MyMedR

Displaying all 7 publications

Abstract:

Sort:

The value of cytology in granulomatous mastitis: a report of 16 cases from Malaysia

Yip CH, Jayaram G, Swain M

Aust N Z J Surg, 2000 Feb;70(2):103-5.
PMID: 10711470

BACKGROUND: Granulomatous mastitis is a rare condition of the breast that can mimic a carcinoma. There are characteristic histological features, the most important of which is a predominantly lobular inflammatory process. It must be differentiated from known causes of granulomatous inflammation, such as tuberculosis.
METHODS: In the present paper, the clinical and pathological features of 16 patients with granulomatous mastitis seen over a 3-year period in the University Hospital, Kuala Lumpur, are described.
RESULTS: A clinical suspicion of malignancy was present in 10 cases. One of the patients was nulliparous. One had an associated hyperprolactinaemia, while two had systemic lupus erythromatosis. One of the patients was pregnant at the time of presentation. Four patients had localized lumps excised, five were treated conservatively because the lesion was too extensive to resect, and seven patients required drainage procedures for abscess formation.
CONCLUSION: Awareness of this condition is important because it mimics a carcinoma, and surgery may not be the best treatment for recurrent disease.
Cytologic appearances in invasive lobular carcinoma of the breast. A study of 21 cases

Jayaram G, Swain M, Chew MT, Yip CH

Acta Cytol., 2000 Mar-Apr;44(2):169-74.
PMID: 10740602

OBJECTIVE: To examine the fine needle aspiration cytologic features of invasive lobular carcinoma of breast and to discuss problems that may occur in cytodiagnosis.

STUDY DESIGN: Fine needle aspiration cytologic smears from 21 cases of invasive lobular carcinoma (ILC) of breast were subjected to detailed cytomorphologic analysis. Features studied included pattern of cells, size of cells, nuclear placement, pleomorphism, presence of intracytoplasmic lumina (ICL) and signet ring cells.

RESULTS: Cellularity was generally moderate or high, and the pattern was predominantly or partly dissociated in 86% of cases. Rosettelike pattern was discerned in alveolar-type ILC. Cell size was usually small or intermediate, with nuclei placed eccentrically in most cases. ICLs with or without signet ring cells were present in 12 cases (57%).

CONCLUSION: A cytologic picture consisting of predominantly dissociated small or intermediate-sized tumor cells with eccentric nuclei, with some of the cells showing ICLs, is highly suggestive of ILC. Indian file pattern, another characteristic feature of ILC, is, however, focal and inconsistent. Variant patterns of ILC may show other cytologic features, such as rosettelike pattern (alveolar variant of ILC) or large cell pattern (pleomorphic variant of ILC) and may consequently be difficult to categorize on cytologic smears.
Fine-needle aspiration cytology of metastatic nasopharyngeal carcinoma

Jayaram G, Swain M, Khanijow V, Jalaludin MA

Diagn Cytopathol, 1998 Sep;19(3):168-72.
PMID: 9740988 DOI: 10.1002/(sici)1097-0339(199809)19:3<168::aid-dc2>3

Over a 32-month period at the University Hospital, Kuala Lumpur, we were able to study the cytological appearance of metastatic nasopharyngeal carcinoma (NPC) in 17 cases. This comprised 14 males and three females of which 13 were Chinese, three were Malay, and one was Indian. Their ages ranged from 27 to 64 years. Histological correlation was available in all the patients in the form of nasopharyngeal biopsies, and they were classified as per the World Health Organization classification into types I, II, and III NPC. Smears from type II NPC showed good cellularity with mainly clustered and occasionally dissociated cells, with focal columnar appearance, vesicular nuclei, prominent nucleoli, and variable amounts of cytoplasm. Clusters of malignant cell closely associated with lymphoid cells and dissociation of malignant cells were more characteristic of type III NPC. FNA cytology is now applied extensively to the diagnosis of head and neck tumours and knowledge of the cytomorphology of NPC would greatly aid in pinpointing the primary of this tumour which is notorious for presenting with early nodal metastasis.
Cytology of mucinous carcinoma of breast: a report of 28 cases with histological correlation

Jayaram G, Swain M, Chew MT, Yip CH, Moosa F

Malays J Pathol, 2000 Dec;22(2):65-71.
PMID: 16329537

Pure mucinous carcinoma (MC) of the breast is a relatively uncommon variant of breast carcinoma with distinctive histological and cytological features. In this study we have analysed fine needle aspiration (FNA) cytological material from 28 cases of MC of breast and correlated the cytomorphological features with histopathology. The 28 patients consisted of 27 females and one male patient. 14 patients were Chinese, 10 were Indian and four were Malay. Their ages ranged from 38 to 90 with a mean at 52 years. The left breast was involved in 17 and the right in 11 cases. The duration of the lump varied from two weeks to 10 years. The cytological picture was characterized by abundant extracellular mucin giving a "sea of mucin" or "whirlpools of mucin" effect, in which were seen floating clusters of tumour cells with relatively bland cytological features. Myxo-vascular fragments were seen in 12 cases. Dissociated tumour cells showed a plasmacytoid appearance with eccentric nuclei. In four cases, the mucin was scanty in amount and the cellularity was high while in two cases, the cellularity was very low. Psammoma bodies were seen in cytological smears in one case. Histological study of excision or mastectomy specimens confirmed all 28 cases to be pure MC. Knowledge of the distinctive cytomorphological appearance of MC would enable correct identification of these lesions as malignant and prompt treatment that could further enhance the survival of these prognostically good breast cancers.
Fulltext Biomechanics of oral mucosa

Chen J, Ahmad R, Li W, Swain M, Li Q

J R Soc Interface, 2015 Aug 06;12(109):20150325.
PMID: 26224566 DOI: 10.1098/rsif.2015.0325

The prevalence of prosthodontic treatment has been well recognized, and the need is continuously increasing with the ageing population. While the oral mucosa plays a critical role in the treatment outcome, the associated biomechanics is not yet fully understood. Using the literature available, this paper provides a critical review on four aspects of mucosal biomechanics, including static, dynamic, volumetric and interactive responses, which are interpreted by its elasticity, viscosity/permeability, apparent Poisson's ratio and friction coefficient, respectively. Both empirical studies and numerical models are analysed and compared to gain anatomical and physiological insights. Furthermore, the clinical applications of such biomechanical knowledge on the mucosa are explored to address some critical concerns, including stimuli for tissue remodelling (interstitial hydrostatic pressure), pressure-pain thresholds, tissue displaceability and residual bone resorption. Through this review, the state of the art in mucosal biomechanics and their clinical implications are discussed for future research interests, including clinical applications, computational modelling, design optimization and prosthetic fabrication.
A comparative study on complete and implant retained denture treatments: a biomechanics perspective

Chen J, Ahmad R, Suenaga H, Li W, Swain M, Li Q

J Biomech, 2015 Feb 5;48(3):512-9.
PMID: 25560272 DOI: 10.1016/j.jbiomech.2014.11.043

Although implant-retained overdenture allows edentulous patients to take higher occlusal forces than the conventional complete dentures, the biomechanical influences have not been explored yet. Clinically, there is limited knowledge and means for predicting localized bone remodelling after denture treatment with and without implant support. By using finite element (FE) analysis, this article provides an in-silico approach to exploring the treatment effects on the oral mucosa and potential resorption of residual ridge under three different denture configurations in a patient-specific manner. Based on cone beam computerized tomography (CBCT) scans, a 3D heterogeneous FE model was created; and the supportive tissue, mucosa, was characterized as a hyperelastic material. A measured occlusal load (63N) was applied onto three virtual models, namely complete denture, two and four implant-retained overdentures. Clinically, the bone resorption was measured after one year in the two implant-retained overdenture treatment. Despite the improved stability and enhanced masticatory function, the implant-retained overdentures demonstrated higher hydrostatic stress in mucosa (43.6kPa and 39.9kPa for two and four implants) at the posterior ends of the mandible due to the cantilever effect, than the complete denture (33.4kPa). Hydrostatic pressure in the mucosa signifies a critical indicator and can be correlated with clinically measured bone resorption, pointing to severer mandibular ridge resorption posteriorly with implant-retained overdentures. This study provides a biomechanical basis for denture treatment planning to improve long-term outcomes with minimal residual ridge resorption.
Fulltext Shape Optimization for Additive Manufacturing of Removable Partial Dentures--A New Paradigm for Prosthetic CAD/CAM

Chen J, Ahmad R, Suenaga H, Li W, Sasaki K, Swain M, et al.

PLoS One, 2015;10(7):e0132552.
PMID: 26161878 DOI: 10.1371/journal.pone.0132552

With ever-growing aging population and demand for denture treatments, pressure-induced mucosa lesion and residual ridge resorption remain main sources of clinical complications. Conventional denture design and fabrication are challenged for its labor and experience intensity, urgently necessitating an automatic procedure. This study aims to develop a fully automatic procedure enabling shape optimization and additive manufacturing of removable partial dentures (RPD), to maximize the uniformity of contact pressure distribution on the mucosa, thereby reducing associated clinical complications. A 3D heterogeneous finite element (FE) model was constructed from CT scan, and the critical tissue of mucosa was modeled as a hyperelastic material from in vivo clinical data. A contact shape optimization algorithm was developed based on the bi-directional evolutionary structural optimization (BESO) technique. Both initial and optimized dentures were prototyped by 3D printing technology and evaluated with in vitro tests. Through the optimization, the peak contact pressure was reduced by 70%, and the uniformity was improved by 63%. In vitro tests verified the effectiveness of this procedure, and the hydrostatic pressure induced in the mucosa is well below clinical pressure-pain thresholds (PPT), potentially lessening risk of residual ridge resorption. This proposed computational optimization and additive fabrication procedure provides a novel method for fast denture design and adjustment at low cost, with quantitative guidelines and computer aided design and manufacturing (CAD/CAM) for a specific patient. The integration of digitalized modeling, computational optimization, and free-form fabrication enables more efficient clinical adaptation. The customized optimal denture design is expected to minimize pain/discomfort and potentially reduce long-term residual ridge resorption.