The apparent second-order rate constant (k OH) for hydroxide-ion-catalyzed conversion of 1 to N-(2'-methoxyphenyl)phthalamate (4) is approximately 10(3)-fold larger than k OH for alkaline hydrolysis of N-morpholinobenzamide (2). These results are explained in terms of the reaction scheme 1 --> k(1obs) 3 --> k(2obs) 4 where 3 represents N-(2'-methoxyphenyl)phthalimide and the values of k(2obs)/k(1obs) vary from 6.0 x 10(2) to 17 x 10(2) within [NaOH] range of 5.0 x 10(-3) to 2.0 M. Pseudo-first-order rate constants (k(obs)) for alkaline hydrolysis of 1 decrease from 21.7 x 10(-3) to 15.6 x 10(-3) s(-1) with an increase in ionic strength (by NaCl) from 0.5 to 2.5 M at 0.5 M NaOH and 35 degrees C. The values of k obs, obtained for alkaline hydrolysis of 2 within [NaOH] range 1.0 x 10(-2) to 2.0 M at 35 degrees C, follow the relationship k(obs) = kOH[HO(-)] + kOH'[HO (-)] (2) with least-squares calculated values of kOH and kOH' as (6.38 +/- 0.15) x 10(-5) and (4.59 +/- 0.09) x 10(-5) M (-2) s(-1), respectively. A few kinetic runs for aqueous cleavage of 1, N'-morpholino-N-(2'-methoxyphenyl)-5-nitrophthalamide (5) and N'-morpholino-N-(2'-methoxyphenyl)-4-nitrophthalamide (6) at 35 degrees C and 0.05 M NaOH as well as 0.05 M NaOD reveal the solvent deuterium kinetic isotope effect (= k(obs) (H 2) (O)/ k(obs) (D 2 ) (O)) as 1.6 for 1, 1.9 for 5, and 1.8 for 6. Product characterization study on the cleavage of 5, 6, and N-(2'-methoxyphenyl)-4-nitrophthalimide (7) at 0.5 M NaOD in D2O solvent shows the imide-intermediate mechanism as the exclusive mechanism.
A kinetic study on the aqueous cleavage of N-(2-methoxyphenyl)phthalimide (1) and N-(2-hydroxyphenyl)phthalimide (2), under the buffers of N-methylmorpholine, reveals the equilibrium presence of monocationic amide (Ctam) formed due to nucleophilic reactions of N-methylmorpholine with 1 and 2. Pseudo-first-order rate constants for the reactions of water and HO- with Ctam (formed through nucleophilic reaction of N-methylmorpholine with 1) are 4.60 x 10(-5) s-1 and 47.9 M-1 s-1, respectively. But the cleavage of Ctam, formed through nucleophilic reaction of N-methylmorpholine with 2, involves intramolecular general base (2'-O- group of Ctam)-assisted water attack at carbonyl carbon of cationic amide group of Ctam in or before the rate-determining step.
The rates of the hydrolyses of N-(o-hydroxyphenyl)phthalimide (1) and N-(o-methoxyphenyl)phthalimide (2), studied at different pH, show that the hydrolysis of 1 involves intramolecular general base (IGB) assistance where the o-O- group of ionized 1 acts as IGB and H2O as the reactant. The rate enhancement due to the IGB-assisted reaction of H2O with ionized 1 is>8x10(4)-fold. Pseudo-first-order rate constant for the reaction of water with 2 is approximately 2x10(3)-fold smaller than the first-order rate constant (0.10 s-1) for pH-independent hydrolysis of 1 within the pH range of 9.60-10.10. Second-order rate constants (kOH) for hydroxide ion-assisted hydrolysis of ionized 1 and 2 are 3.0 and 29.1 M-1 s-1, respectively. The solvent deuterium kinetic isotope effect (dKIE) on the rate of alkaline hydrolysis of 1 and 2 reveals that the respective values of kOH/kOD are 0.84 and 0.78, where kOD represents the second-order rate constant for DO--assisted cleavage of these imides (1 and 2). The value of kwH2O/kdD2O is 2.04, with kwH2O and kdD2O representing pseudo-first-order rate constants for the reactions of ionized 1 with H2O and D2O, respectively.
A systematic study was undertaken to determine the influence of ortho'-substituted nucleophilic groups (OH, NH2, or NHR) on the reactivity of anodically generated 4-methoxy- and 3,4-dimethoxystilbene cation radicals. The results showed that when ortho-substituted nucleophilic groups such as OH and NHR are present in the other ring, both direct and crossover intramolecular cation-nucleophile reactions occur to give bisbenzofurans/bisindoles or fused bisbenzopyrans/bisquinolines, respectively. Where an additional 3-methoxy substituent is present, bridged oxocine/azocine products are formed in addition to the bisbenzopyrans/bisquinolines and bisbenzofurans/bisindoles. Mechanistic rationalization of the observed behavior is presented based on a generalized pathway involving fast cation radical dimerization following electron transfer, followed by direct and crossover trapping of the benzylic cations by the ortho-substituted oxygen and nitrogen nucleophilic groups. In the instances where an additional 3-methoxy group is present, the bridged oxocine/azocine products are also formed as a result of competing aromatic substitution (Friedel-Crafts reaction). The results have shed further light and provided additional clarification on the reactivity of anodically generated stilbene cation radicals.
The present investigation represents a continuation of studies on the effect of ortho'-substitution on the reactivity of anodically generated methoxystilbene cation radicals. Whereas previous studies have focused on the effect of ortho'-substituted nucleophilic groups such as OH, NH2, CH2OH, CH2NH2, and COOH, the present study extends the investigation to ortho'-substituted vinyl and formyl groups. The results show that when the ortho'-substituent is a vinyl group, the products include a bisdihydronaphthalene derivative and a doubly bridged, dibenzofused cyclononane from direct trapping of a bis carbocation intermediate. In the presence of an additional 3-methoxy substituent, the products are the tetracyclic chrysene derivatives. When the ortho'-substituent is a nonnucleophilic formyl group, the products include fused indanylnaphthalenes and indanylbenzopyran aldehydes. When an additional 3-methoxy group is present, an unusual fused benzofluorene-dibenzoannulene product is obtained. Mechanistic rationalization for the formation of the various products is presented. The results have contributed to a deeper understanding of how the reactivity of the methoxystilbene cation radicals is affected by the nature of the ortho'-substituents.
A systematic process is introduced to compare (13)C NMR spectra of two (or more) candidate samples of known structure to a natural product sample of unknown structure. The process is designed for the case where the spectra involved can reasonably be expected to be very similar, perhaps even identical. It is first validated by using published (13)C NMR data sets for the natural product 4,6,8,10,16,18-hexamethyldocosane. Then the stereoselective total syntheses of two candidate isomers of the related 4,6,8,10,16-pentamethyldocosane natural product are described, and the process is applied to confidently assign the configuration of the natural product as (4S,6R,8R,10S,16S). This is accomplished even though the chemical shift differences between this isomer and its (16R)-epimer are only ±5-10 ppb (±0.005-0.01 ppm).
A systematic study of the electrochemical oxidation of 1,2-diarylalkenes was carried out with the focus on detailed product studies and variation of product type as a function of aromatic substitution. A reinvestigation of the electrochemical oxidation of 4,4'-dimethoxystilbene under various conditions was first carried out, and all products formed were fully characterized and quantitated. This was followed by a systematic investigation of the effect of aromatic substitution on the nature and distribution of the products. The aromatic substituents were found to fall into three main categories, viz., substrates in which the nature and position of the aromatic substituents gave rise to essentially the same products as 4,4'-dimethoxystilbene, for example, tetraaryltetrahydrofurans, dehydrotetralins, and aldehydes (p-MeO or p-NMe2 on one ring and X on the other ring, where X = o-MeO or p-alkyl, or m- or p-EWG; e.g., 4-methoxy-4'-trifluoromethylstilbene); those that gave rise to a mixture of indanyl (or tetralinyl) acetamides and dehydrotetralins (or pallidols) (both or one ring substituted by alkyl groups, e.g., 4,4'-dimethylstilbene); and those where strategic placement of donor groups, such as OMe and OH, led to the formation of ampelopsin F and pallidol-type carbon skeletons (e.g., 4,3',4'-trimethoxystilbene). Reaction pathways to rationalize the formation of the different products are presented.
New oligonucleotide analogues with triazole internucleotide linkages were synthesized, and their hybridization properties were studied. The analogues demonstrated DNA binding affinities similar to those of unmodified oligonucleotides. The modification was shown to protect the oligonucleotides from nuclease hydrolysis. The modified oligonucleotides were tested as PCR primers. Modifications remote from the 3'-terminus were tolerated by polymerases. Our results suggest that these new oligonucleotide analogues are among the most promising triazole DNA mimics characterized to date.
Two new bisindole alkaloids, bisnicalaterines B and C (1 and 2) consisting of an eburnane and a corynanthe type of skeletons, were isolated from the bark of Hunteria zeylanica. Their absolute structures were determined by combination of NMR, CD, and computational methods, and each of them was shown to be in an atropisomeric relationship. Bisnicalaterines B and C (1 and 2) showed potent vasorelaxant activity on isolated rat aorta.
The effect of ortho'-substituted side chains bearing nucleophilic groups such as CH2OH, CH2NHR, and CO2H on the reactivity of anodically generated 4-methoxy- and 3,4-dimethoxystilbene cation radicals was investigated, and results were compared with those of substrates where the nucleophilic groups such as OH and NHR are directly attached to the aromatic ring. It was found that when ortho'-substituted groups such as CH2OH or CH2NHR are present in the other ring, only direct intramolecular cation-nucleophile reactions occur to give bisbenzopyrans or bisisoquinolines. Crossover products (previously obtained when the ortho' substituents were OH and NH2) such as the fused benzoxepanes/fused benzoazepanes were not formed. When the ortho' substituent is COOH, direct intramolecular cation-nucleophile reaction occurs to give the corresponding bis-δ-lactones in high yield. The presence of an additional 3-methoxy substituent resulted in the formation of other fused polycyclic products due to competing aromatic substitution reactions. Reaction pathways leading to the different products and reasons for the difference in behavior shown by the present stilbenes are presented. The results have provided additional insight into the reactivity and behavior of anodically generated stilbene cation radicals.
Apparent second-order rate constants (k(n)(app)) for the nucleophilic reaction of aniline (Ani) with phthalic anhydride (PAn) vary from 6.30 to 7.56 M(-1) s(-1) with the increase of temperature from 30 to 50 degrees C in pure glacial acetic acid (AcOH). However, the values of pseudo-first-order rate constants (k(s)) for the acetolysis of PAn in pure AcOH increase from 16.5 x 10(-4) to 10.7 x 10(-3) s(-1) with the increase of temperature from 30 to 50 degrees C. The values of k(n)(app) and k(s) vary from 5.84 to 7.56 M(-1) s(-1) and from 35.1 x 10(-4) to 12.4 x 10(-4) s(-1), respectively, with the increase of CH(3)CN content from 1% to 80% v/v in mixed AcOH solvents at 35 degrees C. The plot of k(s) versus CH(3)CN content shows a minimum (with 10(4) k(s) = 4.40 s(-1)) at 50% v/v CH(3)CN. Similarly, the variations of k(n)(app) and k(s) with the increasing content of tetrahydrofuran (THF) in mixed AcOH solvent reveal respective a maximum (with k(n)(app) = 17.5-15.6 M(-1) s(-1)) at 40-60% v/v THF and a minimum (with k(s) = approximately 0-1.2 x 10(-4) s (-1)) at 60-70% v/v THF. The respective values of DeltaH* and DeltaS* are 15.3 +/- 1.2 kcal mol(-1) and -20.1 +/- 3.8 cal K(-1) mol(-1) for k(s) and 1.1 +/- 0.5 kcal mol(-1) and -51.2 +/- 1.7 cal K(-1) mol(-1) for k(n)(app), while the values of k(n) (= k(n)(app)/f(b) with f(b) representing the fraction of free aniline base) are almost independent of temperature within the range 30-50 degrees C. A spectrophotometric approach has been described to determine f(b) in AcOH as well as mixed AcOH-CH(3)CN and AcOH-THF solvents. Thus, the observed data, obtained under different reaction conditions, have been explained quantitatively. An optimum reaction condition, within the domain of present reaction conditions, has been suggested for the maximum yield of the desired product, N-phenylphthalamic acid.
A slight modification of the Gabriel synthesis of primary amines is suggested on the basis of the observed and reported values of rate constants for the alkaline and acid hydrolyses of phthalimide, phthalamic acid, benzamide, and their N-substituted derivatives. The suggested procedure requires shorter reactions time and milder acid-base reaction conditions compared with the conventional acid-base hydrolysis in the Gabriel synthesis. A slight modification in the Ing-Manske procedure is also suggested. Pseudo-first-order rate constants, k(obs), for hydrolysis of N-phthaloylglycine, NPG, decrease from 24.1 x 10(-3) to 7.72 x 10(-3) and 6.12 x 10(-3) s(-1) with increasing acetonitrile and 1,4-dioxan contents, respectively, from 2 to 50% v/v (all the percentages given in the paper are vol %), while increasing the organic cosolvents content from 50 to 80% increases k(obs) from 7.72 x 10(-3) to 19.7 x 10(-3) s(-1) for acetonitrile and from 6.12 x 10(-3) to 52.8 x 10(-3) s(-1) for 1,4-dioxan, in aqueous organic solvents containing 0.004 M NaOH at 35 degrees C. The rate constants for NPG hydrolysis decrease from 2.11 x 10(-2) to 1.19 x 10(-4) s(-1) with increasing MeOH content from 2 to 84%, in aqueous organic solvents containing 2% MeCN and 0.004 M NaOH at 35 degrees C.
Pseudo-first-order rate constants obtained for methanolysis of ionized phenyl salicylate (PS(-)) at constant [MeOH], [MeCN], [NaOH] or [KOH], and [KBr] and at 35 degrees C show a decrease with the increase in [CTABr] (where CTABr represents cetyltrimethylammonium bromide) from 0.0-0.01 M. These observed data obey a pseudophase model of the micelle. The micellar binding constants (K(S)) of PS(-), pseudo-first-order rate constants (k(M)) for methanolysis of PS(-) in the micellar pseudophase and cmc are almost unchanged with the change in [NaOH] from 0.005-0.050 M. The increase in [KBr] from 0.0 to 0.3 M at 0.01 M KOH decreases K(S) from 5140 to 653 M(-)(1) and cmc from 1.9 x 10(-)(4) to 0.2 x 10(-)(4) M. Pseudo-first-order rate constants, k(M), are almost independent of [KBr] at 0.01 M KOH.
Effects of cetyltrimethylammonium bromide (CTABr) micelles on second-order rate constants (k(n)(obs)) for nucleophilic reactions of amines (piperidine and n-butylamine) with ionized phenyl salicylate (PS(-)) reveal a nonlinear decrease with the increase in [D(n)] (where [D(n)] = [CTABr](T) - cmc) at a constant [NaBr] and 35 degrees C. The observed data, at a constant [NaBr], fit reasonably well to a pseudophase model of micelles, and such a data fit gives kinetic parameters such as CTABr micellar binding canstant (K(S)) of PS(-). The effect of [NaBr] upon K(S) is explained with the empirical relationship K(S) = K(S)(0)/(1 + psi[NaBr]), where psi is an empirical parameter.
The remote groups in N-heterocyclic carbene (NHC) ligands have a significant influence on metal-catalyzed reactions. We examine how remote bulkiness, electronic groups, and expanded-ring NHCs (ER-NHCs) influence alkene reactivity and regioselectivity toward hydrocupration using density functional theory calculations. The impact of remote steric bulkiness on the Cu-H insertion rate is analyzed, revealing a strong correlation between the steric substituent constant and rate ratio, where a bulky group increases the rate due to reduced steric effects in the transition state (TS). The steric properties of the examined catalysts (with a remote group R2 = CPh3, CHPh2, CH2Ph, CH3, and H) and their corresponding TSs are found to be modulated greatly by the remote steric substitution group and the ring size of the NHC ligand. Enhanced bulkiness enhances the nucleophilic Cu-H moiety. The remote electronic groups have a smaller impact on insertion barrier compared to that of steric hindrance. Furthermore, ER-NHC exploration indicates that NHCs with over five-membered rings have a significantly negative influence on the reaction rate. Finally, with a highly bulky group (R2 = CPh3), anti-Markovnikov insertion preference is attributed to high interaction energy and improved steric properties. Overall, our findings here provide valuable insights for the development of a more effective catalyst in metal-catalyzed reactions.
A protocol for the construction of an angular tricyclic benzofuran skeleton based on the C-H activation strategy has been established. Different phthalide lactones on this skeleton can be easily assembled with various side chains by using C-H activation with aldehydes and subsequent reduction. This skeleton provides a versatile and crucial motif for the total synthesis of naturally occurring angular tricyclic benzofurans and their derivatives. Based on this protocol, the improved total syntheses of daldinin A and annullatin D were achieved in yields of 17.3 and 7.6%, respectively.