag in wind speeds between 2 and 5 m/s reduced HFMD's chances. The results also show that HFMD cases rose in Malaysia during the inter-monsoon and southwest monsoon seasons but fell during the northeast monsoon. The study's outcomes can be used by public health officials and the general public to raise awareness, and thus, implement effective preventive measures.
  4. Tuite AR, Watts AG, Khan K, Bogoch II
    Infect Dis Model, 2019;4:251-256.
    PMID: 31667444 DOI: 10.1016/j.idm.2019.09.001
    Southern Thailand has been experiencing a large chikungunya virus (CHIKV) outbreak since October 2018. Given the magnitude and duration of the outbreak and its location in a popular tourist destination, we sought to determine international case exportation risk and identify countries at greatest risk of receiving travel-associated imported CHIKV cases. We used a probabilistic model to estimate the expected number of exported cases from Southern Thailand between October 2018 and April 2019. The model incorporated data on CHIKV natural history, infection rates in Southern Thailand, average length of stay for tourists, and international outbound air passenger numbers from the outbreak area. For countries highly connected to Southern Thailand by air travel, we ran 1000 simulations to estimate the expected number of imported cases. We also identified destination countries with conditions suitable for autochthonous CHIKV transmission. Over the outbreak period, we estimated that an average of 125 (95% credible interval (CrI): 102-149) cases would be exported from Southern Thailand to international destinations via air travel. China was projected to receive the most cases (43, 95% CrI: 30-56), followed by Singapore (7, 95% CrI: 2-12) and Malaysia (5, 95% CrI: 1-10). Twenty-three countries were projected to receive at least one imported case, and 64% of these countries had one or more regions that could potentially support autochthonous CHIKV transmission. The overall risk of international exportation of CHIKV cases associated with the outbreak is Southern Thailand is high. Our model projections are consistent with recent reports of CHIKV in travelers returning from the region. Countries should be alert to the possibility of CHIKV infection in returning travelers, particularly in regions where autochthonous transmission is possible.
  5. Wang Y, Zhao S, Wei Y, Li K, Jiang X, Li C, et al.
    Infect Dis Model, 2023 Sep;8(3):645-655.
    PMID: 37440763 DOI: 10.1016/j.idm.2023.05.008
    The potential for dengue fever epidemic due to climate change remains uncertain in tropical areas. This study aims to assess the impact of climate change on dengue fever transmission in four South and Southeast Asian settings. We collected weekly data of dengue fever incidence, daily mean temperature and rainfall from 2012 to 2020 in Singapore, Colombo, Selangor, and Chiang Mai. Projections for temperature and rainfall were drawn for three Shared Socioeconomic Pathways (SSP126, SSP245, and SSP585) scenarios. Using a disease transmission model, we projected the dengue fever epidemics until 2090s and determined the changes in annual peak incidence, peak time, epidemic size, and outbreak duration. A total of 684,639 dengue fever cases were reported in the four locations between 2012 and 2020. The projected change in dengue fever transmission would be most significant under the SSP585 scenario. In comparison to the 2030s, the peak incidence would rise by 1.29 times in Singapore, 2.25 times in Colombo, 1.36 times in Selangor, and >10 times in Chiang Mai in the 2090s under SSP585. Additionally, the peak time was projected to be earlier in Singapore, Colombo, and Selangor, but be later in Chiang Mai under the SSP585 scenario. Even in a milder emission scenario of SSP126, the epidemic size was projected to increase by 5.94%, 10.81%, 12.95%, and 69.60% from the 2030s-2090s in Singapore, Colombo, Selangor, and Chiang Mai, respectively. The outbreak durations in the four settings were projected to be prolonged over this century under SSP126 and SSP245, while a slight decrease is expected in 2090s under SSP585. The results indicate that climate change is expected to increase the risk of dengue fever transmission in tropical areas of South and Southeast Asia. Limiting greenhouse gas emissions could be crucial in reducing the transmission of dengue fever in the future.
  6. Absar N, Uddin N, Khandaker MU, Ullah H
    Infect Dis Model, 2022 Mar;7(1):170-183.
    PMID: 34977438 DOI: 10.1016/j.idm.2021.12.005
    The coronavirus disease that outbreak in 2019 has caused various health issues. According to the WHO, the first positive case was detected in Bangladesh on 7th March 2020, but while writing this paper in June 2021, the total confirmed, recovered, and death cases were 826922, 766266 and 13118, respectively. Due to the emergence of COVID-19 in Bangladesh, the country is facing a major public health crisis. Unfortunately, the country does not have a comprehensive health policy to address this issue. This makes it hard to predict how the pandemic will affect the population. Machine learning techniques can help us detect the disease's spread. To predict the trend, parameters, risks, and to take preventive measure in Bangladesh; this work utilized the Recurrent Neural Networks based Deep Learning methodologies like LongShort-Term Memory. Here, we aim to predict the epidemic's progression for a period of more than a year under various scenarios in Bangladesh. We extracted the data for daily confirmed, recovered, and death cases from March 2020 to August 2021. The obtained Root Mean Square Error (RMSE) values of confirmed, recovered, and death cases indicates that our result is more accurate than other contemporary techniques. This study indicates that the LSTM model could be used effectively in predicting contagious diseases. The obtained results could help in explaining the seriousness of the situation, also mayhelp the authorities to take precautionary steps to control the situation.
  7. Foo FY, Abdul Rahman N, Shaik Abdullah FZ, Abd Naeeim NS
    Infect Dis Model, 2024 Jun;9(2):387-396.
    PMID: 38385018 DOI: 10.1016/j.idm.2024.01.009
    At the end of the year 2019, a virus named SARS-CoV-2 induced the coronavirus disease, which is very contagious and quickly spread around the world. This new infectious disease is called COVID-19. Numerous areas, such as the economy, social services, education, and healthcare system, have suffered grave consequences from the invasion of this deadly virus. Thus, a thorough understanding of the spread of COVID-19 is required in order to deal with this outbreak before it becomes an infectious disaster. In this research, the daily reported COVID-19 cases in 92 sub-districts in Johor state, Malaysia, as well as the population size associated to each sub-district, are used to study the propagation of COVID-19 disease across space and time in Johor. The time frame of this research is about 190 days, which started from August 5, 2021, until February 10, 2022. The clustering technique known as spatio-temporal clustering, which considers the spatio-temporal metric was adapted to determine the hot-spot areas of the COVID-19 disease in Johor at the sub-district level. The results indicated that COVID-19 disease does spike in the dynamic populated sub-districts such as the state's economic centre (Bandar Johor Bahru), and during the festive season. These findings empirically prove that the transmission rate of COVID-19 is directly proportional to human mobility and the presence of holidays. On the other hand, the result of this study will help the authority in charge in stopping and preventing COVID-19 from spreading and become worsen at the national level.
  8. Waseel F, Streftaris G, Rudrusamy B, Dass SC
    Infect Dis Model, 2024 Jun;9(2):527-556.
    PMID: 38525308 DOI: 10.1016/j.idm.2024.02.010
    The COVID-19 pandemic has significantly impacted global health, social, and economic situations since its emergence in December 2019. The primary focus of this study is to propose a distinct vaccination policy and assess its impact on controlling COVID-19 transmission in Malaysia using a Bayesian data-driven approach, concentrating on the year 2021. We employ a compartmental Susceptible-Exposed-Infected-Recovered-Vaccinated (SEIRV) model, incorporating a time-varying transmission rate and a data-driven method for its estimation through an Exploratory Data Analysis (EDA) approach. While no vaccine guarantees total immunity against the disease, and vaccine immunity wanes over time, it is critical to include and accurately estimate vaccine efficacy, as well as a constant vaccine immunity decay or wane factor, to better simulate the dynamics of vaccine-induced protection over time. Based on the distribution and effectiveness of vaccines, we integrated a data-driven estimation of vaccine efficacy, calculated at 75% for Malaysia, underscoring the model's realism and relevance to the specific context of the country. The Bayesian inference framework is used to assimilate various data sources and account for underlying uncertainties in model parameters. The model is fitted to real-world data from Malaysia to analyze disease spread trends and evaluate the effectiveness of our proposed vaccination policy. Our findings reveal that this distinct vaccination policy, which emphasizes an accelerated vaccination rate during the initial stages of the program, is highly effective in mitigating the spread of COVID-19 and substantially reducing the pandemic peak and new infections. The study found that vaccinating 57-66% of the population (as opposed to 76% in the real data) with a better vaccination policy such as proposed here is able to significantly reduce the number of new infections and ultimately reduce the costs associated with new infections. The study contributes to the development of a robust and informative representation of COVID-19 transmission and vaccination, offering valuable insights for policymakers on the potential benefits and limitations of different vaccination policies, particularly highlighting the importance of a well-planned and efficient vaccination rollout strategy. While the methodology used in this study is specifically applied to national data from Malaysia, its successful application to local regions within Malaysia, such as Selangor and Johor, indicates its adaptability and potential for broader application. This demonstrates the model's adaptability for policy assessment and improvement across various demographic and epidemiological landscapes, implying its usefulness for similar datasets from various geographical regions.
  9. Lu X, Teh SY, Tay CJ, Abu Kassim NF, Fam PS, Soewono E
    Infect Dis Model, 2025 Mar;10(1):240-256.
    PMID: 39559512 DOI: 10.1016/j.idm.2024.10.007
    Despite the implementation of various initiatives, dengue remains a significant public health concern in Malaysia. Given that dengue has no specific treatment, dengue prediction remains a useful early warning mechanism for timely and effective deployment of public health preventative measures. This study aims to develop a comprehensive approach for forecasting dengue cases in Selangor, Malaysia by incorporating climate variables. An ensemble of Multiple Linear Regression (MLR) model, Long Short-Term Memory (LSTM), and Susceptible-Infected mosquito vectors, Susceptible-Infected-Recovered human hosts (SI-SIR) model were used to establish a relation between climate variables (temperature, humidity, precipitation) and mosquito biting rate. Dengue incidence subject to climate variability can then be projected by SI-SIR model using the forecasted mosquito biting rate. The proposed approach outperformed three alternative approaches and expanded the temporal horizon of dengue prediction for Selangor with the ability to forecast approximately 60 weeks ahead with a Mean Absolute Percentage Error (MAPE) of 13.97 for the chosen prediction window before the implementation of the Movement Control Order (MCO) in Malaysia. Extended validation across subsequent periods also indicates relatively satisfactory forecasting performance (with MAPE ranging from 13.12 to 17.09). This research contributed to the field by introducing a novel framework for the prediction of dengue cases over an extended temporal range.
Related Terms
Filters
Contact Us

Please provide feedback to Administrator (afdal@afpm.org.my)

External Links