A series of Schiff bases have been successfully synthesized through the acid-catalyzed condensation of S-substituted dithiocarbazates and three enantiomerically pure monoterpenes, (1 R )-(+)-camphor, (1 S )-(-)-camphor, (1 R )-(-)-camphorquinone, (1 S )-(+)-camphorquinone, ( R )-(-)-carvone and ( S )-(+)-carvone. Spectroscopic results revealed that the Schiff bases containing camphor or carvone likely adopted an E -configuration along the characteristic imine bond while those containing camphorquinone assumed a Z -configuration. The antidengue potential of these compounds was evaluated based on DENV 2 caused cytopathic effect (CPE) reduction-based in vitro evaluation. The compounds were validated through secondary foci forming unit reduction assay (FFURA). Compounds were also tested for their cytotoxicity against Vero cells. The compounds showed variable degrees of antiviral activity with the camphor compounds displaying the highest antidengue potential. The enantiomers of the compounds behaved almost similarly during the antiviral evaluation.
A series of nine methyl sulphones ( 3a -3 i ) starting from the aldehydes ( 1a-1i ) were synthesized in two consecutive steps. In the first step, preparation of allyl alcohols ( 2a-2i ) from their corresponding aldehydes by the reaction of sodium borohydride in methanol at room temperature is reported. Finally, methyl sulphones are synthesized by condensing sodium methyl sulfinates with allyl alcohols in the presence of BF 3 .Et 2 O in acetic acid medium at room temperature for about 2-3 h. The reaction conditions are simple, yields are high (85%-95%), and the products were obtained with good purity. All the synthesized compounds were characterized by their 1 H, 13 C NMR, and mass spectral analysis. All the title compounds were screened for antimicrobial activity. Among the compounds tested, the compound 3f has inhibited both Gram positive and Gram negative bacteria effectively and compound 3i has shown potent antifungal activity. These promising components may help to develop more potent drugs in the near future for the treatment of bacterial and fungal infections.
In the current research work, a facile synthesis of a series of novel thiophene-based derivatives of 5-bromothiophene-2-carboxylic acid ( 1 ) have been synthesized. All analogs ( 5a - 5e , 10a - 10f ) were obtained from the coupling reaction of 5-bromothiophene-2-carboxylic acid ( 1 ) and different arylboronic acids with moderate-to-good yields under controlled and optimal conditions. The structures of the newly synthesized compounds were characterized through spectral analysis and their spasmolytic activity, and most of the compounds exhibited potentially good spasmolytic effect. Among the synthesized analogs, compound phenethyl 5-(3,4-dichlorophenyl)thiophene-2-carboxylate ( 10d ) particular showed an excellent spasmolytic effect with an EC 50 value of 1.26. All of the compounds were also studied for their structural and electronic properties by density functional theory (DFT) calculations. Through detailed insight into frontier molecular orbitals of the compounds and their different reactivity descriptors, it was found that the compounds 10c and 5c are the most reactive, while 10a is the most stable in the series. Furthermore, compounds 10c and 5c showed a very good NLO response with the highest β values.
This work introduces a new additive named 4,4'-trimethylenedipiperidine for the practical and ecofriendly preparation of ethyl 5-amino-7-(4-phenyl)-4,7-dihydro-[1,2,4]triazolo[1,5-a]pyrimidine-6-carboxylate derivatives. This chemical is commercially available and easy to handle. It also possesses a low melting point and a broad liquid range temperature, high thermal stability, and good solubility in water. Based on green chemistry principles, the reaction was performed in a) a mixture of green solvents i.e. water and ethanol (1:1 v/v) at reflux temperature, and b) the additive was liquefied at 65 °C and the reaction was conducted in the liquid state of the additive. High yields of the desired triazolo-pyrimidines were obtained under both aforementioned conditions. Our results demonstrated that this additive, containing 2 Lewis base sites and able to act as an acceptor-donor hydrogen bonding group, is a novel and efficient alternative to piperidine, owing to its unique properties such as its reduced toxicity, nonflammable nature, nonvolatile state, broad liquid range temperature, high thermal stability, and ability to be safely handled. Furthermore, this additive could be completely recovered and exhibited high recyclability without any change in its chemical structure and no significant reduction in its activity. The current methodology has several advantages: (a) it avoids the use of hazardous materials, as well as toxic, volatile, and flammable solvents, (b) it does not entail tedious processes, harsh conditions, and the multistep preparation of catalysts, (c) it uses a metal-free and noncorrosive catalyst, and (d) reduces the generation of hazardous waste and simple work-up processes. The most important result of this study is that 4,4'-trimethylenedipiperidine can be a promising alternative for toxic, volatile, and flammable base reagents in organic synthesis owing to its unique properties.
In the current protocol, the arene diazonium saccharin derivatives were initially produced from various substituted aromatic amines; subsequently, these intermediates were treated with a greener organic iodide for the preparation of the aryl iodide. We tried to choose low-cost, commercially available, biodegradable, recoverable, ecofriendly, and safe reagents and solvents. The arene diazonium saccharin intermediates could be stored in the liquid phase into a refrigerator for a long time with no significant loss activity. The outstanding merits of the current protocol (a) included the partial recovering of saccharin and tetraethylammonium salt, (b) reduce the use of solvents and the reaction steps due to eliminating separation and purification of intermediates, (c) good yield of the sterically hindered substrates, and (d) avoid the generation of heavy metal or corrosive waste.
This study involves the quantitative analysis of high free fatty acid crude palm oil, the separation of palmitic acid and synthesis of palm palmitic acid-based bioplastic. Synthesis of dimethyl 2-tetradecylmalonate (DMTDM) using methyl palmitate (MP) with sodium hydride (NaH) in the presence of reactive solvent of dimethyl carbonate (DMC) was carried out. The reaction conditions comprise at a mole ratio of MP: DMC: NaH: dimethylformamide (DMF) (0.1:2:0.25:1) at 60 °C for 14 h with 88.3 ± 1.4% yield. FTIR spectra of DMTDM showed the ester carbonyl group at 1740 cm-1. The polymerization of DMTDM with 1,6-hexandiol or 1,12-dodecandiol was carried out using titanium (IV) isopropoxide Ti(OiPr)4 as the catalyst and reaction time of 24 h. The results showed that the poly(dodecyl 2-tetradecylmalonte) (PDTDM) exhibited good thermal properties compared to poly(hexyl 2-tetradecylmalonte) (PHTDM). The increase of the chain length of diol in PDTDM improved the thermal properties of polyester with glass transition, Tg of 13 ºC and melting point of 51 ºC with a molecular weight of 12508 Da and polydispersity index (PDI) of 1.4. In general, the synthetic polyesters can be used as internalplasticizer in bio-based industry.
Liquid phase tandem Knoevenagel-Michael condensation of various aromatic and heteroaromatic aldehydes with barbituric acid or 2-thiobarbituric acid and malononitrile was studied in a one-pot three-component reaction. For the first time, TMDP was employed as a safe and efficient solvent and/or catalyst in the liquid and aqueous ethanol medium, respectively, for the practical and eco-friendly Knoevenagel-Michael condensation. The reactions were carried out by using greener procedures, including a) the use of TMDP as an N-heterocycle organocatalyst in a green medium including water and ethanol (1:1 v/v) at reflux temperature, and b) the use of TMDP as a dual solvent-catalyst at 65 °C in the absence of any solvent. High to excellent yields of the desired pyrano[2,3- d ]pyrimidinones were obtained under the two earlier mentioned conditions. The current methodologies have advantages, including (a) avoiding hazardous, toxic, volatile, and flammable materials and solvents, (b) avoiding tedious processes, harsh conditions, and multiple steps for the preparation of catalysts, (c) using a less toxic and noncorrosive catalyst, (d) minimizing hazardous waste generation and simple workup process, and (e) high recyclability of TMDP. Another important result of this work is that the TMDP can be a promising alternative for toxic, volatile, and flammable base reagents such as piperidine and triethylamine in liquid phase organic syntheses owing to its unique properties such as being less toxic, nonflammable, and nonvolatile, and having a low melting point, broad liquid range temperature, high thermal stability, and safe handling and storage.
This study focuses on the modification of natural hydroxyapatite (HAp) derived from clamshell by impregnation with palladium (Pd) at different pH in wet precipitation method to produce photoactive green materials for the degradation of synthetic dyes. It was found that, at pH 10, Pd has been successfully impregnated into HAp lattice with Ca/P ratio of 1.77 and particle distribution size range of 40-470 nm. The impregnation has resulted in the band gap of Pd/HAp at 3.19 eV, as calculated using Tauc's plot from the UV-Vis spectroscopy data of the Pd/HAp. Next, the photocatalytic activities of Pd/HAp were carried out with methyl oranges (MO) as models of water pollutants under UV irradiation. The photodegradation efficiency of the catalyst reached the optimum value of 41.63%, 48.17%, and 43.64% after 120 min of continuous UV irradiation for pH values 8, 10, and 11.5 of Pd/HAp samples, respectively. This study opens a new paradigm in using naturally derived materials as photocatalysts in the reduction of persistent water pollutants at a low cost and green sustainable approach.
In this study poly (4-nitrophenylazo-3-aminopyridine - formaldehyde) (PNAAP-F) and poly (4-nitroarylazo-3-chloro-6-hydroxypyridine - formaldehyde) (NAACHP-F) were synthesized via diazotization, coupling and polycondensation reactions. The structural properties of the as-synthesized dyes were acquired using Fourier-transform infrared spectroscopy (FTIR) and UV-visible absorption maxima and their color, yield, melting point, solubility, and viscosity were determined via standard methods. UV-visible and FTIR results show successful formation of the polymeric dyes due to shift of wavelength of maximum absorption (λmax) (440-490 nm, 480-540 nm) and new absorption peak at around (2780-2995 cm-1) for methylene bridge respectively. The dyes were found to be of good yield (monomeric: 73.3%-87.2 %, polymeric: 53.8%-76.6 %), low melting point (monomeric: 112.6-121.2, and 136.0-137.0 °C, while polymeric: 134.0-144.5, and 149.4-154.7 °C), soluble in some solvents. The dyeing activity was carried out and assessed on nylon and polyester fabrics using the standard methods. The dyeing process was carried out via high temperature and carrier dyeing methods. The dyeing properties of the synthesized dyes were compared with those of commercial disperse dyes (terasil brilliant violet and terasil scarlet, brown). The dyeings of nylon and polyester had a very attractive hue and the color ranges from yellow and deep yellow shades with very good to excellent fastness to light, washing, hot pressing, and rubbing.
The increase in new cases of drug resistance to first-line drugs such as ethambutol (ETB) makes it necessary to develop improvements for antituberculosis drugs. A new method for improving the bioavailability of active pharmaceutical ingredient (API) was investigated for preventing drug resistance and side-effects of antituberculosis drugs. In this study, an antituberculosis drug delivery system using β-cyclodextrin (β-CD) as the supramolecular carrier of ETB was prepared using the kneading method. The inclusion behaviour of β-CD/ETB inclusion complex in solid and liquid state was investigated. The inclusion complex was characterized using Fourier transform infrared spectroscopy, thermogravimetric analysis, nuclear magnetic resonance (NMR) spectroscopy, and UV-visible spectroscopy. The 1H and nuclear Overhauser effect spectroscopy NMR results indicated the hydrophobic interaction between β-CD and ETB. Meanwhile, the Benesi-Hildebrand equation was used to calculate the formation constant (K) of β-CD/ETB complex in natural condition, pH4, and pH9, which were 105.43, 107.06, and 119.11, respectively. The stoichiometry ratio of β-CD/ETB complex was proven to be 1:1.
The oxidation of ethylbenzene (EB) using tert-butyl hydroperoxide as the oxidizing agent was carried out in presence of gold nanoparticles (3 nm) supported on zinc oxide in acetonitrile solution. A higher selectivity towards acetophenone (ACP) as the major product, and a moderate selectivity towards other products such as 1-phenylethanol (PE), benzaldehyde (BZL), and benzoic acid (BzA) were observed using the prepared Au/ZnO nanocatalysts at 100 °C for 24 h. It is suggested the reaction produces an intermediate product, which is dimethylethyl-1-phenylethyl peroxide through a radical mechanism. A small amount of benzaldehyde was observed because benzaldehyde went autoxidation to form benzoic acid with the presence of oxidation agent of TBHP during reaction. The factors affecting the catalytic activity such as gold loading, calcination treatment at 300°C, type of solvent, reaction time, reaction temperature, oxidant to substrate molar ratio, catalyst weight, and solvent volume were studied. The gold nanoparticle catalyst synthesized by deposition precipitation method using urea was characterized by XRD, HRTEM, ATR-IR, XRF, and BET and offers a very selective reaction pathway for the oxidation of ethylbenzene.
The catalytic activity of poly(N-vinylimidazole), a biocompatible and biodegradable synthetic functional polymer, was investigated for the synthesis of oximes as an efficient, halogen-free, and reusable heterogeneous catalyst. The corresponding oximes were afforded in high to excellent yields at room temperature and in short times using the planetary ball mill technique. Some merits, such as the short reaction times and good yields for poorly active carbonyl compounds, and avoiding toxic, expensive, metal-containing catalysts, and hazardous and flammable solvents, can be mentioned for the current catalytic synthesis of the oximes. Furthermore, the heterogeneous organocatalyst could be easily separated after the reaction, and the regenerated catalyst was reused several times with no significant loss of its catalytic activity.